DIgital noise after importing DV from JVC GR-DVL157

I am having difficulty getting clean audio from my JVC GR-DVL157 camcorder .
I have tried toggling the import preference for "filterr audio from Camera"
If I leave this option on, I get drop outs in the audio, and if I turn it off I get digital high pitched "noise" (obviously filtered out when this option is set).
Can anyone give any tips on what to do next?

I don't have a solution, just wanted to say that I have the same problem with my Sony camera, so it is not a hardware issue. I had turned off the filtering because of intolerable frequent sound dropouts, and I could live with the occasional high-pitched click. Since upgrading to 10.4.6, however, the high pitched digital noise is quite annoying, not constant but happening often and unpredictably, affecting both voices and instruments.
I also hope someone has some tips!

Similar Messages

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

Ok, the issue seem to be solved. The problem was this:
The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
And then LR is reading them and all metadata information has been set / read correctly.
So this is solved.

After Import AVCHD from Sony CX730, IMPOSSIBLE to put the video on the Timeline!!!!!

I have bought Premiere three days ago. I am working on a AVCHD project, with clips from a Sony FS700 (1080 50p), and clips from a Sony CX730 (1080 25p). I can import the clips but for the CX730 clips it is impossible to put them on the timeline!!!!!
I can put the audio (5-1) on audio 4, but impossible to put the video... Everybody told me that Premiere support all the codec on the same project... It is not true!!!
Why????

Yes! you are right, every thing work well now!! Thanks a lot!
With my best regards.
Eric Dragesco
Chalet Capercaillie
Route des Renards 57
CH - 1882 - Gryon
Tel : 0041 24 498 33 48
Tel : 0041 79 244 47 11
Email : [email protected]
Web : www.ericdragesco.com
Le 3 avr. 2015 à 13:48, Ann Bens <[email protected]> a écrit :
After Import AVCHD from Sony CX730, IMPOSSIBLE to put the video on the Timeline!!!!!
created by Ann Bens <https://forums.adobe.com/people/Ann+Bens> in Premiere Pro - View the full discussion <https://forums.adobe.com/message/7401902#7401902>
are you sure the track are source patched?
v1, etc on the very left of the timine
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7401902#7401902 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7401902#7401902
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Premiere Pro by email <mailto:[email protected]> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 81>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

After importing photos from a digital camera the thumbnails are blank.

I purchased a new iMac a few months ago and had no problem with transferring (and viewing) my iPhoto library onto the new computer. However, now when I import photos from my iPhone or camera, the thumbnails are blanks (with little dotted lines around them). In order to view the picture I must double-click on the image. This makes it a difficult to locate photos! Help me please.

I just got the iPod Classic and I don't see anywhere in the manual that I can still do this. Is it still possible to import my photos from the camera to the iPod?
No, the new iPods do not have a camera adaptor able to do this. Why Apple have decided not to make a suitable adaptor available (the old one won't work with the Classic), I have no idea.

Deafening Digital Noise After Mixdown of a 5.1 Bus

I'm having some issues that have just cropped up when I try to 'multitrack mixdown' a bus from my film project. This .sesx session originally was imported from a Premiere project. The project is about 90mins in length and I am trying to export multiple 5.1 stems from each 5.1 bus in my project (SFX, VO, Music, etc). I am using the 24bit/48kHz wav format in the export settings.
This worked fine before but has just now resulted in files that consist of crazy 0dBFS digital noise in 2 of the resulting mixdown stems. It started happening after implementing a music ducker that is triggered from the dialogue/VO track... not sure if that would trigger this result or not. Has anyone run into this sort of thing? If so, I'd love to hear the fix!
Thanks!
I'm running Adobe Audition CC on OSX 10.7.5 on a MacPro 1,1

OK, I disabled and removed the effect I had added and got the same result. I chose 3 busses to export as pictured below:
and here's a shot of the waveform - zoomed in. Thats the shrieking noise I mentioned in the OP. Thanks for the quick response! Hopefully we can sort this somehow.

How do i import video from JVC cam corder to my iMac?

Im trying ti import videos from my JVC GR D240 EK camcorder. When i plug the usb in it doesnt even recognaise it. i have tried to open it in Imovie but had no luck?

This is a mini-DV format camcorder. It will work with your Mac, but you need a Mac with a Firewire port, and you need a Firewire Cable.
Look in /About This Mac/More Info.../System Report/Hardware/Firewire to see if your Mac has Firewire and if so which type it has.
Older Macs will have a Firewire 400 port. You need a 6 pin to 4 pin Firewire Cable.
http://www.monoprice.com/products/product.asp?c_id=103&cp_id=10301&cs_id=1030102 &p_id=38&seq=1&format=2
More recent Macs may have a Firewire 800 port. You need a 4 pin to 9 pin Firewire Cable.
http://www.monoprice.com/products/product.asp?c_id=103&cp_id=10301&cs_id=1030104 &p_id=3541&seq=1&format=2
Some recent MacBooks are USB only. In this case you cannot import from the camera.
Some recent iMacs and MacBook Pros have Thunderbolt but not Firewire. In this case you need a 4 pin to 9 pin Firewire Cable and an Apple Thunderbolt to Firewire Adapter.
http://www.monoprice.com/products/product.asp?c_id=103&cp_id=10301&cs_id=1030104 &p_id=3541&seq=1&format=2
http://store.apple.com/us/product/MD464ZM/A/apple-thunderbolt-to-firewire-adapto r

Design view not working after importing project from Flex Builder

After importing a project from Flex Builder to Flash Builder I am no longer able to see anything in the design view. I am using the flex 4.5 sdk.
Any idea how I can get this design view working? I heard it could have something to do with the metadata directory but am slightly lost here?...
Adam

Could you please provide more information as to what exactly are you importing. Also does Design View not lauch at all or does it give errors. Would it be possible for you to share the logs.
Meanwhile you can try cleaning the workspace and importing again to see if that solves the issue.

After import, image from camera replaced with old (and incorrect) image

i imported photos this morning. maybe 200. into Lightroom 5.6 (with
camera raw 8.6, running on macosx 10.9.5; see below for "system info"). the images came from my
Leica M Typ 240, and were in raw format. after importing the images, i
went through them in my first editing pass.
going through, image 1867 ("L1001867.DNG") in LR was *not* the same as
image 1867 on my camera, but was, rather, an image (no longer on the
card in my camera) from 8 months ago in China.
the image on the camera was from 07.10.2014 15:49.15 (following one
taken at 15:49:07, which *did* show up in LR). the *meta* data in LR
appears correct for the image from the camera (i.e, shows a date of
07.10.2014, has likely exposure information, etc.), but the image itself
is the wrong image.
the image in LR *may* have been one i deleted (in LR), though i don't
know that for sure. if i *did* delete it, i deleted it months ago.
the LR image was shot on 22.02.2014 at 02:51-02:52 (i typically don't
change the clock). while i don't know for sure the image number of the
image in LR, it *appears* to be image 1419.
obviously, this is fairly worrying (as i count of LR to keep my
inventory!). what can i do to help you troubleshoot this? what can you
tell me about what is happening?
here is what "help:system info" says:
Lightroom version: 5.6 [974614]
License type: Perpetual
Operating system: Mac OS 10
Version: 10.9 [5]
Application architecture: x64
Logical processor count: 4
Processor speed: 2.9 GHz
Built-in memory: 8192.0 MB
Real memory available to Lightroom: 8192.0 MB
Real memory used by Lightroom: 1673.7 MB (20.4%)
Virtual memory used by Lightroom: 3555.8 MB
Memory cache size: 1608.3 MB
Maximum thread count used by Camera Raw: 2
Displays: 1) 2560x1600
Application folder: /Applications
Library Path: /Users/minshall/Pictures/Lightroom/Lightroom 5 Catalog.lrcat
Settings Folder: /Users/minshall/Library/Application Support/Adobe/Lightroom
Installed Plugins:
1) Behance
2) Canon Tether Plugin
3) Facebook
4) Flickr
5) Leica Tether Plugin
6) Nikon Tether Plugin
7) Photoshelter Archive Publisher
Config.lua flags: None
AudioDeviceIOBlockSize: 512
AudioDeviceName: Built-in Output
AudioDeviceNumberOfChannels: 2
AudioDeviceSampleRate: 44100
Build: Uninitialized
CoreImage: true
GL_ACCUM_ALPHA_BITS: 0
GL_ACCUM_BLUE_BITS: 0
GL_ACCUM_GREEN_BITS: 0
GL_ACCUM_RED_BITS: 0
GL_ALPHA_BITS: 8
GL_BLUE_BITS: 8
GL_DEPTH_BITS: 24
GL_GREEN_BITS: 8
GL_MAX_3D_TEXTURE_SIZE: 2048
GL_MAX_TEXTURE_SIZE: 16384
GL_MAX_TEXTURE_UNITS: 8
GL_MAX_VIEWPORT_DIMS: 16384,16384
GL_RED_BITS: 8
GL_RENDERER: Intel HD Graphics 4000 OpenGL Engine
GL_SHADING_LANGUAGE_VERSION: 1.20
GL_STENCIL_BITS: 8
GL_VENDOR: Intel Inc.
GL_VERSION: 2.1 INTEL-8.28.32
GL_EXTENSIONS: GL_ARB_color_buffer_float GL_ARB_depth_buffer_float
GL_ARB_depth_clamp GL_ARB_depth_texture GL_ARB_draw_buffers
GL_ARB_draw_elements_base_vertex GL_ARB_draw_instanced
GL_ARB_fragment_program GL_ARB_fragment_program_shadow
GL_ARB_fragment_shader GL_ARB_framebuffer_object GL_ARB_framebuffer_sRGB
GL_ARB_half_float_pixel GL_ARB_half_float_vertex GL_ARB_instanced_arrays
GL_ARB_multisample GL_ARB_multitexture GL_ARB_occlusion_query
GL_ARB_pixel_buffer_object GL_ARB_point_parameters GL_ARB_point_sprite
GL_ARB_provoking_vertex GL_ARB_seamless_cube_map GL_ARB_shader_objects
GL_ARB_shader_texture_lod GL_ARB_shading_language_100 GL_ARB_shadow
GL_ARB_sync GL_ARB_texture_border_clamp GL_ARB_texture_compression
GL_ARB_texture_compression_rgtc GL_ARB_texture_cube_map
GL_ARB_texture_env_add GL_ARB_texture_env_combine
GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_float
GL_ARB_texture_mirrored_repeat GL_ARB_texture_non_power_of_two
GL_ARB_texture_rectangle GL_ARB_texture_rg GL_ARB_transpose_matrix
GL_ARB_vertex_array_bgra GL_ARB_vertex_blend GL_ARB_vertex_buffer_object
GL_ARB_vertex_program GL_ARB_vertex_shader GL_ARB_window_pos GL_EXT_abgr
GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_equation_separate
GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract
GL_EXT_clip_volume_hint GL_EXT_debug_label GL_EXT_debug_marker
GL_EXT_draw_buffers2 GL_EXT_draw_range_elements GL_EXT_fog_coord
GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample
GL_EXT_framebuffer_object GL_EXT_framebuffer_sRGB
GL_EXT_geometry_shader4 GL_EXT_gpu_program_parameters GL_EXT_gpu_shader4
GL_EXT_multi_draw_arrays GL_EXT_packed_depth_stencil GL_EXT_packed_float
GL_EXT_provoking_vertex GL_EXT_rescale_normal GL_EXT_secondary_color
GL_EXT_separate_specular_color GL_EXT_shadow_funcs
GL_EXT_stencil_two_side GL_EXT_stencil_wrap GL_EXT_texture_array
GL_EXT_texture_compression_dxt1 GL_EXT_texture_compression_s3tc
GL_EXT_texture_env_add GL_EXT_texture_filter_anisotropic
GL_EXT_texture_integer GL_EXT_texture_lod_bias GL_EXT_texture_rectangle
GL_EXT_texture_shared_exponent GL_EXT_texture_sRGB
GL_EXT_texture_sRGB_decode GL_EXT_timer_query GL_EXT_transform_feedback
GL_EXT_vertex_array_bgra GL_APPLE_aux_depth_stencil
GL_APPLE_client_storage GL_APPLE_element_array GL_APPLE_fence
GL_APPLE_float_pixels GL_APPLE_flush_buffer_range GL_APPLE_flush_render
GL_APPLE_object_purgeable GL_APPLE_packed_pixels GL_APPLE_pixel_buffer
GL_APPLE_rgb_422 GL_APPLE_row_bytes GL_APPLE_specular_vector
GL_APPLE_texture_range GL_APPLE_transform_hint
GL_APPLE_vertex_array_object GL_APPLE_vertex_array_range
GL_APPLE_vertex_point_size GL_APPLE_vertex_program_evaluators
GL_APPLE_ycbcr_422 GL_ATI_separate_stencil GL_ATI_texture_env_combine3
GL_ATI_texture_float GL_ATI_texture_mirror_once GL_IBM_rasterpos_clip
GL_NV_blend_square GL_NV_conditional_render GL_NV_depth_clamp
GL_NV_fog_distance GL_NV_light_max_exponent GL_NV_texgen_reflection
GL_NV_texture_barrier GL_SGIS_generate_mipmap GL_SGIS_texture_edge_clamp
GL_SGIS_texture_lod

it appears the actual image is probably in place, but the *preview* is incorrect. clicking on the image to zoom in causes (the normal) "Loading...", followed by a zoomed in view of the *correct* image. zooming back out gives the normal view of the correct image. (*very* good to know!)

Duplicate after importing iTunes from old to new system

Justy upraded to a MacBookPro and moved my iTunes library (media + playlist) from old windows notebook. After importing I have duplicates songs and playlist. I followed the instructions provided on this forum for exporting/importing only the media files and playlist. My library is very large and removing individual songs/playlist would be time comsuming. Anotyher twisty is some songs are he same but with a different artist. Any suggestions. Koyangie

If you are a resident of the U.S. and have iTunes 10.3 or later installed on the new computer, you can re download your iTunes purchases for free without having to import.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Make sure and use the same Apple ID as on the prior computer.
On the new computer, launch iTunes. From the menu bar click Store / Authorize This Computer before trying re download your purchases.

BRAND NEW APPLE USER IN DESPERATE NEED OF HELP IMPORTING VIDEOS FROM JVC!!!

I have an older JVC Everio. I have probably had it for 3 or 4 years. I don't exactly remember. Anyway, I have always used Dell products and they were tough to download videos to as well. What my issue is is that I have a Free Agent External Hard Drive with all my video files saved in the JVC .MOD format. When I open iMovie (version 7.1.1) and try to import the files from the external hard drive it doesn't even recognize these files as video files. I am no computer wizard (maybe that is obvious) and I could really use some basic help. I want to love this machine. I bought it for the video/photo capabilities. I shoot a Canon XTi 10.2 Rebel and have about 10,000 photos saved on the same external hard drive. I am looking forward to learning how to do this, but could use some much needed advice!!
Thanks!
Hoov

I believe this is what you want.
And, here's another: MPEG Streamclip .
The Cyberlink Prodirector software that came with the CamCorder or is available from JVC will also convert to other formats, but it isn't a Mac compatible program.
And, this site outlines how to import the files into iMovie.
Message was edited by: Kappy

Import file from JVC GZ-HD7 camcorder on LEOPARD (FCP)

Hi,
I'm still unable to import the file from JVC GZ-HD7 by using Final Cut Pro on Leopard!!!
I'm trying to use the Mpeg Streamclips to open the TOD extension and convert it into Mov file...but while i trying to open the file ,Mpeg Streamclips shown the info that i can't read the file and even export it because i don't have the component of MPEG2 PLAYBACK...infact,i already installed!!!
Strange...what's happening?help...
Thanks

Help Help...

HELP!! importing footage from JVC EVERIO HD Camcorder to FCP

Hi there,
I 'm trying to import files from a JVC Everio HD Camcorder into FCP then convert to QT or MPEG files. Can anyone advise on how to extract the .mov files from the camera?

Hey, Ive tried this as well installed the quicktime component and it doesnt seem to want to open any of the tod files in quicktime to convert it... gives me an error message saying the movie is an incorrect duration or something
Message was edited by: Spielberg Disciple

Cannot edit chapter names in iDVD after importing movie from iMovie

I have no trouble customizing iDVD (version 5.0.1) menu page after importing iMovie directly (instead of going to QT as interim step). But the names of the chapter markers are file names for video clips, title pages and transitions. The iMovie help says to change the names in the space next to the 'thumbnails' of chapters found in iDVD. THERE ARE NO THUMBNAILS. And there is no way I could find, using menu options or clicking on the chapter frames shown in 'map' mode to type in anything.
There are other problems, like getting rid of the default "Travel Cards' stuff...like I can drop a still photo in for a custom background, but the default 'celluloid design' banner still rolls up in previw mode. If you can also help with that, great. But the main thing right now is getting these chapter names change.

VJK,
You are the third person who has taken a crack at this. I don't know if you read my last reply which detailed the situation. But if you did and the 'menu' you refer to is the main menu page, that is not the problem; I can change text there. I am talking about the submenu for 'Scene Selections', which I have only been able to access via map mode.
In map mode I cannot highlight the names. Period. Can't do it no matter where I place the cursor or carefully click.
In preview mode, when the Scene Selection sub-menu page appears whenever you drag the cursor over a chapter name it automatically highlights so any clicking will either do nothing (if a real careful click, trying to highlight text and not trigger off play of the movie chapter) or just start play for the movie chapter.
So...how does this newbie get to the 'menu' you mention where I can click on a chapter name in order to type new text?
You will be able to change the names in the menu, but
depending upon your mouse, etc, it can be a little
particular.
Place the cursor at the very beginning of the word
you want to change. Click once .. this should hi-lite
the word. Click again, it should make the word go
blue (or in a blue box) then you can delete and
re-type.
Be sure to save the proj
I have found that even after saving and successfully
burning the project, if I return to it later the
changes seem to have gone away ... so if you go back
to it later, just double check that everything is
kosher

I want to edit the text within Captivate after importing slides from PowerPoint

Hi,
Background: I import slides from a .pptx file. Once the slides are created inside of Captivate, I want to edit the text on the slide, but I can't; it's all become part of the background. So, I am left with two options: 1) open the .pptx file, edit the text, and then re-import the slide 2) Manually create everything on the slide inside of Captivate. This is so labor-intensive. I was hoping Captivate 7 would address this, but what seemed could possible address it - High Fidelity - isn't available for mac. I'm sure others have this problem too.
Any help would be greatly appreciated.

Maybe you'd better look at Adobe Presenter if you need only to convert a PPT to an eLearning course?
Captivate is much more powerful, but its principal goal is not to convert PPT's. Each PPT-slide is converted into a movie slide so that all animations will be transferred properly. Personally I never create presentations in PPT but always directly in CP. You could import only the backgrounds, and create the other objects in CP. Images can be imported into the library, audio as well.
Lilybiri

Need to undo set up after importing contents from old Macse

I just set up my new MB pro with OX X Mavericks. I choosed the option of "import contents from other mac" and brought my entire user identity and contents from my old MB air. But it created a whole new user identity in my new computer. I don't like it and want to undo it and start all set up again from the begining. Any ideas of how to do it. I have all my contentes backuped, so I'm not worried about that... By the way, I heard many times that it was not a good idea to start using a new Mac bringing all contents from your old one this way. Any comments to this?

You typed you migrated from your old partners PC - try using their password. It sounds like you've done what is in these articles, but maybe there will be something new.
Reset Password
Reset Password using Apple ID
If you can see the other computer in Finder, try drag and drop copying the files. Can you copy the files to a Flash drive or external hard drive and then download them?

DIgital noise after importing DV from JVC GR-DVL157

Similar Messages

Maybe you are looking for