Digital@nywhere and Windows 7

Hello all,
I have been using my Digital@nywhere card for a few years now, with no problems. However, as I upgraded my OS to Windows 7, after reinstalling the drivers and the software, the software does not run. Whenever I click on the TVR button, I get an error that says this: Access violation at address 0002111D in module 'kwusbdll.dll'. Read of address 0000000. And then I will have to close the program in the taskbar. I have tried to run the software in the compatibility mode of Windows XP to no success. I have also tried to reinstall the program using the setup found here: http://eu.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=132&prod_no=642 but the problem is still there. Is there a way to fix this problem, or perhaps another DTVR application I can use?

Yes and yes.
I tried that program in the sticky, ScanChannelsBDA_UK, and when I choose my country (Australia) I get this error saying it failed to connect filters to graph. Here is the log if it helps:
Build - v2.8.1.0
Checking for new BDA DVB-T Cards
Tuner - Xpert BDA DVB-T Tuner/Demod
@device:pnp:\\?\stream#cxbdatune.ven_14f1.samsungdvbt#5&29d22fe9&4&1#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{91b0cc87-9905-4d65-a0d1-5861c6f22cbf}
Finding Demod and Capture filters
Trying - Conexant 2388x Transport Stream Capture
@device:pnp:\\?\pci#ven_14f1&dev_8802&subsys_86231462&rev_05#4&23c0b1c&0&52f0#{fd0a5af4-b41d-11d2-9c95-00c04f7971e0}\global
Finished Finding Demod and Capture filters
Finished Checking for new BDA DVB-T Cards
Found BDA device: Xpert BDA DVB-T Tuner/Demod
Failed to connect Capture filter to BDA Demux
Failed to connect filters in graph.
Failed to connect Capture filter to BDA Demux
Failed to connect filters in graph.
Failed to connect Capture filter to BDA Demux
Failed to connect filters in graph.
Failed to connect Capture filter to BDA Demux
Failed to connect filters in graph.

Similar Messages

Unable to install Adobe Digital Editions and Windows 8

help - I keep trying to install Adobe Digital Editions on Windows 8 - icon appears; program is in "programs" but ADE isn't there - I've installed, uninstalled several times - and still not up and running - need help- is ADE not compatible with Windows 8?

Moved to ADE forum.

Audigy 2 ZS Pro digital output and Windows XP Pro

Recently "upgraded" my system to Windows XP Pro X64. My soundcard, an Audigy 2 ZS Pro, connects to my logitech 5. digital speakers via the front coaxial connector, no longer seems to output digital signal. The speakers indicate that there is no signal from the coaxial connection. I can hear sound from headphone through the analog output though.
Before the upgrade, I had everything working, but I don't remember all the details I went through to get it to work.
I have installed latest driver for Windows XP X64 from Creative, and I have modified the setting to bypass onboard decoding. Is there anything else I need to do? Online documentation talks about applications that I don't seem to have. Is there a X64-compatible application I need to run to get this to work? Thanks.
George

Okay Robert, I downloaded and installed your 6.25 drivers and they work fine. However, the Audigy 4 pro software, http://files.filefront.com/Pax+Audig.../fileinfo.html, does not install anything but drivers, no software applications. I looked on your board and could not find any definati've method for resolving this problem.
Perhaps you or someone else who is familiar with installing the software apps would care to provide a detailed solution.

Is there a solution for Digital Persona and Windows 10 and Edge or Google

I upgarded to windows 10 and now my digital persona does not work. Is there a solution for Microsoft Edge? If not is there a solution for google? I can make google my defult browser but it does not work there either?

We upgraded one laptop at home and I wasn't very surprised to find out that the backup / imaging program we were using on Windows 7 (Backup Exec System Recovery) stopped working. It's a nice program that I've been using for years - creates a base image then incrementals on a schedule. Allows for simple full bare metal recovery or for file recovery by mounting an image inside the program.
Have any of you tested anything similar in Windows 10?
This topic first appeared in the Spiceworks Community

Validity Sensor finger print reader and windows 7

I just recently installed windows 7 enterprise 64bit on my dv4t-1300cto. Everything is brilliant except for the fingerprint reader which does not work. It shows up in device manager as being installed correctly, but digital persona and windows say its not connected. I've tried a few reinstalls of software and drivers but to no avail. And when I look for software, the results are pretty sparse. HP tries to convince me that im using a beta software and support will show up soon, but this is not a beta copy of anything. Has anyone done what ive done and sorted it out?
the reader model is Vfs201.
Thanks all.
This question was solved.
View Solution.

Hi,
New version of driver for Win7 released by HP:
Validity Fingerprint Sensor here
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Remot Control For Digital@nywhere ATSC and Vista Don't Work Together Very Well

I have a Digital@nywhere ATSC tuner card w/remote.
On Windows XP, the remote worked ok. On Windows Vista, the remote works only some of the time.
On Windos XP, the BDA drivers and utilities on the install disk loaded fine. Not so with Vista.
On Vista, the utilities on the install disk seem to load fine, but the BDA drivers fail.
Loading the Vista Digital@nywhere utilities gets the tuner card to work, but has no drivers for the remote. Leaving me to load the utilities from the install disk, and and the BDA drivers from the Vista Digital@nywhere files. A rather tedious process, with the remote only functioning sometimes.
I have tried every trick I can think of to get the remote control and Vista to work together, to no avail. I'm stumped.
I'd rather not go out and buy a new tuner card, when the Digital@nywhere ATSC tuner card works fine on Vista. I'd just like to have a remote control that works fine too. But I don't.
I hope an answer can be found for this problem.
If I haven't been clear enough, just ask, and I'll try to explain things better.
Thanks for any help that anyone can give.

Are you using Media Center in Vista? If so, buy a Media Center remote, should work with no problems.

HT1452 I want to reset the permissions on a western digital external hard drive to work between mac and windows... How can I do this easily?

I have a MacBook Pro and have recently bought a Western Digital external hard drive. I used it on my windows laptop first and unfortunately now on the Mac it is read only. How can I set it so that I can use it successfully between the both the Mac and windows laptop?
Thanks

MacQuack wrote:
You will need to pull all the information off first. The formatting will erase it all.
Use Disk Utility (in Applications >> Utilities or use Spotlight to find it). On the left select your WD drive and then select the Erase tab. Where it says Format, select exFat in the drop-down menu. Next, click Erase and done. It will take approx. 5-15mins to re-format.
Cons: You will be unable to store files 4GB or larger in this format (usually only dmg/iso files or large Outlook files). Also, you will be unable to use Time Machine or other auto-backup programs.
That is not entirely correct, there is no 4G limit using exFat, FAT32 is the one with the limit.

Direct Digital Filing with HP OfficejetPro 8600 Plus and Windows 7

Set up Scan to Network Folder using Direct Digital Filing with HP OfficejetPro 8600 Plus and Windows 7
Can't figure out where the network file folder should be.

went to hp/support, was sent to a sign im page, entered cm750 product number; the site searched my installation to detect the 8600, here are the results:
We were unable to verify your product
Drivers & Updates
Warranty Status
Additional Support
        This tool recommends the latest print driver software to keep your HP product up-to-date.
No Action Needed:HP recommended software installed and up-to-date.
If your product is not printing or scanning correctly, you may want to try the HP Printer Install Wizard to identify software issues. Click the link below to begin:
                   HP Printer Install Wizard for Windows »              No Action Needed:Windows in-Operating System (in-OS) print driver is installed and is currently the only driver available for this product.
For more information on getting the best functionlity from your product with this print driver, click the link below:
                 In-OS Print Driver »
Action Needed:                    Your print driver software is missing or a better version is available. HP recommends installing the following software. Click the link below to begin:
Product Not Supported: This product is not currently supported by this tool. Error: This tool experienced an error while trying to identify the print driver software for your product.
To view additional software for this product, click the link below:
To view all of the software available for this HP product or the HP Printer Install Wizard for Windows, click below:
            Software & Driver Downloads »
HP Printer Install Wizard for Windows »
Please wait while we scan your product for solutions and updates.Your Product:
0%
This should take 1-2 minutes, depending on your computer and connection speed.
HP was unable to verify that you have this product, but did find other products.
                        HP Officejet Pro K8600 Printer »                        Software & driver downloads »                        Support & troubleshooting » Learn how to help HP find your product
                         1 HP products were discovered
Select an option for a product below. Some products may be scanned to identify recommended drivers, updates, and solutions.
»HP Pavilion a6120n Desktop PC                 Serial Number:                                 MXF73106L0                                                Product Number:                                 GC670AA
» Software & Driver Downloads »
Support & Troubleshooting   Well, it did find my desktop. I hve re-installed the 8600 from scratch, downloaded drivers and patches etc. can anyone suggest how to get scanning to work?

IPod Touch Recognized as a Digital Camera in Windows 7 (x64) - SOLUTION!

Hi guys
After several days I finally found the solution to this with some help from Apple 2nd level support.
Symptom: iPod Touch is not connecting to iTunes. Under My Computer you find the iPod as a Portable Device > Digital Camera
Cause: Windows 7 wasn't able to install the right Driver for your Touch.
Solution:
1. Uninstall all the Apple software via Control Panel:
- iTunes
- Quicktime
- Apple Software Update
- Apple Mobile Device Support
- Bonjour
- Apple Application Support
2. Delete all the directories related to Apple (Including Apple,iPod, iTunes, Quicktime and Apple Computer -if they are there-) under:
- C:\Program File\Apple
- c:\Program Files (x86)
- C:\users\<USER>\AppData\Local
- C:\users\<USER>\AppData\Roaming
3. Restart
4. Reinstall iTunes (Right click and run as Administrator) but THIS IS THE TRICK!! change the installation path to C:\program files\iTunes (Remove x86) !
5. Connect ipod
It will still be a Camera..don't worry..
6. Go to My Computer > right click > Manage > Device Managers > Find your ipod under the Portable Devices
7. Right Click > Update driver > Specific location and browse C:\Program Files\Common Files\Apple\Mobile Device support\Drivers
8. After succesfully installed this driver you will be able to see your iPod Touch in iTunes
Enjoy !
J

take a look @ these threads: one and [two|http://discussions.apple.com/thread.jspa?messageID=11045615#11045615].
JGG

How to check if a user has clicked on a digital control and changed its value?

Greetings !!!
I am looking for a simple way (without using Windows messages)of knowing if an user has clicked on a digital control and changed its value.
I have tried the key focus property; but I have to click twice to make it work.
If somebody knows a better solution; please let me know.
Thank you in advance for your help

If you just want to know if the value has changed you can put it in a while loop and use shift registers to see if the value has changed.
Brian
Attachments:
Changed.vi ‏22 KB

How to input/output a digital signal and acquire an analog signal at the same time?

Dasylab, version: 8.0.04
Acquirement Card: PCI1002L
When I use DasyLab to acquire the analog signals is no problem without digital inputs and outputs,
and when I use DasyLab to input or output a digital signal is no problem also, but when I do that at the
same time, DasyLab tell me the rate is too high and stop.
so, I searched the manual book1 (user guide) for that, it showed me :
To internally equalize measurement time and system time in the analog input, digital input and counter
hardware modules, use the following settings:
   Synchronization: PC Clock
   Sampling rate: <= 5Hz
   Block size: =1
the problem is, if I set the Sampling rate to 5Hz, the speed of the acquirement datas is not enough for my
application.
so, how to improve it? who can give me a example programm for me. thanks!
by the way, I come from China, my English isn't good, I'm sorry.
Allen, China.

Hi,
Have things changed over the years?
I need to syncronise a digital output (Modul NI9474) and an analoge input (AI-Modul NI9203) module. I need to measure time intervals from a flank in signal A to a flank in signal B. I would like accuracies of the order of 1 ms. Currently, the signals are not synchronised, with errors of the order of 2 times the block length (block size x sample rate), sometimes much higher. The best I got so far was a block size of around 20 with a sample rate of 1 kHz.
If I use the master and slave settings on the RTSL settings, my program doesn't run properly.
If I use digital signals for input and output, I can syncronise them with RTSL settings and everything is good, but I can't always do that.
Also, if I do anything in the GUI (such as scrollowing something or going to another window), my output gets screwed up properly.
1. What can be done to synchronise AI with DO?
2. Is there something that can be done to avoid messing up the output when something happens in the user interface? (I know that I am messing up the outputs as they make some valves switch and that is loud).
Thanks in advance!

How do I create a RAID 0 on a P43-C51 mainboard and Windows 7

I just upgraded my computer with a new MSI P43-C51 mainboard, Intel E8400 Dual Core and Windows 7. I have two identical Western Digital 250GB SATA drives. In my previous system, using Windows XP, I had the two drives configured in RAID 0. I was unable to find the RAID drivers (and still haven't found them) for the RAID configuration so I erased the hard drives and started over new. I have the system up and running and want to re-install Windows 7 but in RAID 0 format. How do I do this?
I have downloaded the RAID drivers: Intel_HECI_MB.zip from the MSI download site but I haven't been able to use the software to create a RAID 0 configuration.
With my last board and XP, it was straight forward. The old BIOS itself allowed the creation of a RAID 0 configuration and the board CD included the drivers for XP. I am wondering if I overlooked something basic and my new board just doesn't support RAID.
Any advice or help would be appreciated and thank you in advance!

Thanks, that is what I suspected. Now I have a good excuse to upgrade the hard drives to SATA II !

Valid digital signatures in Windows XP are no longer valid in Windows 7

We have a Windows application that uses axAcroPDF control to display digitally signed and validated forms. The PDF document was displayed correctly (Signed and all signatures are valid ) in Windows XP environment. However, recently our organization switched to Windows 7 machines. The digitally signed PDF documents no longer has valid signatures message. Instead the message "The certification/signature is still being validated" is displayed and it does not get validated. There is an exception "AcroRd32.exe:Access violation reading location 0x00000042"
Could someone help me to resolve this issue?
Thanks!

It is an ActiveX control provided by Adobe Acrobat (AxAcroPDFLib.AxAcroPDF) to host a PDF in a windows form application. We are using version 10.1.2.
Thanks!

Iphone and Windows XP Pro

Hi and new to the forum. After upgrading to os 4.2 on Iphone 4, when I sync to the computer it "finds new hardware Iphone" and "finds new Digital Camera" and then the add wizard pops up and nothing is working from there and it doesn't install. There was a fix on the Apple site which hasn't worked for me to follow through the add and upgrade usb driver for apple.

You dont have a webcam on the computer... Well I'd still check Add/remove Programs for any Webcam software.
Alternatively it could be security software Norton/Kaspersky/NOD32/ ect...
Something you can try is using MSconfig on the computer
to use Msconfig on windows you would
Click Start>Run> in the box type Msconfig - click run or ok..
When the system configuration utility appears you choose selective Start up - Click the startup - click Disable all.
After disabling All items it will uncheck every item in the list. You will want to go through the list and Re-check anythign apple or iTunes/Quicktime related.
Once you have done that click the Services tab - Click Hide All microsoft services -then click disable all.
After you have done that same thing here look for anything Apple, Quicktime, Bonjour, iTunes, iPod related and recheck them - once you have done so click ok - the computer will prompt for a reboot - Restart the computer and test.

Sound not working Notebook Envy 15 TS windows 8 and windows 8.1 - problem continues

Hello,
My computer sound stopped again.
I posted previously:
http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/Sound-not-working-Notebook-Envy-15-TS-windo...
After I`ve followed David`s steps my computer`s sound started working again. But it didn`t last. The sound stopped working just one day after.
I did the procedure again, and it worked. But just for a few hours.
The second time I reinstalled the IDT codec I noticed at the device manager that there is no conflict at the IDT High Definition Audio CODEC.
Instead, the conflict appear in another item of the sound, video and game controllers topic: high definition audio device.
Is there another codec I should reinstall?
Could anyone help me?
Regards,
Luiz

As nobody asked me yet, I`m going to provide some additional information, hoping this can help getting me some help!
The properties device shows the following log:
This device cannot start. (Code 10)
{Operation Failed}
The requested operation was unsuccessful.
Driver provider: Microsoft
Driver date: 22/08/2013
Druver versuib: 6.3.9600.16384
Digital Signer: Microsoft Windows
The Driver File Details shows the following driver files:
C:\WINDOWS\system32\drivers\drmk.sys
C:\WINDOWS\system32\drivers\HdAudio.sys
C:\WINDOWS\system32\drivers\ksthunk.sys
C:\WINDOWS\system32\drivers\portcls.sys
C:\WINDOWS\system32\SysFxUl.dll
C:\WINDOWS\system32\WMALFXGFXDSP.dll
Beyond this files above listed, the driver details sogs these informations:
Provider: Microsoft Corporation
File Version: 6.3.9600.16384 (winblue_rtm.130821-1623)
Copyright: (c) Microsoft Corporation
Digital Signer: Microsoft Windows
More information:
If I ask to Ubdate Driver, with automatic serch engine, I get a message saying the best driver software for me is already installed and that mine driver software for the "High Definition Audio Device" is up to date.
Can anyone help me now?
Thanks,
Luiz

Digital@nywhere and Windows 7

Similar Messages

Maybe you are looking for