Digital@nywhere - ATSC : Channel does not stick while recording

Hi,
My TV input is cable (analog).
While recording a channel, the channel switches automatically after 5mn or so. I have to stop recording, reselect the channel, are restart recording. Yet again the channel switches after a similar delay.
Did anyone experience such issue? Any advice is greatly appreciated.
OS: XP Pro SP2
Intel Core Duo 2.4
2GB RAM
nVidia 7600 GT
Much thanks!
Benoit

Am I correct in assuming you are trying to use this card with cable TV input and not over the air? If so how do you have the cable connected? From reading the manual it looks as if this card is for over the air input not cable tho I could be wrong.
Are you able to watch TV (not recording) with it staying on channel?

Similar Messages

Remot Control For Digital@nywhere ATSC and Vista Don't Work Together Very Well

I have a Digital@nywhere ATSC tuner card w/remote.
On Windows XP, the remote worked ok. On Windows Vista, the remote works only some of the time.
On Windos XP, the BDA drivers and utilities on the install disk loaded fine. Not so with Vista.
On Vista, the utilities on the install disk seem to load fine, but the BDA drivers fail.
Loading the Vista Digital@nywhere utilities gets the tuner card to work, but has no drivers for the remote. Leaving me to load the utilities from the install disk, and and the BDA drivers from the Vista Digital@nywhere files. A rather tedious process, with the remote only functioning sometimes.
I have tried every trick I can think of to get the remote control and Vista to work together, to no avail. I'm stumped.
I'd rather not go out and buy a new tuner card, when the Digital@nywhere ATSC tuner card works fine on Vista. I'd just like to have a remote control that works fine too. But I don't.
I hope an answer can be found for this problem.
If I haven't been clear enough, just ask, and I'll try to explain things better.
Thanks for any help that anyone can give.

Are you using Media Center in Vista? If so, buy a Media Center remote, should work with no problems.

Latest OSX Mavericks on an iMac..... Gmail, View, Sort By, Date does not stick...

Sort by date does not stick...
Is there a solution?

I've tried re-installing my iTunes software and searched throughout the forums and elsewhere without so far being able to determine how to resolve this difficulty.
In case my original question formulation was not clear, in the past I could click on the header (while viewing my iTunes library in 'Songs' view) and cycle through "Album", "Album by Artist", in either ascending or descending order, and so forth.
Now I'm only able to chose between "Album by Artist", either ascending or descending. There is no "Album" view option available to me, as there has always been in the past.
I'm completely puzzled as to how this happened. Perhaps I inadvertently hit the wrong key combination while using iTunes and it changed something, I just don't know.
I would really appreciate it if any other forum members have suggestions as to how I might fix this!

Digital@nywhere-ATSC installation

Digital@nywhere-ATSC BDA drivers won't install after trying to run the setup program. I have Window XP /SP2 with current updates (1/15/07). Is there a updated driver for the board (not 2005). Thanks

http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=614&kind=10

Getting error 'Item 00000 does not exist' while creating a salse order

Hi All,
We are facing an issue, we get an error message saying 'Item 00000 does not exist' while creating a sales order for a particular order type, we do not get this problem with all the materials, only a few of them and the materials which give a problem are part of the supersession chain. The problem is not even coming for all the superseded materials.
This problem is occuring with none of the other order types but just one. We have compared the configuration for the order types for which this error is not coming and the order type which is giving the problem, and its exactly the same.
When creating the sales order through VA01 even though the error message comes, but on hitting the enter button the processing goes further. But when creating the sales order through the background program the processing stops the moment the error message comes and the Sales Order does not get created.
Your valuable suggestions for helping us resolving this issue will be highly appreciated.
Regards,
Geeta

HI Geeta
As per your post "Problem is when you are executing VA01 in background sales orders are not generating due to error message".
Apart from configuration check alternative is "Take ABAPer's help and change this error message type to warning/information message type in the system". With warning/information message type you could be able to create sales orders in background also.
try and revert

Path does not exit - While trying to save file on SharPoint Server 2013 from client machine

Hi,
I have installed Microsoft SharePoint Server 2013 Enterprise Edition on my testing Lab environment (On VM Workstation 10) on Windows Server 2012 with SQL server 2012, I can access all files stored at SharePoint Server from any physical machine, I can share
a single file among different people to work simultaneously, but here i stuck on saving any file from client machine to directly on SharePoint Server, Attached is the snap shot, whenever I try to save any file directly It says Path Does Not Exist, If I drag
and drop any file directly to SharePoint I do not see any error message.
I read from different posts that I need to Enable Desktop Experience Feature on Server 2012, which I installed but no positive result gained :(
I will appreciate for any possible help?
Ali

Hi Ali,
Please try disabling the protected view per the link below and test the issue again:
http://social.technet.microsoft.com/Forums/en-US/b8381a19-3394-406f-8adb-1976f45460ef/path-does-not-exit-while-trying-to-save-file-on-sharpoint-server-2013-from-client-machine?forum=sharepointgeneral
You could simply type the url as http://sp/sites/sitename in the Filename place.
Regards,
Rebecca Tu
TechNet Community Support

Mouse pointer does not stick on fader when moving it

Using Logic Pro 9. If I grab any fader, the mouse pointer turns into a small dot. If I then drag the fader up or down, the dot does not stick on the fader. Instead, I find I have to drag the dot well above or below the fader to make big adjustments. Is there any setting to control this? Or is this just how it is in Logic. In all other audio applications I've seen, the mouse pointer sticks on the fader when moving it up or down.

No - haven't found a fix for this yet. I can only guess that maybe it wasn't as noticeable when display screens weren't so big. I'm running on a 27" iMac so the effect is quite pronounced. I supposed it could be argued that it gives you a finer grain of control to make small changes - but it really takes away from the 'feel' like you are moving a real fader.

HT4623 person contact image does not appear while on a call,why?

person contact image does not appear while on a call,why?

when you say "Re-upload the image", do you mean reinsert it, or re-link it?
Neither.
Re-upload it to the web server from your local hard drive. In DW, click on the image file in the Files panel then click the Up arrow to Put the image to the server.
If that does not work, do as Nancy suggests and re-create the image in your image editor then re-upload.

My Mac OS X does not restart while trying to update/install

My Mac OS X does not restart while trying to update/install iTunes. It allows me to click on Restart button, then just the screen saver shows up, waited 10 -15mins and nothing happens. Had to force shut to try again, same thing happens.

As a test, try opening the PDFs using Preview and see if they will print correctly from that application. If so, then it is likely an Acrobat problem. If they still don't print correctly, it is like a file problem.
You can also try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account

I have just put a link to my web site but it does not appear while using Firefox but it does if using Internet explorer or Chrome why would this be?

I am using Window 7 I have just put a link to my web site but it does not appear while using Firefox but it does if using Internet explorer or Chrome why would this be?
It does appear on a friend's computer using Firefox.
Barossa Vintage Festival ... this is the missing link on my computer just under the link named ... Autumn photo collection

No problems here with the tree links:
View photos
Friends gather for breakfast
Friends take an Autumn drive
Photos of the Barossa Festival
Reload the web page and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)

When I rearrange the order of my photos in an album, the order does not stick for exporting for a book.

I manally rearrange my photos in an album, the order does not stick when I export to a folder in order to make a book. Also, if I have given a title to a photo, it does not seem to export with the other pictures in an album.

It's a little vague on what you're workflow is. So I'll make a guess about the book: if you're dragging those photos into an iPhoto book they will be sorted by date. So you would have to use the Photos ➙ Batch Change ➙ Date (with 1 minute between photos) menu option on those photos in the album before dragging them onto the book icon.
Photos exported to a folder on the hard drive will be sorted by the Finder either alphanumerically or chronologically. To get them in the manual order that's in the album you'll need to rename them via the Photos ➙ Batch Change ➙ Title to Text with a sequential number added to each photo. Then export to the Desktop with the option to use the Title as the new File name.
OT

XI Communication Channels does not poll

Hi All,
XI Communication Channels does not poll
Does anyone know how to troubleshoot this?
Actually they should pick the stuff from the SQL server, convert it to Idoc and send it to production BOX.
Shavali

Hi,
Is it a problem with the JDBC adapter?
If yes, make sure that the channel is active and that it has been started.
ALso , make sure that the sender JDBC adapter Select Query has some valid data and actually returns some rows!
Regards
Bhavesh

Unable to sync my movies in the i tunes 11 library i try to add the mp4 video by using the add to library option but the movie does not sync while the music is syncing fine...

i am unable to sync my movies in the i tunes 11 library i try to add the mp4 video by using the add to library option but the movie does not sync while the music is syncing fine...

I had the same issue. What I did was save the movies on a thrid-party app like Download Manager Lite. Once downloaded, go back to itunes, go to your iDevice, go to apps and transfer the app, then scroll down and click on the app and from there you can send the movies to that app and WILL play. Can only hold up to 8 videos/movies (this is for iPod Touch 3G or better, iPhone 3s or better, iPad requires iOS 4.3 or better)
YES THIS APP SUPPORTS .mp4
From other ipod (nano, classic): I don't remember.
If your just putting them on iTunes, it should show and play on iTunes no problem.
Message was edited by: keeferaf

VB6 NI-USB-9237 DAQmxCreateAIVoltageChan selected physical channel does not support the measurement type required

I have a VB6 program with code that properly reads analog inputs from an NI-USB-6008.
I tried to re-use the code for a strain-gage module NI-USB-9237, but at the DAQmxCreateAIVoltageChan step I get the following error:
"Measurements: Selected physical channel does not support the measurement type required by the virtual channel you are creating.
Create a channel of a measurement type that is supported by the physical channel, or select a physical channel that supports the measurement type."
Should I be calling a function other than DAQmxCreateAIVoltageChan?
If so, what is it, or where can I find the reference for such functions?
Or - if that is the right function, should I pass different arguments? Currently I'm calling:
DAQmxErrChk DAQmxCreateAIVoltageChan(taskHandle, "Dev1/ai1", "", DAQmx_Val_Cfg_Default, -10, 10, DAQmx_Val_VoltageUnits1_Volts, "")
Thanks in advance for your help
-Chris Hardy
Solved!
Go to Solution.

I figured it out from 372251a.PDF
First, the correct function is DAQmxCreateAIVoltageChanWithExcit
Second, you can't just ask for one sample on one channel - ask for 2 samples instead.
-Chris Hardy

Boris Title - Changes does not stick

I'm making some changes on my Boris 3D text but the changes does not stick.
I do a bevel on the text and press Apply, but when I see the result nothing happened. I go back in and it looks like I changed nothing. I click the check box but it does not help...

Changes do not stick.
Yrs. for proper English,
Uncle Grump
Thanks for correcting my English Uncle Grump
I think the reason for my problem was that the text was not selected when I did the changes.

Digital@nywhere - ATSC : Channel does not stick while recording

Similar Messages

Maybe you are looking for