Digital output went out after I upgraded...

My Apple TV was working correctly. Until the software update...
Did the software update, and now I don't get a signal from the digital out connector. Already:
- checked Settings -> Audio/Video -> Dolby Digital Out. It was on.
- used the same cable with another component, and it was working correctly...
- tried another input on the preamp
Any pointers?

DOUBLE UPDATE: Disconnected the ATV, waited a few minutes. Et Voilá!!
I thought that was the typical repair procedure only for PCs.. Apparently, it also does wonders to ATV...

Similar Messages

  • Preview issue. Send to iPhoto option is grayed out after Lion upgrade

    Preview issue. Send to iPhoto option is greyed out after Lion upgrade.
    In Snow Leopard it was an option to send pics from Preview to iPhoto, but now it is greyed out if I right-click on the pic. I have searced and tried everything, but I cannot fix it, so does anyone have a fix for it? Please :-)

    I can offer no help but would also like to see this issue resolved.  Firstly, it would be useful to know if this problem is seen by everyone.  When viewing photos in Preview, with thumbnails in the sidebar, right-clicking on any of the thumbnails results in this:
    Prior to the upgrade to Lion, "Send to iPhoto" was not greyed out and worked as expected.

  • Fonts went strange after system upgrade

    After 'pacman -Syu' i rebooted and my fonts started looking strange, kinda bigger.
    In some places its not even noticeable but again in other places it is x(.
    I'm using Flubox as a WM and i really don't think this has anything to do with the WM.
    I was wondering if anyone else experienced some similar problems after this upgrade?
    Upgrade log:
    [2009-11-01 14:09] synchronizing package lists
    [2009-11-01 14:09] starting full system upgrade
    [2009-11-01 14:18] removed gnome-mount (0.8-1)
    [2009-11-01 14:18] upgraded kernel-headers (2.6.30.5-1 -> 2.6.31.4-2)
    [2009-11-01 14:18] Generating locales...
    [2009-11-01 14:18] en_US.UTF-8... done
    [2009-11-01 14:18] en_US.ISO-8859-1... done
    [2009-11-01 14:18] Generation complete.
    [2009-11-01 14:18] upgraded glibc (2.10.1-4 -> 2.10.1-5)
    [2009-11-01 14:18] upgraded attr (2.4.43-1 -> 2.4.44-1)
    [2009-11-01 14:18] upgraded acl (2.2.47-2 -> 2.2.48-1)
    [2009-11-01 14:18] upgraded libdrm (2.4.13-1 -> 2.4.15-1)
    [2009-11-01 14:18] upgraded libx11 (1.2.2-1 -> 1.3.2-1)
    [2009-11-01 14:18] upgraded xextproto (7.0.5-1 -> 7.1.1-1)
    [2009-11-01 14:18] upgraded libxext (1.0.5-2 -> 1.1.1-1)
    [2009-11-01 14:18] upgraded libxxf86vm (1.0.99.1-1 -> 1.1.0-1)
    [2009-11-01 14:18] upgraded fixesproto (4.0-3 -> 4.1.1-1)
    [2009-11-01 14:18] upgraded libxfixes (4.0.3-2 -> 4.0.4-1)
    [2009-11-01 14:18] upgraded libxdamage (1.1.1-2 -> 1.1.2-1)
    [2009-11-01 14:18] upgraded libgl (7.5.1-2 -> 7.6-2)
    [2009-11-01 14:18] upgraded ati-dri (7.5.1-2 -> 7.6-2)
    [2009-11-01 14:18] upgraded binutils (2.19.1-5 -> 2.20-1)
    [2009-11-01 14:18] upgraded dbus-glib (0.82-1 -> 0.82-2)
    [2009-11-01 14:18] upgraded enca (1.11-1 -> 1.12-1)
    [2009-11-01 14:18] upgraded gcc-libs (4.4.1-1 -> 4.4.2-2)
    [2009-11-01 14:18] upgraded libxt (1.0.6-1 -> 1.0.7-1)
    [2009-11-01 14:18] upgraded xulrunner (1.9.1.3-2 -> 1.9.1.4-1)
    [2009-11-01 14:19] upgraded firefox (3.5.3-1 -> 3.5.4-1)
    [2009-11-01 14:19] upgraded gcc (4.4.1-1 -> 4.4.2-2)
    [2009-11-01 14:19] upgraded gnome-disk-utility (2.28.0-1 -> 2.28.0-2)
    [2009-11-01 14:19] upgraded gnutls (2.8.3-1 -> 2.8.4-1)
    [2009-11-01 14:19] upgraded gstreamer0.10 (0.10.24-1 -> 0.10.25-1)
    [2009-11-01 14:19] upgraded libxv (1.0.4-1 -> 1.0.5-1)
    [2009-11-01 14:19] upgraded gstreamer0.10-base (0.10.24-1 -> 0.10.25-1)
    [2009-11-01 14:19] upgraded libtheora (1.0-1 -> 1.1.1-1)
    [2009-11-01 14:19] upgraded gstreamer0.10-base-plugins (0.10.24-1 -> 0.10.25-1)
    [2009-11-01 14:19] upgraded gstreamer0.10-ffmpeg (0.10.8-1 -> 0.10.9-1)
    [2009-11-01 14:19] upgraded gstreamer0.10-python (0.10.16-1 -> 0.10.17-1)
    [2009-11-01 14:19] upgraded inputproto (1.5.1-2 -> 2.0-1)
    [2009-11-01 14:19] upgraded libmpcdec (1.2.6-1 -> 1.2.6-2)
    [2009-11-01 14:19] upgraded k3b (1.66.0alpha2-3 -> 1.68.0alpha3-1)
    [2009-11-01 14:19] upgraded libatasmart (0.16-1 -> 0.17-1)
    [2009-11-01 14:19] upgraded libdmx (1.0.99.1-1 -> 1.1.0-1)
    [2009-11-01 14:19] upgraded libgksu (2.0.8-1 -> 2.0.12-1)
    [2009-11-01 14:19] upgraded libgphoto2 (2.4.6-3 -> 2.4.7-1)
    [2009-11-01 14:19] upgraded libgsf (1.14.15-1 -> 1.14.16-1)
    [2009-11-01 14:19] upgraded libsexy (0.1.11-1 -> 0.1.11-2)
    [2009-11-01 14:19] upgraded libusb1 (1.0.1-1 -> 1.0.3-1)
    [2009-11-01 14:19] upgraded libxmu (1.0.4-2 -> 1.0.5-1)
    [2009-11-01 14:19] upgraded libxpm (3.5.7-2 -> 3.5.8-1)
    [2009-11-01 14:19] upgraded libxaw (1.0.6-1 -> 1.0.7-1)
    [2009-11-01 14:19] upgraded libxcomposite (0.4.0-2 -> 0.4.1-1)
    [2009-11-01 14:19] upgraded libxdmcp (1.0.2-2 -> 1.0.3-1)
    [2009-11-01 14:19] upgraded libxfont (1.4.0-1 -> 1.4.1-1)
    [2009-11-01 14:19] upgraded libxfontcache (1.0.4-2 -> 1.0.5-1)
    [2009-11-01 14:19] upgraded renderproto (0.9.3-2 -> 0.11-1)
    [2009-11-01 14:19] upgraded libxrender (0.9.4-2 -> 0.9.5-1)
    [2009-11-01 14:19] upgraded libxft (2.1.13-1 -> 2.1.14-1)
    [2009-11-01 14:19] upgraded libxi (1.2.1-1 -> 1.3-1)
    [2009-11-01 14:19] upgraded libxinerama (1.0.99.1-1 -> 1.1-1)
    [2009-11-01 14:19] upgraded libxkbfile (1.0.5-1 -> 1.0.6-1)
    [2009-11-01 14:19] upgraded libxres (1.0.3-2 -> 1.0.4-1)
    [2009-11-01 14:19] upgraded libxtst (1.0.3-2 -> 1.1.0-1)
    [2009-11-01 14:19] upgraded libxvmc (1.0.4-2 -> 1.0.5-1)
    [2009-11-01 14:19] upgraded libxxf86dga (1.1.1-0.1 -> 1.1.1-1)
    [2009-11-01 14:19] upgraded libxxf86misc (1.0.1-2 -> 1.0.2-1)
    [2009-11-01 14:19] upgraded live-media (2009.09.28-1 -> 2009.09.28-2)
    [2009-11-01 14:19] upgraded mesa (7.5.1-2 -> 7.6-2)
    [2009-11-01 14:19] upgraded nautilus (2.28.0-1 -> 2.28.1-1)
    [2009-11-01 14:19] upgraded nautilus-cd-burner (2.24.0-2 -> 2.25.3-1)
    [2009-11-01 14:19] upgraded ntfs-3g (2009.4.4-1 -> 2009.4.4-2)
    [2009-11-01 14:19] upgraded openssh (5.3p1-1 -> 5.3p1-2)
    [2009-11-01 14:19] upgraded putty (0.60-1 -> 0.60-2)
    [2009-11-01 14:19] upgraded python-gdata (1.3.1-1 -> 2.0.4-1)
    [2009-11-01 14:19] upgraded shared-mime-info (0.70-1 -> 0.70-2)
    [2009-11-01 14:19] upgraded totem (2.28.1-1 -> 2.28.2-1)
    [2009-11-01 14:19] upgraded xorg-font-utils (7.4-3 -> 7.5-2)
    [2009-11-01 14:20] Updating font cache... done.
    [2009-11-01 14:20] installed ttf-freefont (20090104-2)
    [2009-11-01 14:20] upgraded vlc (1.0.2-3 -> 1.0.3-1)
    [2009-11-01 14:20] upgraded vte (0.22.2-1 -> 0.22.3-1)
    [2009-11-01 14:20] upgraded xf86-input-evdev (2.2.5-1 -> 2.3.0-1)
    [2009-11-01 14:20] upgraded xf86-video-ati (6.12.4-1 -> 6.12.99.git20091014-1)
    [2009-11-01 14:20] upgraded xf86-video-vesa (2.2.0-1 -> 2.2.1-1)
    [2009-11-01 14:20] upgraded xorg-apps (7.5-1.1 -> 7.5-2)
    [2009-11-01 14:20] upgraded xorg-fonts-alias (1.0.1-2 -> 1.0.2-1)
    [2009-11-01 14:20] Regenerating font encodings... done.
    [2009-11-01 14:20] upgraded xorg-fonts-encodings (1.0.2-3 -> 1.0.3-1)
    [2009-11-01 14:20] installed printproto (1.0.4-1)
    [2009-11-01 14:20] installed libxp (1.0.0-3)
    [2009-11-01 14:20] upgraded xorg-server-utils (7.4-7 -> 7.5-2)
    [2009-11-01 14:20] upgraded xorg-server (1.6.3.901-1 -> 1.7.1-1)
    [2009-11-01 14:20] upgraded xorg-utils (7.4-4 -> 7.5-1)
    [2009-11-01 14:20] upgraded xorg-xauth (1.0.3-1 -> 1.0.4-1)
    [2009-11-01 14:20] upgraded xorg-xkb-utils (7.4-2 -> 7.5-1)
    [2009-11-01 14:20] upgraded xterm (246-1 -> 250-1)
    I tried clearing the font cache but it didin't help.
    Any ideas?

    I'm having a similar issue. Only difference is that fonts looks smaller than before the upgrade.
    I don't think this has something to do with KMS, because that update was a week ago an no problem was detected. This small fonts issue is probably related to recent updates on xorg- stuff.
    Moreover, the strange thing here is that only GUIs fonts got smaller. Fonts on firefox (the webpage, not the user interface) looks exactly the same as before.
    What should we do?

  • Prints washed out after OS upgrade

    Prints from my Epson R1800 appear washed out after the most recent Leopard updates. I removed and reinstalled the drivers with no improvement. This is the same performance I had when Leopard was new. Any suggestions?

    Open System Preferences > Print & Fax and delete the printer again. Now, control-click in the empty printers list. A menu showing 'Reset printing system' will appear. Click this window. Now add the printer again and see if the quality has improved.

  • Core audio output drops out after upgrading boot HD

    All,
    I have a strange thing happening after I cloned and replaced my OS boot drive. I cloned my OS boot drive to another larger drive. When I boot to this new drive and open projects (located on another dedicated HD), playing certain instrument elements cause all of the audio to drop out. It makes a pop, then another pop where the audio would tail out. So if I had a piano EXS instrument doing this behavior and I play a note, I get a pop, then where the audio would finish accessing the file, I would get another pop. This affects the entire output of all audio in the project. I don't think this affects iTunes, but I will check again tonight.
    In some cases, I have narrowed this down to a custom IR file loaded in Space designer. When I bypass this plug with a custom IR loaded, all audio will work fine, until I un-bypass this plug. If I reload this IR file, everything works fine.
    This now is happening on some of the Logic drumkits and EXS instruments and reloading the questionable instrument does not fix this issue. It seems like a possible database/pathing issue, but not sure.
    Has anyone seen behavior like this? Any way to fix?
    Some things I have tried on this new OS clone:
    Repair permissions
    Remove the logic plist file and reboot
    Run all of the maintenance/clean up scripts in Onyx
    BTW: This occurred with 8.0.1 and also 8.0.2
    If I physically re-install my original OS boot drive, these projects work fine.
    I am using Core Audio and am using the embedded audio interface. I also have a PCIx UAD card installed.

    This thread got lost with the 8.0.2 discussions.
    Has anyone run into this kind of behavior or any possible steps to recover?
    Thanks!
    Tad

  • Iphoto still grayed out after iphoto upgrade after mavericks install, what should I do?

    After upgrading to mavericks Iphoto was Grayed out. The computer Notified me that I would have to upgrade iphoto from 9.2.1 to to latest version.
    went to the mac app store, the upgrade page showed the iphoto upgrade, it downloaded and installed the upgrade but iphoto is still grayed out in the dock and in the applications folder. The mac app store shows the iphoto upgrade as being installed. whot should I do?

    First, make sure the new copy of iPhoto was not installed as a separate icon in your Applications folder.
    If that's not the case, try launching it anyway; I've seen instances where the icon fails to update until the associated application is launched for the first time.

  • Validity sensor/digital persona not working after win7 upgrade on dv3 2050ea

    Hi,
    I have recently clean installed windows 7 after Vista onto a dv3 2050ea laptop. I used the HP downloads page to get all the new drivers for win7 including the validity sensor and digital persona package. Win 7 does not find a biometric sensor and I can't see where to launch digital persona from . What can I do ?
    thanks
    Alan

    I just fixed this problem with my HDX 18,,,,,,I will walk you through the process that fixed my FP reader.
    I upgraded from VISTA to WIN7, that was where the problem occured.
    My PC DL'd the the updated Digital Persona Identity Protection Suite (DPIPS) program for WIN7 from the HP site.
    There is a known incompatibility with this update from HP and WIN7.
    The Validity Sensor Driver that detects the FP reader is the same for VISTA and WIN7 in my PC (check this first / update IF necessary).
    NEXT
    I went through the: START>Control Panel>Programs and Features>Digital Persona>Uninstall.
    Shut down and restart 2X.
    I went back to the HP site and DL'd the DPIPS program for VISTA.
    RUN > DPIPS program.
    UPDATE from the DPIPS Program (Version 4.11.3826) bypassing the the update from HP.
    Hope this works for you.
    > Was your question answered? Mark it as an Accepted Solution!
    > See a great post? Click on the white star and give it a Kudos!

  • Broadband drops out after bt upgrade work in area

    Hope someone can help because the call centre is helpful but unfortunetly the help they give me is what I have tried before.
    On Wednesday 17th August I received an ewmail from the BT Migration team stating that upgrade work would be taking place at my local exchange and that my phone and broadband would be out for 10 minutes on this day. The work got carried out and I received a email saying this and that my broadband would take about ten days to settle down.
    Now we are about 2 months since this wok and my once reliable broadband (have hardly ever had to restart the box in the past nearly 10 years) is dropping everyday and if I do restart the box I either get on to the internet then it drops out again or I don't, getting frustrated for paying for something I can't use.
    My HomeHub the original white model, only shows a solid broadband icon and flashing wireless and sometimes flashing data icon on the front of it but no internet.
    I have tried using the bt broadband desktop help but it says my line is okay and I have checked all the microfilters that are attached and everything seems fine there. Phone the number at the end of the desktop help wizard and get told to try the same thing it suggests.
    I have read on this forum that some other bt customers have had similar problems after upgrades and it turned out to be the homehub that was at fault.
    Can anyone give me any advice in sorting this please or can anyone confirm that it is the homehu bthe issue is with and if so how to get a free replacement from bt.
    Solved!
    Go to Solution.

    Hi Andy81,
    Welcome to the forums.  Yes you would be correct in the fact that the White Home Hub doesn't have the best reputation on ADSL2+ lines simply because of its age.  I would advise you to contact the mods, you can do that by following this link: http://bt.custhelp.com/app/contact_email/c/4951 and ask for a replacement hub, although you would have to pay if you are out of contract.  Do you know if you're out of contract?
    Regards Edd
    Check your Line
    BT Speedtester

  • Mic randomly cuts out after internet upgrade?

    Hello, i recently upgraded my net from adsl 2+ which was about 700 kilobits/second to cable which is 36 megabit/second. Before the upgrade my skype worked fine. After it got upgraded my mic cuts out randomly during 2 person calls and small group calls. It works in larger group calls fine but a few select people (about 3 i know of) cant host due this issue. Ive searched for about a month now for an answer.

    I should also point out that the issue is specific to Mac OSX. This computer has a Windows XP partition. I just tested the issue on the Windows partition, both with screen saver and standby, and it was able to sustain its internet connection with no issues whatsoever. To clarify, multiple computers with Mac OSX have not had this problem, and this computer, using a different operating system, has not had this problem. The issue is totally isolated to this one specific machine, using one specific operating system.

  • The face time button on my iphone 4 is no longer there. It was there in the beginning, I think it went missing after I upgraded the software. I am on the latest version 4.3.5 now. Is there any solution for this?

    I am not sure which upgrade version caused this to happen. I have upgraded the phone several times since last year and not really a frequent user of face time. I just noticed when I want to test it with my son's macbook.

    There isn't a separate app icon for Facetime for the iPhone like there is for the iPad and iPod Touch.  Facetime is built into the iPhone's iOS.
    Here a refresher on how it works: 
    iOS:  Using Facetime, http://support.apple.com/kb/ht4319

  • 3D Option Greyed out after windows upgrade?

    Pretty much as the title says. I had windows 7 and photoshop was just fine i could 3d from extrusion layer no problems, but then i upgraded my operating system but nothing else in my cpu so everything is the same. But now i cant click choose any 3d options whats wrong?

    Make sure Photoshop Preferences tab GPU is enabled and advance  mode is what you used. Please post your System infouse Photoshop menu Help>system info. Use its copy button and paste in here.

  • Airport Icon greyed out after Yosemite upgrade

    I just upgraded to Yosemite.
    I use my imac 27" as a wireless router in sharing.
    Since the upgrade, the airport icon is grey and my mac does not share its internet connection (hardwired via ethernet)
    Can anyone help with this?
    Thanks
    Andrew

    Yes sadly that was going to happen as Apple no longer supports iPhoto, instead there was a new app called Photos bundled with the upgrade to 10.10.3.
    It is the new colourful icon in your dock and Applications folder and launchpad. click on that and it should automatically migrate your iPhoto photos into the new app.
    You could try this first, although I'm not sure this will work as your version of iPhoto was a very old version, 9.4.3 was the most up to date for Lion
    and Yosemite was running version 9.6.1. Go to the App Store and click on the purchases tab and see if it is possible to upgrade
    your iPhoto app. if you can then great, you can use both Photos and iPhoto.

  • Linksys Router WRT54GS keeps timing out after Lion upgrade

    Since we upgraded to Lion we keep loosing wifi and Internet. Have to switch off the router. Then it works again for about a few minutes.
    Please help!
    Router is Linksys WRT54GS
    Lion is: 10.7.1
    Thanks in forward
    Bernhard

    Batteman87 wrote:
    I've had the exact same issue. Same router and everything. Worked like a charm with Snow Leapord but since the update it doesn't.
    Unfortunately the WRT54GS is from 2005 and there are not longer Firmware updates available for that model.
    http://homesupport.cisco.com/en-us/wireless/lbc/WRT54GS
    On Mac's there is problem with wireless access points using a 2.4GHz/5GHz mixed mode if both parts of the wireless network have the same name (SSID) but due to technical rules two different addresses (BSSID) for the different wireless modes.
    On that the Mac switches between the radio bands to provide allways "the best" connection.
    That causes disassociation from the wireless what shows you then the well known effects in your wireless.
    Also a band hopping "Guest Network" may disturb the connection if there is no dedicated name (SSID) is set for the Guest Network.
    On the WRT54GS
    Check that the "Guest Network" is disabled.
    Check that WPA2 Personal AES (not TKIP) is the security mode. See -> http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=22050
    Eventually change network mode from mixed (default) to "wireless-N Only" or "wireless-G Only" if the 2nd BSSID cause trouble with the Mac. -> http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=22555
    On the Mac
    Generally follow the instructions here -> http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=15805
    On System Setup - Airport (WiFi) main page uncheck (disable) "Ask to join new networks"
    Eventually set up a new location for your home network.
    Eventually delete all obsolete wireless networks from the "known networks" list including your WRT54GS
    Delete also the corresponding key's from Kechain Acceess
    Reboot the Mac
    Configure your home wireless on the Mac from scratch.
    Eventually try the Linksys Forum to find more information.
    http://homecommunity.cisco.com/t5/Wireless-Routers/bd-p/Wireless_Routers
    Regards - Lupunus

  • Report giving error after 10g upgrade

    We have a custom report which is erroring out after 10g upgrade. Following is the log file-->
    **Starts**24-APR-2009 04:11:21
    ORACLE error 3113 in FDPSTP
    Cause: FDPSTP failed due to ORA-03113: end-of-file on communication channel
    The SQL statement being executed at the time of the error was: SELECT R.Conc_Login_Id, R.Request_Id, R.Phase_Code, R.Status_Code, P
    APP-FND-01564: ORACLE error 1000 in AFPGRG
    Cause: AFPGRG failed due to ORA-01000: maximum open cursors exceeded.
    The SQL statement being executed at the time of the error was: &SQLSTMT and was executed from the file &ERRFILE.
    Start of log messages from FND_FILE
    End of log messages from FND_FILE
    ORACLE error 3114 in AFPRSR-Resubmit_Time
    Cause: AFPRSR-Resubmit_Time failed due to ORA-03114: not connected to ORACLE
    The SQL statement being executed at the time of the error was: SELECT R.Conc_Login_Id, R.Request_Id, R.Phase_Code, R
    SELECT R.Conc_Login_Id, R.Request_Id, R.Phase_Code, R.Status_Code, P.A
    Routine AFPPRD has encountered a fatal error. ORA-03114: not connected to ORACLE
    Contact your system administrator or support representative.
    Shutting down Concurrent Manager : 24-APR-2009 04:11:51
    ORA-01041: internal error. hostdef extension doesn't exist
    ORACLE error 3114 in AFPRSR-Resubmit_Time
    Cause: AFPRSR-Resubmit_Time failed due to ORA-03114: not connected to ORACLE
    The SQL statement being executed at the time of the error was: SELECT R.Conc_Login_Id, R.Request_Id, R.Phase_Code, R
    List of errors encountered:
    _ 1 _
    Routine AFPCMT encountered an ORACLE error. ORA-01041: internal error.
    hostdef extension doesn't exist
    Review your error messages for the cause of the error. (=<POINTER>)
    _ 2 _
    Routine AFPPRD has encountered a fatal error. ORA-03114: not connected
    to ORACLE
    Contact your system administrator or support representative.
    _ 3 _
    Routine AFPPRD has encountered a fatal error. ORA-03114: not connected
    to ORACLE
    Contact your system administrator or support representative.
    However the alert log has following-->
    Errors in file /u07/fatstdb/10g/admin/FATST_fatstdb/udump/fatst_ora_10468.trc:
    ORA-07445: exception encountered: core dump [qercoStart()+156] [SIGSEGV] [Address not mapped to object] [0x00000087D] [] []
    I already increased the cursors from 700 to 900
    How to fix it?

    Hi,
    However the alert log has following-->
    Errors in file /u07/fatstdb/10g/admin/FATST_fatstdb/udump/fatst_ora_10468.trc:
    ORA-07445: exception encountered: core dump [qercoStart()+156] [SIGSEGV] [Address not mapped to object] [0x00000087D] [] []Refer to the lookup to get more details about this error.
    Note: 153788.1 - Troubleshoot an ORA-600 or ORA-7445 Error Using the Error Lookup Tool
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=153788.1
    I already increased the cursors from 700 to 900
    How to fix it?Is it possible to increase OPEN_CURSORS to a higher value? Enable trace on this concurrent program, and see if this collects more details about the error.
    Regards,
    Hussein

  • No output to HDMI (but ok to VGA...) after CPU upgrade

    Hi there,
    I have a very strange problem... hope you can help!
    I wanted to upgrade my Mac Mini to use it as an HTPC, so I passed from 1.83Ghz CoreDuo/512Mb to 2.00Ghz Core2Duo/2Gb.
    The CPU and RAM upgrade process went OK, so I tried to connect the Mini to my HDTV (TOSHIBA 37A3030D) via a DVI->HDMI cable, but the screen was blank.
    I thought I had somehow damaged the digital video out of the Mini during the upgrade, so I tried to plug a 17" monitor with a VGA-VGA cable and a DVI-VGA adapter: no problem there.
    Then I thought about a cable issue, but the very same cable works perfectly when I try it with my MacBook Pro, and in the same TV.
    So I played a little with SwitchResX and finally resolved: after few tries and some reboots everything worked.
    But then I noticed that CPU temperature was a little too high, so I decided to re-open my Mini and put a better thermal compound.
    All went well, or so it seemed: in fact since this last intervention the CPU temperature went ok but I couldn't get HDMI output from my Mini any more!!
    Output to VGA still works, tried with the monitor I mentioned before and with my TV's VGA input ... too bad I can't reach 1080i via VGA!.
    I tried almost everything:
    - Playing around with SwitchResX, with no luck this time...
    - Resetting PRAM and NVRAM with various methods (the little button on the motherboard, CMD-OPT-P-RE during the boot, etc... )
    - Resetting SMC
    - Resetting firmware (keeping the power button pressed when turning on the machine 'till it beeps)
    - Reinstalling Leopard
    ...no results.
    The weird thing is that if I VNC to the mini I notice that the TV is correctly recognized (screenshot: http://www.matteo.ge.it/vnc_mini.jpg), and EDID data seems ok (link: http://www.matteo.ge.it/TOSHIBA-TV_macmini.txt)
    Do you guys have any idea?
    Thank you so much, I'm getting desperate

    I tried to connect the mini to the TV just after the upgrade. After some tweaking with SwitchResX it worked. The problems began when i decided to re-open the mini to put some better termal compound over the CPU.
    I agree with you, I have probably screwed up something during this operation, but I really can't say what!!! I tried both TechToolPro and the hardware tests from Tiger DVD, and all of the tests were ok...
    I phoned to the Apple tech support here in italy, but they proposed me to change the entire logic board, which would cost me almost the price of a brand new machine!!
    The ultimate test I want to do is to hook up my Mini to a DVI monitor with a DVI-D cable.
    If it doesn't work, It is almost certain that I have damaged digital video out (even if I would like to know how I could did that!!)

Maybe you are looking for

  • How to include more than one input ready rows in analyzer

    Hi Gurus,         I have a requirement that, I need to have more than one input ready rows at the end of the query output in analyzer.    Normally it will show only one row as input ready at end of the query result in any manual planning analyzer., B

  • Photos version 1.0: email sharing

    Photos version 1.0: after selecting some photos and going to the share icon on top right and selecting email, all the other photos in that event are being selected too. Why is that? Boaz iMac OS X Yosemitee Version 10.10.3 Photos version 1.0 (209.52.

  • MS word templates free text referenced gets cut

    Hello Experts, CRM 5.0 We have a scenario where we have implemented a custom BADI to add attributes in the list of fields that can be pulled into MS word templates from an order object in CRM. Some of the free text areas are also being referenced in

  • How to configure third party repository to Bea VCR adapter?

    Hi, I tried to configure the Bea VCR adapter as given in the document http://edocs.bea.com/wlp/docs92/pdf/day170adapter_developers_guide.pdf. But I haven't succeeded. I am implementing the JSR170 level1 API for a content server which having it's own

  • Does Flex SDK 4 Suport Khmer Unicode?

    Hi, I have problem with khmer unicode (http://www.khmeros.info/drupal612/en/download). Input Controls of Flex SDK 3 could be able to display Khmer Text correctly if the values are assign by hard code or copy and past to the controls. But when we set