Digital signature for the input data field

Hello friends,
I want to run a HASH routine (MD5) and then an encryption algorithm (RSA 64 bytes) over a string of characters ( for the some of the input fields NOT all) to generate the output with digital seal. In essence this is the concept of digital signature.
How can i achive this using SAP XI. Can anybody guide me...
Thanks in Advance..
Regards
Venkatesh

Hey,
refer to this link.
How XML Encryption can be done using web services security in SAP NetWeaver XI
Creating certificate in XI
How to use Digital Certificates for Signing & Encrypting Messages in XI
regads,
Milan

Similar Messages

Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code

I get this message when I check the Device manager for my Ipod
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
How do I resolve this I have reinstalled iTunes but it still doesn't recognise my ipod

I reinstalled Itunes a couple of times. I unistalled all programs that I never use, I updated all of my drivers, Windows swept my computer and found no problems. I have a yellow causion lite when I look at the USB-port with the phone connected. All other devices work without a problem.

Need a Suggestion For implementing the Digital Signature For the Documents

Hi,
Currently I am working in a Document Management System. I need a Good Suggestion for how to implement a Digital Signature For the Documents.
Thanks in Advance
Sabarish V

Hmm, if you are not using Oracle Payroll, what are you using for payroll? I am wondering why you could not use your payroll system, whatever it is, to handle this reimbursement program.
Well, you may want to talk to Oracle support about how to handle this in Oracle iExpense. You can certainly handle advances for Expense Reports. You would then apply the advance to the expense report items. The catch is I don't think you can stop expense item entry after the adavance is satisfied. You would have to set up a work flow process of some kind to have the expense reports reviewed and only approve expenses that are applied to the advance, is what I am thinking. Not your ideal solution, but something to think about. It could be the Oracle folks might know of a sneaky way to handle this. What you are trying to do is unusual. Employee advances are common, but the idea of not being able to exceed the advance amount is what unusual about this. Normally you will accept any expenses over the advance amount and reimburse the employee for those extra amounts not advanced.
Good luck.
John Dickey

"Windows cannot verify the digital signature for the drivers required for this device."

When I connect my iPod to my laptop, it only connects for about 10 seconds before disappearing. If I look at the iPod's properties in the Device Manager, it says:
Windows cannotverify the digital signature for the drivers required for this device. A recenthardware or software change might have installed a file that is signedincorrectly or damaged, or that might be malicious software from an unknownsource. (Code 52)

I would uninstall and reinstall the Apple software. See the following. The following also has a link for Win7/Vista
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

Windows cannot verify the digital signature for the drivers required for this device. Code 52

Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52).
I have reinstalled, uninstalled, the whole 9 yards.

See the driver topic of:
iOS: Device not recognized in iTunes for Windows
I would start with:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Windows cannot verify the digital signature for the drivers required for this device. A recent hardw

windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is singned incorrectly or damaged, or that might be malicious software from unknown source (Code 52)

Hi,
What are you trying to do ? To help us answer question quicker, please read this:
http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to/Welcome-Get-started-here/td-p/699035
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Focus for the input ready field in table

Hi,
i have few questions
1. i have table with tool bar button "add row" when i click that it will add a row with input ready field, but here i need scroll down for that, but what i need is it should automatically put the focus on it. please suggest how can i do that.
2. I have save button, when ever user enters improper input in the above input ready fields, i am giving error message, problem is it is clearing my table data at the same time, Please suggest where should i raise the error message.
3. i need two columns to be fixed in the table, while scrolling horizontally.
Please give your suggestions.

Hi,
Check the component for example wdr_test_table for COLUMN SCROLLING.
If you have 15 columns to be shown. Set the first 2 columns as (LEFT as fixed) and scrol count as 4.
For the first 2 columns set the property FIXED POSITION as LEFT and for table property scrollable colcount as 5.
Then you will get the scrolling adn also columns as fixed.
Regards,
Lekha.

How to handle Multiple date formats for the same date field in SQL*Loader

Dear All,
I got a requirement where I need to get data from a text file and insert the same into oracle table.
I am using SQL*Loader to populate the data from the text file into my table.
The file has one field where I am expecting date date data in multiple formats, like dd/mon/yyyy, yyyy/dd/mon, yyyy/mon/dd, ,mm/dd/yyyy, mon/dd/yyyy.
While using SQL*Loader, I can see Loading is failing for records where we have formats like yyyy/dd/mon, yyyy/mon/dd, mon/dd/yyyy.
Is there any way in SQL*Loader where we can mention all these date formats so that this date data should go smoothly into the underlying date column in the table.
Appreciate your response on this.
Thanks,
Madhu K.

The point being made was, are you sure that you can uniquely identify a date format from the value you receieve? Are you sure that the data stored is only of a particular limited set of formats?
e.g. if you had a value of '07/08/03' how do you know what format that is?
It could be...
7th August 2003 (thus assuming it's DD/MM/RR format)
or
8th July 2003 (thus assuming it's MM/DD/RR format)
or
3rd August 2007 (thus assuming it's RR/MM/DD format)
or
8th March 2007 (thus assuming it's RR/DD/MM format)
or even more obscurely...
3rd July 2008 (MM/RR/DD)
or
7th March 2008 (DD/RR/MM)
Do you have any information to tell you what formats are valid that would allow you to be specific and know what date format is meant?
This is a classic example of why dates should be stored on the database using DATE datatype and not VARCHAR2. It can lead to corruption of data, especially if the date can be entered in any format a user wishes.

Wrong digital signature for Add-on

I have just upgraded to 2004 (patch 5). My Add-on is installed (finally) and is successfully loading (finally)when SAP B1 is launched. Whenever I re-compile my Add-on for development and replace my Add-on exe I get the error "Wrong digital signature for Add-on" when SAP goes to load the Add-on again.
I cannot successfully create my .ard file without a digital signature for the Add-on .exe (even though the documentation says it is optional).
How can I test my Add-on in development mode if I have to re-create the .ard file and re-install the Add-on everytime I re-compile?? This does not seem correct.
Please advise. Thanks.

I found a solution to this problem.
We were not debugging in development mode properly.

Create electronic-digital signature for data

Hello
As possible create electronic-digital signature for data, referred through HTTP form internet explorer?
Thank you very much for your support.

George,
Thank you for your submission. It was helpful. This allowed me to create the signature block without having to place my own digital signature in the block. However, when I send it to my client (who has Adobe Reader but not Acrobat) she is unable to input her digital signature … I’m now half-way there but I continue to pursue a solution.
Dave Armstrong
============

Freetype OR digital signature in the same field?

Hello,
I'm creating a form for someone who wants to be able to use a digital signature OR free type within the same field.
I've tried creating a new combo box with the free type as the first option, but can't seem to figure out a way to have a digital signature as the second option.
Does anyone know if it's possible to get both options in one field?
Thanks in advance.

Thanks, George. You've helped me several times in the past and I know you're a power user, so if you say it's not possible, I know I'm barking up the wrong tree! Appreciate the reply.

How to format the text in a Digital Signature for a PDF in landscape orientation?

I have a custom Digital Signature plug-in which prompts the user to enter few details on a dialog and then renders the signature. Now, the problem is for a page which has PDPageGetRotate value as 90. In this case, the entire content(text) in the signature is rendered reversed i.e its displayed upside down. However, for a page in portrait mode, i.e with rotation value as 0, signature is correctly displayed.
Can anybody help me by explaining which callback/method to use to frame the text appearance? I think there needs to be some change in the parameters passed to DigSigAPCreateLayeredStreamEx, am i correct?
Let me know any comments/suggestions on this issue of correctly rendering text in a digital signature for a rotated page.

Just setup the appropriate transformation matrix.

Digital Signatures for Changing the statuses in Issue Mgmt

Hi
Has anyone put in place digital signatures for Issue
Managemnt when we change the status values in an issue.
We are looking at SAP Note 835584 - Digital signature for documents,
but that is not applicable for us as we want to initiate the digital
signature when the status profile "SLFI0001" kicks in and the status is
changed from one to the other.(eg in process to completed etc)
We have created the digital signature and the strategies, but are
looking for a place to attach this with the status profile "SLFI0001".
Is there a place we can attach the digital signature strategies to this
status profile?
Anyone has any ideas on how it can be done?
Thanks in advance..
sap ques..

We have a document that needs to be signed by more than one individual -- and in our process we are using the Topacz signature pad to get the signature. It's similar to the one you sign at the grocery store, drug store, etc. In order to NOT have the first signature invalidated, we were told to edit the registry...and it works perfectly!
[HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\8.0\AVAlert\cCheckbox]
"iDigSigSaveAsCertified"=dword:00000001
[HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\8.0\AVAlert\cCheckbox\cAnnots]
"iReaderEnableSaveWarn"=dword:00000001
Obviously if you are using a different version of Acrobat, you'll have to change the key accordingly.
Hopefully this will work with your process.
Good luck!!

Digital signature on the update is missing? So cannot load updates for MacBook or synch Ipad - Help

Digital signature on the update is missing or invalid.This message appeared when trying to up date ITunes in order to Synch with a new IPad.

Wondering how to download from update site? I have 10.6.8 and need to upgrade, do I jump to the most recent version, or to 10.7?
Also, if the automatic update doesn't work, what do I do to use something from the download site?

The digital signature for this package is incorrect- error itunes install

I won an ipod shuffle at MacWorld Wednesday. I need to update my itunes to 7.02, but keep getting this error after install is attempted:
The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed by “Apple”.
G5 Mac OS X (10.4.8)

Ok..... got no help, but through lots of trial and error found the following. If I download the file my work on a flash dirve it installs fine. Best I can see is it must be some issue with my Netgear router.
Try downloading on another system. File comes in as .dmg and then opens to a .mpkg when all is fine. Mine would never open the enclosing folder.
Best of Luck!
G5 Mac OS X (10.4.8)

Digital signature for the input data field

Similar Messages

Maybe you are looking for