Digital Signature in Adobe Forms

Hi ,
I want to know the data type for the Digital signature in Adobe , as i need the data type to map it to the Backend.
Thnaks
Manish

Hi Manish,
Data Type for Digital Signature :
Data Type : SIGN_GUID_22 CHAR 22
Thanks

Similar Messages

Digital Signature problem : Adobe forms

Hi Experts,
I am facing one issue in Adobe forms while implementing Digital Signature in one of the Custom Adobe form. I am following some steps as mentioned in the below link
<link to blocked site removed by moderator>
The problem is when I execute my Adobe form I am not getting SIGN button in my generated form as mentioned in the link.
I am using Adobe Live cycle designer 8.2 and Adobe reader 9.
Please help me out on this since I am new to Adobe forms as well.
Thanks
VJ
Moderator message: this is the wrong forum, please have a look in the forum for "SAP Interactive Forms by Adobe".
Edited by: Thomas Zloch on Oct 21, 2011 1:56 PM

Apart from the above question can anybody guide me whether do we need Adobe Acrobat instead of Adobe reader to implement Digital Signature in Adobe form.
Looking forward towards some useful suggestions!!
Thanks
VJ

ADOBE Form - How to include digital signatures in adobe forms?

Hi all,
Can any one tell me the procedure for including a digital signature in adobe form?
Thanks,
Vineel.

Hi,
If you have a third party software which captures the signatures (Ex: ePad), then you can have that integrated to SAP where all the signatures get stored as in SE78. From here you can insert directly in Adobe Form using Graphic Content method in an image field. Hope this is helpful for you.
Regards,
Ram

Digital Signatures in Adobe Forms (Non-Interactive)

Hi everyone,
I need to sign a receipt that will be sent by e-mail. The form is non-interactive, it´s only a simple receipt. This form may be printed or sent by e-mail; in case of being sent it must be signed before sending it. The receiver should be able to open it using Adobe Reader.
I´ve read other posts/help about singatures in Adobe Forms, but none of them of non-interactive forms; I need to know if it is possible to do this if the form is not interactive, and how it can be done.
Thanks!
Pablo

Hi Jinal,
Here it goes:
report fp_pdf_test_07.
* set signature
class cl_fp definition load.
selection-screen begin of block s_files with frame title text-100.
parameters: p_pdf(64)    type c lower case obligatory,
              p_out(64)    type c lower case obligatory.
selection-screen end of block s_files.
selection-screen begin of block s_conn with frame title text-101.
parameters: p_dest       type rfcdest default 'ADS' obligatory.
selection-screen end of block s_conn.
selection-screen begin of block s_sig with frame title text-102.
parameters: s_key(64)    type c lower case,
              s_field(64) type c lower case,
              s_reason(64) type c lower case,
              s_loc(64)    type c lower case,
              s_cinfo(64) type c lower case.
selection-screen end of block s_sig.
types: ty_raw(255) type x,
       ty_tab type standard table of ty_raw.
data: l_filename_pdf   type string,
      l_filename_out   type string,
      l_fp             type ref to if_fp,
      l_pdfobj         type ref to if_fp_pdf_object,
      l_pdf            type xstring,
      l_out            type xstring,
      l_fpex           type ref to cx_fp_runtime.
l_filename_pdf = p_pdf.
l_filename_out = p_out.
perform load_file using    l_filename_pdf
                    changing l_pdf.
* get FP reference
l_fp = cl_fp=>get_reference( ).
try.
*   create PDF Object
    l_pdfobj = l_fp->create_pdf_object( connection = p_dest ).
*   set document
    call method l_pdfobj->set_document
      exporting
        pdfdata = l_pdf.
*   set signature
    call method l_pdfobj->set_signature
      exporting
        keyname     = s_key
        fieldname   = s_field
        reason      = s_reason
        location    = s_loc
        contactinfo = s_cinfo.
*   execute, call ADS
    call method l_pdfobj->execute( ).
*   get result -> l_out
    call method l_pdfobj->get_document
      importing
        pdfdata = l_out.
catch cx_fp_runtime_internal into l_fpex.
    perform error using l_fpex 'INTERNAL ERROR'.
catch cx_fp_runtime_system into l_fpex.
    perform error using l_fpex 'SYSTEM ERROR'.
catch cx_fp_runtime_usage into l_fpex.
    perform error using l_fpex 'USAGE ERROR'.
endtry.
check l_fpex is initial.
* download PDF
data: l_len      type i,
        l_tab      type tsfixml.
call function 'SCMS_XSTRING_TO_BINARY'
    exporting
      buffer                = l_out
    importing
      output_length         = l_len
    tables
      binary_tab            = l_tab.
call method cl_gui_frontend_services=>gui_download
    exporting
       bin_filesize            = l_len
       filename                = l_filename_out
       filetype                = 'BIN'
    changing
       data_tab                = l_tab
    exceptions
       others                  = 1.
if sy-subrc = 0.
    write:/ 'Datei erfolgreich geschrieben'(001).
else.
    write:/ 'Fehler beim Schreiben der Datei'(002).
endif.
form error using p_fpex type ref to cx_fp_runtime
                 p_str type string.
data: l_errcode type i,
      l_errmsg   type string,
      l_string   type string.
write:/ '***************************************************'.
write:/ '***', p_str.
write:/ '***************************************************'.
skip 2.
call method p_fpex->get_errall
    importing
      errcode = l_errcode
      errmsg   = l_errmsg.
write:/ 'ERROR CODE       : ', l_errcode.
write:/ 'ERROR MESSAGE    : ', l_errmsg.
l_string = p_fpex->get_text( ).
write:/ l_string.
endform.
form load_file using    p_filename type string
               changing p_content type xstring.
data: l_rawtab type ty_tab,
      l_len    type i.
call method cl_gui_frontend_services=>gui_upload
    exporting
      filename                = p_filename
      filetype                = 'BIN'
    importing
       filelength             = l_len
    changing
      data_tab                = l_rawtab
    exceptions
      file_open_error         = 1
      file_read_error         = 2
      no_batch                = 3
      gui_refuse_filetransfer = 4
      invalid_type            = 5
      no_authority            = 6
      unknown_error           = 7
      bad_data_format         = 8
      header_not_allowed      = 9
      separator_not_allowed   = 10
      header_too_long         = 11
      unknown_dp_error        = 12
      access_denied           = 13
      dp_out_of_memory        = 14
      disk_full               = 15
      dp_timeout              = 16
      not_supported_by_gui    = 17
      error_no_gui            = 18
      others                  = 19.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
               with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
perform convert_tab_to_x using    l_rawtab l_len
                           changing p_content.
endform.
form convert_tab_to_x using    p_rawtab type ty_tab
                               p_len    type i
                      changing p_xstr   type xstring.
data: l_line type ty_raw,
      l_count type i,
      l_len   type i,
      l_rest type i.
describe table p_rawtab lines l_count.
loop at p_rawtab into l_line.
    if sy-tabix = l_count.
      l_rest = p_len - l_len.
      concatenate p_xstr l_line(l_rest) into p_xstr in byte mode.
    else.
      concatenate p_xstr l_line into p_xstr in byte mode.
      add 255 to l_len.
    endif.
endloop.
endform.
Good Luck!
Pablo

How i add digital signature in interactive form

Hi gurus,
I want to upload an Digital Signature in Adobe forms. Could any body tell me the procedures please help me out.
Thank you,
pawan

Hi Pawan,
Inorder to make use of Digital Signatures in forms, you have to first configure the ADS based on SSL and not Basic Authentication. Refer to the ADS Configuration guide for the same.
After the configuration using SSL as the security mode, you need to place a signature field when designing the Adobe form.
In addition you need to create a signature in Adobe Reader(if used to display the form) which you can use to sign the document at runtime.
Hope this helps.

How to create a digital signature in adobe reader

how to create a digital signature in adobe reader?

Adobe Reader Touch (Windows Store app with "modern" UI) does not support any types of signatures yet.
Digital Signatures with certificates
Electronic Signatures (that are legally enforceable)
Signature annotations (hand-writing annotations which may not be secure and legally enforceable)
Adobe Reader XI (traditional desktop app with classic UI) supports #1 and #3.
Adobe EchoSign supports #2.
Adobe Reader for iOS/Android supports #3.

Digital Signatures in Adobe 8 Professional

I have 2 questions regarding digital signatures in Adobe Acrobat Professional
1.) Is it possible to digitally sign a document multiple times without having to resave the document each time you sign? This would be really helpful in dealing with contracts in adobe where multiple signatures are required.
2.) If you email a pdf with digital signatures is it possible for the recipient to delete these signatures? Or to not be able to view them?
Thanks a lot!

Regarding #1, the short answer is no. Every time the file is digitally signed it necessitates it being saved. That's what allow "View Signed Version" and signature roll back to work.
As for # 2, it depends on the version of Acrobat. Versions 6 and 7 allowed anyone to remove a signature as long as it wasn't a certifying signature. In the case of the certifying signature on the signer could remove. Beginning with version 8 you can only clear if you have access to the digital ID that was used to create the signature.
Steve

Appearance of Digital Signature in Adobe Acrobat 8

I am creating a digital Signature in Adobe Acrobat 8 and am having difficulty getting all the information to appear clearly. The first example below shows, the signature, name and date. I would also like to include the name of the Company. The only way I have been able to do that is by clicking the “distinguished name” box in the appearance section of the digital signatures. An example of this signature is also shown below. However, additional information such as the name (again), email and country are also being listed. There are numerous abbreviations and equal signs now appearing as well. Ideally I would like the signature to look like the first one with the company name appearing just above the person’s name. Can anyone help me do this?
Thank you!

Hi,
For the first problem (word wrap). The problem you are encountering is if "Maryanne Doe" is too long to fit in half of the signature field, the text wraps to the next line. The signature appearance that is written into the signature field consists of two halves. The left half contains the graphic properties and the right half contains the text properties.
You need to lengthen the width of the area where the graphics portion of the signature is contained. You can do this one of two way. Either lengthen the physical dimensions of the signature field before you sign. Or, you could create a custom signature appearance where you turn off all of the text properties, which has the effect of giving the whole signature fields over to the graphics portion. To play with custom signature appearances:
Select the Edit > Preferences (Win) or the Acrobat > Preferences (Mac) menu item
Select Security from the Categories list box
Click the New button in the Appearance group box
If you select the No Graphic radio button you give all of the space to the text portion. If you deselect all of the checkboxes in the Configure Text area, you give all of the space to the graphics portion.
While you are in the Preferences dialog, select Identity from the Categories list box. Go ahead and fill in all of the editable fields. This is where the data is procured during the creation of a self-signed digital ID. I think that will fix the second issue you raised.
Steve

Problem creating PKCS# 12 Digital Signature in Adobe Reader X - where do I confirm the Password?

I cannot create a PKCS# 12 Digital Signature in Adobe Reader X. It says the passwords don't match when I create it. The problem is, I never was asked to confirm the P/W when I created it. It asked once for the P/W and then the only thing I can do is click "Finish" and then it says my P/W don't match. I am able to create a DS on my other computer using Reader 9 (and it did ask me to confirm the P/W when creating). I have re-booted my computer and still it will not work.

You'll need to ask in the Acrobat Pro forum. There are people there with expertise who can answer this. I use Acrobat myself, but I'm a novice when it comes to signature settings.

Implement Digital signatures in adobe using sap

how do i implement digital signatures in adobe using sap web dynpro netweaver and abap for backend? if you can provide some documents or links that can help for the same.

Hello,
You can add digital signatures and/or encryption to the document going out of the SAP system.
To add a signature from WDA you can use the PDFObject API.
Regards,
Francois

Digital Signatures on Scanned forms

Is it possible to apply Digital Signatures on Scanned form; i.e can we add a hidden signature field?
Thanks,
Nith

Answered my own question. These numbers represent the time zone of the area where the digital signature was created.

I can't affix my valid digital signature to adobe reader pdf document?

I can't affix my valid digital signature to adobe reader pdf document. When the signature field is clicked, it is not showing my digital ID so that I can sign with it. Why it is not displaying my valid digital ID?

What is your operating system? What is your Reader version? What means "can not"?
Can you post a screenshot of such a message "to buy Adobe XI"?

Form 16 With digital signature giving adobe document corrupted output

Dear All,
We have configured ads and implementing form 16 with digital signature,we have done the all configuration as per SAP Guide and dezso blogs,but when generating the form 16 with digital signature its giving
"Adobe reader could not open _xxxxx.pdf because it is either not a supported file type or corrupted,
we have done the same configuration in dev its working fine and prd its not working,request you to please provide the solution for the same.
as per some check list i have cheked ads_https is working fine,but when executing the report fp_pdf_test_00 with rfc ads_https its asking for user name and password,we have maintained the same user name and password for abap and java for both adsuser and ads_agent still same issue,
pelase suggest.
please find attached screenshot for your reference.
Regards,
Basis

This can be done but you must use the Document Form var to route the signed pdf. You must configure the FormGuide submit button to 'Submit from PDF' in Guide Builder.
Also the button on the form must be configured to submit as 'PDF' (not XDP). This change is done when you open the form in designer.
Note that after you have submitted the signed pdf you will be dealing with a pdf subsequently.
Attached is a sample FormGuide.

How do I remove a digital signature from Adobe Acrobat Pro. I have set it up wrongly.

I created a digital signature but I wanted to change the signature and it also was not password protected. So I deleted the signature but cannot delete the certificate to set it up again.
Mac OS X (Operating System)
So I am unable to delete the digital signature in Acrobat Xi pro.
I did the following: Adobe | Preferences | Signatures | Creation and Appearance Preferences and deleted the signature. But Adobe | Preferences | Signatures | Digittal ID and Trusted Certificate Settings, does not want to delete.
Tank you.

It's not clear to me what you're trying to accomplish. If you get rid of your digital ID you will still be prompted to create/add one when you need to sign a form, which you say you still need to do? Do you really just want to e-sign (hand-drawn signature, or stamp) instead of digitally sign? Do the forms you're using have digital signature fields?

How to print a signature in Adobe form using PCL - HELP!

Hello,
I'm using Adobe LiveCycle and I'm trying to get my form to print a signature at the bottom right on the given signature line. Our HP LaserJet printer has a SIMM installed which contains the signature in digitized form. I need to issue a hexadecimal instruction using PCL which contains the code that tells the printer to print the stored signature. I know this is doable in SAPscript, but is it doable in Adobe???
Thank you,
Eileen

Hi Eileen,
I think it is handled differently in Adobe forms as here all the print data is created by ADS.
See the document Digital Signature Setup at:
www.service.sap.com/hrin -> Media Center -> Key Documents
This decribes the process.
The link below and SAP Note 1168740 also contain information.
http://help.sap.com/saphelp_nw70/helpdata/EN/46/1ca382f3ec5873e10000000a11466f/frameset.htm
Regards,
Aidan

Digital Signature in Adobe Forms

Similar Messages

Maybe you are looking for