Digital Signatures for Mobile Devices

We currently use smart cards that have our digital signatures and would like to have this transferred or be able to use on a mobile device. Our forms currently require digital signatures, however, the person can't view the form (created in Livecycle designer ES2) from the mobile phone, therefore we need to upgrade to ES4. Will we be able to use our current signatures using mobile, without having to use a signature created from Adobe?

LiveCycle ES4 has Mobile Forms module which actually capable of rendering your existing XFA based forms as HTML5 based form which could be opened on Mobile devices as well.
Mobile Form has Scribble signature for Mobile devices, the digital signature is not supported on Mobile devices.Check this : http://helpx.adobe.com/livecycle/topics/mobile-forms-dev.html
Thanks,
Wasil

Similar Messages

Digital Catalog for iOS Devices?

Hello I am trying to make an epub and/or an online catalog for my business so people can open them up on an Ipad. If someone could possibly tell me the steps to how to do this, that would be really awesome. I have already made the pages in photoshop and Illustrator CS5 and arranged them in InDesign CS5 then exported them to Flash to create the buttons to switch pages, then converted to an html file using wallaby technologies, but when I try opening it up in the html file the buttons will not work or even show up. I even tried switching the buttons to ones I have made in Illustrator and it still didn't work. It works fine when I am opening it up the swf file on my computer but I cant send the swf file for some reason. And my objective is to send this online catalog out by mail and emails. If someone could please help me accomplish this, I would much appreciate this.
And no I do not have a couple hundred to buy Adobe Digital Publishing Suite.
I have Adobe Design Premium CS5 which includes: InDesign, Illustrator, Photoshop, Dreamweaver, flash, flash catalyst, fireworks, media encoder, bridge, device central, & extension manager.
Can someone help me without telling me to buy something else?

LiveCycle ES4 has Mobile Forms module which actually capable of rendering your existing XFA based forms as HTML5 based form which could be opened on Mobile devices as well.
Mobile Form has Scribble signature for Mobile devices, the digital signature is not supported on Mobile devices.Check this : http://helpx.adobe.com/livecycle/topics/mobile-forms-dev.html
Thanks,
Wasil

Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code

I get this message when I check the Device manager for my Ipod
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
How do I resolve this I have reinstalled iTunes but it still doesn't recognise my ipod

I reinstalled Itunes a couple of times. I unistalled all programs that I never use, I updated all of my drivers, Windows swept my computer and found no problems. I have a yellow causion lite when I look at the USB-port with the phone connected. All other devices work without a problem.

"Windows cannot verify the digital signature for the drivers required for this device."

When I connect my iPod to my laptop, it only connects for about 10 seconds before disappearing. If I look at the iPod's properties in the Device Manager, it says:
Windows cannotverify the digital signature for the drivers required for this device. A recenthardware or software change might have installed a file that is signedincorrectly or damaged, or that might be malicious software from an unknownsource. (Code 52)

I would uninstall and reinstall the Apple software. See the following. The following also has a link for Win7/Vista
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

Windows cannot verify the digital signature for the drivers required for this device. Code 52

Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52).
I have reinstalled, uninstalled, the whole 9 yards.

See the driver topic of:
iOS: Device not recognized in iTunes for Windows
I would start with:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Windows cannot verify the digital signature for the drivers required for this device. A recent hardw

windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is singned incorrectly or damaged, or that might be malicious software from unknown source (Code 52)

Hi,
What are you trying to do ? To help us answer question quicker, please read this:
http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to/Welcome-Get-started-here/td-p/699035
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Creating a site for mobile devices

Good morning,
I have a number of questions relating to the creation of a
site for mobile devices. My client has given me the assignment to
re-design his current website, and to also create a sub-site
suitable for mobiles. I have spent a number of hours looking around
on the Internet and trying to gain a better understanding of these
issues. Still, a number of questions remain. if you can give me any
additional understanding, that would be great.
Question 1:
Is my understanding correct: I basically need to create two
sites, one for the wide-screen browser, and one for the mobile
browser? I can direct visitors to the mobile site using a CSS or
javascript link - if their browser identifies them as a mobile
browser?
Question 2
Mobile devices come in all sorts of shapes and sizes and
versions. PDA\s and iPhone's have different screensizes and
resolutions that smart--phones, which in turn are different again
from older and simpler phones. Should I design a site for a number
of different types of phones? That would a huge amount of work...
Question 3
I also own Device Central, an App which I should think is
very useful in this situation. But I fail to understand it! OK, so
I can see what my photo or website or flash file looks like on my
Nokia N73 - but I am not designing specifically for that phone. I
also want my design to look good on all the other phones! My client
needs a website that is not tailored to one phone, but to all
phones.
Question 4
And why does Device Central not have profiles for the iPhone?
I would think it is popular enough to warrant its own profile... (I
post this from the Netherlands, where the iPhone is not carried
yet, and so I have only ever held one in my hand). Is this because
the iphone can see regular sites just fine?
Question 5
How does Dreamweaver help me build a mobile site?
Question 6
My client wants to show video on his website. In fact, that's
what this website is all about: showing sports-videos from high
profile sporting events. Which video-formats are most suitable?
Question 7
Do all mobile phones support flash? Or only a few? Or none?
It seems to me that a flash website would allow for more creativity
in the design.
Thanks for any help you can give. Any resources you could
point me to are also very welcome...
Sincerely,
Rogier Bos
Rotterdam, The Netherlands

Macnimation wrote:
> Hi,
>
> I'm experimenting with creating a small site off a
standard site, for mobile
> phone/devices.
>
> Basically, I want to load a basic list page, which has
links to pages that
> will display and run flash movies.
>
> The flash movies, in FLV format are already at 640 x 480
which run fine in the
> main site.
>
> Is it simply to resize the movies to fit the mobile
content size , or will
> they "auto" resize?
>
> Do I have to chnage the webserver configuration in
anyway, its a standard IIS
> site at the moment, but MySQL with apache is also an
option.
>
> Would standard html do or would the pages have to be
done using xhtml or wml?
>
> I would like if possible to get this infomration first
before starting it, so
> I can possibly reduce delays.
>
> Any help or pointers to tutorials would be grateful
>
I'd like to check out the PDA scene some day soon, too. In
the meantime,
there's a recent discussion of this topic here:
http://www.sitepoint.com/forums/showthread.php?p=3288343#post3288343
www.geobop.org - Family Websites
www.invisible-republic.org - Adult political websites (Mature
adults only)

I would like to see sliding menu widgets for mobile devices.

I would like to see sliding menu widgets for mobile devices.

You can tell Apple at the link below.
http://www.apple.com/feedback/iphone.html

Need a Suggestion For implementing the Digital Signature For the Documents

Hi,
Currently I am working in a Document Management System. I need a Good Suggestion for how to implement a Digital Signature For the Documents.
Thanks in Advance
Sabarish V

Hmm, if you are not using Oracle Payroll, what are you using for payroll? I am wondering why you could not use your payroll system, whatever it is, to handle this reimbursement program.
Well, you may want to talk to Oracle support about how to handle this in Oracle iExpense. You can certainly handle advances for Expense Reports. You would then apply the advance to the expense report items. The catch is I don't think you can stop expense item entry after the adavance is satisfied. You would have to set up a work flow process of some kind to have the expense reports reviewed and only approve expenses that are applied to the advance, is what I am thinking. Not your ideal solution, but something to think about. It could be the Oracle folks might know of a sneaky way to handle this. What you are trying to do is unusual. Employee advances are common, but the idea of not being able to exceed the advance amount is what unusual about this. Normally you will accept any expenses over the advance amount and reimburse the employee for those extra amounts not advanced.
Good luck.
John Dickey

Creation of a database engine for mobile devices using j2me

am trying to develop a database engine for mobile devices.. it is to develop a miniature version of the DBMS that
can be deployed on a mobile phone..I have to develop my own code for performing tasks such a s creating a table,
inserting values into it, selecting from it etc..
I limited my self to develop the software so that it can perform 3 functionalities of create, insert,select..
I should be taking the details such as table name and its parameters from the user and then should be able to
create a suitable data structure for it(i tried to develop a class)...
Usage of RMS package helps me partially in this.. I did that and ll be doing that..
I got stuck while developing the code for creation of a table.. I am facing problems in creating a dynamic data
structure for a table and also to use such data structure else where in my project..
I need help in developing an algorithm for this..
I would be very grateful to u all if u help me out in developing the code for this project..

I'm sorry for the amount of time it took me to get back. Derby is an open source database written entirely in Java. I do not know if it can support resource constrained devices like MIDP compliant, but may work okay with CLDC.
But outside of Derby being a solution, let me give you a few ideas off the top of my head.
Set up a database server in a separate thread. This server will really be your controller for RMS access.
Since RMS is just a big sequential 'pipe' you will have to think of data as 'frames' - (starttable) (tableID) (tablename) (data) (tablename) (data).....(endtable).
When you need to write additional data, just append it to the end of the RMS object.
When you need to retrieve data, thing are more complex.
1. Read in all data, looking for your particular tableID. This may be made much easier using RMS filters - (I'm not sure, I've never used them)
2. Once start of table of interest is found, stick the data elements in either a java vector or array until you reach the table end identifier. I think vector will be a better choice - trust me. (I think its available in J2ME...)
3. Package this into a do while loop until the element you are searching for is read. If you need to do some sorts on the data or something else that requires the all the data to be present then you need all the data for that particular table. One thing will always be clear. The first data you grab will always be some start table identifier and the last data you grab will be an end table identifier. We just don't know which table because of how we put stuff in the RMS resource.
This provides you a few positives as well as negatives:
Positive:
1. Fast data writes, no need to search for a particular table before accessing it, nor do you need to search for an index in that table.
2. When looking for data, data may* be found without searching through the entire table. This is accomplished with RMS filters or logic test within the RMS read loop.
Negative:
1. Slow when all data of a table is needed (i.e. compute sums or averages of entries). The entire RMS database must be read to ensure all the entries are searched. An example of how this is a problem is as follows: You have 5000 entries in you RMS database resource and you are looking to compute the average of a value in some table. When you first wrote the data to the table, it was done sequentially and no other data for that table exist. But we can't tell if that's the case, so we have to read through all 5000 entries to make sure we looked for every piece of data.
Beacuse of this issue, this database structure, performance may be fine for 50K - 100K entries (depending on table element size), if the reading requirements don't force full data reads. Otherwise, 25K may be an upper limit.
I hope this helps.
Edited by: estarkey on Mar 17, 2009 9:15 PM
Edited by: estarkey on Mar 17, 2009 10:01 PM

How to format the text in a Digital Signature for a PDF in landscape orientation?

I have a custom Digital Signature plug-in which prompts the user to enter few details on a dialog and then renders the signature. Now, the problem is for a page which has PDPageGetRotate value as 90. In this case, the entire content(text) in the signature is rendered reversed i.e its displayed upside down. However, for a page in portrait mode, i.e with rotation value as 0, signature is correctly displayed.
Can anybody help me by explaining which callback/method to use to frame the text appearance? I think there needs to be some change in the parameters passed to DigSigAPCreateLayeredStreamEx, am i correct?
Let me know any comments/suggestions on this issue of correctly rendering text in a digital signature for a rotated page.

Just setup the appropriate transformation matrix.

Digital Signatures for Changing the statuses in Issue Mgmt

Hi
Has anyone put in place digital signatures for Issue
Managemnt when we change the status values in an issue.
We are looking at SAP Note 835584 - Digital signature for documents,
but that is not applicable for us as we want to initiate the digital
signature when the status profile "SLFI0001" kicks in and the status is
changed from one to the other.(eg in process to completed etc)
We have created the digital signature and the strategies, but are
looking for a place to attach this with the status profile "SLFI0001".
Is there a place we can attach the digital signature strategies to this
status profile?
Anyone has any ideas on how it can be done?
Thanks in advance..
sap ques..

We have a document that needs to be signed by more than one individual -- and in our process we are using the Topacz signature pad to get the signature. It's similar to the one you sign at the grocery store, drug store, etc. In order to NOT have the first signature invalidated, we were told to edit the registry...and it works perfectly!
[HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\8.0\AVAlert\cCheckbox]
"iDigSigSaveAsCertified"=dword:00000001
[HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\8.0\AVAlert\cCheckbox\cAnnots]
"iReaderEnableSaveWarn"=dword:00000001
Obviously if you are using a different version of Acrobat, you'll have to change the key accordingly.
Hopefully this will work with your process.
Good luck!!

Implementing digital signatures for Form 16

I have configured ADS for my development ECC. I need to configure digital signatures for Form 16. Please can anybody guide me how to go about this. I am unable to find a proper document.

I am following the below mentioned steps for Digital Signature implementation in form 16 HR,but i am stuck in step 3,can anyone guide me through.
Transaction code: STRUST
1. Select the newly created ‘SSL Client SOAPClient’
2. Select Edit -> Create Certificate Request
3. Copy the Request and sign it (SAPNetCA)
a) Select Edit -> Import Certificate Response and save
b) Double click and select ‘SSL Client SOAPClient’ option to load the certificate
c) Add ‘SSO_CA’ and ‘SAPNetCA’ to Certificate List and save
Regards,
Rohit

Digital Signatures for mutliple company code

Hi,
Our client have multiple company codes & they want to use digital signature for all the company code and there be individual authorised digital signatory for each comp code.
Now the question is , whether we have procure different digital signature for individual company codes & if so how system will identifies which authorised ditigatl signature should be assigned to respective company code...?
=> We are not able to download Adobe Form local & aslo is it mandatory to have digital signature to download Form 16 on a local system.
System details : ECC 6
SP Level : 38
Thanks & Regrads,

Digital Signature is person specific
You have to take the Digital signature ( A number assigned for each signatory with the tool),from an authorized services provided by NSDL
In a single company code if you have 2/3 signatories , first you need to make groups based on the signing authorities, in combination of PA/PSA/EG/ESG/BA etc
The form 16 is to be generated on the above criteria applicable.
3 file of form16 will be generated and send accross to 3 signing authorities
The signing authority can open the form using the tool ,digitial signatory software install and can authenticate the form16.
As per NSDL form16 is now not an statuory doucment. Its just an Tax Information of an Employee.
which is not required to be attached with your ITR's also
So why do you require the Digital signature to be printed on the form16 . Pls check this up with your finance team
Thansk & Regards
Hemant V. Mahale

How to get digital signature for Google Map geocoding V3 in PL/SQL?

Hi, Gurus:
    Could anyone provide me an example about how to generate digital signature for Google Maps service v3 in PL/SQL? We tried to upgrade our program using Google maps service from v2 to v3. We are using PL/SQl on background to send request to Google for geocoding. We found some sample code to register with digital signature, but none of them is based on PL/SQl. Notice I used Google business client ID "gme-XXX" and wallet.
https://developers.google.com/maps/documentation/business/webservices/auth#digital_signatures
Google Maps API - more URL signing samples
Here is my code for V2. I notice in order to get signature, I need to use HMAC-SHA1 algorithm.
procedure Get_Geocoding(P_s_Address in varchar2, P_s_Geocoding out varchar2, P_n_accuracy out number, P_b_success out boolean) is
l_address varchar2(4000);
l_url varchar2(32000);
l_response varchar2(3200);
n_first_comma number;
n_second_comma number;
n_level_length number;
BEGIN
/* TODO implementation required */
l_address:=APEX_UTIL.URL_ENCODE(P_s_Address);
l_address := replace(l_address,' ','+');
l_url := 'http://maps.google.com/maps/geo?q='||l_address||'&'||'output=csv'||'&'||'client=gme-XXX';
l_response := utl_http.request(l_url, APEX_APPLICATION.G_PROXY_SERVER, '/u02/app/oracle/admin/apexsb/wallet', 'XXXXXXXX');
n_level_length:=0;
n_first_comma:=instr(l_response,',',1,1);
n_second_comma:=instr(l_response,',',1,2);
n_level_length:=n_second_comma-n_first_comma-1;
P_n_accuracy:=0;
if n_level_length>0 then
P_n_accuracy:=to_number(substr(l_response,n_first_comma+1, n_level_length));
end if;
l_response:=substr(l_response,instr(l_response,',',1,2)+1);
--dbms_output.put_line('In function: l_response ='||l_response);
P_s_Geocoding:=l_response;
if (P_s_Geocoding<>'0,0') then
P_b_success:=true;
--dbms_output.put_line('true');
else
P_b_success:=false;
--dbms_output.put_line('false');
end if;
END;
Thanks!

Hi, guys:
    I tried to generate digital signature for Google map service
     Maps for Business: Generating Valid Signatures - YouTube
    Generating an HMAC-SHA-1 Signature Using Only PL/SQL
      OAuth and the PL/SQL | Data Warehouse in the Cloud
   but I got error message from Google:
Unable to authenticate the request. Provided 'signature' is not valid for the provided client ID. Learn more: https://developers.google.com/maps/documentation/business/webservices/auth
   I think there is something wrong with my code to generate signature, as if I remove the part regarding client and signature, it will work, can anyone help me on this problem?
/*Procedure Get_Geocoding is used to get geocoding with accuracy level for V3 business account, you can find Google map digital signature descrirption from
https://developers.google.com/maps/documentation/business/webservices/auth#digital_signatures
if geocoding is 0,0, procedure returns false to indicate failure of get geocoding*/
procedure Get_Geocoding2(P_s_Address in varchar2, P_s_Geocoding out varchar2, P_n_accuracy out number, P_b_success out boolean) is
--private key for Google business account, this is provided by Google with client name.
l_private_key_src varchar2(200):='xxxxxxxxxxxxxxxxxxx';
l_private_key_b64_alter varchar2(200):= translate(l_private_key_src,'-_','+/');
l_private_key_bin raw(2000);
l_client_name varchar2(100):='gme-xxx';
l_signature_mac raw(2000);
l_signature_b64 varchar2(200);
l_signature_b64_alter_back varchar2(200);
l_Google_service_domain varchar2(200):='http://maps.googleapis.com';
l_address varchar2(4000);
l_url varchar2(32000);
l_path varchar2(32000);
l_response varchar2(32000);
l_page UTL_HTTP.HTML_PIECES;
n_actual_length number;
json_obj json;
json_tempobj json;
jl_listOfValues json_list;
json_geom_obj json;
json_loc json;
l_lat VARCHAR2(40);
l_lng VARCHAR2(40);
l_status VARCHAR2(255);
json_accuracy json;
--temp_string varchar2(10000);
n_first_comma number;
n_second_comma number;
n_level_length number;
BEGIN
/* TODO implementation required */
l_private_key_bin := utl_encode.base64_decode(UTL_I18N.string_to_raw(l_private_key_b64_alter, 'AL32UTF8'));
l_address:=APEX_UTIL.URL_ENCODE(P_s_Address);
--dbms_output.put_line(l_address);
l_address := replace(l_address,' ','+');
l_path := '/maps/api/geocode/json?address='||l_address||'&'||'sensor=true';
dbms_output.put_line(l_path);
l_signature_mac :=DBMS_CRYPTO.mac(UTL_I18N.string_to_raw(l_path, 'AL32UTF8'), DBMS_CRYPTO.hmac_sh1,l_private_key_bin);
l_signature_b64:= UTL_RAW.cast_to_varchar2(UTL_ENCODE.base64_encode(l_signature_mac));
l_signature_b64_alter_back:=translate(l_signature_b64,'+/','-_');
dbms_output.put_line(l_signature_b64_alter_back);
--get response from Google map service
l_url:=l_Google_service_domain||l_path||'&client='||l_client_name||'&signature='||l_signature_b64_alter_back;
--l_url:=l_Google_service_domain||l_path;
dbms_output.put_line(l_url);
l_page:=utl_http.request_pieces( l_url, 99999);
for i in 1..l_page.count loop
l_response:=l_response||l_page(i);
end loop;
n_actual_length:=length(l_response);
dbms_output.put_line(n_actual_length);
dbms_output.put_line(l_response);
--parse JSON result
json_obj:=new json(l_response);
l_status := json_ext.get_string(json_obj, 'status');
IF l_status = 'OK' then
jl_listOfValues := json_list(json_obj.get('results'));
json_tempobj := json(jl_listOfValues.get(1));
json_geom_obj := json(json_tempobj.get(3));
json_loc := json_ext.get_json(json_geom_obj, 'location');
l_lat := to_char(json_ext.get_number(json_loc, 'lat'));
l_lng := to_char(json_ext.get_number(json_loc, 'lng'));
P_s_Geocoding:=l_lat||','||l_lng;
dbms_output.put_line('##########'||P_s_Geocoding);
case json_ext.get_string(json_geom_obj, 'location_type')
when 'ROOFTOP' then P_n_accuracy:=9;
when 'RANGE_INTERPOLATED' then P_n_accuracy:=7;
when 'GEOMETRIC_CENTER' then P_n_accuracy:=5;
else P_n_accuracy:=3;
end case;
P_b_success:=true;
else
P_b_success:=false;
P_n_accuracy:=0;
P_s_Geocoding:='0,0';
end if;
END;

Digital Signatures for Mobile Devices

Similar Messages

Maybe you are looking for