Digital sound

Hi everyone.Does anyone know if there is anyway for me to play back in digital sound (ac3) movies i downloaded to my ipod nano 3G...what i mean is that I play them back through my TV but it plays them in surround sound, as I wanted to come out in AC3 digital sound.Thank you for your help in advance...Jose...

thank you so much for your answer.It is a defenite shame.I guess i was asking for to much...lol

Similar Messages

  • Audigy 4 Digital sound set up. Help me please!!

    I recently brought an Audigy 4 sound card. I want to hook it up through my digital amp so i can have 5. digital sound etc. I connected the card with an optical cable in the digital input socket on the card.....Nothing works.
    What am i doing wrong?
    Do i need a different kind of cable? If so which one? Or is there someting i need to do in set up?
    Please help me. Many Thanks

    Contacts are designed to be synced to a supported application or cloud service.  If you have failed to use the device as designed, there is no guarantee that the contacts are safe.
    iTunes will back up the following information
    Contacts* and Contact Favorites (regularly sync contacts to a computer or cloud service such as iCloud to back them up).
    * Your contacts are part of the backup to preserve recent calls and favorites lists. Back up your contacts to a supported personal information manager (PIM), iCloud, or another cloud-based service to avoid any potential contact data loss.

  • Analog sound signal no digital sound

    I have a A660-BT2G25 laptop which includes DOLBY® Advanced Audio.  I connected it via an HDMI cable to the back of my Denon receiver and set the receiver to receive either digital sound input or analog sound input from the laptop that I am currently using as part of my entertainment center. All items in my device manager are operating properly (the system shows NVIDIA High Definition Audio under sound four identical times with all divers identical in each, all with normal operation & no conflicts-not sure if this is normal). The computer recognizes the Receiver as an Denon AVAMP-3 in the sound setup in Control Panel. Further,  I have set it as the default and run test after test. The properties there indicate the device is operating normally and shows DTS, Dolby Digital and Dolby Digital Plus. w/HDCP supported, up to 192 sampling rate, 16 & 24 bit. Here is the rub. My receiver is only receiving analog signals under PCM (analog signal) and not DTS (digital) so while the sound is good and clear per my receiver upgrading the signal, there is no digital splitting of the signal to the 5.1 channels. If I force the receiver to take only DTS signals over the HDMI cable there is no sound at all. There is nothing wrong with the receiver. Anybody have any suggestions???

    Hi, I just purchased a Mac Pro and am running 10.5.2. I am seeing the exact same behaviour when using the optical digital out from the Mac Pro to a Teac Receiver. It takes about 5 seconds for the audio to start playing from a "silence". If there is continuous playback there are no problems, but if there is ever a significant pause in the audio the receiver shows "unlock" on the display and stops playing out audio.
    It certainly does seem like the digital stream is getting interrupted which then causes an issue with the receiver.
    I haven't been able to find a solution yet.

  • No CD Digital sound in Audigy 2 ZX + X

    Hi, I have a problem getting the cd digital sound to work with the audigy 2 ZX on XP64 (latest drivers, installed twice). From the mixer, if I turn off wav and turn on cd digital there is no sound when playing a cd. I have spdif pass through disabled.
    The CD player is working, I hooked up a scope to the 2 wires and there is a signal when music exists and none when paused.
    Is this an issue with the drivers on XP64 or is there a defect somewhere else?
    Thanks for your help

    tomb8,
    Ahhh, you also have to go into the device manager and disable the "Digital CD Playback" under the properties of the CD/DVD dri've before it will output to the analog / digital connections on the back of the dri've.
    All audio from DVD's is done as data. It would never touch that cable regardless. The cable is only used for CD Audio playback when digital extraction is disabled on the dri've.
    DVD's have the audio compressed into the MPEG2 format and your DVD playing software handles the audio through to the soundcard. DD decoding is handled by either the DVD playing software or by the soundcard and only the final output is converted to analog (or the DD signal is sent straight to s/pdif out if so configured)
    Daniel

  • Digital  sound on imac?

    Can the imac G5 provide digital sound output?

    Smacker,
    Yes, your audio out (or headphone plug) can handle both stereo and digital outputs, all you need the proper optical jack for your digital connection.
    You will need a something like this for your line out cable:
    http://www.griffintechnology.com/products/xpress/
    Hope this helps.

  • Digital sound output only after using Headphones

    i used my MacbookPro 17 2.66
    with headphones to listen to music and after i removed headphones there is a red light in the headphone port and only digital sound output option in system preferences control panel
    If i reinsert headphones, headphone output reappears
    Where are my internal speaker option gone
    i have a time machine backup
    Can i just replace sound preferences
    Thanks

    Generally that means your headphones' plug is not exactly to dimensional stands and has jammed the internal connector in the jack to the "mute" position. The plug's tip-to-shoulder distance seems to be the variable.
    I've found with my MBP that, with non-standard plugs, inserting them only until they function--not until the "stop shoulder" hits the MBP case--prevents this. I have an old and cheap set of external speakers whose plug works perfectly. A patch cable I use to connect to my desktop sound system has a non-standard plug, and I have to leave the plug slightly out of the jack to prevent the problem you see. Again, insert until you hear proper sound to the device, not by feel. I've no problems with the plugs falling out using this technique.
    The "official" fix is a new logic board but most people are able to free the internal contact by inserting a plus into the jack and gently wiggling it in the horizontal plane. One person recently said he freed his with a wooden toothpick.
    If you use anything other than a standard plug to manipulate the jack, be certain it's non-conductive. BTW, if you use the "Search Discussion" option in the upper right of this page and search for "red light" (use the quotes) you will see a number of threads here on the subject.

  • No digital sound through digital-out coxial

    Hello,
    first my config :
    msi kt3ultra-ARU
    Athlon XP1800+
    1x256mb DDR RAM
    2x80GB IBM Raid 0 (great performance !!!)
    1x40 GB IBM HDD
    1x LG CD-Writer
    1x TEAC 32x CD-ROM
    no my problem :
    i connected my yamaha sorround receiver through the digital out of the s-bracket with an coxial cabel but i only get the windows sound that click clack sound but no digital sound like dts or 5.1 when i play vob-files with defenitly have digital sound. it all worked fine but i reinstalled w2k and no i only get the system-sound.
    i installed the latest ac97 drivers from msi but nothing helped.

    Hi,
    Can you describe what did you do "before" and "after" the problem occured? Sounded like
    before - no Yamaha speakers, no Win2k reinstallation
    after - Win2k reinstallation, with Yamaha speakers
    Or before and after (win2k installation) you have tested your Yamaha speakers and it worked?
    What if you use analog output, does it sound?
    If analog sound, then probably you have to check the AC'97 and Volume settings, such as to enable Digital-output etc.

  • No Digital Sound, with X_FI Fata1ity Card. HELP

    I haveing a heck of a time getting digital sound from vista, I have my speakers pkluged into the flex jack, but can't seem to find where do set the digital sound option within vista, using creative audio console, have spdif set to default and 48, have the speakers set in the sound option in control panel undwr custom to enable Digital I/O, is this right, as I have speakers and SPDIF both listed under sound in the control panel, and yes it does work with analog from the card. Help PleaseMessage Edited by Stedmister on 05-02-200703:2 PM

    Try this
    http://forums.creative.com/creativel...query.id=34898

  • Snow Leopard's digital sound is a giant step backwards

    I have a Mac Pro connected to a Pioneer receiver using an optical cable. When I was running system 10.5 my DVD's would play in DVD player with 5.1 digital sound ( I have a surround sound system connected for the sound). With Snow Leopard all the DVD player application outputs is Dolby Pro logic. A big difference in sound. If I boot up in Windows Vista using Boot Camp and play the same DVD I get 5.1 digital sound. Something seems to be wrong in OSX 10.6. I am going to go back to 10.5 until Apple gets this sound thing fixed unless someone here can tell me how to get the 5.1 digital sound to work in 10.6. This is a huge let down for me, and it would seem to me to be a giant step backwards for the operating system.

    HI,
    This would make a good feedback topic for Apple.
    http://www.apple.com/feedback/macosx.html
    Note, they read feedback but do not respond. But since this worked in 10.5 then hopefully that will be taken into consideration. Audio is important!
    Carolyn

  • PCI Sound Blaster X-Fi Xtreme Audio Get No Digital Sound Out to my Surround Reciev

    I have read almost everything but CANT FIGURE THIS OUT, PLEASE HELP ME OUT HERE :-)
    My PCI Sound Blaster X-Fi Xtreme Audio is conected to my Sony DTS/DD Reci'ver using a Mini Jack to Toslink cabel connected in the blue Digital Out minijack on the sound card and to my Optical?Toslink input on my reciever.
    I have enabled SPDIF out / Digital Output Only
    I have tried whit and whitout the Bit-Matched
    I have treied the different sampling rates 44, - 96 KHz
    I have tried playing from MS Media Player and DivX player. (dvd, mp3, radio li've, nett tv)
    Im using Vistax32
    I believe i have the correct settings and the correct cabel, but cant get no digital sound out, whats wrong?
    First I tought I neede the Digital I/O module from Creativ, but I have read that this is?NOT necessary.
    PLEASE ANY THING THAT CAN HELP ME SOLVE THIS WOULD MAKE ME REALLY HAPPY :-)

    YOU DONT NEED THE I/O accesory, or rather it is not essential. (unless your reciever only has digital optical(toslink) in?My experiment worked! alss ya need to connect from the sound cards digital out to your recievers coax digital audio?in is: "mono" mini (/8 inch) male to rca style male coax cable. you may have to choose digital only and somy other tricks from a given creative software(?they vary)?and or select the correct input for a given reciever....my Harman Kardon avr 00?and avr 300 series?are particularly tricky. Got pandora one up and running. Devo sounds good!
    Movies tonight via Netflix streaming.....YAY!

  • Digital sound output from G3 700mhz

    Can I output digital sound from my ibook G3 700mhz to my Nad Digital amp, which can input using either optical cable or single digital phono cable?
    If so which cable should I use and where can I get one from. Many Thanks Alex2001

    Not directly, no, since your iBook doesn't have a digital output, only a stereo analog output. There are external USB and Firewire audio output devices that would provide a digital output, but I can't make a specific recommendation. Perhaps if you ask in the iBook G3 area, someone can make a suggestion.

  • Does iPhone 5 support digital sound? (to slink)

    Does iPhone 5 support digital sound? (to slink)
    Is there any information about accecories for this?

    Cambridge Audio offers an iPhone dock with a TOSlink output:
    http://www.cambridgeaudio.com/products/id100-digital-dock-for-ipad-iphone
    They don't say whether it supports the iPhone 5, but you can ask. Streaming through an AirPort Express may work as well and would definitely be less expensive, though.
    Regards.

  • Digital sound output

    I just bought a HP Pavilion dv7-1040ew, mainly because of the blu-ray.
    But how do I get digital sound out to my amplifier. No use of blu-ray if i don't have DD.

    There is only hdmi out and I don't have that on my amp. Please help.
    Do I need to buy a extern soundcard? Or is there a cheaper way? 

  • Digital Sound Recordings

    I am wanting to purchase a digital sound recorder. I want to download onto the Mac. I would appreciate any advice as to what type/model to consider. I have noticed that some of the recorders use WMA, would I have any problem downloading this to the Mac?
    Yorvik

    A forum focusing on compatibility issues between Mac OS and Windows, may not be the best place to post your question. If you're looking to use it with OS X, then the OS X discussions would probably yield a greater amount of users who have experience with what you're looking for:
    http://discussions.apple.com/category.jspa?categoryID=160

  • Digital sound coming in sket

    I had a DTT 3500 paired up with a Sound Blaster Li've Platinum on a Windows ME system and it worked fine. I upgraded the system to Windows XP and the dolby digital light woudn't come on when i played dvd's
    I now have the same speakers on a differn't computer, this computer has a Sounb Blaster Li've Platinum (5.) card. It also runs on windows XP, and when i play dvd's without spdif, the sound comes on just fine, i can even select dolby pro logic and it works fine. However when i select SPDIF, for digital sound, the dolby digital light on DTT 3500 receiver blinks on and off in coordination to the sound coming on and off. The sound skips on and off very rapdily. This means it's definetly decoding the digital signal and its coming through, i can't understand why it skips rapidly.
    Any solution to this or anyone experience this before ?

    I'm having the same problem! I posted here:
    http://forums.creative.com/creativel...ssage.id=78548
    but nobody's responded to me yet either.
    Message Edited by MrHPotter on 0-7-2006 09:06 PM

Maybe you are looking for