"Digital Still Camera" not installing in XP Pro (IPhone 4 Os 4.2)

Help, all posts seem to be getting ignored in Apple regarding XP Pro.

michaelpark wrote:
Thanks. When I attach the IPhone 4 to my desktop, XP Pro lower right hand corner pops up "Found IPhone" and then "Found Digital Still Camera", after that a Found New Hardware wizard opens and I'm not able to move past as none of the options work including things on Apple website with the driver, etc., then lower right corner, "not installed and may not work correctly". It does charge and works with ITunes. In a Windows 7 laptop, no problem, a window opens and asks about importing pictures, etc. and it all works.
If I understand correctly, it shows up as a digital camera but does not show up in iTunes. You get an error message installing the driver, which may be only a warning; it might work anyway. I assume you have iTunes 10.1 installed and that your account has Administrator privileges.
Open the Task Manager first; click on the Processes tab, then the Image Name column heading to sort it. Look for AppleMobileDeviceService.exe. If you do not see it you have found the problem. Launch the Service Manager (in Control Panel, Administrative Tools), find the service, right click it and choose Start. This should fix the problem.
If the service was running or you get an error starting it you need to completely remove iTunes, download a fresh copy, and reinstall it. See: http://support.apple.com/kb/HT1925
Other possible causes include using a hub rather than a direct connection to a USB port on the computer, a firewall or antivirus that is blocking the connection, or a defective USB port.

Similar Messages

Iphone 5- Won't show up in itunes. Error message " Device drivr software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed. Digital Still Camera- Failed" HELP!

Error message " Device driver software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed. Digital Still Camera- Failed" HELP!

Hi, I was able to reformat my iPod and that worked. I read it on one of the threads and I am copy pasting the method below:
I opened the "My Computer" window and right-clicked on my ipod, and then selected "Format". I select "Yes" to format since I don't have anything on the nano to delete anymore.
I then Eject my nano from the computer and did a restart while the nano is disconnected from the computer.
Once Windows finish loading I reconnect the USB to the nano(back of computer) which automatically pulls up iTune. It asked me to name the new ipod detected and created a playlist for that specific ipod name.
Pasted from <http://discussions.apple.com/thread.jspa?threadID=1050784&tstart=15>
Thanks!

I am trying to get ios 4.3 softeware update for iPad1. When I plug in my iPad to my PC, mu PC tinks that it is a digital Still Camera and will not go any further.

I am trying to get ios 4.3 software update for my iPad 1. Have downlosded Itunes and apple softwareupdates to my PC, but when I plug in my iPad the computer thinks it is a digital still camera. how do I get my PC to reconize that it is an iPad

Must point out that this is the first time I have ever tryed to update my iPad, other than when I got it started at the store where I abought it.
This is what is happening to me. the PC is on and I have3 the Itunes on the screen but as soon as I plug in my iPad my PC seems to think that it is a digital still camera and emediatly starts suting down as it seems to think the iPad(digital camera) is going to harm my PC. PC will not go anyfurther than a warning screen and I have to then shut it down unplug the iPad and start again. HELP please

IPad Photo Transfer: Windows Vista Digital Still Camera Driver Failed

Hi,
I am trying to transfer photos from my iPad to my laptop. When I plug it in to the laptop the Apple Mobile Device USB Driver installs successfully and the Digital Still Camera driver fails. I have previously transferred photos in this way without any problem. When I plug the iPad in to the laptop it does not show up in 'my computer', the iPad is on and the screen is unlocked. Autoplay is on but no menu appears to transfer the photos. The photos I want to transfer have been taken on the iPad. It shows up in iTunes as normal. I can transfer photos from my iPhone to the laptop without a problem.
This is what I've tried:
- uninstall iTunes and reinstall
- restart the computer
- turn iPad on and off
- uninstall and reinstall apple device driver (even though it was up to date and said to be working as usual)
- plugged it in to an old laptop (windows xp) and it worked as expected
- checked for usbappl.syn in C:\Windows\system32\drivers and it is present
- uninstalled all Apple content from my laptop and reinstalled it all again
- repaired the Apple Mobile Device Support program
Any help would be much appreciated, it is driving me crazy!

Hi
I've had similar problem with my Iphone 8gb 1.1.2 OTB and Windows Vista right from when i purchased it. I tried calling Apple support and tried out all the things that you've done so far and got fed up with it. Now I download my pictures using a third party software called TouchCopy. Apple was not able to identify the issue but it certainly an issue with the OS and not the Iphone. It works like a breeze with my Windows XP PC at home but my laptop doesn't recognize it and it just gives "device installation failed". But curiously for sometime like 15 days ago, the device driver got installed but still I didn't get the camera icon in MY Computer... So if somebody could help... great!!!
And Hail Vista because I've had several driver issues like these and my antivirus is OneCare so I don't think Microsoft could complain about my installations.
Cheers
Andrew Sam

Digital Still Camera message

Hi,
When I connect my iPod Touch to my PC (Windows XP) my system recognises it as a Digital Still Camera then the computer shuts down. I have attached my old iPod Nano and this is recognised correctly indicating it is not the computer. This problem started when I updated to the latest version of iTunes. I have un-installed and re-installed iTunes. Can someone give me guidance on what to do to resolve this issue please.
Thanks
Pete

I'm not sure why the computer would shut down, but usually the reason that iTunes thinks an iPod Touch is a camera is because you have pictures on it that were taken as screenshots by the Touch or by one of the Apps on the Touch.
On the Touch, look in Photos. Is there a heading called *saved photos?* If so, that's a picture taken on the Touch and until it's removed from the *saved photos* camera roll on the Touch, you'll continue to see the camera message when you connect the Touch to iTunes.
Follow the prompts and copy the photos to your computer _and then_ make sure you remove them from the *saved photos* of the Touch.
Phil
Message was edited by: the fiend

Syncing Trouble - "Digital Still Camera"

For months now I've not been able to sync the pictures from my iphone back to my computer. Whenever I plugged it into the USB port I got a dialogue asking to install the "Digital Still Camera" and never being able to find a driver. Looking on the web lots of people seem to report this problem and seem to isolate it to a driver called usbaapl.sys, however I have discovered this is not the rogue driver.
If you are getting the "Digital Still Camera" problem then you are missing a driver from the /Windows/System32 directory called ptpusb.sys, which has a sister file called ptpusd.sys.
In my case the ptpusB.sys file was missing but either or both could be missing from your computer. Simply copy them from a machine that syncs correctly to your /windows/system32 folder and plug in your iphone. All should work again!
Posted for information.

I have been having the same problem of not being able to access the digital camera on the Iphone for several months as well. In windows the driver would not be installed and could not be found anywhere. I reinstalled itunes, reapplied XP SP3, and called apple technical support to no avail. Everything worked fine on other computers. I finally corrected this issue by copying several files from a working computer to my main computer. the files are:
c:\windows\system32\drivers\usbscan.sys
c:\windows\system32\ptpusb.dll
c:\windows\system32\ptpusd.dll
c:\windows\inf\ptpusb.inf
I then registered the ptpusb.dll file opening a command prompt and navigating to the c:\windows\system32 directory. The command I used to register the file was:
regsrv32 ptpusb.dll
I then right clicked on the ptpusb.inf file and clicked Install. I am not positive that you have to register the dll with windows since you are installing it, but that is what I did and it worked so I included it. That is pretty much it. I plugged the phone into a different USB slot and in windows found the correct driver and installed the phone. You might have to go into device manager and uninstall the current driver for windows to recognize the phone as a camera and for god sakes if you have a passcode on your phone unlock the phone. Now if I could only figure out what caused these files to disappear in the first place. I hope this helps someone.

PC shuts off when Ipod Touch is connected. Detects "Digital Still Camera"

My Ipod Touch was working fine until today. I plugged it into my PC and then it detects it as a "digital still camera". Then after a few seconds my PC will completely shut down.
The weird thing is that once it restarts with the Ipod connected already it will detect it as an Ipod and Itunes will open and everything normally. If I then disconnect it and connect it again, it will be detected as a camera again and again shut down.
I've looked all over the inter for solutions. Most of them involve updating the driver. But I cannot update the driver unless the device is connected. And when the device is connected as a "digital still camera" it will shut down my computer.
I tried booting in safe mode and then connecting the Ipod Touch and it worked fine. It detected it as an Ipod and everything worked fine. My plan was to boot in safe mode and then update the driver but I couldn't because it detected it normally.
I would normally try turning off some services to see if something it bothering it but I don't want to ruin my computer by consistently shutting it down unexpectingly and giving me errors each time it reboots.
I've seen other people online with this problem but none with a solution. I would really appreciate some help. Thank you

Mine is doing the same thing,I got it 2 days ago worked fine but today everytime i plug in the desk top it will shut it down. I plug it to my lap top it worked but i'm affraid that it will do the same thing again after a while. I have a feeling that there is some problem with itunes, if my computer is the problem why did it work fine at the begining.When I uninstalled the itunes and plug the ipod it starts charging but the computer did not shut down. I did some research and it seems that a lot of people having the same problem.

Whenever I connect my iphone 4 to my lap top i get a message saying digital still camera and the my laptop crashes, it is really frustrating, please help

Whenever I connect my iphone 4 to my lap top i get a message saying digital still camera and the my laptop crashes, it is really frustrating, please help

Reinstall iTunes. Make sure you follow the instructions in this support document to the letter. http://support.apple.com/kb/HT1923.
You may have some problems because Apple has not certified that everything works with Windows 8 yet.

LabVIEW toolkit for digital still camera - PTP protocol based

Dear List,
Just to let you know that a LabVIeW toolkit for PTP
(picture transfer protocol)camera is available. PTP is
the new standard for still imaging devices such as
still camera and scanner, it does not require camera
vendor extra special drivers (unlike Twain)and it's OS
independant, thus being supported widely in modern
high resolution digital still cameras. Interested
people can check out this link:
http://www.hytekautomation.com/Products/PTPCam.html
Irene
=====
Irene He
[email protected]
www.hytekautomation.com
www.geocities.com/irene_he

Hello rbergs,
I apologize for just now responding to your post below but I would like to redirect you to a different resource that will be able to provide the necessary support for using the LabVIEW Interface for Arduino toolkit. Currently, this toolkit is only supported by posts on ni.com/arduino forum. If you have any additional questions regarding the LabVIEW environment specifically, please feel free to post any additional questions in this discussion forum.
Wes W
Application Engineering
National Instruments
www.ni.com/support

Digital Still Camera/ Non working apps

First when I try downloading apps on my 2nd gen ipod they don't download. This is on multiple apps(wifinder,myspace,etc). It works fine on my other friends itouch's(same gen and everything). Then not on mine. Also when I plug up my ipod with the latest software and it comes up as digital still camera. So if you would please help,thanks.

for some reason things downloaded directly to the iPod touch, while appearing to go through the full download process, they don't appear on the iPod. it's the same with podcasts. sometimes the only way to do it is by downloading them in iTunes and then synching them.
compters also sometimes seem to recognise the ipod touch as a digital still camera, its something to do with the fact that, unlike other ipods, the touch and iphone can't be used as external hard drives. it should still come up fine in iTunes though.

ITunes 11.2.2 for Windows x64 will not successfully install. Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2. Any Thoughts?

iTunes 11.2.2 for Windows x64 will not successfully install. Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2. Any Thoughts?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component won't install normally.
If needs be, the Microsoft Program Install and Uninstall Utility (MS Installer "Fixit") may be able to help force through the installation.
tt2

I can not install windows 8 pro on my mac , the disc don't allowed be partition

I can not install windows 8 pro because of the hard-disc dont allowed to partition , I used the bootcamp but always the fault pop coming up .

Hi there soranfromorebro,
I would recommend taking a look at the article below.
Boot Camp: "We couldn't create a new partition or locate an existing one" alert during Windows 8 install
http://support.apple.com/kb/ts4560
-Griff W.

Hi, I can't install Apps in my ipod touch, because it needs to authorize my computer, but when I authorize still can not install Apps.

Hi, I can't install Apps in my ipod touch, because it needs to authorize my computer, but when I authorize still can not install Apps. this message appears :

except the first one :
Authorize your purchases from an administrator account

Camera Raw 6.1 "STILL WILL NOT INSTALL" this sucks!!

I recently had someone from [email protected] tell me to uninstall my one of my adobe products and then reinstall it. Which ever product had the least memory?
I replied and go ZELCH response.
Yet Adobe wants me to fill out a survey on how they did----*&&&(((&%**
PLEASE!---GIVE BETTER SUPPORT !!!!!!!
Camera Raw will still not install, I purchased hard copies from the Adobe store, I DID NOT DOWNLOAD it from this &%%**&# adobe site.
Why isn't Adobe listening???
Is anyone out there that HAS BEEN ABLE TO DOWNLOAD THE NEW CAMERA RAW 6 ???
If so can you tell me how to make it work??
Sorry not yelling Camera Raw Forum, just hoping ADOBE IS LISTENING, OR READING THIS THREAD !!

I have tried repairing I tunes first before doing the update and also tried unchecking ICloud and Safari to let I tunes update alone but still does not work...even tried to update ICloud and Safari by themselve's and those will not update either...
It's sounding a bit like a problem with your Apple Software Update.
Restart the PC. Now go into your Uninstall a program control panel. Can you see Apple Software Update in the list of programs? If so, select Apple Software Update and click "Repair".
If the repair goes through okay, can you get the updates to go through properly now?

MPEG 2 component not installed in Quicktime Pro

My first symptom is: I try to extract a file from a DVD using MPEG Streamclip, and I get a message that says MPEG 2 is not installed in my computer.
But I have Quicktime Pro, Final Cut Pro and Compressor installed in my computer. I have checked the Quicktime folder in the library and the component is there. But when I try to export a file as a MPEG 2 movie either from inside Final Cut using the Quicktime Conversion option or from Quicktime itself, I do not see the MPEG 2 option! Why is this???
Help please!
PS: My DVDs are not protected, they are of my own work!

What I really wanted to do was: import my own videos from DVDs I made, add them to a DVD Sudio Pro project of my work (my digital portfolio) and then burn this project back to DVD - encoding them back to DVD. It was my understanding that in order to work with them in DVD SP, they had to be either .mov or mpeg2.
DVDSP normally expects a conversion compatible QT compression format or MPEG-2 "elementary stream" (i.e. M2V video file referencing a separate AIFF audio file or paired M2V and AC3) files.
Any idea how to fix this?
You may have run up against an upgrade incompatibility. I used to use FCP v4.5 with the then contemporary versions of Compressor and DVDSP. As soon as i upgraded to leopard, my MPEG-2 encoder, Compressor, and DVDSP either failed to work at all or only partially functioned. As I always keep an earlier OS handy on one or more hard drives, I quickly learned these applications still worked when I booted up using Tiger. For several months I continued to work by reverting to Tiger when needing to use the affected applications. In April, I finally "bit the bullet" and purchased a used copy of FCS2 over the Internet. Now everything (except my old MPEG-2 encoder component) works under Leopard. Not sure if this may be the basis for your problems but if you can boot up in Tiger and re-initialize the problem applications, then you can easily test whether or not an OS incompatibility is the root of your problems here.

"Digital Still Camera" not installing in XP Pro (IPhone 4 Os 4.2)

Similar Messages

Maybe you are looking for