Digital trigger mac OSX

Hi everybody
I am running a machine mac OSX snow leopard with Labview 2011. The acquisition card is a PCIe-6259 with a connection box SCB-68. I would like to perform the acquisition of an analog signal according to a digital trigger (PFI0 or PFI1). I have created this simple VI that unfortunately does not work on my machine. The VI exits immeditely without doing anything and I do not have even an error. If I switch to analog trigger it works nicely but it is slower than I need. If I run the same VI on a windows machine it works fine. What am I doing wrong?
Thank you very much for all the tips
antonio
Attachments:
Trigger_acquisition_test2.vi ‏23 KB

I do not have any hardware so I cannot test. Try putting an error indicator (or probe) on the error wire coming from the Start Trigger VI to be sure that you are not getting an error. I keep automatic error handling turned off, so I am not sure, but I think that wiring the error out terminals changes the way it works. Put an error indicator at the end of the chain also.
Lynn

Similar Messages

Hallo ,why is it that when I delete a photo ,which is backed up by time machine and western digital external hard drive , that I am able to restore the photo okay but not the titles and descriptions . I have a Macbook 4.1, mac osx 10.5.8 . Iphoto 7.1.5 ,

QUESTION.
Hallo , my question is ;whenever I delete a photo and restore it through Time machine and Western digital external hard drive , I am able to restore the photo but not the titles and descriptions . Western Digital inform me that it isn't their external hard drive problem and suggest that it is an Apple software problem ?
I am using a Macbook 4.1 , with Mac OSX 10.5.8 . I photo 7.1.5 , last modifie4d 01/05/2010 -universal . Should I be upgrading Iphoto ?
I hope that someone is able to help in this matter , as i have to restore 12000 photos !
Thanking you in anticipation.
Alan from Wigton

Hallo Kieth ,
I am not quite ready to restore the full iphoto library , as I have days of work re - imputting titles,descriptions and enhancement . I hope that your suggestion works , as I use my Macbook basically to work with digital photography. Through time , I will need to delete my library to recover more disc space and I would hate to have to spend more time re - imputting titles and descriptions all over again .
Thanks for your interest and advice.
regards - Alan

Problem installing Mac OSX on my new MacBook hard drive...

Hi,
i am beside myself again...(i just visited my local Genius bar this afternoon). Any help would be most appreciated! :o)
i purchased a 2.5 inch SATA Fujitsu 120GB laptop hard drive for my new MacBook. Followed the awesome* instructions on "how to replace/upgrade hard drive", and took out the original Toshiba HD. What the instructions* failed to mention was that i would eventually need to use a Torx screwdriver (star-shaped) to remove the caddy/carriage from the Toshiba HD. Got that the next day and replaced the Toshiba 80GB with my new 120GB Fujitsu drive..., it slipped into place nicely but i did notice that the Toshiba had four short wires protruding out to the right of the contacts, which my new Fujitsu didn't have... hmmmm...?!
anyways, tried to install Mac OSX on the new drive, booted up with the install disc... went thru' chosing the language (English), agreed to the second step... but when it came time to install, there was NO icon at all in the box where i am asked where i want to install it!!!
so i go to disk utilities, and see that my Fujitsu HD is indeed recognized, but none of the buttons in first aid are active... so i can't check it.
i figured that had to do with the four little wires, so i replaced the original Toshiba and made a reservation with Genius Bar to ask for assistance.
this afternoon, i explained my problem and was told the four wires have NOTHING to do with it... Lawrence (the genius) told me to (actually, first he said Apple does not recommend my doing this... and that i should go to a 3rd party computer store such as Dino to get help!) go back to disk utilities and partition, then erase this drive and then i will see the icon for this drive in the install box.
Well i did everything i was told to do and... still, there is no icon for my Fujitsu HD! :o(
I was able to partition, after which there was a disc0 under the Fujitsu drive on the left side of the disk utilities. When i go to system profiler, and click on ATA... it too shows the Fujitsu drive... but i cannot install because there is NOTHING to click on at the installation step! the "continue" button is not active and only the "back" button is actively mocking me!!!
i know many of you have successfully upgraded your hard drive... what am i doing wrong? Would a different brand work better? I know Seagate is quite popular, and OWC sells a Western Digital version as well as a Hitachi... do those four little wires make a difference? Would the Seagate come with those wires???
i am going crazy... thanks, and sorry for the long post, just wanted to let you know what i've done!
blue skies,
ps. please feel free to email me at [email protected] if you think that would be better! :o)

Hi,
...after getting back from school, my MacBook was STILL in the process of verifying and "supposedly" repairing... since i was gone for over 10 hours, i finally assumed the drive was either defective or just incompatible, and quit disk utility.
...this morning i went out and bought a new Seagate 120GB SATA (they didn't have 160GB SATA drives, only 160GB ultra-ATA drives) 2.5 inch HD. This one DID have those four wires to the right of the contacts... (i don't know how important they are), and after changing and exchanging the Toshiba/Fujitsu HDs, it was a breeze putting in the new Seagate drive.
Erased > patritioned > and sure enough, the icon showed up and the biggest smile showed up on my face as i finished installing! :o)
I contacted the original seller of my fujitsu hd (it was a 2.5 inch, 120GB, serial ATA notebook drive) and he was kind enough to say "just pack it up and send it back for a refund!" (minus shipping and re-stocking fees of course! :o)
Just wanted to mention that, the fujitsu hd WAS recognized by disk-utility and at the bottom left of the window it said that the fujitsu was "GUID partitioned"..., so i am still scratching my head as to why it didn't work?!
I want to thank everyone that offered advice, it was helpful and i feel more comfortable with my MacBook after this trying and very frustrating episode! :o)
blue skies,

I am using a 2003 eMac and am running on Mac OSX vs 10.4.11. iTunes is not recognizing music I have purchased and when I try to connect when it request me to I get the following error message: Cannot complete i Tunes Store request. A required iTunes com

I am using a 2003 eMac and am running on Mac OSX vs 10.4.11. I amrunning iTunes 8.2.1 (6) and not able to upgrade iTunes on this computer. iTunes is not recognizing music I have purchased and when I try to connect when it request me to I get the following error message:
Cannot complete iTunes Store request. A required iTunes component is not installed (-42404)
Please help.

Is this music purchased back in DRM days? I don't actually have any iTunes music so I can't test with my iTunes 7.5, but I know that without iTunes 10 you cannot even connect to the store anymore. I wouldn't think that would require an active connection to the store all the time, otherwise how could you play music on a computer in the middle of nowhere? Did you do something to trigger iTunes suddenly wanting to connect and check on machine authorization?

Fireworks CS4 in Mac OSX 10.5.8 nearly unusable

I am a Digital Media Tutor and have been using Fireworks in our curriculum for the past two years.
CS3 had some bugs and would crash occasionally but generally was a good tool for interactive prototyping.
We use the iMac with 4 GB Ram the latest Updates and Mac OSX 10.5.8
Ever since the CS4 version came out the bugs are so bad and so numerous and random that I couldn't even run through a lecture / walkthrough.
So I have now been forced to remove it from the curriculum altogether.
Its a real shame that Adobe has not been able to fix it.
Here are a few that I encountered in my class in just one hour:
Attempting to highlight a word in text to change its color (crash) over and over had to edit in Illustrator.
Aligning text (disappears) still in layer but gone forever
Copying and pasting graphics from one layer to the next (image appears but is unselectable and has no layer)
Changing a regular layer's order (error saying can't adjust master page layer)
No behaviors showing up in the window on Navbar slices forecd to reboot to edit them.
Degrading performance over time and slow response of UI sometimes up to 30 seconds until eventually crashing (assumed memory leak)
Adobe please put some resources into making this software usable and focus on what you have before jumping to CS5.

This is a user-to-user forum. If you want to reach Adobe, you need to contact them directly.
Try the Contact Us or Submit Feedback links at the bottom of the page.

Free filter or/ plug-in set? for "OIL PAINT" - to download & add to Photoshop CS 5 (Mac OSX 10.8) ?

I have the CS 5 Suite instaled on 2 of my Macs (per Adobe licensing). I upgraded (aftwrward, in 2012) just the Photoshop CS 5 app to Photoshop CS 6. There is a GREAT filter [then new] with PS CS 6 called "Oil Paint". I hope to be able to find out from anyone if there a free and compatible: filter, filter set, or plug-in(s) set, so I can add the filter "OIL PAINT" - to download & add to Photoshop CS 5 (Mac OSX 10.8) ?
Many thanks.
mdgiamo
USA
PS - I downloaded Pixel Bender - but that does not seem to provide what I am looking for..! In fact - after I installed it - it is NOT embedded in Photoshop CS 5, contrary to Adobe's claim that once you install it - it will be there in CS 5. Pixel Bender opens separately; and looks to be [only] a-user-definable add-on for PS CS 5+ [and done via custom user progamming changes - which on first glance did NOT seem easy to figure out. And I AM a programmer, beside being a highly creative person (for decades), and with all forms of digital media).

Please advise: I have the [circa 2010] 64-bit v.CS 5 Photoshop (et.al) - that has been updated by Adobe a few times, by my choice- or by their automatic update method (which I try NOT to utilize, automatically: I like to know what it is that is being installed BEFOEit happens. Think the now unstoppable Google Chrome v32 for Macs. Unbelievable gall from Google; and it breaks anything that is supposed to run /stream from the web in Apple Inc's QUICKTIME). Anyway: When I clicked on your provided link (above), it brought meto the PIXEL BENDER page, including numerous archived PLUG-IN downloads; Neither of the URIs (for a plug-in that enables OIL PAINT filter in PS CS 5) - for any of the offered 64-bit Mac OXS plug-ins /downloads. Nothing happens. Can you please explain more; or perhaps what it is I am doing wrong? NOTE: I did not "sign in" at the time, to the Adobe site with my Adobe account ID /pwd; but then - I did not think I HAVE to sign in download a freely available plug-in.
Thanks very much.
MDGiamo

Why can't i access Pages on my mac osx Maverics version 10.9.5. Do i need to upgrade to Yosemite?

Why can't i access Pages on my mac osx Maverics version 10.9.5. Do i need to upgrade to Yosemite? I was using it yesterday just fine.

Go step by step and test.
1. System Preference > Sound > Output > Internal Speakers
    Highlight Internal Speakers / Headphones
    Make sure that Mute is not enabled.
2.Plug in and remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
    Try this even if you don’t see the red light.
3. Reset PRAM. http://support.apple.com/kb/PH14222
    Do this twice
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the appropriate method.
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
     Make sure that no box is checked under “Mute”.

I believe that i have malware on my mac, osx 10.9.4. accordingly, i've tried to run clamxav (on my mac HD) but just get a spinning wheel, then have to shut down. any advice on how to stop spinning wheel or get rid of malware? please help. :-).

i believe that i have malware (possible highjack of safari browser) on my mac, osx 10.9.4. accordingly, i've tried to run clamxav (on my mac HD) but just get a spinning wheel, then have to shut down. any advice on how to stop spinning wheel or get rid of malware? i have symnatic endpoint and, after scanning, it reveals nothing. please help. :-).

are locked user files or that have incorrect permission a bad thing?
Yes.
why am i removing symantec?
Short answer: Because it's worse than useless and worse than the imaginary "viruses" you're afraid of would be if they really existed. For the long answer, see below.
1. This is a comment on what you should—and should not—do to protect yourself from malicious software ("malware") that circulates on the Internet and gets onto a computer as an unintended consequence of the user's actions. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the computer, or who has been able to log in to it remotely. That threat is in a different category, and there's no easy way to defend against it.
The comment is long because the issue is complex. The key points are in sections 5, 6, and 10.
OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user. Internally Apple calls it "XProtect."
The malware recognition database used by XProtect is automatically updated; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
☞ It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
☞ It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
As new versions of OS X are released, it's not clear whether Apple will indefinitely continue to maintain the XProtect database of older versions such as 10.6. The security of obsolete system versions may eventually be degraded. Security updates to the code of obsolete systems will stop being released at some point, and that may leave them open to other kinds of attack besides malware.
3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't necessarily been tested by Apple, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
☞ It can easily be disabled or overridden by the user.
☞ A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
☞ An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
Apple has so far failed to revoke the codesigning certificates of some known abusers, thereby diluting the value of Gatekeeper and the Developer ID program. These failures don't involve App Store products, however.
For the reasons given, App Store products, and—to a lesser extent—other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. Sandbox security is based on user input. Never click through any request for authorization without thinking.
4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is effective against known threats, but not against unknown ones. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
5. The built-in security features of OS X reduce the risk of malware attack, but they are not, and never will be, complete protection. Malware is a problem of human behavior, and a technological fix is not going to solve it. Trusting software to protect you will only make you more vulnerable.
The best defense is always going to be your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "Trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and the scam artists. If you're smarter than they think you are, you'll win. That means, in practice, that you always stay within a safe harbor of computing practices. How do you know when you're leaving the safe harbor? Below are some warning signs of danger.
Software from an untrustworthy source
☞ Software of any kind is distributed via BitTorrent, or Usenet, or on a website that also distributes pirated music or movies.
☞ Software with a corporate brand, such as Adobe Flash Player, doesn't come directly from the developer’s website. Do not trust an alert from any website to update Flash, or your browser, or any other software.
☞ Rogue websites such as Softonic and CNET Download distribute free applications that have been packaged in a superfluous "installer."
☞ The software is advertised by means of spam or intrusive web ads. Any ad, on any site, that includes a direct link to a download should be ignored.
Software that is plainly illegal or does something illegal
☞ High-priced commercial software such as Photoshop is "cracked" or "free."
☞ An application helps you to infringe copyright, for instance by circumventing the copy protection on commercial software, or saving streamed media for reuse without permission.
Conditional or unsolicited offers from strangers
☞ A telephone caller or a web page tells you that you have a “virus” and offers to help you remove it. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
☞ A web site offers free content such as video or music, but to use it you must install a “codec,” “plug-in,” "player," "downloader," "extractor," or “certificate” that comes from that same site, or an unknown one.
☞ You win a prize in a contest you never entered.
☞ Someone on a message board such as this one is eager to help you, but only if you download an application of his choosing.
☞ A "FREE WI-FI !!!" network advertises itself in a public place such as an airport, but is not provided by the management.
☞ Anything online that you would expect to pay for is "free."
Unexpected events
☞ A file is downloaded automatically when you visit a web page, with no other action on your part. Delete any such file without opening it.
☞ You open what you think is a document and get an alert that it's "an application downloaded from the Internet." Click Cancel and delete the file. Even if you don't get the alert, you should still delete any file that isn't what you expected it to be.
☞ An application does something you don't expect, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
☞ Software is attached to email that you didn't request, even if it comes (or seems to come) from someone you trust.
I don't say that leaving the safe harbor just once will necessarily result in disaster, but making a habit of it will weaken your defenses against malware attack. Any of the above scenarios should, at the very least, make you uncomfortable.
6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it—not JavaScript—in your browsers.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the address bar with the abbreviation "https" when visiting a secure site.
Stay within the safe harbor, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself.
7. Never install any commercial "anti-virus" (AV) or "Internet security" products for the Mac, as they are all worse than useless. If you need to be able to detect Windows malware in your files, use one of the free security apps in the Mac App Store—nothing else.
Why shouldn't you use commercial AV products?
☞ To recognize malware, the software depends on a database of known threats, which is always at least a day out of date. This technique is a proven failure, as a major AV software vendor has admitted. Most attacks are "zero-day"—that is, previously unknown. Recognition-based AV does not defend against such attacks, and the enterprise IT industry is coming to the realization that traditional AV software is worthless.
☞ Its design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere. In order to meet that nonexistent threat, commercial AV software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
☞ By modifying the operating system, the software may also create weaknesses that could be exploited by malware attackers.
☞ Most importantly, a false sense of security is dangerous.
8. An AV product from the App Store, such as "ClamXav," has the same drawback as the commercial suites of being always out of date, but it does not inject low-level code into the operating system. That doesn't mean it's entirely harmless. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
An AV app is not needed, and cannot be relied upon, for protection against OS X malware. It's useful, if at all, only for detecting Windows malware, and even for that use it's not really effective, because new Windows malware is emerging much faster than OS X malware.
Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else. A malicious attachment in email is usually easy to recognize by the name alone. An actual example:
London Terror Moovie.avi [124 spaces] Checked By Norton Antivirus.exe
You don't need software to tell you that's a Windows trojan. Software may be able to tell you which trojan it is, but who cares? In practice, there's no reason to use recognition software unless an organizational policy requires it. Windows malware is so widespread that you should assume it's in everyemail attachment until proven otherwise. Nevertheless, ClamXav or a similar product from the App Store may serve a purpose if it satisfies an ill-informed network administrator who says you must run some kind of AV application. It's free and it won't handicap the system.
The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have all the disadvantages mentioned in section 7.
9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
10. As a Mac user, you don't have to live in fear that your computer may be infected every time you install software, read email, or visit a web page. But neither can you assume that you will always be safe from exploitation, no matter what you do. Navigating the Internet is like walking the streets of a big city. It's as safe or as dangerous as you choose to make it. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices.

Mac OSx/5508/3702i dropping issue

Hi all,
I have installed dozens of WLCs but with this one customer rollout I have hit an impasse. The customer has a 98% MacOS device environment running a 5508 HA pair and 3702i APs. The Mac OSx users randomly lose access even when their device sits in one place within 10 feet of a below ceiling tile hung AP. Disconnects can't be recreated as no particular behavior seems to trigger the drop. Also for some clients there is severe latency(>1000ms) just pinging the WLAN gateway. Pings from Gateway SVI to AP are fine(<5ms) Debugs imply AP is too busy to handle an authentication request even thought the AP only has 10 users and an insignificant amount of traffic flowing through it. This issue is not dedicated to just one AP either as folks all over the 30 AP environment suffer similarly. Air Magnet shows no coverage holes. Windows devices appear ok.
I am more interested if this is has happened to anyone else and if anyone has had something that has fixed this issue for them instead of troubleshooting.
TAC case has been open over 4 months with escalation and Backbone TAC involvement with no luck.
Details:
- Mac OSx versions are random and those running Yosemite do have the latest patch.
- WLC versions 7.6.120, 7.6.130, 8.0.102MR, and 8.0.110 have not corrected the problem. (although fewer errors are seen in the debugs)
- Although APs are actually local to the controller, the customer has them in Flexconnect for HA and Bandwidth reasons.
- problem happens with Band Steering and also with Dedicated 5Ghz SSID (2.4 unusable due to density of APs using 2.4 in surrounding buildings)
- Clear Air 5ghz report score above 97%
- tried Legacy Beam forming, no joy.
- EDRRM is on
- Fast Transition is on
- Fast SSID switching is on
- Problem occurs with 20 and 40 Mhz channel bonding.
- 802.11k sticky cache has been tried to no avail.
- FUS is at 1.8 (I hear FUS 1.9.0.0 not only fixes the subsystem bugs but may iron out problems with the Operation side too)
- SSID running dynamic vlan assignment from NPS Server
- 6 SSIDs total
- No DFS channels being used
- SSID timeout has been turned off
- Data rates below 9Mbit are disabled
- APs are roughly 25 feet apart.

Thanks Leo,
Problem happens to multiple versions of OSx, those running Yosemite do have the latest patch. Unfortunately I don't think disabling N is going to be feasible. Due to the High density rate there is no b/g to fallback on (2.4 Ghz is completely saturated). So that would leave users with basically just 802.11a? I do have a customer with similar set up running 5508 (v7.6.130) with 3702 in flexconnect. The difference is the1.9.0.0 FUS has been applied and they run Pre-shared key authentication. Where as the problem customer runs older FUS and Dynamic Radius based vlan assignment.

Convert Cisco WebEx .WRF and .ARF files for Mac OSX to .WMV

Since the Cisco WebEx Recording Editor doesn't appear to support Mac OSX, is there a way to convert Cisco WebEx recordings, .WRF and .ARF files, to .WMV or .SWF for a Mac OSX users?

Hi Ben,
Here is a copy/paste from the Arcsoft site:
What is a PHB file?
Question
What is a PHB file?
Answer
PHB files are proprietary album files used by some of our programs, namely PhotoBase. Albums do not store your images. They serve as links to files stored on your computer or removable drive. If you delete the original file, the thumbnail in the album basically becomes a dead link. For example, if you have files on a floppy disk and create an album, you'll always need to have that floppy in the drive whenever you want to view the full images. Likewise, if you have a digital camera that is read as a removable drive, you would need to have it connected if you create the album directly from the camera. The best thing to do is copy all of your images into a folder on your computer, then create the album referencing those files. Albums are useful because they let you preview and organize files on your system in a convenient fashion. It is also from albums that slide shows are made with some of our programs.

Mac OSX 10.6.2 messed up audio on FCP

I was just working in Final Cut Pro when a "software update" message came up. Mac OSX 10.6.2. I stopped working and updated. When I restarted and went back into FCP, my audio is ALL MESSED UP! Every clip that is played has an echo to it...the echo is slightly slower than the original audio. No matter what I do, the echo remains. I noticed that after restarting the computer after the update, my system audio settings had been messed with.
Can anyone help?

Repair Permissions after every upgrade...and
#44: FCP acting weird - Trash Prefs
Shane's Stock Answer #44: FCP acting weird or unusual. Just not like is normally should
If the program was working fine, and now isn't, or just isn't working the way it should, the first things to do are:
1) Trash your FCP preferences. Download the Preference Manager from Digital Rebellion: http://www.digitalrebellion.com/pref_man.htm
http://www.kenstone.net/fcphomepage/trashing_fcpprefs.html
2) Open the Disk Utility and Repair Permissions.
3) Shut down for 10 min. Go for a quick walk around the block and get SOME exercise today. Come back, turn on the computer and see how things are.
4) (optional) Do the Hokey Pokey and turn your self about. Results may vary.
Shane

Help! Can't start up from Mac OSX 10.0.4

I’m hoping someone can help me with a problem. I have an Apple G-4 computer. When I originally purchased it 3-4 years ago I believe it came with OS 9.1 and OSX installed. Both worked fine when I first got it. Through the years I upgraded the OS to 9.2.2 and haven’t used OSX since the first time I purchased the computer.
Well, I went out an purchased a digital camera which only works with OSX. So I switched the start up disk to OSX and re-started the computer. No OSX, only a gray screen with wording, letters and numbers that are highlighted. Some of the wording is as follows: “panic unable to find driver for this platform”, no debugger configured-dumping debug information”, panic we are hanging here”.
So I re-started from the CD, switched to OS 9.2 and restarted. I then removed the OSX system from my computer. I then re-installed OSX again and tried to start from it, but the same thing happened. I’m not sure if it has any bearing, but I noticed in the startup disk, Mac OSX 10.0.4 has next to it (Build 4Q12). Not sure what it means or if it’s suppose to be there.
Sure would appreciate some help here. Thanks much.
G-4 Mac OS X (10.0.x)

10.4 will work on your machine as long as you upgrade the firmware first.
Follow my upgrade tips when installing:
http://www.macmaps.com/upgradefaq.html
I would add the person who has the least trouble upgrading to X, goes to it cold turkey. As you are suggesting only to do so for your digital camera, I'm not sure if you really are ready to go to X. I'd get all your software upgraded to X versions before going to X purchased, and then you'll be able to work it out. I've also written this FAQ on migration:
http://www.macmaps.com/macosxnative.html
Disclaimer: Reference to links I make to my Macmaps.com website are a for your information only type reference. I do not get any profit from this page, and it is open to the public.

Have a 27 imac desktop with mac osx 10.5.8, finally got out of grey and black screens etc. is there anything I can do to prevent all this from happening again when I shut down?

Have a 27 imac desktop with mac osx 10.5.8, finally got out of grey and black screens etc. is there anything I can do to prevent all this from happening again when I shut down? Or before I shutdown? TIA.

Basic Backup
For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
1. A Time Machine preferences panel as part of System Preferences;
2. A Time Machine application located in the Applications folder. It is
     used to manage backups and to restore backups. Time Machine
     requires a backup drive that is at least twice the capacity of the
     drive being backed up.
Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
Although you can buy a complete external drive system, you can also put one together if you are so inclined. It's relatively easy and only requires a Phillips head screwdriver (typically.) You can purchase hard drives separately. This gives you an opportunity to shop for the best prices on a hard drive of your choice. Reliable brands include Seagate, Hitachi, Western Digital, Toshiba, and Fujitsu. You can find reviews and benchmarks on many drives at Storage Review.
Enclosures for FireWire and USB are readily available. You can find only FireWire enclosures, only USB enclosures, and enclosures that feature multiple ports. I would stress getting enclosures that use the Oxford chipsets especially for Firewire drives (911, 921, 922, for example.) You can find enclosures at places such as;
1. Cool Drives
2. OWC
3. WiebeTech
4. Firewire Direct
5. California Drives
6. NewEgg
All you need do is remove a case cover, mount the hard drive in the enclosure and connect the cables, then re-attach the case cover. Usually the only tool required is a small or medium Phillips screwdriver.

Time Machine Backup Includes entire HDD on Bootcamp instead of Mac OSX only

I have put in a 500 GB HDD into my MBP 2008. I want to do my Time Machine backups on a 320GB Western Digital external HDD.
I got 250GB assigned to Mac OSX/ Snow Leopard and 250 GB assigned to Win 7 - using two partitions.
When I try to do a Time Machine Backup now, it always requires 500 GB (or 460GB to be exact) for that backup - so it wants to include the Win7 partition in the backup ?
Is there any other solution than buying a new, bigger HDD to solving that problem, so that my Time Machine backup won´t be larger than 250 GB ?

simon1973 wrote:
I have put in a 500 GB HDD into my MBP 2008. I want to do my Time Machine backups on a 320GB Western Digital external HDD.
I got 250GB assigned to Mac OSX/ Snow Leopard
That 320 GB may be a bit small, depending on how much is actually on the 250 GB partition -- Time Machine usually needs 2-3 times the space of the data it's backing-up. See #1 in Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum).
When I try to do a Time Machine Backup now, it always requires 500 GB (or 460GB to be exact) for that backup - so it wants to include the Win7 partition in the backup ?
Time Machine adds about 20% to the estimated size of the backup, for workspace on the backup volume, so it's trying to back up about 380 GB.
Is there any other solution than buying a new, bigger HDD to solving that problem, so that my Time Machine backup won´t be larger than 250 GB ?
If your Windoze partitions aren't formatted HFS+ (some variant of +Mac OS Extended),+ Time Machine can't back them up.
Take a look at +Time Machine Preferences > Options.+ If the partitions aren't listed in the exclusions box, click the plus sign and select them for exclusion.
While you're there, see what's shown for +Estimated size of full backup+ just below the exclusions box.

Cannot Install Mac OSX on this Computer!! HELPPPP!

Well here is the situation. I have a PowerMac G4 (Digital Audio). i had it upgraded a year ago to a 1.53Ghz G4 Processor, 1.5 GB Ram, I have a 160GB HD, and a 40GB HD. All the firmware is up to date. i went to Install leopard and the OS didn't recognise my system configuration. i called Apple and well all i got was " That I basically made a custom PC and Leopard will not recognise the Hardware and configuration. "Cannot Install Mac OSX on this Computer" was the message I got
So I had to revert Back to Jaguar and I'm hating it. Any help on this one, or should I cut my loses and sell Leopard?

am currious too as i have a g4 dual processor 800 and am wondering if it will install on it. the dp has plenty of hp to run it. if yours is showing as a 1.5 in profiler should install. but one glitch could be many sonnet upgrades do a trade off and a faster processor but they down clock the fsb speed to get it. check and see if fsb is at least 133. i do pc service for a living and love mac for my own use but apple is a bit arrogant on it's software as to install specs and not offering a uninstaller option. on that windows is a lot more friendly and flexable.

Digital trigger mac OSX

Similar Messages

Maybe you are looking for