Digital Video Camera not showing up as device on desktop
I have a 6 year old sony digital video camera. I am able to connect via firewire and upload video using imovie without a problem. It shows up as an option in imovie as dv-vcr. However the video camera does not show up in the desktop and when it is connected I can't find it being recognized anywhere using spotlight. So I am unsure of how to disconnect it. Normally if it shows up in the desktop I would just 'eject' it by dragging to trash. But now I just turn it off and unplug it. When I do it that way the 'did not disconnect properly' message shows up and my external harddrive that is plugged into the other firewire port disappears. Any ideas on how to solve this?
Hi mpagriffin
Try this: with Finder on the menu bar go to *Finder / Finder Preferences* and select General, then check all the boxes for *Show these items on the Desktop*.
You also might check to see if it shows up and ejects in Disk Utility?
note: that some devices won't show up on the desktop, my wife's Canon will only mount in and eject from iPhoto while all of our other camera's mount on and eject from the desktop.
Dennis
Similar Messages
-
Built in camera not showing up in devices
I have installed Skype but it can not find my built in camera (when I go to select the video device it doesn't find anything). My system is a Dell Studio 1458.
uname -r -s
Linux 3.16.3-1-ARCH
I have searched and can not find anything useful. I can't even seem to locate my camera. The Arch Webcam Setup has some information but I can't even find my device listed. This webcam has worked in the past (on other operating systems) but I have never tried to get it to work on Arch until now.
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.3-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=652fafcb-9a22-4cd0-8554-460d758126cc rw
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000dffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c3a7bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c3a7c000-0x00000000c3a81fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c3a82000-0x00000000c3be9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c3bea000-0x00000000c3c0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c3c0f000-0x00000000c3c6efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c3c6f000-0x00000000c3c6ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c3c70000-0x00000000c3cf0fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c3cf1000-0x00000000c3f0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c3f0f000-0x00000000c3f16fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c3f17000-0x00000000c3f1efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c3f1f000-0x00000000c3f80fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c3f81000-0x00000000c3f9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c3f9f000-0x00000000c3fdcfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c3fdd000-0x00000000c3ffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000c3fff000-0x00000000c3ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c4000000-0x00000000c5ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c7800000-0x00000000c7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0704000-0x00000000f0704fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feaff000-0x00000000feafffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000237ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Dell Inc. Studio 1458/0133D9, BIOS A07 05/12/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x238000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C4000000 mask FFE000000 uncachable
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FF8000000 write-back
[ 0.000000] 4 base 100000000 mask F00000000 write-back
[ 0.000000] 5 base 200000000 mask FE0000000 write-back
[ 0.000000] 6 base 220000000 mask FF0000000 write-back
[ 0.000000] 7 base 230000000 mask FF8000000 write-back
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xc4000000-0xc5ffffff] usable ==> reserved
[ 0.000000] e820: update [mem 0xc8000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xc4000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f7050-0x000f705f] mapped at [ffff8800000f7050]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
[ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
[ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x237e00000-0x237ffffff]
[ 0.000000] [mem 0x237e00000-0x237ffffff] page 2M
[ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x234000000-0x237dfffff]
[ 0.000000] [mem 0x234000000-0x237dfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x233ffffff]
[ 0.000000] [mem 0x200000000-0x233ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xc3a7bfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xc39fffff] page 2M
[ 0.000000] [mem 0xc3a00000-0xc3a7bfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xc3a82000-0xc3be9fff]
[ 0.000000] [mem 0xc3a82000-0xc3be9fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xc3c0f000-0xc3c6efff]
[ 0.000000] [mem 0xc3c0f000-0xc3c6efff] page 4k
[ 0.000000] BRK [0x01b27000, 0x01b27fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xc3f0f000-0xc3f16fff]
[ 0.000000] [mem 0xc3f0f000-0xc3f16fff] page 4k
[ 0.000000] BRK [0x01b28000, 0x01b28fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xc3f1f000-0xc3f80fff]
[ 0.000000] [mem 0xc3f1f000-0xc3f80fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xc3f9f000-0xc3fdcfff]
[ 0.000000] [mem 0xc3f9f000-0xc3fdcfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xc3fff000-0xc3ffffff]
[ 0.000000] [mem 0xc3fff000-0xc3ffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x379d8000-0x37ce3fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F6F70 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x00000000C3FF14CB 000074 (v01 DELL FX09 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 0x00000000C3FE1000 0000F4 (v03 DELL M09 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 0x00000000C3FE2000 00D5F3 (v02 DELL M09 06040000 INTL 20060912)
[ 0.000000] ACPI: FACS 0x00000000C3F9BFC0 000040
[ 0.000000] ACPI: HPET 0x00000000C3FFECC2 000038 (v01 DELL M09 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 0x00000000C3FFECFA 00003C (v01 DELL M09 06040000 LOHR 0000005A)
[ 0.000000] ACPI: APIC 0x00000000C3FFED36 0000BC (v01 DELL M09 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 0x00000000C3FFEDF2 000028 (v01 DELL M09 06040000 LTP 00000001)
[ 0.000000] ACPI: OSFR 0x00000000C3FFEE1A 000070 (v01 DELL DELL 06040000 ASL 00000061)
[ 0.000000] ACPI: SLIC 0x00000000C3FFEE8A 000176 (v01 DELL FX09 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT 0x00000000C3FE0000 0009F1 (v01 PmRef CpuPm 00003000 INTL 20090320)
[ 0.000000] ACPI: SSDT 0x00000000C3FDF000 000259 (v01 PmRef Cpu0Tst 00003000 INTL 20090320)
[ 0.000000] ACPI: SSDT 0x00000000C3FDE000 00049F (v01 PmRef ApTst 00003000 INTL 20090320)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000237ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x237ffffff]
[ 0.000000] NODE_DATA [mem 0x237ff3000-0x237ff7fff]
[ 0.000000] [ffffea0000000000-ffffea0008dfffff] PMD -> [ffff88022f600000-ffff8802375fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x237ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009bfff]
[ 0.000000] node 0: [mem 0x00100000-0xc3a7bfff]
[ 0.000000] node 0: [mem 0xc3a82000-0xc3be9fff]
[ 0.000000] node 0: [mem 0xc3c0f000-0xc3c6efff]
[ 0.000000] node 0: [mem 0xc3f0f000-0xc3f16fff]
[ 0.000000] node 0: [mem 0xc3f1f000-0xc3f80fff]
[ 0.000000] node 0: [mem 0xc3f9f000-0xc3fdcfff]
[ 0.000000] node 0: [mem 0xc3fff000-0xc3ffffff]
[ 0.000000] node 0: [mem 0x100000000-0x237ffffff]
[ 0.000000] On node 0 totalpages: 2079880
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12468 pages used for memmap
[ 0.000000] DMA32 zone: 797933 pages, LIFO batch:31
[ 0.000000] Normal zone: 19968 pages used for memmap
[ 0.000000] Normal zone: 1277952 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc3a7c000-0xc3a81fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc3bea000-0xc3c0efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc3c6f000-0xc3c6ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc3c70000-0xc3cf0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc3cf1000-0xc3f0efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc3f17000-0xc3f1efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc3f81000-0xc3f9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc3fdd000-0xc3ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc5ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc6000000-0xc77fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc7800000-0xc7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc8000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf0703fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0704000-0xf0704fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0705000-0xfeafefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeaff000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xc8000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880237c00000 s86784 r8192 d23808 u262144
[ 0.000000] pcpu-alloc: s86784 r8192 d23808 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2047359
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=652fafcb-9a22-4cd0-8554-460d758126cc rw
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8106532K/8319520K available (5335K kernel code, 887K rwdata, 1688K rodata, 1128K init, 1164K bss, 212988K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1728.959 MHz processor
[ 0.000048] Calibrating delay loop (skipped), value calculated using timer frequency.. 3459.99 BogoMIPS (lpj=5763196)
[ 0.000051] pid_max: default: 32768 minimum: 301
[ 0.000060] ACPI: Core revision 20140424
[ 0.013580] ACPI: All ACPI Tables successfully acquired
[ 0.023377] Security Framework initialized
[ 0.023384] Yama: becoming mindful.
[ 0.024083] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.026165] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.027064] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.027078] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.027376] Initializing cgroup subsys memory
[ 0.027402] Initializing cgroup subsys devices
[ 0.027410] Initializing cgroup subsys freezer
[ 0.027414] Initializing cgroup subsys net_cls
[ 0.027419] Initializing cgroup subsys blkio
[ 0.027446] CPU: Physical Processor ID: 0
[ 0.027448] CPU: Processor Core ID: 0
[ 0.027453] mce: CPU supports 9 MCE banks
[ 0.027465] CPU0: Thermal monitoring enabled (TM1)
[ 0.027475] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 6
[ 0.027572] Freeing SMP alternatives memory: 20K (ffffffff819f9000 - ffffffff819fe000)
[ 0.028601] ftrace: allocating 20438 entries in 80 pages
[ 0.041910] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.074900] smpboot: CPU0: Intel(R) Core(TM) i7 CPU Q 740 @ 1.73GHz (fam: 06, model: 1e, stepping: 05)
[ 0.179631] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[ 0.179652] perf_event_intel: CPU erratum AAJ80 worked around
[ 0.179654] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.179656] ... version: 3
[ 0.179658] ... bit width: 48
[ 0.179659] ... generic registers: 4
[ 0.179660] ... value mask: 0000ffffffffffff
[ 0.179661] ... max period: 000000007fffffff
[ 0.179663] ... fixed-purpose events: 3
[ 0.179664] ... event mask: 000000070000000f
[ 0.203037] x86: Booting SMP configuration:
[ 0.203040] .... node #0, CPUs: #1
[ 0.216378] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.223033] #2 #3 #4 #5 #6 #7
[ 0.336263] x86: Booted up 1 node, 8 CPUs
[ 0.336267] smpboot: Total of 8 processors activated (27674.98 BogoMIPS)
[ 0.342350] devtmpfs: initialized
[ 0.345861] PM: Registering ACPI NVS region [mem 0xc3c70000-0xc3cf0fff] (528384 bytes)
[ 0.345874] PM: Registering ACPI NVS region [mem 0xc3f81000-0xc3f9efff] (122880 bytes)
[ 0.347195] pinctrl core: initialized pinctrl subsystem
[ 0.347244] RTC time: 0:13:26, date: 09/30/14
[ 0.347304] NET: Registered protocol family 16
[ 0.347442] cpuidle: using governor ladder
[ 0.347445] cpuidle: using governor menu
[ 0.347473] ACPI: bus type PCI registered
[ 0.347475] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.347576] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.347579] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.348242] PCI: Using configuration type 1 for base access
[ 0.360029] ACPI: Added _OSI(Module Device)
[ 0.360032] ACPI: Added _OSI(Processor Device)
[ 0.360034] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.360035] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.363464] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.379612] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.393321] ACPI: Dynamic OEM Table Load:
[ 0.393330] ACPI: SSDT 0xFFFF88022BE82400 0003ED (v01 PmRef Cpu0Ist 00003000 INTL 20090320)
[ 0.393928] ACPI: Dynamic OEM Table Load:
[ 0.393936] ACPI: SSDT 0xFFFF88022BEB1000 0005CD (v01 PmRef Cpu0Cst 00003001 INTL 20090320)
[ 0.419845] ACPI: Dynamic OEM Table Load:
[ 0.419852] ACPI: SSDT 0xFFFF88022BE82C00 000303 (v01 PmRef ApIst 00003000 INTL 20090320)
[ 0.432999] ACPI: Dynamic OEM Table Load:
[ 0.433006] ACPI: SSDT 0xFFFF88022BE99A00 000119 (v01 PmRef ApCst 00003000 INTL 20090320)
[ 1.326065] ACPI: Interpreter enabled
[ 1.326074] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 1.326080] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 1.326099] ACPI: (supports S0 S3 S4 S5)
[ 1.326101] ACPI: Using IOAPIC for interrupt routing
[ 1.326142] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.333007] ACPI: Power Resource [FN00] (off)
[ 1.333122] ACPI: Power Resource [FN01] (off)
[ 1.333858] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 1.333865] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 1.333907] \_SB_.PCI0:_OSC invalid UUID
[ 1.333909] _OSC request data:1 1f 0
[ 1.333914] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 1.334941] PCI host bridge to bus 0000:00
[ 1.334945] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 1.334948] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.334950] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.334952] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.334955] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 1.334957] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 1.334959] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 1.334962] pci_bus 0000:00: root bus resource [mem 0xc8000000-0xfebfffff]
[ 1.334972] pci 0000:00:00.0: [8086:d132] type 00 class 0x060000
[ 1.335119] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
[ 1.335181] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.335245] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 1.335305] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
[ 1.335439] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
[ 1.335573] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
[ 1.335702] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
[ 1.335832] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
[ 1.335946] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
[ 1.336099] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 1.336141] pci 0000:00:16.0: reg 0x10: [mem 0xf0705800-0xf070580f 64bit]
[ 1.336240] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.336375] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 1.336410] pci 0000:00:1a.0: reg 0x10: [mem 0xf0705c00-0xf0705fff]
[ 1.336513] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.336581] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 1.336643] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 1.336666] pci 0000:00:1b.0: reg 0x10: [mem 0xf0700000-0xf0703fff 64bit]
[ 1.336753] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.336821] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 1.336882] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 1.336973] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.337041] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 1.337099] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 1.337189] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.337257] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 1.337314] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
[ 1.337404] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 1.337471] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 1.337543] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 1.337578] pci 0000:00:1d.0: reg 0x10: [mem 0xf0706000-0xf07063ff]
[ 1.337685] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.337752] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 1.337810] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 1.337927] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 1.337991] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[ 1.338216] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
[ 1.338246] pci 0000:00:1f.2: reg 0x10: [io 0x1830-0x1837]
[ 1.338259] pci 0000:00:1f.2: reg 0x14: [io 0x1824-0x1827]
[ 1.338272] pci 0000:00:1f.2: reg 0x18: [io 0x1828-0x182f]
[ 1.338285] pci 0000:00:1f.2: reg 0x1c: [io 0x1820-0x1823]
[ 1.338298] pci 0000:00:1f.2: reg 0x20: [io 0x1800-0x181f]
[ 1.338312] pci 0000:00:1f.2: reg 0x24: [mem 0xf0705000-0xf07057ff]
[ 1.338374] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.338487] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 1.338512] pci 0000:00:1f.3: reg 0x10: [mem 0xf0706400-0xf07064ff 64bit]
[ 1.338539] pci 0000:00:1f.3: reg 0x20: [io 0x1840-0x185f]
[ 1.338730] pci 0000:02:00.0: [1002:68e0] type 00 class 0x030000
[ 1.338747] pci 0000:02:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.338758] pci 0000:02:00.0: reg 0x18: [mem 0xcfee0000-0xcfefffff 64bit]
[ 1.338766] pci 0000:02:00.0: reg 0x20: [io 0x2000-0x20ff]
[ 1.338780] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 1.338817] pci 0000:02:00.0: supports D1 D2
[ 1.338878] pci 0000:02:00.1: [1002:aa68] type 00 class 0x040300
[ 1.338894] pci 0000:02:00.1: reg 0x10: [mem 0xcfedc000-0xcfedffff 64bit]
[ 1.338959] pci 0000:02:00.1: supports D1 D2
[ 1.342669] pci 0000:00:03.0: PCI bridge to [bus 02]
[ 1.342677] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
[ 1.342684] pci 0000:00:03.0: bridge window [mem 0xcfe00000-0xcfefffff]
[ 1.342693] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.342913] pci 0000:03:00.0: [14e4:1692] type 00 class 0x020000
[ 1.343024] pci 0000:03:00.0: reg 0x10: [mem 0xf0300000-0xf030ffff 64bit]
[ 1.343657] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 1.343742] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 1.343882] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 1.343893] pci 0000:00:1c.0: bridge window [mem 0xf0300000-0xf03fffff]
[ 1.343992] acpiphp: Slot [1] registered
[ 1.344007] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
[ 1.344016] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 1.344025] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf02fffff]
[ 1.344036] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 1.344367] pci 0000:06:00.0: [8086:422c] type 00 class 0x028000
[ 1.344650] pci 0000:06:00.0: reg 0x10: [mem 0xf0400000-0xf0401fff 64bit]
[ 1.346064] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 1.346313] pci 0000:06:00.0: System wakeup disabled by ACPI
[ 1.346546] pci 0000:00:1c.2: PCI bridge to [bus 06]
[ 1.346556] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff]
[ 1.346660] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[ 1.346675] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.346677] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.346680] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.346682] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 1.346684] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 1.346687] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 1.346689] pci 0000:00:1e.0: bridge window [mem 0xc8000000-0xfebfffff] (subtractive decode)
[ 1.347415] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 1.347495] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 1.347574] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 1.347647] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 1.347725] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 1.347804] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 1.347885] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 1.347963] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 1.347994] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 1.347999] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 1.348004] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 1.348060] PCI host bridge to bus 0000:ff
[ 1.348064] pci_bus 0000:ff: root bus resource [bus ff]
[ 1.348070] pci 0000:ff:00.0: [8086:2c52] type 00 class 0x060000
[ 1.348129] pci 0000:ff:00.1: [8086:2c81] type 00 class 0x060000
[ 1.348192] pci 0000:ff:02.0: [8086:2c90] type 00 class 0x060000
[ 1.348247] pci 0000:ff:02.1: [8086:2c91] type 00 class 0x060000
[ 1.348303] pci 0000:ff:03.0: [8086:2c98] type 00 class 0x060000
[ 1.348356] pci 0000:ff:03.1: [8086:2c99] type 00 class 0x060000
[ 1.348410] pci 0000:ff:03.4: [8086:2c9c] type 00 class 0x060000
[ 1.348465] pci 0000:ff:04.0: [8086:2ca0] type 00 class 0x060000
[ 1.348520] pci 0000:ff:04.1: [8086:2ca1] type 00 class 0x060000
[ 1.348575] pci 0000:ff:04.2: [8086:2ca2] type 00 class 0x060000
[ 1.348628] pci 0000:ff:04.3: [8086:2ca3] type 00 class 0x060000
[ 1.348684] pci 0000:ff:05.0: [8086:2ca8] type 00 class 0x060000
[ 1.348738] pci 0000:ff:05.1: [8086:2ca9] type 00 class 0x060000
[ 1.348792] pci 0000:ff:05.2: [8086:2caa] type 00 class 0x060000
[ 1.348845] pci 0000:ff:05.3: [8086:2cab] type 00 class 0x060000
[ 1.349048] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 1.349316] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 1.349454] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.349459] vgaarb: loaded
[ 1.349460] vgaarb: bridge control possible 0000:02:00.0
[ 1.349504] PCI: Using ACPI for IRQ routing
[ 1.356071] PCI: pci_cache_line_size set to 64 bytes
[ 1.356281] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
[ 1.356283] e820: reserve RAM buffer [mem 0xc3a7c000-0xc3ffffff]
[ 1.356286] e820: reserve RAM buffer [mem 0xc3bea000-0xc3ffffff]
[ 1.356289] e820: reserve RAM buffer [mem 0xc3c6f000-0xc3ffffff]
[ 1.356291] e820: reserve RAM buffer [mem 0xc3f17000-0xc3ffffff]
[ 1.356293] e820: reserve RAM buffer [mem 0xc3f81000-0xc3ffffff]
[ 1.356295] e820: reserve RAM buffer [mem 0xc3fdd000-0xc3ffffff]
[ 1.356426] NetLabel: Initializing
[ 1.356427] NetLabel: domain hash size = 128
[ 1.356428] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.356446] NetLabel: unlabeled traffic allowed by default
[ 1.356505] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[ 1.356514] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
[ 1.356521] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.358579] hpet: hpet2 irq 40 for MSI
[ 1.358647] hpet: hpet3 irq 41 for MSI
[ 1.358721] hpet: hpet4 irq 42 for MSI
[ 1.358783] hpet: hpet5 irq 43 for MSI
[ 1.358849] hpet: hpet6 irq 44 for MSI
[ 1.358988] Switched to clocksource hpet
[ 1.365036] pnp: PnP ACPI init
[ 1.365056] ACPI: bus type PNP registered
[ 1.365296] system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
[ 1.365301] system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 1.365370] system 00:01: [io 0x0910-0x0917] has been reserved
[ 1.365373] system 00:01: [io 0x0500-0x050f] has been reserved
[ 1.365376] system 00:01: [io 0xffff] has been reserved
[ 1.365379] system 00:01: [io 0x0400-0x047f] could not be reserved
[ 1.365381] system 00:01: [io 0x1180-0x11ff] has been reserved
[ 1.365384] system 00:01: [io 0x164e-0x164f] has been reserved
[ 1.365386] system 00:01: [io 0xfe00-0xfe01] has been reserved
[ 1.365390] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.365455] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.365496] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.365537] pnp 00:04: Plug and Play ACPI device, IDs DLL0404 PNP0f13 (active)
[ 1.366011] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.366015] system 00:05: [mem 0xfed1b000-0xfed1bfff] has been reserved
[ 1.366020] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.366023] system 00:05: [mem 0xf0704000-0xf0704fff] has been reserved
[ 1.366025] system 00:05: [mem 0xc8000000-0xc8000fff] has been reserved
[ 1.366028] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.366031] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.366033] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 1.366036] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.366040] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.366223] pnp: PnP ACPI: found 6 devices
[ 1.366225] ACPI: bus type PNP unregistered
[ 1.373688] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 1.373693] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 1.373712] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
[ 1.373715] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000
[ 1.373732] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 1.373734] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 1.373737] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 1.373740] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 1.373750] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc8100000-0xc82fffff 64bit pref]
[ 1.373756] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc8300000-0xc84fffff 64bit pref]
[ 1.373760] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 1.373763] pci 0000:00:1c.2: BAR 13: assigned [io 0x5000-0x5fff]
[ 1.373768] pci 0000:02:00.0: BAR 6: assigned [mem 0xcfe00000-0xcfe1ffff pref]
[ 1.373771] pci 0000:00:03.0: PCI bridge to [bus 02]
[ 1.373774] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
[ 1.373779] pci 0000:00:03.0: bridge window [mem 0xcfe00000-0xcfefffff]
[ 1.373783] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.373788] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 1.373795] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 1.373805] pci 0000:00:1c.0: bridge window [mem 0xf0300000-0xf03fffff]
[ 1.373814] pci 0000:00:1c.0: bridge window [mem 0xc8100000-0xc82fffff 64bit pref]
[ 1.373825] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
[ 1.373833] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 1.373842] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf02fffff]
[ 1.373851] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 1.373862] pci 0000:00:1c.2: PCI bridge to [bus 06]
[ 1.373870] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
[ 1.373879] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff]
[ 1.373888] pci 0000:00:1c.2: bridge window [mem 0xc8300000-0xc84fffff 64bit pref]
[ 1.373899] pci 0000:00:1e.0: PCI bridge to [bus 07]
[ 1.373914] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.373917] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.373919] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.373921] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 1.373924] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 1.373926] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
[ 1.373928] pci_bus 0000:00: resource 10 [mem 0xc8000000-0xfebfffff]
[ 1.373931] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 1.373933] pci_bus 0000:02: resource 1 [mem 0xcfe00000-0xcfefffff]
[ 1.373936] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.373938] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
[ 1.373940] pci_bus 0000:03: resource 1 [mem 0xf0300000-0xf03fffff]
[ 1.373943] pci_bus 0000:03: resource 2 [mem 0xc8100000-0xc82fffff 64bit pref]
[ 1.373945] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 1.373947] pci_bus 0000:04: resource 1 [mem 0xf0200000-0xf02fffff]
[ 1.373950] pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[ 1.373952] pci_bus 0000:06: resource 0 [io 0x5000-0x5fff]
[ 1.373954] pci_bus 0000:06: resource 1 [mem 0xf0400000-0xf04fffff]
[ 1.373957] pci_bus 0000:06: resource 2 [mem 0xc8300000-0xc84fffff 64bit pref]
[ 1.373959] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
[ 1.373962] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
[ 1.373964] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.373966] pci_bus 0000:07: resource 7 [mem 0x000d4000-0x000d7fff]
[ 1.373968] pci_bus 0000:07: resource 8 [mem 0x000d8000-0x000dbfff]
[ 1.373971] pci_bus 0000:07: resource 9 [mem 0x000e0000-0x000e3fff]
[ 1.373973] pci_bus 0000:07: resource 10 [mem 0xc8000000-0xfebfffff]
[ 1.374005] NET: Registered protocol family 2
[ 1.374262] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.374559] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.374958] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.374982] TCP: reno registered
[ 1.374998] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.375081] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.375203] NET: Registered protocol family 1
[ 1.375845] pci 0000:02:00.0: Boot video device
[ 1.375936] PCI: CLS 64 bytes, default 64
[ 1.375985] Unpacking initramfs...
[ 1.450890] Freeing initrd memory: 3120K (ffff8800379d8000 - ffff880037ce4000)
[ 1.450900] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.450903] software IO TLB [mem 0xbfa7c000-0xc3a7c000] (64MB) mapped at [ffff8800bfa7c000-ffff8800c3a7bfff]
[ 1.450952] Simple Boot Flag at 0x36 set to 0x1
[ 1.451393] Scanning for low memory corruption every 60 seconds
[ 1.451809] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 1.452261] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.454040] zbud: loaded
[ 1.454273] VFS: Disk quotas dquot_6.5.2
[ 1.454320] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.454464] msgmni has been set to 15839
[ 1.454534] Key type big_key registered
[ 1.454794] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.454875] io scheduler noop registered
[ 1.454879] io scheduler deadline registered
[ 1.454941] io scheduler cfq registered (default)
[ 1.455775] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.455794] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.455830] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 1.455831] vesafb: scrolling: redraw
[ 1.455833] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 1.455853] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010e80000, using 3072k, total 3072k
[ 1.574668] Console: switching to colour frame buffer device 128x48
[ 1.693436] fb0: VESA VGA frame buffer device
[ 1.693457] intel_idle: MWAIT substates: 0x1120
[ 1.693473] intel_idle: v0.4 model 0x1E
[ 1.693475] intel_idle: lapic_timer_reliable_states 0x2
[ 1.693949] GHES: HEST is not enabled!
[ 1.694045] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.694683] Linux agpgart interface v0.103
[ 1.694762] rtc_cmos 00:02: RTC can wake from S4
[ 1.694923] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.694966] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.694982] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.695119] TCP: cubic registered
[ 1.695238] NET: Registered protocol family 10
[ 1.695532] NET: Registered protocol family 17
[ 1.696026] registered taskstats version 1
[ 1.696682] Magic number: 14:437:204
[ 1.696709] acpi device:59: hash matches
[ 1.696719] acpi device:2c: hash matches
[ 1.696811] rtc_cmos 00:02: setting system clock to 2014-09-30 00:13:27 UTC (1412036007)
[ 1.697022] PM: Hibernation image not present or could not be loaded.
[ 1.698955] Freeing unused kernel memory: 1128K (ffffffff818df000 - ffffffff819f9000)
[ 1.698959] Write protecting the kernel read-only data: 8192k
[ 1.704529] Freeing unused kernel memory: 796K (ffff880001539000 - ffff880001600000)
[ 1.706993] Freeing unused kernel memory: 360K (ffff8800017a6000 - ffff880001800000)
[ 1.723222] random: systemd-tmpfile urandom read with 10 bits of entropy available
[ 1.726313] systemd-udevd[84]: starting version 216
[ 1.750954] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.761851] i8042: Detected active multiplexing controller, rev 1.1
[ 1.765273] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.765338] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.765399] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.765463] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.765567] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.769703] ACPI: bus type USB registered
[ 1.769802] SCSI subsystem initialized
[ 1.769804] usbcore: registered new interface driver usbfs
[ 1.769859] usbcore: registered new interface driver hub
[ 1.770012] usbcore: registered new device driver usb
[ 1.771662] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.773005] ehci-pci: EHCI PCI platform driver
[ 1.773119] libata version 3.00 loaded.
[ 1.773323] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.773338] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.773363] ehci-pci 0000:00:1a.0: debug port 2
[ 1.777407] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.777437] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf0705c00
[ 1.785529] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.785893] hub 1-0:1.0: USB hub found
[ 1.785922] hub 1-0:1.0: 3 ports detected
[ 1.786574] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.786592] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.786634] ehci-pci 0000:00:1d.0: debug port 2
[ 1.790657] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.790673] ehci-pci 0000:00:1d.0: irq 20, io mem 0xf0706000
[ 1.798854] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.799240] hub 2-0:1.0: USB hub found
[ 1.799257] hub 2-0:1.0: 3 ports detected
[ 1.799619] ahci 0000:00:1f.2: version 3.0
[ 1.799853] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 1.799884] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.804130] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.812224] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 1.812234] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 1.834196] scsi0 : ahci
[ 1.835068] scsi1 : ahci
[ 1.835917] scsi2 : ahci
[ 1.836544] scsi3 : ahci
[ 1.837241] scsi4 : ahci
[ 1.837870] scsi5 : ahci
[ 1.838021] ata1: SATA max UDMA/133 abar m2048@0xf0705000 port 0xf0705100 irq 45
[ 1.838032] ata2: SATA max UDMA/133 abar m2048@0xf0705000 port 0xf0705180 irq 45
[ 1.838035] ata3: DUMMY
[ 1.838038] ata4: DUMMY
[ 1.838043] ata5: SATA max UDMA/133 abar m2048@0xf0705000 port 0xf0705300 irq 45
[ 1.838051] ata6: SATA max UDMA/133 abar m2048@0xf0705000 port 0xf0705380 irq 45
[ 2.092195] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.155559] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.162122] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR10002, max UDMA/133
[ 2.162129] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.168703] ata1.00: configured for UDMA/133
[ 2.169253] scsi 0:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0002 PQ: 0 ANSI: 5
[ 2.216879] hub 1-1:1.0: USB hub found
[ 2.217133] hub 1-1:1.0: 6 ports detected
[ 2.325410] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.450075] hub 2-1:1.0: USB hub found
[ 2.450318] hub 2-1:1.0: 8 ports detected
[ 2.451999] tsc: Refined TSC clocksource calibration: 1729.000 MHz
[ 2.488691] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.491385] ata2.00: ATAPI: HL-DT-STDVD+/-RW GA31N, A102, max UDMA/100
[ 2.500441] ata2.00: configured for UDMA/100
[ 2.514976] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GA31N A102 PQ: 0 ANSI: 5
[ 2.851854] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.171719] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.179350] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.179354] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 3.179393] sd 0:0:0:0: [sda] Write Protect is off
[ 3.179396] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.179413] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.200660] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.200666] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.200889] sda: sda1
[ 3.201016] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.201298] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.452051] Switched to clocksource tsc
[ 3.560153] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.377618] random: nonblocking pool is initialized
[ 4.381174] systemd[1]: systemd 216 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN )
[ 4.381645] systemd[1]: Detected architecture 'x86-64'.
[ 4.409326] systemd[1]: Set hostname to <arch>.
[ 5.721524] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 5.721647] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.721673] systemd[1]: Starting Remote File Systems.
[ 5.723143] systemd[1]: Reached target Remote File Systems.
[ 5.723189] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 5.723265] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.723286] systemd[1]: Starting Paths.
[ 5.724448] systemd[1]: Reached target Paths.
[ 5.724510] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 5.727072] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.727101] systemd[1]: Starting Encrypted Volumes.
[ 5.728520] systemd[1]: Reached target Encrypted Volumes.
[ 5.728544] systemd[1]: Starting Root Slice.
[ 5.750786] systemd[1]: Created slice Root Slice.
[ 5.750814] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 5.752555] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 5.752578] systemd[1]: Starting Delayed Shutdown Socket.
[ 5.754207] systemd[1]: Listening on Delayed Shutdown Socket.
[ 5.754231] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 5.756078] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.756100] systemd[1]: Starting Journal Socket (/dev/log).
[ 5.757697] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.757720] systemd[1]: Starting LVM2 metadata daemon socket.
[ 5.759334] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 5.759356] systemd[1]: Starting User and Session Slice.
[ 5.761272] systemd[1]: Created slice User and Session Slice.
[ 5.761307] systemd[1]: Starting udev Control Socket.
[ 5.762740] systemd[1]: Listening on udev Control Socket.
[ 5.762770] systemd[1]: Starting udev Kernel Socket.
[ 5.764190] systemd[1]: Listening on udev Kernel Socket.
[ 5.764216] systemd[1]: Starting Journal Socket.
[ 5.765551] systemd[1]: Listening on Journal Socket.
[ 5.765588] systemd[1]: Starting System Slice.
[ 5.767256] systemd[1]: Created slice System Slice.
[ 5.767297] systemd[1]: Started File System Check on Root Device.
[ 5.767319] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 5.818758] systemd[1]: Started Set Up Additional Binary Formats.
[ 5.818800] systemd[1]: Starting udev Coldplug all Devices...
[ 5.821120] systemd[1]: Mounting Debug File System...
[ 5.823057] systemd[1]: Starting Setup Virtual Console...
[ 5.825188] systemd[1]: Mounting Huge Pages File System...
[ 5.827248] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.981682] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 6.114414] systemd[1]: Starting Load Kernel Modules...
[ 6.116420] systemd[1]: Starting system-getty.slice.
[ 6.118219] systemd[1]: Created slice system-getty.slice.
[ 6.118261] systemd[1]: Starting Journal Service...
[ 6.121369] systemd[1]: Started Journal Service.
[ 6.586429] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 7.659659] media: Linux media interface: v0.10
[ 7.741403] Linux video capture interface: v2.00
[ 7.918282] usbcore: registered new interface driver uvcvideo
[ 7.918284] USB Video Class driver (1.1.1)
[ 7.963811] Adding 10485756k swap on /swapfile. Priority:-1 extents:14 across:11231228k FS
[ 7.965281] systemd-udevd[199]: starting version 216
[ 8.363580] systemd-journald[179]: Received request to flush runtime journal from PID 1
[ 12.094658] ACPI: AC Adapter [ADP1] (on-line)
[ 12.140834] ACPI: Video Device [ATID] (multi-head: yes rom: no post: no)
[ 12.149455] acpi device:54: registered as cooling_device8
[ 12.149520] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:53/LNXVIDEO:02/input/input5
[ 12.537723] [Firmware Bug]: battery: reported current charge level (2481) is higher than reported maximum charge level (2481).
[ 12.537834] ACPI: Battery Slot [BAT1] (battery present)
[ 12.655014] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
[ 12.655045] ACPI: Lid Switch [LID0]
[ 12.655098] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7
[ 12.655102] ACPI: Power Button [PWRB]
[ 12.655155] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 12.655158] ACPI: Power Button [PWRF]
[ 12.657748] wmi: Mapper loaded
[ 12.795460] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140424/utaddress-258)
[ 12.795465] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.795473] ACPI Warning: SystemIO range 0x00000000000011c0-0x00000000000011cf conflicts with OpRegion 0x0000000000001180-0x00000000000011e3 (\GPIO) (20140424/utaddress-258)
[ 12.795476] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.795477] ACPI Warning: SystemIO range 0x00000000000011b0-0x00000000000011bf conflicts with OpRegion 0x0000000000001180-0x00000000000011e3 (\GPIO) (20140424/utaddress-258)
[ 12.795480] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.795481] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011af conflicts with OpRegion 0x0000000000001180-0x00000000000011e3 (\GPIO) (20140424/utaddress-258)
[ 12.795484] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.795485] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 12.855033] ACPI: Fan [FAN0] (off)
[ 12.855080] ACPI: Fan [FAN1] (off)
[ 12.913673] ACPI Warning: SystemIO range 0x0000000000001840-0x000000000000185f conflicts with OpRegion 0x0000000000001840-0x000000000000184f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[ 12.913678] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.921802] thermal LNXTHERM:00: registered as thermal_zone0
[ 12.921805] ACPI: Thermal Zone [TZ01] (27 C)
[ 12.960592] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.970042] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X
[ 13.082789] iTCO_vendor_support: vendor-support=0
[ 13.176153] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 13.208803] EDAC MC: Ver: 3.0.0
[ 13.299214] microcode: CPU0 sig=0x106e5, pf=0x10, revision=0x3
[ 13.299421] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 13.299460] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[ 13.299627] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 13.786051] input: Dell WMI hotkeys as /devices/virtual/input/input11
[ 13.786183] EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c50
[ 13.818575] cfg80211: Calling CRDA to update world regulatory domain
[ 13.849073] microcode: CPU1 sig=0x106e5, pf=0x10, revision=0x3
[ 13.907477] microcode: CPU2 sig=0x106e5, pf=0x10, revision=0x3
[ 13.907575] microcode: CPU3 sig=0x106e5, pf=0x10, revision=0x3
[ 13.907608] microcode: CPU4 sig=0x106e5, pf=0x10, revision=0x3
[ 13.907666] microcode: CPU5 sig=0x106e5, pf=0x10, revision=0x3
[ 13.907754] microcode: CPU6 sig=0x106e5, pf=0x10, revision=0x3
[ 13.907814] microcode: CPU7 sig=0x106e5, pf=0x10, revision=0x3
[ 13.907882] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 14.152987] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 14.152991] Copyright(c) 2003- 2014 Intel Corporation
[ 14.153235] iwlwifi 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 14.153491] iwlwifi 0000:06:00.0: irq 47 for MSI/MSI-X
[ 14.153912] iwlwifi 0000:06:00.0: Direct firmware load failed with error -2
[ 14.153915] iwlwifi 0000:06:00.0: Falling back to user helper
[ 14.154922] iwlwifi 0000:06:00.0: Direct firmware load failed with error -2
[ 14.154927] iwlwifi 0000:06:00.0: Falling back to user helper
[ 14.344828] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 583640
[ 14.390573] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input10
[ 14.423406] mousedev: PS/2 mouse device common for all mice
[ 15.069332] iwlwifi 0000:06:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
[ 15.141257] [drm] Initialized drm 1.1.0 20060810
[ 15.333255] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 15.482940] pps_core: LinuxPPS API ver. 1 registered
[ 15.482940] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 15.483829] PTP clock support registered
[ 15.663057] tg3.c:v3.137 (May 11, 2014)
[ 15.787086] iwlwifi 0000:06:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 15.787090] iwlwifi 0000:06:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 15.787093] iwlwifi 0000:06:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 15.787096] iwlwifi 0000:06:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
[ 15.787346] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S
[ 15.808676] snd_hda_intel 0000:02:00.1: Handle VGA-switcheroo audio client
[ 15.809174] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 15.809358] snd_hda_intel 0000:02:00.1: irq 49 for MSI/MSI-X
[ 15.851697] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 15.874430] [drm] radeon kernel modesetting enabled.
[ 15.874491] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[ 15.874493] fb: switching to radeondrmfb from VESA VGA
[ 15.874516] Console: switching to colour dummy device 80x25
[ 15.875051] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68E0 0x1028:0x0414).
[ 15.875074] [drm] register mmio base: 0xCFEE0000
[ 15.875077] [drm] register mmio size: 131072
[ 15.875128] ATOM BIOS: Dell
[ 15.875192] radeon 0000:02:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 15.875195] radeon 0000:02:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[ 15.875197] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 15.875198] [drm] RAM width 64bits DDR
[ 15.875318] [TTM] Zone kernel: Available graphics memory: 4055978 kiB
[ 15.875322] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 15.875325] [TTM] Initializing pool allocator
[ 15.875336] [TTM] Initializing DMA pool allocator
[ 15.875369] [drm] radeon: 1024M of VRAM memory ready
[ 15.875373] [drm] radeon: 1024M of GTT memory ready.
[ 15.875397] [drm] Loading CEDAR Microcode
[ 15.879270] libphy: tg3 mdio bus: probed
[ 15.946342] tg3 0000:03:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 00:24:e8:84:0d:42
[ 15.946348] tg3 0000:03:00.0 eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=300:01)
[ 15.946352] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 15.946356] tg3 0000:03:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 16.196562] systemd-udevd[219]: renamed network interface wlan0 to wlp6s0
[ 16.316154] [drm] Internal thermal controller without fan control
[ 16.352233] [drm] radeon: dpm initialized
[ 16.400670] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 16.401953] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 16.416903] [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
[ 16.417040] radeon 0000:02:00.0: WB enabled
[ 16.417043] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880226ebfc00
[ 16.417045] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880226ebfc0c
[ 16.417887] radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc90010f1c418
[ 16.417889] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 16.417889] [drm] Driver supports precise vblank timestamp query.
[ 16.417907] radeon 0000:02:00.0: irq 50 for MSI/MSI-X
[ 16.417919] radeon 0000:02:00.0: radeon: using MSI.
[ 16.417945] [drm] radeon: irq initialized.
[ 16.434931] [drm] ring test on 0 succeeded in 1 usecs
[ 16.434989] [drm] ring test on 3 succeeded in 1 usecs
[ 16.622585] [drm] ring test on 5 succeeded in 1 usecs
[ 16.622591] [drm] UVD initialized successfully.
[ 16.622845] [drm] ib test on ring 0 succeeded in 0 usecs
[ 16.622875] [drm] ib test on ring 3 succeeded in 0 usecs
[ 16.774620] [drm] ib test on ring 5 succeeded
[ 16.832629] [drm] radeon atom DIG backlight initialized
[ 16.832636] [drm] Radeon Display Connectors
[ 16.832639] [drm] Connector 0:
[ 16.832642] [drm] LVDS-1
[ 16.832647] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[ 16.832649] [drm] Encoders:
[ 16.832652] [drm] LCD1: INTERNAL_UNIPHY
[ 16.832655] [drm] Connector 1:
[ 16.832657] [drm] HDMI-A-1
[ 16.832659] [drm] HPD1
[ 16.832663] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 16.832666] [drm] Encoders:
[ 16.832668] [drm] DFP1: INTERNAL_UNIPHY1
[ 16.832671] [drm] Connector 2:
[ 16.832673] [drm] VGA-1
[ 16.832677] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 16.832679] [drm] Encoders:
[ 16.832682] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 17.026255] systemd-udevd[222]: renamed network interface eth0 to enp3s0
[ 17.065685] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input14
[ 17.261282] [drm] fb mappable at 0xD045E000
[ 17.261284] [drm] vram apper at 0xD0000000
[ 17.261286] [drm] size 4325376
[ 17.261287] [drm] fb depth is 24
[ 17.261288] [drm] pitch is 5632
[ 17.261534] fbcon: radeondrmfb (fb0) is primary device
[ 17.367223] sound hdaudioC0D0: ALC665: SKU not ready 0x598301f0
[ 17.367562] sound hdaudioC0D0: autoconfig: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:speaker
[ 17.367564] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 17.367566] sound hdaudioC0D0: hp_outs=2 (0x19/0x1b/0x0/0x0/0x0)
[ 17.367567] sound hdaudioC0D0: mono: mono_out=0x0
[ 17.367568] sound hdaudioC0D0: inputs:
[ 17.367570] sound hdaudioC0D0: Mic=0x1a
[ 17.367572] sound hdaudioC0D0: Internal Mic=0x12
[ 17.377094] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input15
[ 17.377822] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 17.378406] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 17.378500] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 17.442455] Console: switching to colour frame buffer device 170x48
[ 17.444812] radeon 0000:02:00.0: fb0: radeondrmfb frame buffer device
[ 17.444813] radeon 0000:02:00.0: registered panic notifier
[ 17.482703] [drm] Initialized radeon 2.39.0 20080528 for 0000:02:00.0 on minor 0
[ 26.212135] systemd-logind[264]: Watching system buttons on /dev/input/event4 (Power Button)
[ 31.178480] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S
[ 31.185236] iwlwifi 0000:06:00.0: Radio type=0x1-0x3-0x1
[ 31.399951] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S
[ 31.406681] iwlwifi 0000:06:00.0: Radio type=0x1-0x3-0x1
[ 31.545116] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[ 31.547041] tg3 0000:03:00.0: irq 51 for MSI/MSI-X
[ 31.571171] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 31.990689] tg3 0000:03:00.0 enp3s0: Link is down
[ 33.657456] cfg80211: Calling CRDA to update world regulatory domain
[ 36.391390] wlp6s0: authenticate with 00:0f:66:e4:92:87
[ 36.425158] wlp6s0: send auth to 00:0f:66:e4:92:87 (try 1/3)
[ 36.427197] wlp6s0: authenticated
[ 36.427394] iwlwifi 0000:06:00.0 wlp6s0: disabling HT/VHT due to WEP/TKIP use
[ 36.427400] iwlwifi 0000:06:00.0 wlp6s0: disabling HT as WMM/QoS is not supported by the AP
[ 36.427403] iwlwifi 0000:06:00.0 wlp6s0: disabling VHT as WMM/QoS is not supported by the AP
[ 36.427626] wlp6s0: associate with 00:0f:66:e4:92:87 (try 1/3)
[ 36.432924] wlp6s0: RX AssocResp from 00:0f:66:e4:92:87 (capab=0x411 status=0 aid=1)
[ 36.437622] wlp6s0: associated
[ 36.437651] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready
[ 444.136094] wlp6s0: deauthenticated from 00:0f:66:e4:92:87 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
[ 444.192300] cfg80211: Calling CRDA to update world regulatory domain
[ 445.342475] cfg80211: Calling CRDA to update world regulatory domain
[ 448.002035] wlp6s0: authenticate with 00:0f:66:e4:92:87
[ 448.003465] wlp6s0: send auth to 00:0f:66:e4:92:87 (try 1/3)
[ 448.011060] wlp6s0: authenticated
[ 448.011355] iwlwifi 0000:06:00.0 wlp6s0: disabling HT/VHT due to WEP/TKIP use
[ 448.011363] iwlwifi 0000:06:00.0 wlp6s0: disabling HT as WMM/QoS is not supported by the AP
[ 448.011368] iwlwifi 0000:06:00.0 wlp6s0: disabling VHT as WMM/QoS is not supported by the AP
[ 448.013855] wlp6s0: associate with 00:0f:66:e4:92:87 (try 1/3)
[ 448.031262] wlp6s0: RX AssocResp from 00:0f:66:e4:92:87 (capab=0x411 status=0 aid=1)
[ 448.039635] wlp6s0: associated
lspci
00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11)
00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11)
00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11)
00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11)
00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11)
00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11)
00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset P@davidm
Just ran
lsusb -v
and there is some output I don't understand. I don't see any sign of the integrated webcam but I will post the results anyway.
Bus 002 Device 006: ID 10d5:55a2 Uni Class Technology Co., Ltd 2Port KVMSwitcher
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x10d5 Uni Class Technology Co., Ltd
idProduct 0x55a2 2Port KVMSwitcher
bcdDevice 0.01
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 59
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 96mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.00
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 65
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 16
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.00
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 24
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 16
Bus 002 Device 005: ID 046d:c52f Logitech, Inc. Unifying Receiver
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc52f Unifying Receiver
bcdDevice 22.00
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 59
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 4
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 98mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 67
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 2
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 79
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0014 1x 20 bytes
bInterval 2
Bus 002 Device 004: ID 04d9:1603 Holtek Semiconductor, Inc. Keyboard
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x04d9 Holtek Semiconductor, Inc.
idProduct 0x1603 Keyboard
bcdDevice 3.10
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 59
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 62
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 101
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Bus 002 Device 003: ID 058f:9254 Alcor Micro Corp. Hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 8
idVendor 0x058f Alcor Micro Corp.
idProduct 0x9254 Hub
bcdDevice 3.12
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 255
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x8087 Intel Corp.
idProduct 0x0020 Integrated Rate Matching Hub
bcdDevice 0.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 12
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.16
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x8087 Intel Corp.
idProduct 0x0020 Integrated Rate Matching Hub
bcdDevice 0.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 12
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.16
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12 -
Quick Time is not recognizing my Digital video camera (sony digital 8)
Quick Time is not recognizing my Digital video camera (sony digital 8) Am using ieee cable and camera is recognized as on and imports if I open iMovie, but when I go to quick time, new movie, I get drop down message that says "No recording device found." All other applications are closed and not interfering with QT. How do I get QT to recognize camera?
VOB is an MPEG format for DVD videos.
http://filext.com/detaillist.php?extdetail=VOB
http://www.answers.com/topic/vob
See:
QuickTime: About using MPEG-1 and MPEG-2 media
http://docs.info.apple.com/article.html?artnum=61608
Using the QuickTime MPEG-2 Playback Component with VOB files
http://docs.info.apple.com/article.html?artnum=300516
QuickTime MPEG-2 Playback Component
http://www.apple.com/quicktime/mpeg2/
There are also a lot of free and shareware programs to convert VOB files.
http://www.versiontracker.com/php/search.php?mode=basic&action=search&str=vob&pl t%5B%5D=macosx&x=0&y=0 -
I am trying to connect my JVC Hard Disk Drive Camcorder to my IPAD 2 via the Apple camera kit. I am able to download photos, but video files not showing. Camera shows Mass Stoarge. How can I download videos please?
The file name only has 6 characters and I'm not sure what the .mod format is. So that's why they are not seen by the iPad.
Another way to transfer. You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
Cheers, Tom
Look at this link for convertion the .mod format.
http://www.makeuseof.com/tag/convert-mod-camcorder-video-format-mpg-instantly/
Message was edited by: Texas Mac Man -
I have a macbookpro. I use Aperture and Iphoto. When I connect any camera to the Mac it does not open it as a device in Iphoto, Aperture or in Finder. It use to work but just stopped. Any sugestions?
Here is the full story. It may be long so please bear with me. I take a lot of pictures and movies. Since I have over 30,000 pictures I decided to place the Iphoto library on an external drive to save space on my internal drive since ot was getting very full. After I did that it worked fine for a while. Then one day I could not open the Iphoto library. Since I was overseas at the time I brought it to the IStudio ( not an Istore) overseas. They said to rebuild the library and they would do that for me. It took all day since I had so many pictures. When they called me and told me it was ready, I went to pick it up. They started to show me the new library. It crashed again. Not knowing how to fix this at the ISudio, they installed Aperture and imported the Iphoto library. This worked fine for a short time.When back in the states, it crashed again just like Iphoto. I took it to the IStore. They did not know why the overseas Istudio did what they did what they did and rebuilt my aperture library. Again it worked fine. Now that I am overseas again. It crashed again. However, I concluded that the reason for these crashes is becuase I have the file on an external drive that derives its power from the Mac and not by itself. When I use it and stop for a while the MAC will go to sleep and this cuases the external drive to shut down. This then causes the library to have inconsistancies. Therefore, when it happened this time I tried to repair the library and after 36 hours it would close down Aperture. Therefore I decided to rebuild the library. That did not work either. So I tried opening the Aperture library with Iphoto. That seemed like it was going to work but after importing half of the 30,000 plus pictures. I photo shut down. I then made a new aperture libary and erged the old library with it. This worked. I now have an aperture library that works. However, when I plug my camera into the MAC nothing happens. The camera does not show up in devices in either Aperture, I photo nor in Finder. The USB port and cord I use works fine becuase I can read my external hard drives fine. I checked as SIG suggested in this thread and everything is set to open aperture when the camera is connected.
I have the newest OS version 10. 7. 2 and the computer frequently updates all my programs. I have not installed any ne software lately. The problem happens both if I am on battery or plugged in. Just before I came overseas the IStore replaced the Battery. I can go back to the IStudio here overseas but the last time I was there and told them about the problem ( I did not have my computer with me) they did not impress me with their wisdom. I will be back in that city in a month and can go there if need be. Thanks for all the help so far. God bless. -
IMac does not recognize digital video camera plugged into USB port
Hi Everyone,
I received a Kodak Zi8 digital video camera as a gift recently. I was told it was compatible with macs. When I plug the camera into the USB port of the mac it doesn't recognize that it is there. I read on one discussion board to turn the camera on and off if necessary. I have done so and it still doesn't recognize it. Does anyone have a solution they could recommend? Thanks in advance.With the Zi8, you have to manually import the video into iMovie.
Launch iMovie. Go to File - Import Movies. Find your camera volume (it may be called KODAK or NONAME), navigate into the folder structure, find the DCIM folder and import the .mov files you find there.
Matt -
Ichat 2.1 and canon digital video camera problems
i have ichat 2.1 running on my b/w g3 with a 900 mhz powerlogix zif upgrade...
i recently got my hands on a cool little program called ichat usbcam...
before i got that app, ichat would not recognize my canon digital video camera via firewire...now that i got ichat usbcam, it shows up and i can use the digital video camera...
however, i can't invite my brother to a one way video chat...when i invite him, his end shows up with a white screen...no video, but audio...
he has a g4 quicksilver...he is running tiger...we both use the aim account for ichat...
any ideas??? we really need some help on this because we both have 4 year old daughters who want to video chat...
he is going to get a camera if we can get this thing working...
G3 Blue and White/900 powerlogix zif upgrade Mac OS X (10.3.9) YesHi Seusman,
Sounds like you have cracked it.
Framerates are detemined by what processor you have, with some adjustment on a chat by chat basis depending what the other person can manage.
The Bitrate is controlled by what Connection Speed you have, The System Preference > Quicktime > Streaming tab setting and iChat > Preferences > Video section Bandwidth Setting, plus any adjustments to match who you are talking to.
The up speed is more important than the Download speed when we are talking ADSL connections.
Any spped test will tell you get about 80% of what the ISP says they sell you.
iChat will use about 80% of what is left (depending on settings)
It is somewhat lowered depending on the framerate your Mac can do and what other things yuo are asking the Procesor to do and how much RAM you have obviously can effect that as well.
The framerates you quote are the same as mine.
The bit rates if often what I see in iChat based on my 1Mb down /256K up service.
11:31 PM Wednesday; March 1, 2006 -
Re: Satellite L - How to connect my digital video cam?
I have a Canon digital video camera (bought in 2004). I have been using it to transfer movies onto my other Toshiba laptop, but there is no place to plug in on my new laptop. I did use a iEEE1394 but it doesn't work on this one.
What alternative is there?
Also on turning on the laptop I get a message saying TOSHIBA SERVICE STATION NOT WORKING and proceeds to solve it but nothing happens.
Any suggestions pls.Hey,
What notebook model you have it exactly? Some notebooks dont have firewire port but if your camera has USB port can use this port. As far as I know all notebooks have USB port
> Also on turning on the laptop I get a message saying TOSHIBA SERVICE STATION NOT WORKING and proceeds to solve it but nothing happens.
You should try to reinstall Service Station, I think this should work. Just download the newest version of Toshiba service station on official Toshiba website and install it:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
But dont forget to remove the old version first before you install the newest one. ;) -
My new MacBook Pro and Imac can't recognize my digital video cameras (Canon GL2 or Sony) via FireWire 800 9 pin to 4 pin cable. I've tried two different cables. Any suggestions? Thanks.
Is your DV camera plugged in to AC power (not batteries only)? When you step down from 9 pins to 4 pins, you lose the "power" pins.
-
I imported some 24P HD videos from my DSLR to Aperture but these videos do not show up in iMovie '09 for editing purposes. Although my previous 24P HD Videos from iPhoto '09 show up. Why can't I access these videos stored in Aperture library? I assumed that like the videos in iPhoto, I would be able to access the videos in Aperture through iMovie. Come on Apple! I am starting to get frustrated with your products here. And this is saying a lot when I have been using and loving apple products for the last 4 years.
Hi. My camera is a Canon 600D. And yes my videos are stored in the Aperture library and they are not referenced. Even then I tried to select all the videos in Aperture and clicked 'consolidate masters' and there was a messge that said all 'none of the files are referenced',... so they didn't need consolidating.
I also tried preferences> export> external video editor > choose > iMovie. And then right click on the video to edit with imovie. Even then the video didn't show up in iMovie. It seems like the only option for me is to import the videos directly to iMovie which means there will be two versions of the same file stored in my computer eating up space.
APPLE. What are you doing? -
I bought a new Iphone and I was unable to update with my iTunes because they wouldn't let me leave the store with out checking the camera and speakers. I had to start the phone. I tried connecting to iTunes when I got home but it's not showing in the devices. Please help me.
Look at this for possible solutions: iPhone, iPad, or iPod touch: Device not recognized in iTunes for Mac OS X, http://support.apple.com/kb/TS1591
-
i'm a novice at editing software and after creating some title slides and to go along with .wav file sound effects i started importing mpg movie files and jpeg pictures from my hard drive that went along with an mp3 song. when i went to export the video to check my progress only the title files and wav sound effects exported and none of the video or pictures or mp3 exported. i exported it as a windows media file to play in WMP. Would this have anything to do with the type of video i said i'd be using when setting up my project? Because none of that made any sense to me and i just picked the dv ntsc standard 48hz aspect. I have a cannon FS100 that records in MOD files (mpeg2). I downloaded them through the program that was provided with my camera to the hard drive and then into adobe. Would this cause my video to not show up in exported projects if i chose the incorrect presets? I don't want to keep editing this video if at the end i'll have to redo the entire thing due to incorrect presets so i thought i'd try the forums. Thanks for any help you can give.
hadn't found anything to explain my problem.
That's not quite the best approach. Don't look to finding this one answer, look to becoming a well educated professional in all aspects of video production before using this software. This is not a quick fix, it is a proper months or even years long method (depending on the degree you wish to attain).
As I said, for those without such dedication, there are consumer programs out there.
And of course, there is always the option of hiring a professional to do the job. We depend on folks like yourself to earn a living. Nothing wrong with supporting us. -
IMovie wont' recognize my Canon Digital Video Camera
When I hook up my Canon ZR70 MC digital video camera through my firewire port, iMovie doesn't recognize it even after I did the following:
turned the camera on and off.
took the tape in and out.
restarted computer with the camera in.
After speaking to Canon technical support, they've determined that since 'DV In' was blinking on the camcorder screen, there must be a problem with the firewire cable, the port, or I'd need a firewire update. I'm running OSX 10.4.5.
Anybody had this problem before? I doubt it's the cable or the port because both are new. And I tried it on multiple computers. Please help.sstrickeler,
First a few questions.
Has the camera ever worked correctly?
Are there any other FireWire devices attached to the computer?
Is the camera running of battery power or A/C?
Some other ideas in this thread:
http://discussions.apple.com/message.jspa?messageID=1649431#1649431
Matt -
SONY Digital Video Camera DCR-DVD 201 and iMovie
I have a sony Digital Video Camera
Posted: Aug 6, 2006 6:59 PM in response to: max Farina
Reply Email
Can I use this Digital camera with my MacBook Pro
it is a SONY DCR-DVD 201
I do not see a firewire port on the camera ONLY a USB.
How can I get my video from my DVD to iMovie?
I want to put my home video from this camera to iMovie, Can it be done?
I am going nuts, I paid alot of money for this camera and now I can't use it in my new Mac?
I am very new to Mac and this hurts!
PLEASE someone help me, I only see a USB, DO they sell some thing to help get the Video into iMOVIE?
Thanks......Search this forum for "compatible, DVD camcorder" and you will find many threads where people lament this truth:
iMovie is for miniDV formatted video connected via Firewire.
Mini DVD camcorders are designed for you to do very light editing on the camera before you finalize the DVD and don't support being imported into a computer. Anyway, many of the experts here know of converters and workarounds, if you want to spend some more money. You could start with these threads:
http://discussions.apple.com/thread.jspa?messageID=2404104�
http://discussions.apple.com/thread.jspa?messageID=2288697�
http://discussions.apple.com/thread.jspa?messageID=2243781�
Somewhere I have read a pretty detailed thread describing what converter you need and how to do it. So just keep searching... -
Looking for forums for Sony digital video camera recorder DCR-TRV 11
I've been thinking hard and decided that I WILL use my Sony digital video camera recorder DCR-TRV 11. (I was being tempted by a smaller Sony that has a 40x optical zoom.
Question: Do you know of where I can find a good forum for this brand and model? I Googled it but would like personal recommendations.
Thank you.
-LBengt Wärleby wrote:
Hi
Don't know of any other forum else this (and FinalCut)
Your Camera NEED an FireWire-Cable FW-800 <--> 4-pin or FW-400 <--> 4-pin
I have a FireWire cable.
The supplied USB-Cable will not work with iMovie or FinalCut - Sorry.
Yours Camera also can record Audio as 12-bit or 16-bit Audio.
Please - SET IT TO 16-bit (now) - else severe audio sync problems in iMovie
(FinalCut - might be able to Capture 32kHz audio)
How do I set my Sony digital video camera recorder DCR-TRV 11 to 16-bit?
Also, I do not have or use Final Cut.
Thank you for the warning about 16 bit. I wish you would tell me why it is important to set to 16 bit, though.
Thank you,
-L
Yours Bengt W
Don't know of any other forum else this (and FinalCut)
Your Camera NEED an FireWire-Cable FW-800 <--> 4-pin or FW-400 <--> 4-pin
The supplied USB-Cable will not work with iMovie or FinalCut - Sorry.
Yours Camera also can record Audio as 12-bit or 16-bit Audio.
Please - SET IT TO 16-bit (now) - else severe audio sync problems in iMovie
(FinalCut - might be able to Capture 32kHz audio)
Maybe you are looking for
-
Error while posting-(Travel Management)
Hi Experts, I am facing a problem while posting travel expenses to FI, when i execute PRFI i am getting a message "For the ISO code INR there is no unique SAP currency code for ALE". It is not an error message and trip will be posted with postable am
-
Not Connecting to Wired Network and Forcing the loss of all Connections on the Home Network
Just got a new G550 laptop w/Win 7 OS. Tried to connect to wired router and got message "network cable not connected". Recycled laptop and router and came up with router connected to the laptop. Same message after search and identify steps finished.
-
Hi Gurus , In DB13 T-code , what is the difference between the Full Database online + redolog backup and Whole database online + redolog backup ? Kindly tell which type the best one to take backup daily . Regards Selvan
-
Disk Utility reports "Underlying task reported failure"
I tried looking at Apple's own article on Disk Utility failing: http://docs.info.apple.com/article.html?artnum=302411 which refers me to the article entitled "Using Disk Utility in Mac OS X 10.4.3 or later to verify or repair disks" (http://docs.info
-
Error Message when trying to Execute Info Package
Hello, I was wondering if anyone could help me out with the following error message. I've replacated all datasources in BW. The infopackage is an internal load meaning the source system is BW not R/3. Any suggestions on how to remedy the following