DigitalPersona Personal doesnt work since I upgraded to IE 9

This happened when I called support for a different problem and the tech installed IE9 when he took over by remote access.
I checked the add-ons and DigitalPersona Personal doesn't show.
Should that be under "toolbars and extensions"?
I selected to show all add-ons and can't see the DigitalPersona Personal.
It shows in Firefox and when Firefox once attempted to automatically install an update, I got a warning that it would not work anymore. So I am limping along by using Firefox for all sites where i want to use the fingerprint reader to log in.
Apparently DigitalPersona doesn't support this product anymore and there isn't much help from HP.
Meanwhile, 3 hours later, after uninstalling and re-installing DigitalPersona Personal 4.11 it finally works.
HP is not of much help
With the automatic model detection the software doesn't show on the selection for my model. I had to search for the download ouside HP.
Doesn't leave a good impression about HP, they would only help for paid support.

I know that I would have to click on "Next" to get it to move, but that doesn't work, at least on my Dell laptop. Interestingly, it works fine on my Dell desktop. So, narrowing things down, we have this -- Dell Inspiron laptop running Windows 7 and FF 9 doesn't do Yahoo slideshows.

Similar Messages

Plants v zombies no longer works since I upgrade to 10.8.2

Plants v zombies no longer works since I upgrade to 10.8.2. I was wondering if anyone else has had this problem.

Hello:
That sounds like a game. I suggest you contact the game developer.
Barry

My mobile hotspot no longer works since I upgraded to mountain lion. What happened and how do I get it back?

My mobile hotspot (Samsung Note II) no longer works since I upgraded to mountain lion (running on MacBook Pro) What happened and how do I get it back? "
Keep getting error message:
"Could not join “NAME-HOTSPOT”.
A connection timeout occurred"
Please someone help me with this - I do a lot of travelling and use my hotspot!
Thanks

Take each of the following steps that you haven't already tried, until the problem is resolved. Some of these steps are only possible if you have control over the wrieless router.
Step 1
Turn Wi-Fi off and back on.
Step 2
Restart the router and the computer. Many problems are solved that way.
Step 3
Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
Step 4
Run the Network Diagnostics assistant.
Step 5
In OS X 10.8.4 or later, run Wireless Diagnostics and fix the issues listed in the Summary, if any.
Step 6
Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
Step 7
You may need to change other settings on the router. See the guidelines linked below:
Recommended settings for Wi-Fi routers and access points
Potential sources of interference
Step 8
Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
Step 9
Reset the System Management Controller (SMC).

HT6114 My Apple 7.2 mail does not work since I upgraded to OS X Mavericks, what has gone wrong?

My Apple 7.2 mail does not work since I upgraded to OS X Mavericks, what has gone wrong?

Have you tried using http://support.apple.com/kb/HT4505 guidance for scanning? Has always worked for me with my Epson scanner.

The remember me dialog box does not work since I upgraded to OS 10.10.1 and Safari 8.0

The remember me dialog box on various web sites does not work since I upgraded to OS 10.10.1 and Safari 8.0

Try running the combo update.
10.9.2

Hello where do i go to go back to have the i pod go back the way its came my sons facetime doesnt work may have to reset it

my sons face time no longer works since the first upgrade was wondering how to get it back to as if its just out of the box or what to do for facetime thanks

iOS: Troubleshooting FaceTime
Make sure both devices are fully updated. See:
Unable to make or receive FaceTime calls after April 16, 2014

The F5 Networks Host Plugin no longer works since I upgraded to Firefox 4.0.1 and this is a major problem. what needs to be done to correct this?

When attempting to login to a GlasPac (auto glass) website, it requires an F5 Plugin to be installed. This has been working in the past using Firefox 3.x.x and now since I upgraded to Firefox 4.0.1 it says the plugin in not compatibable with Firefox 4 and will not load it so I am dead in the water !!!!!!! The FF 4.0 upgrade has caused this serious situation ... what needs to be done to rectify it ???
Thanx in advance ... Denny

Do these hotfixes help you? http://support.f5.com/kb/en-us/solutions/public/12000/700/sol12757.html

I have an Iphone battery extender that no longer works since IOS7 upgrade

I have an Iphone battery extender that now appears not to work since the IOS7 upgrade? It is not an official Apple product but has worked well for over a year? any ideas as to a solution the battery charge indicator comes on then goes out after 20 secs

What did the battery's manufacturer say when you called them regarding THEIR product?

My hp laser jet 3050 no longer working since Yosemite upgrade. Help????

Since i upgraded to yosemite, my HP laserjet 3050 printer no longer working. i've tried uninstalling and reinstalling and still not working. Any suggestions?

Have you checked the HP web site for driver updates?
If you haven't done so already, try resetting the printing system.
OS X Mavericks: Reset the printing system also Yosemite
HP Print Drivers

Full-Text Search has not worked since we upgraded to 2012

I have a filestream database and table. Our full-text searches have always worked until we upgraded to SQL 2012 in December. Now, no file that has been uploaded since December is searchable. What has gone wrong here. It should have been
a clean upgrade. We are not getting any error messages. We are just not getting any records returned when we search on a word that we know are in the documents we've uploaded since December (for instance, the word 'aluminum').
Filestream is enabled for the instance.
A full-text catalog exists and contains a full-text index (the same one we've always had). Full-text indexing is ENABLED.
I've tried rebuilding the catalog and the index. I've tried to do a FULL POPULATION on the table.
We haven't changed our queries nor the way the files are uploaded.
Nothing works. I have been a database administrator since the SQL 2005 days and I have never seen anything like this.
Please help.

Hi GINGER PIERCE,
Since the issue regards SQL Server Search. I will help you post the question in the related forums. It is appropriate and more experts will assist you.
According to your description, in theory , if you can do a full-text search for SQL Server 2008, when upgrading the SQL Server version from 2008 to 2012, the Full text indexing feature should be run well in SQL Server 2012 databases. If not , you can try
to restore your database from SQL Server 2008 to SQL Server 2012, create an new Full-Text Catalog and Index on the table or view in the database, and then use Full Text Index to search words, phrases and multiple forms of word or phrase via FREETEXT() and
CANTAINS() with “and” or “or” operators. check if it is normal that the full-text search feature is enabled in the SQL Server 2012 instance. For more information , see:
Full Text Search step by step in SQL Server 2012.
Note: In SQL Server 2012 SP1 ， the server will report that Full Text Search is not supported in this edition of SQL Server when it clearly is. The workaround is to create the initial catalog by using a T-SQL query:
CREATE FULLTEXT CATALOG
In addition, since it is a fileStream database, we need to verify if you do Full Text Searches on documents in FileTables, if yes, you should enable FileStream database for your SQL Server, and enable FileTable options for the database. For more information,
see:
Full Text Searches on Documents in FileTables.
Regards,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

Steadyshot stabilization for video doesnt work since Lollipop update. HELP!

Where should I send information about SERIOUS issue of new Lollipop on XPERIA Z3? Since last update from Kitkat the SteadyShot stabilization for video doesnt work (intelligent mode works standard). Previously great videos are now shaky and simply ugly. Please SONY make something with that on next update. Probably Ill have to sell my Z3 if there will be no patch. Im filmaker who needs good video quality in his smartphone.

i tried both...still inteligent works as standar what means stabilization is very poor...here more info about that lollipop bug found on the net http://forum.xda-developers.com/z3-compact/help/steadyshot-intelligent-active-gone-t3106177

Dashlane doesn't work since I upgraded to 36.0

Since I upgrade to v36.0, my Dashlane no longer works. Is this going to be fixed soon? If not please tell me how I can go back to my previous Firefox version

There is another option in Preferences which controls this as well.
1. Click the iTunes Menu
2. Select Preferences
3. Click on "Syncing"
4. On the bottom of the screen is a checkbox "Disable automatic syncing for all iPhones and iPods"
Make sure that option is NOT checked.

Bluetooth doesnt work since tiger to leopard.

hello everybody!
i am new at this forum, so i am apologizing, if its the wrong place to post my messenge!
but i got a problem with bluetooth, i cant send anything from my phone to my macbook.. before i had tiger and it worked fine, but now, with leopard it doesnt work.. i can send from my macbook to my phone,(not iphone) but not from phone to mac..
when i search at my phone for bluetooth, i can find my macbook, but when i try to send it says, "you cant connect to this macbook"..
i have tried many of type of phones. SE, NOKIA, SAMSUNG. no one works.
anyone have any idea for this?
i am sry for my bad english!

Try the BlueTooth forum.
 Cheers! DALE

[SOLVED] lxdm autologin won't work since last upgrade

Hi,
Since last upgrade, lxdm won't autologin anymore.
I had a lxdm.conf.pacnew file wich added only a commented line that I added into the conf file, wich does look like this :
[base]
## uncomment and set autologin username to enable autologin
#autologin=dgod
autologin=Olaff
## uncomment and set timeout to enable timeout autologin,
## the value should >=5
# timeout=10
## default session or desktop used when no systemwide config
session=/usr/bin/startlxde
#session=/usr/bin/openbox-session
## uncomment and set to set numlock on your keyboard
# numlock=0
## set this if you don't want to put xauth file at ~/.Xauthority
# xauth_path=/tmp
# not ask password for users who have empty password
# skip_password=1
## greeter used to welcome the user
greeter=/usr/lib/lxdm/lxdm-greeter-gtk
[server]
## arg used to start xserver, not fully function
arg=/usr/bin/X -background vt1
# uncomment this if you really want xserver listen to tcp
# tcp_listen=1
# uncoment this if you want reset the xserver after logou
# reset=1
[display]
## gtk theme used by greeter
gtk_theme=Clearlooks
## background of the greeter
# bg=/usr/share/backgrounds/default.png
## if show bottom pane
bottom_pane=1
## if show language select control
lang=1
## if show keyboard layout select control
keyboard=0
## the theme of greeter
theme=Industrial
[input]
[userlist]
## if disable the user list control at greeter
disable=0
## whitelist user
white=
## blacklist user
black=
Since there were no uncommented lines added, I assumed it would make no difference.
Edit :
Now, the system goes to the login screen instead of autologin.
lxdm brings me to my session if I log in however.
Last edited by OlaffTheGreat (2013-09-21 18:00:09)

Here is my current /etc/lxdm/lxdm.conf file. Hope something in here can help you out.
[base]
## uncomment and set autologin username to enable autologin
autologin=andy
## uncomment and set timeout to enable timeout autologin,
## the value should >=5
# timeout=10
## default session or desktop used when no systemwide config
session=/usr/bin/startlxde
## uncomment and set to set numlock on your keyboard
numlock=1
## set this if you don't want to put xauth file at ~/.Xauthority
# xauth_path=/tmp
# not ask password for users who have empty password
# skip_password=1
## greeter used to welcome the user
#greeter=/usr/lib/lxdm/lxdm-greeter-gtk
[server]
## arg used to start xserver, not fully function
#arg=/usr/bin/X -background vt1
# uncomment this if you really want xserver listen to tcp
# tcp_listen=1
# uncoment this if you want reset the xserver after logou
# reset=1
[display]
## gtk theme used by greeter
gtk_theme=Clearlooks
## background of the greeter
# bg=/usr/share/backgrounds/default.png
## if show bottom pane
bottom_pane=1
## if show language select control
lang=
## if show keyboard layout select control
keyboard=0
## the theme of greeter
theme=Industrial
[input]
[userlist]
## if disable the user list control at greeter
disable=1
## whitelist user
white=
## blacklist user
black=
Not sure why OlaffTheGreat uses LXDM, but I use it because you get it for free as part of the LXDE group, and I'm too lazy to change it. My security is the 30 to 40 character passphrase I need to unlock my encrypted drives. Then having to type in an 8 character easily guessed user password is beyond annoying.
I just checked my pacman cache files and it looks like the upgrade to 0.4-1-25 is when I first got the error (currently listed as 9 days ago which would be about right). I upgraded, booted and got the login screen that I was not supposed to. I had just merged the pacnew file so it was fresh in my head and made the changes I described. Booted again and got the autologin and I didn't think another thing about it until I saw this post earlier today. Upgraded again this weekend to 0.4-1-27 with no problems.

Upgraded to IE9 and Digital Persona Personal doesnt work

Ive upgraded to ie9 and now my fingerprint reader doesnt pop up like it used to when i go to a website it knows. Any ideas

Probably the Digital Persona extension could've been disabled. Try Tools (Alt+x) --> Manage Addons, under Toolbars and extensions, check whether the Digital Persona Plugin is enabled or disabled. If it is disabled, enabling it should make it work. Hope this helps.

DigitalPer​sona Personal doesnt work since I upgraded to IE 9

Similar Messages

Maybe you are looking for

DigitalPersona Personal doesnt work since I upgraded to IE 9