Digitalpersona´s HP protecttools security manager does not recognize sign in pages as such with FF4

With FF3.6 and previous, when visiting i.e. my bank site, and loading a sign-in page previously recorded with sign-in info and passwords stored with ProtectTools Password Manager, I was prompted to fill and submit such stored info. Since upgrade to FF4, the mentioned soft does not recognize sign in pages as such, therefore, not prompting for fill in and submitt, nor does it recognize sign in pages on any site, to prompt for recording the sign in info or password.

I think that it is something wrong with kernel and graphic drivers but i'm not able to solve it from the beginning of using of Arch by me.
I'm not so sure this issue is software-related only because in my case it seems the laptop screen enters power-saving mode (10-min timeout) on its own without any events logged (as shown by dmesg) so my next thought was OK, I'm going to get rid of this issue disabling the screen power-saving timeout in the BIOS and set it to never power down or something like that and from then on managing power mode manually; ie: when I want to power down I will just use systemctl suspend/hibernate which work fine ... problem is: there are no related options in my BIOS for such timeout.
The only timeouts I have are in /etc/systemd/logind.conf set to 30min (#IdleActionSec) (commented) by default so these are not in effect because the screens goes blank after 10m which is less than the (default) 30m in logind. Maybe setting loggind to 9m (un-commented) to catch the event before the machine-default one ?
IdleActionSec=9min
IdleAction=suspend
Will check it and report back.

Similar Messages

  • Desktop Manager does not recognize USB Connection

    I have installed the Desktop Manager for MAC (v1.0.2) on my MacBook Pro Snow Leopard10.6.3.
    When I connect my Storm 9520 the Mac OS recognizes the media storage drives in the 'Finder'.  I can copy files to and from the device media using 'Finder' but the Desktop Manager does not recognize that the device is plugged into the USB (yes I have tried both USB connectors).
    file:///Users/Nigel/Desktop/WaitingForUSB.jpg

    I have an 8310, Macbook Pro running OSX 10.6 and the BB desktop v 1.0.2 build 8.  It recently stopped recognizing the USB connection as well.  I was able to sync my BB with the MAC but can no longer do so.  The MAC mounts the BB and I can access the SD card.  What gives here?

  • Anyone who has had a webcam failure where the "device manager does not recognize the hardware"?

    HP Pavilion dv7 running win 7 64 bit
    Device manager does not recognize trueVision HD webcam. Tried all the suggestions on HP website, which eventually says it's a hardware failure. Has anyone had any resolution to this issue? I see the problem occurs across various platforms with varying resolutions to the problem.

    Ha Ha. I'm replying to my own post!
    Solution.... If your laptop does not recognize the built-in camera at all in the device manager and your warranty has expired or your willing to void your warranty.  You can see if you have the same problem as I had. Gently pry the plastic frame around your camera and display screen apart you need to go at least half way down the sides. There is also some adhesive tape you will need to push to one side or the other. To the right of the camera there is a very small connector, it wont even look as if it is separated. Use a tweezer or small screwdriver to push the connector into the socket. This fixed my problem ...The next startup recognized the camera and has worked perfectly since. In my opinion (13yrs experience in reliability engineering semiconductor manufacturing) this is a manufacturing reliability issue either the socket cannot hold the connector in place or there is too much strain on the wiring to the connector. Good luck.

  • Password manager does not recognize windows password

    My password manager does not recognize windows password and I get a 'verification failed' after I swipe my finger.
    My finger print is recognized just fine, its the windows password that does not sync with the password manager since I had to change my windows password.
    What do I do?
    Rob

    I have the same issue   any help appreciated

  • Lightroom 5.6 does not recognize nef (RAW) image files generated with the new Nikon D750: who can help here or knows what to do? Thanks, Peter

    New Nikon D750:
    Lightroom 5.6 does not recognize nef (RAW) image files generated with the new Nikon D750: who can help here or knows what to do? Thanks, Peter

    LR 5.6 doesn't support the new Nikon D750. You have to wait to the next update.
    You con also install the release candidate of the DNG converter and convert your NEF files to dng.
    http://blogs.adobe.com/lightroomjournal/2014/10/1366.html
    Axel

  • Windows Security Suite does not recognize Verizon Internet Security Suite

    Windows Secuity Suite does not recognize that the Verizon Internet Security suite on one of my PC's is running and keeps popping up aWindows Security Alert. The Firewall is enabled within Verizon Internet Security suite.
    My other PC's don't have this issue.
    All PC's are running Windows Vista Home Premium.
    Any ideas?
    Cheers,
    Mark

    well that error message is saying that Windows security center no longer supports the way that the VISS is reporting. Which means that even though VISS is working and it is even reporting its status to WSC. WSC doesnt recognize it anymore. Likely one of the windows updates made the change. I can see the fight comming now. Verizon is going to say. Its working and if the other program doesnt support it, too bad. And windows is going to say the same thing in reverse. My guess would be that it will probably stay that way unless Verizon or Microsoft get enough complaints to make a change in the recognition system.
    But the good news is that VISS is running and protecting you. The WSC just doesnt "speak the same language" anymore and cant understand the message from VISS saying "I'm up and running"
    ====================================================================================
    Error exists between keyboard and chair.

  • Music Manager does not recognize my downloaded mus...

    I am using Nokia PC Suite 7.1.18.0 for my 5310. When I use the Music Manager to scan my computer for music files, it recognizes all the songs that I have burned from my CDs, but it does not recognize any of the music that I have downloaded from iTunes. If anyone could help, that would be great. I have had so many problems with Nokia PC Suite, and this is the one thing that I can't seem to figure out on my own!

    Open DTM and connect your BB via USB cable, then in desktop go to options and click on detect and look what it has there, if everything is ok go to main menu DTM and click on sync then on to config sync settings, make sure all is correct there, failing that in options you can check you setting in connections and PIN# are entered there.
    When you accept a solution from anyone could you please select the appropriate box.
    Also, select the appropriate Kudos box and click it for the person’s solution you accepted thank you.
    Ian H

  • Dreamweaver cs4, site management does not recognize image directory

    I have recently downloaded trial version. When I was trying to set up local site with site management tool, it somehow keep failing to recognize the image folder within. So I go to advance setting of edit and assign local root folder C:\favdoo\MyTheme\
    then I try to assign Default image folder which IS in the MyTheme folder, it dow not show up in the browser and even if I manually type in, gives me error message "there are not image file". I have checked rebooted, clear cache, but still does not recognize image folder. ????? Can anyone please help? It drives me crazy before I even start using dreamweaver.

    got it, needed to create images directory to associate with actual file......how I supposed to know that?

  • Webcam failure where the "device manager does not recognize the hardware"? Pavilion dv7 Win 7

    I have done everything the website suggests. Nothing worked. Has anyone gotten satisfaction to the issue either by a fix or a service center repair? I have seen others with the same problem accross different operating systems.

    Ha Ha. I'm replying to my own post!
    Solution.... If your laptop does not recognize the built-in camera at all in the device manager and your warranty has expired or your willing to void your warranty.  You can see if you have the same problem as I had. Gently pry the plastic frame around your camera and display screen apart you need to go at least half way down the sides. There is also some adhesive tape you will need to push to one side or the other. To the right of the camera there is a very small connector, it wont even look as if it is separated. Use a tweezer or small screwdriver to push the connector into the socket. This fixed my problem ...The next startup recognized the camera and has worked perfectly since. In my opinion (13yrs experience in reliability engineering semiconductor manufacturing) this is a manufacturing reliability issue either the socket cannot hold the connector in place or there is too much strain on the wiring to the connector. Good luck.

  • 8830 & Desktop Manager does not recognize Outlook Express 2000, cannot sync

    I just installed Desktop Manager 5.0 and connected to my BB 8830.  I use Outlook Express 2000 for calendar and I want to sync it with my BB 8330.  However, in Desktop Manager under Sync / Config / Select Device for calendar, the only choices are Yahoo and Import/Export Text.  Obviously it is not recognizing Outlook Express 2000 as a calendar program.  Does anyone have a solution?
    I bought this 8830 mainly to sync its calendar with my Outlook Express calendar.  If it does not work, then I am going to return it to my cell phone carrier.
    Solved!
    Go to Solution.

    Hi and welcome to the forums!
    Outlook 2000 has not been supported since Desktop Manager 4.2.
    KB14763 Unable to select Microsoft Outlook 2000 from the list of applications for synchronization
    I would check on Outlook 2003, still supported by MS and the cheapest version still available.
    Thanks,
    Bifocals
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Desktop manager does not recognize Outlook 2003.

    Hello everyone, 
    We have an Exchange server but use POP3 accounts individually on the users also.
    I have installed this software (desktop manager) many times with other clients and never had an issue. 
    On this particular user using Blackberry 9550 v5.0.0.713 I have installed and then uninstalled desktop manager 6.0 because it saw that we had Exchange and automatically assumed Enterprise Server was present, when I chose not to use Enterprise account, it did not see Outlook as a choice to synchronize with. 
    I then removed 6.0 removed user settings, restarted and installed Desktop Mangager 5.01 sp1.  I chose the option for personal mail.  The synchronize configuration still does not list Outlook as a choice to configure.  
    Has anyone else run into this?
    I found a post that said to make sure that Wireless Sync is off and it is.
    Help please,
    Jeanne 

    Hey giaierj,
    Welcome to the BlackBerry Support Community Forums.
    Have you tried performing a detect in repair in Microsoft Outlook?
    For more information about Detect and Repair: www.blackberry.com/btsc/KB02403
    After you perform this step, then try to setup the synchronization.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • Desktop Manager does not recognize my phone

    I just got my new BB 8330 from Sprint on Saturday.  Last night I made an attempt to get my phone conncect to my computer and started off by downloading the Desktop Manager from the CD that was included with the phone.  After the download, I attempted to connect my phone via the USB cable.  The phone would only show it was connected for a few seconds then the connection ICON would disappear.  After about 12 attempts of unplugging and plugging it back in, the connect ICON stayed up (this happens everytime I try to connect the USB cable).  I then went to Desktop Magager, but  no luck.  I would not recognize my phone.  I then thought I would reinstall the most recent version (V4.7) but that still did not work.  I am just stumped and as you well know, Sprint Support is not exactly the most helpful.    Just to give you a lil background on my equipment, I will provide the following: 
    Spring BB 8330, v4.3.0.127, platform 3.1.0.73
    Windows Vista 32 Bit

    Ok, let me ask someone this....  If I can connect my wifes BB Pearl and the Desktop Manager sees that phone, does that mean something is wrong with the USB connection in my phone?  Is there a setting on my phone I should be checking?  PLEASE HELP.... 
    Thanks,
    Tim

  • Desktop Manager does not recognize applications needing updates

    My BB 9800 shows that several of my loaded applications have updates available, but the DM does not show the "+" icon for updating, it only shows the "x" icon for deleting.
    How can I get the DM to recognize these applications that need upgrading?  I have +20MB worth of applications to upgrade and I don't want to burn all that data off my plan.
    Thanks,
    Richard

    Hi Richard
    Did you install these applications via BlackBerry® App World?  If so, plug in your BlackBerry® smartphone to your PC and go to www.blackberry.com/appworld to sign into BlackBerry® App World.  You can then access My World and update all of your applications this way as not to use up any of your data plan.
    Thanks!
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Desktop manager does not recognize my device

    I am running Vista Ultimate 64-bit. No matter what I do, Desktop Mgr (v4.7) will not recognize my device. No device PIN# shows, only "USB" as a connection. I cannot reload my OS. I have a 507 "windows od death error".

    Open DTM and connect your BB via USB cable, then in desktop go to options and click on detect and look what it has there, if everything is ok go to main menu DTM and click on sync then on to config sync settings, make sure all is correct there, failing that in options you can check you setting in connections and PIN# are entered there.
    When you accept a solution from anyone could you please select the appropriate box.
    Also, select the appropriate Kudos box and click it for the person’s solution you accepted thank you.
    Ian H

  • Facetime does not recognize username or password on ipad2 with ios6

    I have an email based user id. After I installed ios6, facetime started not to accept my username or password. My apple id and password work everywhere in apple but facetime.
    Is there a problem with their servers?
    It seems from forums this is such a recurring issue.
    I tried all i could find with no luck.
    I reset my password, checked my apple id details. All fine yet facetime does not accept anything.

    Hi Friend,
    First, Where are you located and what country did you buy your phone?  Some countries have restricted facetime, ie middle east, UAE.
    Check if you signed in Facetime with your Apple ID and password (Settings>>Facetime).
    Check if you have signed iCloud in.
    Check that FaceTime is not disabled in general/restrictions. If that isn't the problem try changing dns servers on your iPad.
    Go to Contacts app and select the person you want call then tap Facetime.
    Change your address for your currently location. If not works, change it for your native country.
    If not works, check if the person who you are trying to Facetime has signed in his/her Facetime too.
    Most of times the Facetime calls work calling from your friend's email address instead of mobile number. So try to call your friend both ways (his/her mobile number and his/her email address).
    If still not working:
    1. Go to the Settings App.
    2. Tap on Wi-Fi
    3. Your chosen network will be ticked. Tap on its white arrow over a blue circle button to its right
    4. Tap on DNS
    5. Replace the current information with 8.8.8.8,8.8.4.4
    6. Try visiting a website with Safari to see if this works
    7. Try registering iMessage / FaceTime
    If still not working, go to Settings -> General -> Date & Time -> Set Automatically: ON (Yes date time setting has been known to cause issue).
    Hope it will be helpful

Maybe you are looking for

  • How to pass the value dynamically in exp/imp utilities of oracle

    I want to pass the value of org_grp_i dynamically,instead of passing the value 19.Can you please tell how to write the script to this exp fas/xxxxxx@fasbd001 file=audit_grn_28aug.dmp tables=audit_grn query=\"where org_grp_i=19 \" where xxxxxx is the

  • S.M.A.R.T. failed on main internal drive, is my disk dying?

    Hi, Wanted to repair permissions before updating to 10.6.8 only to find a red message saying my main internal disk is damaged beyond repair, s.m.a.r.t checkup has failed. I was able to repair damages on the HD with disk utility but not the media driv

  • Text objects don't snap properly

    Has anyone noticed that text objects (and in particular point text objects) don't snap properly to guides even if Type Object Selection by Path Only is checked in Preferences? I'm on CS2 but on older versions of Illy this was never a problem. The obj

  • IDOC'S - useful material - urgent

    Dear sap gurus pls. send me some material on idocs. what it is all about. till what extent as a SD consultant should i have exposure on this. and  ALE's (applcation. link enablg.) also. my email id. [email protected] advance thanks.

  • Moving pictures, rather than copying pictures.

    Using the Blackberry Desktop Manager, I have been trying to move my pictures from my phone to the desktop. I use Media>Media Manager Within "My Devices", I select the images that I would like to move. There are four prompts: Copy Up, Copy Down, Move