Digitized clips not showing up in bin???

I'm new to fcp (4.0). When I "capture" video it suddenly "isn't" going into my browser/bin - it's going strait to scratch drive instead??? I can import the clips back to the bin, but that's a pain in the ***. I can't seem to find any browswer/bin preferences that may control this!!??

I have a similar problem...but I don't get the first few minutes of video. On my iMac screen, I get that the camera is recognized and blue screen. It tells me onscreen when I am "playing" or "seeking forward" etc., but when I try to "import" though, the "import" button no longer works (it worked 1/2 hour before this). I've plugged and unplugged the firewire cords, turned off the camera, checked the tape, etc. To me, it seems to be a software issue. I just tried it on our Intel Macbook Pro and I have no problem importing the video.
The problem seemed to happen after I imported about 8 minutes of video this morning and then when I stopped it gave me a message I've never seen before (something about "organizing video clips") which like the "letterboxing" message seemed to take forever. Under a time crunch, I attempted to quit iMovie during this organizing process. It didn't happen right away, so I went on to do something else. When I returned, it gave me the options of quitting, saving or canceling. I opted to cancel and continue to import. At that point, however, the import button no longer worked.
I work at a university, so I don't have the install disks myself and wonder if anyone else has had this problem and been able to work around it without reinstalling the software. (I can contact our IT people, but it's a real pain and very time consuming to get them here to reinstall...plus, they are not "Mac people" so they like to give me a lot of c.r.a.p. about how PCs don't have this or that issue...sigh).
Thanks!
Sally

Similar Messages

  • Good will hunting digital copy not showing up on apple tv

    I downloaded and redoes loaded good will hunting digital copy, included in my bluray.
    Well for some reason, good will hunting won't show up on my apple tv as purchased like other movies do.
    I know fox/universal digital copies won't work for now, but why doesn't good will hunting show up?
    It's a miramax/lions gate film.
    Any help would be appreciated.

    Same problem here, (and I know exactly what you are talking about). 
    So as directed by AppleCare Technical Support (I have AppleCare on all my Apple products), I sent the following e-mail to the iTunes support page that they directed me to, "All my other successfully redeemed digital copies/digital downloads through iTunes/iTunes store show up in my iTunes purchased movies in the cloud, except this one, "Good Will Hunting."  I got the same message from the iTunes store saying it was successfully redeemed and it downloaded to my iMac but for some reason this is the only movie that is not showing up in my iTunes purchased movies in the cloud and all my other successfully redeemed digital copies/digital downloads are, so I don't know what the problem is at this time.  I hope you can resolve this so that I may enjoy this one from the cloud as I do all my others like this, thank you in advance so very much." 
    I am suppose to hear back from them within 24 hours, I hope it is resolved ASAP.  If I can I'll try to let you know what happens.

  • Clips not showing up on NTSC monitor when editing

    I have a Sony DSR-11 and Sony NTSC monitor connected to my computer.The clips are not showing up on the monitor when I am editing. They show up when I am in Log and Capture. Is there anything I can do to get this to work again?
    Thanks

    Start with the basics.
    View> video playback > apple firewire ntsc (or pal if you swing that way)
    View> external video > all frames
    View> external audio > audio follows video
    View> refresh all devices
    x

  • Clips not showing up in iMovieHD

    Brand new to iMovie...I'm ding everything correctly but clips are not showing up in either place...movie is playing on camera but not on iMovie screen. I do get some minutes of the beginning of the movie on screen(iMovie) but then it goes Blue and says 'Camera is playing'. At end of movie I was expecting iMovie to fill-in all the clips.
    Does it fill in clips as it's played? I want the whole movie captured. All connections are correct. Even the Magic Movie does not capture the clips...cannot understand it. Anyone have any tips on getting this movie made?
    Thanks in advance!

    I have a similar problem...but I don't get the first few minutes of video. On my iMac screen, I get that the camera is recognized and blue screen. It tells me onscreen when I am "playing" or "seeking forward" etc., but when I try to "import" though, the "import" button no longer works (it worked 1/2 hour before this). I've plugged and unplugged the firewire cords, turned off the camera, checked the tape, etc. To me, it seems to be a software issue. I just tried it on our Intel Macbook Pro and I have no problem importing the video.
    The problem seemed to happen after I imported about 8 minutes of video this morning and then when I stopped it gave me a message I've never seen before (something about "organizing video clips") which like the "letterboxing" message seemed to take forever. Under a time crunch, I attempted to quit iMovie during this organizing process. It didn't happen right away, so I went on to do something else. When I returned, it gave me the options of quitting, saving or canceling. I opted to cancel and continue to import. At that point, however, the import button no longer worked.
    I work at a university, so I don't have the install disks myself and wonder if anyone else has had this problem and been able to work around it without reinstalling the software. (I can contact our IT people, but it's a real pain and very time consuming to get them here to reinstall...plus, they are not "Mac people" so they like to give me a lot of c.r.a.p. about how PCs don't have this or that issue...sigh).
    Thanks!
    Sally

  • Clips not showing up in project

    I recently upgrade to FCE 2. I like the "capture now" option when capturing. The only problem is when i import clips they do not show up in the browser after capturing. They are imported into the proper scratch folder but i have to import them into the project for them to be in the browser. How can i get the clips to immediatley show up in the browser.
    Thank You in advance

    Make sure you're using v2.0.3. Trash your preferences and make sure you only have one project open at a time, and the browser is the active window, when you open the capture window.

  • Clips not showing up

    I have built movies in iMovie06 that work great. Just got iMovie08
    but when I try to open movies already created in iMovie06 the only thing
    that shows up are titles. No quicktimes or clips.
    Any idea why they are not showing up?

    Make sure you're using v2.0.3. Trash your preferences and make sure you only have one project open at a time, and the browser is the active window, when you open the capture window.

  • Selecting Clips, adding keyword, selected clip not showing up in keyword collection

    I am having issues while editing a soccer game for a highlight reel.  I have done this many times without issue, but with one project, for certain keyword selections, it is not showing up.  I am selecting a clip from a longer piece of game footage, then hitting command-k to open the keyword collection shortcut interface.  I'm inputting the keyword into it and hitting return.  It makes the sound like the clip has been marked as a key word, but when I go into the keyword collection in the event history, the clip is not showing up.  Again, this is only occuring in one project and hasn't been an issue in the 10 other similar projects I've done.  Any thoughts?  Is there any way to fix this recoding the entire game? Thanks.

    There shouldn't be any sound, just the animation and the blue bar. Are you getting that? Make sure there is nothing in the search field in the browser. Try trashing prefs.

  • Photoshop elements 12 photos not showing in edit bin

    I am having problems with photos not showing up in photoshop elements 12 bin. I can select the photo and when I press the edit with photo elements editor still nothing. I tried resetting, redueing everything etc. Still nothing. Also likes to freeze can someone please help me get this to work. I had this set up for months where it worked and now it is not doing andything at all. Not sure why

    What happens when you open the file by going to:
    File >> Open
    You do this by first launching the PSE Editor and then going to:
    File >> Open
    Please post back.

  • Western Digital drive not showing up in disk utility--Help please.

    Hello all. This is my first post. I am having trouble with my WD 500GB external hard drive. It is not showing up in disk utility when connected either via the firewire or USB ports. I purchased the drive about 8months ago, brought it home and set it up as my Time Machine backup drive. It worked great for several months, until it got full. Then it stopped showing up on the desktop for no apparent reason. I discovered through reading support documents on the Apple web site that when I set the drive up initially I should have changed the partitioning protocol from master boot record to GUID, but I did not. I followed the apple web site instructions for making the change expos facto, but was instructed to press buttons that were "grayed out". As such, I couldn't do it. Perhaps foolishly, I thought that I would just start all over by reinitializing it, formatting it correctly (with my new found knowledge) and then do the time machine backup fresh. However, the drive no longer shows up in disk utility no matter how or in what order I connect it. When the drive is connected by firewire there is evidence of some recognition of the drive in system profiler, but it is listed as "External HDD Buttons and Lights". There is also evidence of the My Book showing up at a minimal level (eg. the firmware revision and a few other details are listed). On the front of the drive is a ring of blue lights that progress in a clockwise direction as soon as a connection is made via either firewire or USB. Before that it is solid blue. I have read through all the info that I can find on this site, and all the suggestions require the drive being recognized in disk utility. Without that, I am stuck. I know this must be a solvable problem, because the drive just a bucket of parts before it was manufactured. I just don't know enough to solve the problem or even know what qeustion to ask. I would really appreciate some help. Thanks in advance, and sorry for the long post.

    If you can't boot from an OSX DVD, it sounds bad. Yet I think you said you were running Disk Utility from the DVD?
    I got an external Firewire drive enclosure for 2.5 inch IDE drives from Other World Computing (OWC)
    http://eshop.macsales.com/item/Other%20World%20Computing/MOTGFW400/ but similar items are available from many vendors like Newegg. About $60 for the basic model. More money can buy additional interfaces on the enclosure like FW800 and USB2; an AC adapter instead of letting the firewire bus power the drive (usually OK).

  • Help? my passport for mac (western digital) does not show up on Lion desktop, shows up on older laptop

    My new Passport for Mac portable hard drive does not show up on the desktop. when connected to another computer the icon shows up on the desktop.  When i first connected it it asked do you want to connect to time machine?  I said "later"or "no" because I wanted to research how to use it first.  NOw it doesnt show up at all... except in the disk utility section.  Please help.  I am going on a trip and need to have the storage for films.  THanks!

    Do you see it in the sidebar of a Finder window, under "DEVICES"?

  • Digital signature not showing in PDF when opened and printed with Preview

    Not being able to find anything after searching high and low, I thought I would try my luck here: when I certify a PDF file using a visible signature in Adobe Acrobat Professional that signature does not show when I open the file in Preview or print it from Preview. Preview's Inspector information also claims that I can make changes, which I instructed Adobe not to allow.
    Thanks for any feedback on this!

    Try re-uploading the PDF and then updating the course. Sometimes the conversion doesn't take and the tracking doesn't apply correctly to a PDF.

  • Imported clips not showing up in Event

    I have version 10.0.5 and imported video clips from my iPhone.  The file size shows 9.5GB yet no clips are showing up.  They were in the Event prior to my quitting iMovie but when I reopened it shows Empty.  Help?

    I think I ought to mention that I also have a new laptop and have experienced file sharing permission issues with some applications. Might this be part of the problem? (Although everything seems to be properly owned!)

  • After effects color corrected clip not showing correctly in Premiere

    Hello all,
    I have recently made a short film with a few effects in Premiere and After effects CS4.  I have used the Dynamic Link to accomplish this.  I have added color correction with Color Finesse in After effects.  The problem is I some of the color correction is not showing up in Premiere once it has finished.  Some of them are adjustment layers and some are not and the ones that are showing up are diverse like that as well.  I have rendered the footage and rendered the premiere time line, it fixes it at first but won't build a DVD the right way then the fixes just seem to disappear when scrolling through the timeline.
    Is anyone else haveing this problem?
    Do you think it's something wrong that an update will fix?
    Maybe a new codec?

    Describe the exect DL steps you took.

  • All clips not showing up in logging bin

    the setup:
    MacPro 2 x 2.66 GHz Dual-Core Intel Xeon
    4GB RAM
    OS 10.4.10
    Fibre Channel to 2 Media Vaults
    FCP 6.0.1
    The problem:
    We shoot HVX200 to P2 DVCPROHD 720p.
    When doing the log & transfer to ingest,
    only a few clips out of several are showing up in my bin.
    The QTs are being created and show up as captured media on the Media Vault, but only a random few show up in my bin in FCP.
    I always set logging bin, I've trashed prefs, and repaired permissions. The workaround is to simply import the clips after they've been converted to QT, but it's a real pain.
    Anyone seen this before and have a solution?
    Thanks in advance.

    I have a similar problem...but I don't get the first few minutes of video. On my iMac screen, I get that the camera is recognized and blue screen. It tells me onscreen when I am "playing" or "seeking forward" etc., but when I try to "import" though, the "import" button no longer works (it worked 1/2 hour before this). I've plugged and unplugged the firewire cords, turned off the camera, checked the tape, etc. To me, it seems to be a software issue. I just tried it on our Intel Macbook Pro and I have no problem importing the video.
    The problem seemed to happen after I imported about 8 minutes of video this morning and then when I stopped it gave me a message I've never seen before (something about "organizing video clips") which like the "letterboxing" message seemed to take forever. Under a time crunch, I attempted to quit iMovie during this organizing process. It didn't happen right away, so I went on to do something else. When I returned, it gave me the options of quitting, saving or canceling. I opted to cancel and continue to import. At that point, however, the import button no longer worked.
    I work at a university, so I don't have the install disks myself and wonder if anyone else has had this problem and been able to work around it without reinstalling the software. (I can contact our IT people, but it's a real pain and very time consuming to get them here to reinstall...plus, they are not "Mac people" so they like to give me a lot of c.r.a.p. about how PCs don't have this or that issue...sigh).
    Thanks!
    Sally

  • Clips not showing up in list view

    MacBook Pro 10.7.1 Lion - Whenever I click on list view my clips don't show up. When I click back on filmstrip view final cut x crashes. This doesn't happen on my MacPro Desktop.

    Have you tried trashing your preferences?
    Faults like this can sometimes be fixed by clearing out FCP X's preferences (for some reason, they get knotted up from time to time).
    Download Digital Rebellion's Preference Manager (free, simple to use, and quite safe).
    With Pref Manager, you can backup the Prefs first, then if trashing makes no difference, you can restore all your settings.
    If you trash them and don't restore them, you will need to go over your FCP X settings again, so it's a great idea to backup Preferences from time to time when FCP X is working well, then you can ditch the bad prefs and restore from your (Digital Rebellion) backup.
    It's worth a try otherwise, there is some conflict.
    I suggest you create a new user account on the problem machine and see whether FCP X works OK from there.
    What codec is the problem clip?
    Andy
    Message was edited by: andynick

Maybe you are looking for