Digitized vinyl and photographed artwork..... please help
Hello all. I have been digitizing some vinyl and have successfully imported them into iTunes and filled in the song titles, albums, genres, etc into the appropriate boxes (just like a spreadsheet). I have photographed the album covers and put them into my iPhotos. I have attempted to drag and drop the artwork into the iTunes but it doesn't work. I tried numerous ways. I tried making the photo smaller, putting it on my desktop and then dragging it from there. No workie. I also went into the file-get info section and tried putting the artwork there. No work either. Can anyone help?
I've had a few isolated cases over the years where for an unexplained reason
I couldn't add artwork in Tunes. At this time, however, I'm able to add art to
tracks whether they are .aiff, MPEG (mp3) or Purchased AAC audio in iTunes
10.6 under Mac OS 10.6.8. The program is accepting .jpg, and png files with
impunity, for whatever reason, but this is the norm and I remember how odd
it was to encounter the difficulty you're experiencing. If I were you I'd perform
the normal tuneup routines and try again. If no luck perhaps someone will
have an idea. Good luck.
Similar Messages
-
PLEASE HELP when I upgraded to the new firefox my old one got deleted which had all my stuff and my mac is only 10.4.11 and wont work please help!!!
Need to Resume download to complete the ongoing Process.
Last Resort, put the iPhone in DFU mode (Google How to do that). Connect in iTunes. Follow on-screen prompts to Restore. All Data would be lost, if not backed up earlier.
To save the photographs you may have to use third party software. Google is your friend. -
My appstore wont let me download anything. It says i have to agree to the terms and i agree and again it pop up the same thing over and over! Please help me
I thought i was the only one!! but its happening on my ipad! and i dont even want to try on my iphone uhhh its annoying!
-
"Connect to iTunes to Use Push Notifications" comes almost in every app that I open and it does not notify me when I got message in Whatsapp and Viber. Please help me to overcome it, it is becoming quite annoying!
Did you get any help on this? From what I can see from surfing this site, it's a BUG that no one has offered a solution to. It sometimes happens after a 'reset' and going to ITunes does not offer a way to 'set up push notifications'.
-
I have an itunes account on my home PC. I want to use my same account but on my laptop. How do i do this with out wiping out my phone and backing up all my Pictures and Apps? Please Help.
Copy everything from the old computer or your backup copy of your old computer to your new one.
Type "move itunes library from pc to mac" or similar into the google search bar. -
I'm having multiple crashes on my new 5s. I can't connect to my Mac Pro!! Power cord broken. How can I fix this without connecting to my MacBook? Very frustrating and disappointing. Please help!!!
Hi there Rlong50,
You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
-Griff W. -
I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi
Plawexki wrote:
... do you know if the contacts, photos, messages etc will be wiped?
Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/
You may find this information of interest...
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer -
iPhone 4 went into recovery mode when trying to restore it. Now the only option iTunes allows is for "restore & upgrade", it is not offer an option to restore from a backup, says that must first do the upgrade, when attempting to do the upgrade the iPhone won't accept it.
How can I restore from a back up in recovery mode when the only option is "restore and upgrade"?
Please help.You don't you must restore your phone first and then you will have the option to restore from your backup.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support -
My iPod shuffle will not turn on, nor is it recognized by the computer to pull up iTunes. I have order new USB cords and nothing. Please help! Not sure of the generation of iPod shuffle, I think 3rd.
first: why did you download the iOS Beta 8? If you are a developer, go to the Apple Developers website and check what they can do for your case.
second: setup an appointment to a Genius Bar for service. -
I need to pass a query in form of string to DBMS_XMLQUERY.GETXML package...the parameters to the query are date and varchar ..please help me build the string .Below is the query and the out put. ( the string is building fine except the parameters are with out quotes)
here is the procedure
create or replace
procedure temp(
P_MTR_ID VARCHAR2,
P_FROM_DATE IN DATE ,
P_THROUGH_DATE IN DATE ) AS
L_XML CLOB;
l_query VARCHAR2(2000);
BEGIN
l_query:= 'SELECT
a.s_datetime DATETIME,
a.downdate Ending_date,
a.downtime Ending_time,
TO_CHAR(ROUND(a.downusage,3),''9999999.000'') kWh_Usage,
TO_CHAR(ROUND(a.downcost,2),''$9,999,999.00'') kWh_cost,
TO_CHAR(ROUND(B.DOWNUSAGE,3),''9999999.000'') KVARH
FROM
(SELECT s_datetime + .000011574 s_datetime,
TO_CHAR(S_DATETIME ,''mm/dd/yyyy'') DOWNDATE,
DECODE(TO_CHAR(s_datetime+.000011574 ,''hh24:'
||'mi''), ''00:'
||'00'',''24:'
||'00'', TO_CHAR(s_datetime+.000011574,''hh24:'
||'mi'')) downtime,
s_usage downusage,
s_cost downcost
FROM summary_qtrhour
WHERE s_mtrid = '
||P_MTR_ID||
' AND s_mtrch = ''1''
AND s_datetime BETWEEN TO_DATE('
||P_FROM_DATE||
',''DD-MON-YY'') AND (TO_DATE('
||P_THROUGH_DATE||
',''DD-MON-YY'') + 1)
) a,
(SELECT s_datetime + .000011574 s_datetime,
s_usage downusage
FROM summary_qtrhour
WHERE s_mtrid = '
||P_MTR_ID||
' AND s_mtrch = ''2''
AND s_datetime BETWEEN TO_DATE('
||P_FROM_DATE||
',''DD-MON-YY'') AND (TO_DATE('
||P_THROUGH_DATE||
','' DD-MON-YY'') + 1)
) B
where a.S_DATETIME = B.S_DATETIME(+)';
SELECT DBMS_XMLQUERY.GETXML('L_QUERY') INTO L_XML FROM DUAL;
INSERT INTO NK VALUES (L_XML);
DBMS_OUTPUT.PUT_LINE('L_QUERY IS :'||L_QUERY);
END;
OUTPUT parameters are in bold (the issue is they are coming without single quotes otherwise th equery is fine
L_QUERY IS :SELECT
a.s_datetime DATETIME,
a.downdate Ending_date,
a.downtime Ending_time,
TO_CHAR(ROUND(a.downusage,3),'9999999.000') kWh_Usage,
TO_CHAR(ROUND(a.downcost,2),'$9,999,999.00') kWh_cost,
TO_CHAR(ROUND(B.DOWNUSAGE,3),'9999999.000') KVARH
FROM
(SELECT s_datetime + .000011574 s_datetime,
TO_CHAR(S_DATETIME ,'mm/dd/yyyy') DOWNDATE,
DECODE(TO_CHAR(s_datetime+.000011574 ,'hh24:mi'), '00:00','24:00', TO_CHAR(s_datetime+.000011574,'hh24:mi')) downtime,
s_usage downusage,
s_cost downcost
FROM summary_qtrhour
WHERE s_mtrid = N3165 AND s_mtrch = '1'
AND s_datetime BETWEEN TO_DATE(01-JAN-13,'DD-MON-YY') AND (TO_DATE(31-JAN-13,'DD-MON-YY') + 1)
) a,
(SELECT s_datetime + .000011574 s_datetime,
s_usage downusage
FROM summary_qtrhour
WHERE s_mtrid = N3165 AND s_mtrch = '2'
AND s_datetime BETWEEN TO_DATE(01-JAN-13,'DD-MON-YY') AND (TO_DATE(31-JAN-13,' DD-MON-YY') + 1)
) B
where a.S_DATETIME = B.S_DATETIME(+)The correct way to handle this is to use bind variables.
And use DBMS_XMLGEN instead of DBMS_XMLQUERY :
create or replace procedure temp (
p_mtr_id in varchar2
, p_from_date in date
, p_through_date in date
is
l_xml CLOB;
l_query VARCHAR2(2000);
l_ctx dbms_xmlgen.ctxHandle;
begin
l_query:= 'SELECT
a.s_datetime DATETIME,
a.downdate Ending_date,
a.downtime Ending_time,
TO_CHAR(ROUND(a.downusage,3),''9999999.000'') kWh_Usage,
TO_CHAR(ROUND(a.downcost,2),''$9,999,999.00'') kWh_cost,
TO_CHAR(ROUND(B.DOWNUSAGE,3),''9999999.000'') KVARH
FROM
(SELECT s_datetime + .000011574 s_datetime,
TO_CHAR(S_DATETIME ,''mm/dd/yyyy'') DOWNDATE,
DECODE(TO_CHAR(s_datetime+.000011574 ,''hh24:'
||'mi''), ''00:'
||'00'',''24:'
||'00'', TO_CHAR(s_datetime+.000011574,''hh24:'
||'mi'')) downtime,
s_usage downusage,
s_cost downcost
FROM summary_qtrhour
WHERE s_mtrid = :P_MTR_ID
AND s_mtrch = ''1''
AND s_datetime BETWEEN TO_DATE(:P_FROM_DATE,''DD-MON-YY'')
AND (TO_DATE(:P_THROUGH_DATE,''DD-MON-YY'') + 1)
) a,
(SELECT s_datetime + .000011574 s_datetime,
s_usage downusage
FROM summary_qtrhour
WHERE s_mtrid = :P_MTR_ID
AND s_mtrch = ''2''
AND s_datetime BETWEEN TO_DATE(:P_FROM_DATE,''DD-MON-YY'')
AND (TO_DATE(:P_THROUGH_DATE,'' DD-MON-YY'') + 1)
) B
where a.S_DATETIME = B.S_DATETIME(+)';
l_ctx := dbms_xmlgen.newContext(l_query);
dbms_xmlgen.setBindValue(l_ctx, 'P_MTR_ID', p_mtr_id);
dbms_xmlgen.setBindValue(l_ctx, 'P_FROM_DATE', to_char(p_from_date, 'DD-MON-YY'));
dbms_xmlgen.setBindValue(l_ctx, 'P_THROUGH_DATE', to_char(p_through_date, 'DD-MON-YY'));
l_xml := dbms_xmlgen.getXML(l_ctx);
dbms_xmlgen.closeContext(l_ctx);
insert into nk values (l_xml);
end; -
The enter key is not working in firefox but it has working fine in chrome and IE so please help me to rid out from this.
Hello gokulaan, '''try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
I try to access the itunes store and my bar goes halfway and stop. Please help
I am trying to access the Itunes Store and my bar goes halfway and stop.
Please help.Is it endlessly saying "Accessing iTunes Store"? Or is something a bit different going on?
-
By mistake I uninstalled my Acrobat someting, which gave me the opportunity to print .pdf and color-mark text. My licence key is [removed by moderator - never disclose publicly]. What is the name of the product? Where is the link for download and reinstall? Please help me rapidly, Best regards / Stefan
Sign in to your Adobe account online and look in the Plans/Products sections to see which program it might have been.
-
I received a replacement iPad. On my original iPad I had dozens of books and PDF's. I completely backed up my original iPad. The categories of my iBook files transferred but NOT the actual PDF and Books. Please help.
Are the PDFs and ibooks on your computer's iTunes ? If so then you should be able to re-sync them, if not then you can re-download ibooks for free as long as they are still available in the store and you use the same iTunes account as you originally used to buy them : http://support.apple.com/kb/HT2519 . The backup doesn't contain the contents of the ibooks app, so for them to be restored to the device they needed to be in your iTunes library.
-
One particular song wont play and was playing earlier and now skips please help
one particular song wont play that could play earlier and now skips please help
i would delete and re download it from itunes if you purchased it form them
Maybe you are looking for
-
Subquery returned more than one value
Hi, I have this statement which has been working fine - not I get a 'Subquery returned more than one value" error: SELECT 'WAS3' AS 'Rec ID', E.EecEEID AS 'Emp ID', eepNameFirst AS 'First Name', eepNameLast AS 'Last Name', EecDateOfOriginalHire AS 'S
-
Re: Can't increase monthly payments online
SORRY HAD TO COME THROUGH YOUR POST TO ASK QUESTION DONT REALLY UNDERSTAND HOW TO USE FORUM . ANYWAY 6 JUNE CONTACTED BT ABOUT CHANGING BILL DATE FROM 22 TO 30 OF MONTH SAID I COULDNT DO IT COS I PAY IN FULL EVERY MONTH ANYWAY THEY SUGGESTED I CHANGE
-
Permissions Randomly Disappearing/Reverting in SharePoint 2010
Hi everyone, A couple of our SharePoint team sites have been experiencing an unusual phenomenon where user permissions randomly disappear or revert--all seemingly without any user involvement. I have inspected the Security Audit Logs for the past mon
-
Using Field values as part of PDF output file
Hello, I was wondering if it is possible to use information in the *.dat file to create the name of the *.pdf file which will be sent (by email) to our customer automaticly. So let say there is a field "GLOBAL ORDNO" with a value "1042193" in the dat
-
Import psd with layer groups in AE CC - "Retain Layer Sizes" not working
Hi All,I created some shape layers in Photoshop and grouped them separately. Then imported this psd file into AE. I checked "Retain Layer Sizes" however all the layer-groups have the same size bounding box as document size instead of at the layer siz