Digitizer not responding

hi when i changed my cover for my ipad2 the touch screen dosnt work at all whats going wrong please help me

Have you tried a soft-reset to see if it works after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Similar Messages

My digitizer is not responding however i have loads of imessages. I tried to go onto my ipod touch to look at them but when i updated to ios7 it had not been signed in to imessage. Is there a way i can get imessages sent to iphone to load on my ipod?

My digitizer is not responding however i have loads of iMessages which i can see because the lcd screen is visible but touchscreen is brokenI tried to go onto my ipod touch to look at them but when i looked it had not been signed in to iMessage which was after i received the iMessage on my iPhone . Is there a way i can get imessages sent to iPhone which i currently cannot access due to the touchscreen being unresponsive to load on my iPod iMessage which is connected to my phone number as well as my email?

maggielou wrote:
I thought that I had backed up my pictures to icloud, but when I looked online at icloud, I don't see pictures listed. However, a few of the recent pictures have shown up on my phone.
IHow could I get these from my MacBook to my phone?
Thanks again.
When you log into you icloud account on your computer you are viewing data that you sync to icloud not the backups. You can't view the backups.
Look at the two links I provided.
You still didn't answer any of my two questions I asked.

Digitizer not reponding correctly

I have a ipod touch 4g 8gb ,
I have fitted a new screen and it has been working perfect untill a few days ago ,
The bottom of the Digitizer isint responding as if im not pressing it ,
I have checked the digitizer ribbon cable and all looks good could this be a hardware error or a software error ?
Just for info it is NOT Jailbroken .
Thanks ,
Seán

Try the following to rule out a software problem:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem

During typing sporadically keys do not respond immediately.

Sometimes (not constant) when typing, the key does not respond immediately. If I wait 15-30 sec. Then it responds as we'll as additional keys I may have tapped. Also when attempting to save an email to a specific folder, I tap the "save" icon then in the left when I tap on the specific email account to get to th specific folder, the iPad 4 freezes momentarily and after a few seconds (5-15) it decides to continue. This doesn't happen all the time only intermittently.

Hi, and welcome to the Palm Community Forums.
It seems likely that your digitizer (which is the top portion of the screren which recognizes your stylus taps and converts them into commands) is failing, although there are things that you can try to diagnose it. One thing is to remove any screen protector you have installed, and see if the behavior continues. The second is to fold over the corner of a piece of paper and use the folded edge as a "scoop" by sliding it underneath the frame that goes around the screen. The idea is to pull out any dirt or grit that has accumulated under there over time, which can interfere with the digitizer's function.
If that does not remedy the problem, you can try one of several software fixes such as DigiFix which can help in some cases.
If none of that works, you might just be in need of a replacement digitizer. They can be found at www.pdaparts.com or www.usedpdaparts.com and you can either do the repair yourself, or they will do it for you at a reasonable cost.
All of these solutions, and more, are discussed in this lengthy thread in the Hardware board.
Good luck.
Post relates to: None
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

How can I fix my ipod if it does not respond to touch?

My ipod touch is not responding to touch, I cannot slide to unlock or slide to power off. It syncs and I have tried to restore and recover but it did not help and nothing has worked. PLEEEEEEAAAASSSEEE HEEEELLLP

Try holding the 'lock' and 'home' buttons at the same time for about 10 seconds until you see the Apple logo, but from what you said I don't think that will help. If it doesn't, your only course of action is to take it to the Apple store and hope that it's under warranty.
If not, you can always go to Amazon and buy a new screen and digitizer and try to replace it yourself. Nothing to lose (:

Q10 Send Mail Button not responding

Hi, i have a problem with exchange email account on my Q10,
when i want to send an email, i push on send button, but its not responding.
The meaning is that i can't send emails.
Please advise.
Best Regards
Gabby

Sometimes the Q10 screen is not responsive. The operating system might be pausing while background operations are being conducted, or the digitizer my just glitch. I've noticed some unresponsive behavior like this from time to time but it always sorts itself out quickly. I've also noticed that finger placement on the Q10 when using the touch screen can be a little dodgy. I often find I've selected a link on the screen just below what I intended. Minor alignment issue with the digitizer?

HT201406 My 2nd generation ipod touch screen is not responding at all is there anything i can do to fix this?

I let my cuzin borrow my ipod and when she gave it back the screen was not responding, my volume button is pushed all the way in and the lock button doesnt work very well. Is there anything i can do to fix it or anywere i can get it fixed?

well unfortunatley your warranty is over so the device is not covered, BUT sounds like you have interupting signals being sent from a stuck home button constantly being pressed and maybe even a digitizer problem (the touch screen). You can try to restore your ipod to your computer to see if it might be some kind of software related issue. Just restore to the last sync you have on iTunes. But FIRST...I would try to Reset your ipod.
Go to Settings>General>Reset> Reset all settings.

Unlocked iphone 4 from Belgium--screen not responding

I bought an Iphone 4 from Belgium (unlocked by law) last week. I tried to synch with Itunes without a SIM card (no micro SIM cards in Turkey yet). I disconnected phone from PC upon a message saying "no SIM, disconnect". Then I noticed that the screen (slider) is not responding at all. The Apple Center checked the phone and said the screen and digitizer could be defective. My question: Did I miss something? Could it be that w/o a valid SIM at the activation locked the screen? How can I check that I had purchased a defective phone or not?

I have found a valid SIM card, tried with it. It did not change anything. Then I flied to Brussels to the store I bought IP4. I explained to the Customer Service what I had experienced. They checked the device, confirmed that it seemed to be defective and it had to be sent to Apple Netherlands for repair, and I had to give them a Brussels address and waith for the result for 4-5 weeks. I objected to this situation. IP4 came defective out of the box and I was unable to do any operation on it except connecting it to Itunes and activating. I requested a replacement. Their response was "Since the phone is activated, we can not replace it as a rule". I insisted and spent almost an hour discussing with the store manager. I told them that I was misguided from the User Guide, messages on the IP4 screen and suggestions in this forum. (Sorry Wjosten, you were trying to help with good intentions...). Anyhow, at the end they replaced it.
My suggestions (from this story):
1. The User Guide and messages on the screen should be revised. Instead of "... insert a valid SIM card to activate the phone..", this should be used: "... in order to activate the phone FUNCTION, you should .....". In other words, I have learned that, even before activation, the slider on the bottom of the screen which says "slide to unlock" should be operational.
2. For people, planning to buy IP or any Apple product from another country, think twice and be careful and consider the risks. Mine was an unlucky case, but it costed me a lot. Also, at the end, my perception of the quality of Apple products are ruined. Apple is known to produce high-tech, high end and expensive devices. It is difficult to understand why Apple does not provide international warranty and why it exhibits very different customer services (In USA, it seems, it is very easy to replace a defective phone). I paid a significant amount (639 Euro) from a reputable store, and ended up with an unacceptable procedure (4-5 weeks wait time for repair) for an out-of-box defective phone..

I can't open firefox the running but not responding window opens and says to close the existing window. I can't do that shutting down the computer doesn't do anything to help. I've done all the suggestions here. I've uninstalled and reinstalled firefox

Firefox will not open. I get the firefox is already running but not responding window... I have tried rebooting with no help. I have tried to end the process via cntrl+shift+esc and nothing firefox is listed to end. I have tried find the app data via the run icon in the start up window, I have no run icon on this system (Acer with windows vista(?)
== This happened ==
Every time Firefox opened
== The computer was hard shut down and did a improper shut down scan when it was restarted ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; FunWebProducts; GTB6.5; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729)

I am having a similar problem. Running Xp.
Latest revision of firefox.
After using firefox for a while if I exit, parent.lock is locked and i have to reboot to reload firefox.
I have killed all firefox applications from task manager (usually there are none). and I have tried 3 different "file unlock" programs including unlocker to no avail.
I also recently installed a program that shows -all- open files, and parent.lock is not listed, and thus not closable/unlockable from there.

Frequently when I open Firefox it says Firefox is already running but is not responding. I have to go to the task manager, find Firefox and close the process before I can get firefox to load.

Those are all the details I have

There is an article about this problem see:
* [[Firefox is already running but is not responding]]

PCI DIO 32HS (6533) Suddenly giving "The device is not responding to the first IRQ level" error, and no longer functioning.

Greetings NI folks,
I'm an oceanographer, and have an sidescan sonar data aquasition computer running Windows XP SP2, and NiDAQ 7.0 (Legacy). For several years, this machine has worked flawlessly, but today, I booted it up to test the system for an upcoming job, and I got some strange errors in our sonar program. I tranced the problem to our NI-6533 PCI-DIO-32HS card. I launched NI Automation Explorer to test that the card was responsive, and when I click the "test panel", I get an error: "The device is not responding to the first IRQ level." Continue (yes/no). If I click yes, I can test the digital i/o's, but nothing happens, and all the tests fail (nonresponsive). I tried moving the card to another PCI slot, tried forcing it to have a specific IRQ that was unused by anything else, and finally tried moving it to another computer that had never been used with the DIO card. I'm still getting the error, and the card is nonresponsive. I'm at the limit of my abilities, and would like to know if there's anything else I can do, or should we send the card back to NI for repair/diagnosis.
Thanks.

Duplicate Post
Best Regards
Hani R.
Applications Engineer
National Instruments

IPod not recognized by iTunes. Also iPod seems disabled/locked showing "do not disconnect". Not responding to anything. Any help please.

My iPod is not being recognized by iTunes. iPod seems disabled and not responding to anything. Permanently on "do not disconnect". Not sure what to do.

Hello,
My iPod is not being recognized by iTunes or internet
explorer. It used to, but not anymore. It just
dosent show up when I connect it to my computer.
Also, the "do no disconnect" sign does not appear on
my iPod when I connect it. It is still able to
recharge, though.
have u tried a different usb port?
I read that I have to restore it. I have tons of
songs in my iPod that I do NOT want erased! How can
I back these songs up? I have some songs on my iPod
that are from another person's computer, so if they
get erased, the songs are gone forever.
try this http://www.copypod.net/
Nano 4GB black|Moto RAZR V3 black| PSP| all kinds of cases for nano|radio/remote Windows XP <img src="http://i36.photobucket.com/albums/e13/superman5656/c.jpg" ="right"

I just updated itunes to 11.1.3 on my laptop and now it won't open. It does not respond to trying "safe mode" either.

I just updated itunes to 11.1.3 on my laptop and now it won't open. It does not respond to trying "safe mode" either. Anyone have an idea as to what to do?

I just uninstalled it and am waiting for it to reinstall. I sincerely hope that I have not lost everything that I worked on so hard. Now that mobile me is gone, I have not been able to go between devices to transfer things. I was merely trying to take a document I had worked on and open it in pages, but it said my version was too old. When I updated, it wouldn't load. Now I cannot do anything. I hope that the reinstall fixes it without losing everything. Please advise!!! Yes, I am in panic mode.

"Update server not responding" when trying to update Acrobat 9 Pro

I just installed Acrobat 9 Pro on my desktop computer and on my laptop. I was able to download and install the latest updates to the copy on my desktop computer (so that it is now version 9.3.0), using Help>Check for Updates.
When I try the same command on my laptop, I get and error message that states "The update server is not responding, which means it may be offline at the moment, or the Internet or firlewall settings may be incorrect. Please try again later." I tried several times yesterday and today with the same error. The message pops up immediatley; it doesn't even seem to actually try to connect.
I disabled my firewall and antivirus software and still get the same result. I uninstalled then reinstalled Acrobat and still get the same result.
I looked online at Adobe.com to see about downloading and installing the updates manually, but it's difficult for me to tell which updates I need. Some are for other languages and some are for 64-bit but I have Windows 7 32-bit.
A call to tech support was no help. The agent seemed to think because I installed verison 9.0 that I only needed the one English update listed on the download page under 9.0, and not any of the later updates. . . And he said that Adobe recommends manually installing updates from Adobe.com rather than using the Check for Updates command (?!).
Anyway, does anyone know what might be causing this problem with the adobe updater? Maybe I need to reinstall the updater (where do I find it?).
OR
Can someone tell me which of the updates listed on the Acrobat dowload page I should manually install to bring my product up to date?
[Running Windows 7 32-bit on both machines]
Thanks.

Hi,
Which version of Acrobat do you have ?
(Launch Acrobat and Go to Acrobat->About Adobe Acrobat menu item and check the version )
Also, can you ping following urls ?
armmf.adobe.com
armdl.adobe.com
ardownload.adobe.com
Are these urls reachable ?
Also, you can check the contents of host file /etc/defaults/host to see that none of the ips are redirected.
One more thing that you could try:
If you have firewall on, could you please disable the firewall and then try the update. Does it works now ?

Adobe Reader 11 w/Windows 7 not responding

Why does Adobe Reader 11 fail to respond sometimes? Re-installing allows it to function several times then we get a "not responding" message. A plank screen is displayed and the number of pages but NO text! Using repair produces the same results. Upon 1st use of the repaired/reinstalled reader 11 we also get the adobe message "Cannot find or create the font "Times New Roman". Some characters may ot display or print correctly". The text is mostly displayed at this point. The second attempt to display the same PDF or another displays completely w/out any error message at all. At some point during the testing process Adobe Reader 11 stops working! Restarts don't help. Shutdowns don't help. Seems only a re-install or repair allows us to correctly view our PDF document a number of times before we have to repeat the process. Is help available?

Moved the discussion from Adobe Reader Touch for Windows 8 to Adobe Reader.

Digitizer not responding

Similar Messages

Maybe you are looking for