DignosticFile= setting in .ini file not working?

When editing Lookout.ini file in Lookout 6.1 and adding setting as follows:
[COM9]
DiagnosticFile=C:\com9.txt
or
[COM3]
DiagnosticFile=C:\Program Files\National Instruments\Lookout 6.1\com3.txt
No logs are created for the named COM port.
I know I used this feature sucessfully back in Lookout 4.5 and earlier, maybe even in Lookout 5.1.
Please confirm and help!

You can configure this in Lookout. Go to Option->Serial ports, select COM9, check "Enable", input the diagnostic file path, "Accept".
Close Lookout, then open lookout.ini. You will see the following codes.
DiagnosticFileEnable=1
DiagnosticFile=c:\test.txt
DiagnosticAllHex=1
DiagnosticTimeStamp=1
DiagnosticTimeStampDateFormat=73
So, you need to add DiagnosticFileEnable=1 to make it active.
I'm not sure how it worked in Lookout 4.
Ryan Shi
National Instruments

Similar Messages

The RAW setting in Bridge is not working. When I open Bridge I can see only icons, no images. The RA

The RAW setting in Bridge is not working. When I open Bridge I can see only icons, no images. The RAW tool icon is grey, not active. I am going on a trip Tomorrow and I need Bridge to be working. It was working earlier.

I never notied that icon before, and I've been using Bridge for 7 years.
Usually, when you have no image previews for raw files, this means that your Camera Raw plug-in is older than your camera. People always come across this problem when they use a new camera with older software.
To be sure, we need to know which camera you are using, and which version of Camera Raw. To save typing this out for the three-thousandth time, please follow this page which I wrote earlier:
http://yphotography.co.uk/articles/get-adobe-camera-raw-acr-open-photos/
This covers the subject, which is by far the most commonly asked question about opening raw files by a country mile.
If everything checks out fine, let us know. If not, give us more information and we may be able to fix this for you.
PS. Please just open one discussion per problem. There are three threads on this now. It makes it difficult to follow.

INI-File not found

Hi There,
i have a Problem about a cfm-Script that use a ini-File to
connect to my MS-SQL 2000 Server.
We have here a productive System with Windows 2000 CF 4.5.1
SP1 with MS-SQL 2000 (SP4) and IIS 5. We plan to move all Content
to an newer Hardware on Windows 2003 Server.
Once ive installed a Windows 2003 Server with CF MX 7 Trial
and MS SQL 2000 (SP4) an IIS 6.
My Script use an ini File to Connect to my MS-SQL 2000 Server
on the local Machine. When i start the Script there prompt an error
about "e:\inetpub\wwwroot\mysite\upload\upload14964.txt from {ts
'2006-06-28 11:48:00'}
/ INI-File not found!"
In the Script it looks like that:
quote:
<cfx_mysiteImport
IniFile = "e:\inetpub\wwwroot\mysite\renet.ini"
ImportFile = "#physName#"
error = "errimport"
uploadid = "uploadID"
>
Does anyone have an idea to resolve this Problem?
Best regards
Olli
ps.: maybe i can post the complete source ...

lhood7214,
I understand that the Recovery disks came with the notebook, and they are not allowing you to do the recovery. Again I suggest contacting HP support and explaining the issue. They should be able to assist you in obtaining Recovery material that will work.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

I have an ipod touch it is either a second or third edition and i have just had to restore it to factory setting as it was not working and now the wifi on the device is no longer working. Is there anything i can do about this?

i have an ipod touch it is either a second or third edition and i have just had to restore it to factory setting as it was not working and now the wifi on the device is no longer working. Is there anything i can do about this?

Is it this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Otherwise:
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

[svn] 4323: Bug: LCDS-544 - Scenario where two components have seperate channel sets with overlapping channels not working .

Revision: 4323
Author: [email protected]
Date: 2008-12-15 19:23:10 -0800 (Mon, 15 Dec 2008)
Log Message:
Bug: LCDS-544 - Scenario where two components have seperate channel sets with overlapping channels not working.
QA: Yes
Doc: No
Checkintests Pass: Yes
Details:
* Hunting to a new channel within a channelset never triggered a disconnect from the previous channel(s). This isn't a problem in general, but does becomes a problem when an app defines two distinct channelsets containing at least one shared channel at the head of the list. In this case, the first channelset hunts past it and connects on a later channel. But when the second channelset hunts through (triggering a connect fault when it hits that initial shared channel that can't connect), the fault is processed by the first channelset as well (incorrectly).
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-544
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/ChannelSet.as

Running the script by python2 solves it for me:
su - mythtv -c "nice -n 19 python2 /usr/bin/tv_grab_nl_py --output ~/listings.xml"
Best regards,
Cedric

My notification tone when set to 'Silent" is not working even when setup on lolipop

my notification tone when set to 'Silent" is not working even when setup .
My notification tone when set to 'Silent" is not working even when setup . It still keeps ringout . This is highly disappointing

Hello, Yes I have tested this with Android Lollipop and found that when the tone is set to silent within the BBM settings I do not receive any audible notification. Testing summary: Access the More menu - Settings - Tone dropdown and set Tone to BBM
- Send a test message and an audible notification occursAccess the More menu - Settings - Tone dropdown and set Tone to Silent
- Sent a test message and no audible notification occurs To allow us to assist further please follow the steps below to create a support ticket and submit logs. Once submitted someone will contact you to troubleshoot the issue.
1) Browse to www.BBM.com/support/blackberry
2) Locate the Need more help section is the bottom right of the page
3) Select Contact us for additional assistance
4) Complete the web form, provide as much detail as possible such as PINS involved and timestamps
5) Select Submit to create the support ticketOnce the ticket has been submitted you will receive an email with your ticket number. This ticket number can then be used to submit logs. To collect logs use the following KB:
KB35080 - "How to submit logs from BBM for Android, iPhone, and Windows Phone" - www.blackberry.com/btsc/kb35080 Thanks,
Daniel

Calendar Alarm Open FIle not working in Mountain Lion

Recently upgraded my mac mini server to 10.8.2 Mountain Lion. I need it to open a particular Filemaker file every morning, and close the application every night. Used to have a simple alarm in iCal set to do this with Open File and then a very simple Automator script to close the program at a scheduled time, also in iCal. Worked fine. Now, in trying to recreate this, it doesn't work - I make the scripts, and if I set them for a time I can test them (ie. 5 minutes from now), they work as planned, but they will not function on their own at the scheduled time. I thought it might be going to sleep, so I set Energy Saver to Never go to sleep, unchecked "Put hard disks to sleep when possible", and checked "Wake for network access". Still not working. Any thoughts? Any idea how to even troubleshoot this?

I thought I was on to something, but then I re-read your post and saw that you've successfully tested your scripts in Calendar. So, all I've got left to offer is a silly question: has the calendar been set to ignore alerts? I ask because just within the last few days I created an Automator calendar alarm, tested it successfully (in the same fashion as you), and set it off to run on its merrily-scheduled way, only to discover it wasn't firing on its own. Like you, I double-checked my Energy Saver settings and it looked like things should work just fine. What I finally found was that at some point during all my testing and fiddling I'd ticked the "Ignore alerts" box for the calendar, and that's what was keeping my script from firing.

Animated gif files not working in FF5 ok in every other browser

Hi .
I am having problems getting animated gifs to play in firefox 5 i am using a photo gallery script to show these files it works in every other browser i have access to (most of them on Linux and windows Xp and win7 ) if i use FF5 as a file manager and navigate to the files they run but not from a web page this is only with firefox 4 and 5 not got previous to 4 to test .

Right . this looks like it may be a problem with the way FF5 is handling various methods of viewing images i use the following code .
<pre><nowiki><a class="thumbnail" href="#thumb"><img src="photos/IMG_7039 EOS-1D Mark III copy.jpg" width="100px" height="75px" border="0"><span><img src="photos/Animations/IMG_7039 EOS-1D Mark III copy.gif"></span></a></nowiki></pre>
along with css .
<pre><nowiki>(
.gallerycontainer{
position: relative;
/*Add a height attribute and set to largest image's height to prevent overlaying*/
.thumbnail img{
border: 1px solid blue;
margin: 0 5px 5px 0;
.thumbnail:hover{
background-color: transparent;
.thumbnail:hover img{
border: 1px solid blue;
.thumbnail span{ /*CSS for enlarged image*/
position: fixed;
background-color: lightyellow;
padding: 5px;
left: -600px;
border: 1px dashed gray;
visibility: hidden;
color: black;
text-decoration: none;
.thumbnail span img{ /*CSS for enlarged image displays the large image*/
border-width: 4;
padding: 12px;
.thumbnail:hover span{ /*CSS for enlarged image*/
visibility: visible;
top: 0;
left: 230px; /*position where enlarged image should offset horizontally */
z-index: 50;
)</nowiki></pre>
to create the gallery now if i navigate directly to the dir with the gif images in they work ok but if i use the gallery method they fail .
Tried safe mode no addons no change ..

JRE7Update25 Deployment Properties File Not Working And Cant Disable Next Gen Plugin

Good Day
Our organisation needs to deploy JRE7U25 to over 4000 workstations. Our desktops are running the following Windows and IE combinations:
WinXP 32 Bit/IE7
WinXP 32 Bit/IE8
Win7 32 Bit/IE8
Win7 32 Bit/IE9
Win7 64 Bit/IE8
Win7 64 Bit/IE8
We use the 32bit JRE installer across all environments and all IE browsers use 32Bit IE. On all of our environments the Deployment.properties and config files no longer work due to what appears to be a bug in the JRE7U25 installer. Our deployment files are as follows:
Deployment.config
deployment.system.config=C:\WINDOWS\Sun\Java\Deployment\deployment.properties
deployment.system.config.mandatory=true
Deployment.properties
deployment.security.level=MEDIUM
deployment.security.level.locked=
deployment.javaws.autodownload=NEVER
deployment.javaws.autodownload.locked=
deployment.security.mixcode=HIDE_RUN
deployment.security.mixcode.locked=
deployment.console.startup.mode=HIDE
deployment.console.startup.mode.locked=
Both files are being copied to the following location:
C:\Windows\Sun\Java\Deployment
After the installer runs and deployment files are copied to the workstation the deployment.properties and config files look like this:
Deployment.config
deployment.system.config=C:\WINDOWS\Sun\Java\Deployment\deployment.properties
deployment.system.config.mandatory=true
Deployment.properties
#System Deployment Properties
#Mon Jul 01 12:29:20 CAT 2013
deployment.security.level=MEDIUM
I have tried changing the deployment.config file as follows in an attempt to fix this to no avail:
1. deployment.system.config=C:\\WINDOWS\\Sun\\Java\\Deployment\\deployment.properties
    deployment.system.config.mandatory=true
2. deployment.system.config=C:\\WINDOWS\\Sun\\Java\\Deployment\\deployment.properties
    deployment.system.config.mandatory=false
3. deployment.system.config=C:\WINDOWS\Sun\Java\Deployment\deployment.properties
    deployment.system.config.mandatory=true
4. deployment.system.config=C:\WINDOWS\Sun\Java\Deployment\deployment.properties
    deployment.system.config.mandatory=false
5. deployment.system.config=file\:C\:/WINDOWS/Sun/Java/Deployment/deployment.properties
None of the above mentioned works. So all our required settings in the deployment.properties file are being overwritten when opening the Java console? Our other major problem is that Changing the registry key to 0 in order to disable the next generation plugin does not disable the next generation plugin in Jre at the usual location as it worked for us machine wide (across multiple profiles for JRE6U29):
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Plug-in\10.25.2]
"UseNewJavaPlugin"=dword:00000000
^^I have observed on a fresh install of JRE7U25 that the above mentioned registry key no longer exists in this version so a computer wide disablement of this option is no longer possible via the registry.
On our 32Bit and 64bit machines running the 32 bit JRE 7U25 client when we disable the next generation plugin it keeps enabling itself again. Even when we run the javacpl.exe to run as administrator by changing the compatibility settings and disabling the next generation plugin it enables itself again. This is a huge problem for us because our company Oracle web based applications need this plugin to be disabled in order to run the apps properly.
These are major obstacles for our deployment as we desperately require assistance or any advice in addressing these issues as there appear to be numerous bugs with the JRE7U25 release. Thank you in advance.
Update 7 July 2013:
I have observed that if you have the following options in your Deployment.config file it doesn't allow our java webstart apps which use jnlp extensions to run.
1. deployment.system.config=C:\\WINDOWS\\Sun\\Java\\Deployment\\deployment.properties
    deployment.system.config.mandatory=true
2. deployment.system.config=C:\\WINDOWS\\Sun\\Java\\Deployment\\deployment.properties
    deployment.system.config.mandatory=false
3. deployment.system.config=C:\WINDOWS\Sun\Java\Deployment\deployment.properties
    deployment.system.config.mandatory=true
4. deployment.system.config=C:\WINDOWS\Sun\Java\Deployment\deployment.properties
    deployment.system.config.mandatory=false
The jnlp file association is also broken on Windows XP workstations with JRE7U25. We are having to manually associate the .jnlp file extension with javaws.exe on workstation for Web start apps or else users cannot lauch JRE whn clicking on .jnlp links.
The only Deployment.config syntax which allows our Webstart applications to run is as follows:
deployment.system.config=file\:C\:/WINDOWS/Sun/Java/Deployment/deployment.properties
What a mess!

I don't have an answer to the problem, but I am having problems with the system level deployment.properties file and IE9 on Windows 7 32/64bit.
Starting with version 13, the IE plugin seems to igonore the system level deployment.properties file in favor of the user level deployment.properties file. When I open the Java Control Panel, the settings are correct per the system deployment.properties file. Currently to get the Java Plugin to work reliably in IE9 I have to set the following:
_JAVA_OPTIONS = -Djava.net.preferIPv4Stack=true
Disable caching
Set the proxy to Direct Connection.
If I set the _JAVA_OPTIONS as an environment variable and the other two in the system deployment.properties file, Firefox works fine, but IE wont load either of the Java tests. If I removed the system deployment.properties files and configure the user deployment.properties file, both IE and Firefox work fine.
I find it interesting that if I set the configuration through the control panel, then apply the system deployment.propteries file, the user deployment.properties file reverts to defaults when the system file is removed.

WebLogic 9.0 - HTC files not working when specified as a part of cascading

Same problem as described in:
http://support.bea.com/application?namespace=askbea&origin=ask_bea_answer.jsp&event=link.view_answer_page_clfydoc&answerpage=solution&page=wls/S-10511.htm
but resolution does not work for me.
I have created a mimemappings.properties file in BEA directory BEA\user_projects\domains\myDomain\config\mimemappings.properties with following content:
htm=text/html
gif=image/gif
jpg=image/jpeg
htc=text/plain
png=image/png
CSS file:
.calendarClass {behavior:url(calendar.htc)}
Web.xml:
<mime-mapping>
<extension>htc</extension>
<mime-type>text/plain</mime-type>
</mime-mapping>
I also tried htc=text/x-component.
Stop / Start of server, Redeploy of War, this does not work.
Any idea ?

Thanks Ben!
That helped. I also was using that
from the examples, and it did not play well in the HTMLPanel.
I appreciate the quick assistance, as I am pretty new to Spry. I have been creating version 2 of my website code, and one of the conversions has beenfrom JQuery to Spry for almost everything. Spry is a lot easier to conceptualize, except I completely missed the setting you gave me.
One of my problems is lack of knowledge on how to see what is happening, or not ahppening with javascript on a page. I have firebug, and that seems to give me some info. But when I tried to look at stuff with scripts running on the HTMLPanel, I was unable to see anything.
Thanks again,
Jamie

FTP Adapter setting filename at runtime not working

Hi,
I am facing an issue SOA 11.1.1.5 with FTP Adapter setting the filename at runtime. I have a process that reads a file from local server and puts it over to a remote FTP Server.
I want to use the same filename that is picked up locally and placed on the ftp location. Below is the snippet of FTP Invoke and the filename is read from a variable which is set before the invoke
<invoke name="Invoke_PutFile"
inputVariable="Invoke_PutFile_PutFile_InputVariable"
partnerLink="PutFile" portType="ns2:PutFile_ptt"
operation="PutFile" bpelx:invokeAsDetail="no">
<bpelx:inputProperty name="jca.file.TargetFileName" variable="targetFileName"/>
</invoke>
Here is the FTP jca file snippet
<endpoint-interaction portType="PutFile_ptt" operation="PutFile">
<interaction-spec className="oracle.tip.adapter.ftp.outbound.FTPInteractionSpec">
<property name="LogicalDirectory" value="FtpDir"/>
<property name="FileType" value="ascii"/>
<property name="Append" value="false"/>
<property name="TargetFileName" value="setAtRunTime"/>
<property name="NumberMessages" value="1"/>
</interaction-spec>
</endpoint-interaction>
But when I test I am getting an error, it's complaining Cannot set JCA WSDL Property. Error while setting JCA WSDL Property. Property setTargetFileName is not defined for oracle.tip.adapter.ftp.outbound.FTPInteractionSpec Please verify the spelling of the property. ".
Fault Details : com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.oracle.com/bpel/extension}bindingFault} messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage} parts: {{ summary=Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'PutFile' failed due to: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "Could not instantiate InteractionSpec oracle.tip.adapter.ftp.outbound.FTPInteractionSpec due to: Cannot set JCA WSDL Property.
Error while setting JCA WSDL Property. Property setTargetFileName is not defined for oracle.tip.adapter.ftp.outbound.FTPInteractionSpec Please verify the spelling of the property. ".
The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. ".
The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. ,detail=Cannot set JCA WSDL Property.
Error while setting JCA WSDL Property. Property setTargetFileName is not defined for oracle.tip.adapter.ftp.outbound.FTPInteractionSpec Please verify the spelling of the property. ,code=null}
If I use *<property name="FileNamingConvention" value="%yyMMddHHmmssSS%_%SEQ%.txt"/>* inside the jca file it works but I want to use the filename at runtime and be the same name as it's picked up.
Any idea what I am doing wrong.
Thanks

.bpel file
<?xml version = "1.0" encoding = "UTF-8" ?>

<process name="SharedServiceFtpFileMove"
               targetNamespace="http://xmlns.oracle.com/SOALocal/SharedServiceFtpFileMove/SharedServiceFtpFileMove"
               xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
               xmlns:client="http://xmlns.oracle.com/SOALocal/SharedServiceFtpFileMove/SharedServiceFtpFileMove"
               xmlns:ora="http://schemas.oracle.com/xpath/extension"
               xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
         xmlns:ns1="http://xmlns.oracle.com/pcbpel/adapter/file/SOALocal/SharedServiceFtpFileMove/FilePoller"
         xmlns:ns2="http://xmlns.oracle.com/pcbpel/adapter/ftp/SOALocal/SharedServiceFtpFileMove/PutFile"
         xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
         xmlns:xsd="http://www.w3.org/2001/XMLSchema"
         xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
         xmlns:bpel="http://docs.oasis-open.org/wsbpel/2.0/process/executable"
         xmlns:oraext="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
         xmlns:hwf="http://xmlns.oracle.com/bpel/workflow/xpath"
         xmlns:ids="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
         xmlns:bpm="http://xmlns.oracle.com/bpmn20/extensions"
         xmlns:xdk="http://schemas.oracle.com/bpel/extension/xpath/function/xdk"
         xmlns:xref="http://www.oracle.com/XSL/Transform/java/oracle.tip.xref.xpath.XRefXPathFunctions"
         xmlns:ns5="http://xmlns.oracle.com/SharedServiceEmailNotification/xsd/V1"
         xmlns:ns4="http://xmlns.oracle.com/pcbpel/adapter/opaque/"
         xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap">

<partnerLinks>
    <partnerLink name="FilePoller" partnerLinkType="ns1:ReadFile_plt"
                 myRole="ReadFile_role"/>
    <partnerLink name="PutFile" partnerLinkType="ns2:PutFile_plt"
                 partnerRole="PutFile_role"/>
</partnerLinks>
<variables>
    <variable name="Receive_ReadFile_InputVariable"
              messageType="ns1:ReadFile_msg"/>
    <variable name="sourceFileName" type="xsd:string"/>
    <variable name="targetFileName" type="xsd:string"/>
    <variable name="Invoke_PutFile_PutFile_InputVariable"
              messageType="ns2:PutFile_msg"/>
    <variable name="FtpJndi" type="xsd:string"/>
</variables>
<faultHandlers>
    <catchAll>
      <sequence name="Sequence1">
        <terminate/>
      </sequence>
    </catchAll>
</faultHandlers>
<sequence name="main">
    <receive name="Receive" createInstance="yes"
             variable="Receive_ReadFile_InputVariable"
             partnerLink="FilePoller" portType="ns1:ReadFile_ptt"
             operation="ReadFile">
      <bpelx:property name="jca.file.FileName" variable="sourceFileName"/>
    </receive>
    <assign name="Assign_Data">
      <copy>
        <from variable="sourceFileName"/>
        <to variable="targetFileName"/>
      </copy>
      <copy>
        <from expression="'eis/Ftp/FtpAdapter'"/>
        <to variable="FtpJndi"/>
      </copy>
    </assign>
    <assign name="Assign_Invoke">
      <copy>
        <from variable="Receive_ReadFile_InputVariable" part="opaque"/>
        <to variable="Invoke_PutFile_PutFile_InputVariable" part="opaque"/>
      </copy>
    </assign>
    <invoke name="Invoke_PutFile"
            inputVariable="Invoke_PutFile_PutFile_InputVariable"
            partnerLink="PutFile" portType="ns2:PutFile_ptt"
            operation="PutFile" bpelx:invokeAsDetail="no">
      <bpelx:inputProperty name="jca.ftp.TargetFileName" variable="targetFileName"/>
      <bpelx:inputProperty name="jca.jndi" variable="FtpJndi"/>
    </invoke>
</sequence>
</process>File Adapter Poller jca
<adapter-config name="FilePoller" adapter="File Adapter" wsdlLocation="FilePoller.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/FileAdapter" UIincludeWildcard="*-*.txt"/>
<endpoint-activation portType="ReadFile_ptt" operation="ReadFile">
    <activation-spec className="oracle.tip.adapter.file.inbound.FileActivationSpec">
      <property name="DeleteFile" value="true"/>
      <property name="LogicalArchiveDirectory" value="FtpLocalArchive"/>
      <property name="MinimumAge" value="0"/>
      <property name="Recursive" value="true"/>
      <property name="PollingFrequency" value="15"/>
      <property name="LogicalDirectory" value="FtpLocalFiles"/>
      <property name="IncludeFiles" value=".*-.*\.txt"/>
      <property name="UseHeaders" value="false"/>
    </activation-spec>
</endpoint-activation>
</adapter-config>Ftp Adapter put jca
<adapter-config name="PutFile" adapter="FTP Adapter" wsdlLocation="PutFile.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/Ftp/FtpAdapter"/>
<endpoint-interaction portType="PutFile_ptt" operation="PutFile">
    <interaction-spec className="oracle.tip.adapter.ftp.outbound.FTPInteractionSpec">
      <property name="LogicalDirectory" value="FtpDir"/>
      <property name="FileType" value="ascii"/>
      <property name="Append" value="false"/>
      <property name="TargetFileName" value="setAtRunTime"/>
      <property name="NumberMessages" value="1"/>
    </interaction-spec>
</endpoint-interaction>
</adapter-config>Thanks

"open file" Not working with Photoshop CS2

System
MAc Pro Dual Quad 3Ghz, OS X 10.5.2
I have a script that I wrote a while ago to take a series of individual bitmaps and compile them into a strip for access inanothe application. Script used to work well....
I tried to use the script today but ran into a brick wall when trying to open files from within the script.
below is an example of a script that will not work at all,
tell application "Adobe Photoshop CS2"
open file "AV:logo:rot0001.png"
end tell
I normally pass the function a variable for the filenames...but the above script should work fine.. but flatly refuses to !
Below is the Error returned.
Adobe Photoshop CS2 got an error: General Photoshop error occurred.
- The object “current document” is not currently available.
Arghhhh Help !!
Rgds
Chris

Hello
Perhaps your script used to work under pre-OSX10.5 (AppleScript 1.x) but now fails under OSX10.5 (AppleScript 2.x)?
If so, the most likely cause is the drastic change in internal text handling between them. In AS2.x, internal text is Unicode only, which might prevent PSCS2 from resolving 'file path_string' descriptor (when path_string is assumed to be plain 'string', not Unicode text).
Try the following code instead -
tell application "Adobe Photoshop CS2"
open ("AV:logo:rot0001.png" as alias)
end tell
Or -
set a to "AV:logo:rot0001.png" as alias
tell application "Adobe Photoshop CS2"
open a
end tell
Hope this may help,
H

Column concatenations in transformation file not working

I am trying to upload data from flat file. I am trying to concatenate two columns of flat file - YEAR and MONTH in transformation file but for some reason it is not working. I have set it as TIME = YEAR + TIME, for instance I want value 201001 for YEAR 2010 and MONTH 01. But it is quite surprising that of I use simple concatenation excel formula in flat file and store value in new column in flat file (for instance NewTime) and then use this is transformation file as TIME = NewTIME it works file. Since I have many excel sheets, I am just wondering if I can get TIME = YEAR + TIME working.
Any idea mates?

Hi
The concatenation is working fine but let's see what you would like to achieve.
Into transformation file
ColumnD = ColumnS1 + ColumnS2 it will work fine if
ColumnD is a a dimension destination and ColumnS1, S2 are source column.
In your case into source you still have destination fields.
At least this is showing your example.
I hope this it will help you.
Regards
Sorin Radulescu

Hyperlinks to pdf file not working

I hope someone will be able to help me. I have been using PDF
converter online for awhile now and on some of my websites. I know
how to use hyperlinks (I am a webdesiger). All of a sudden, my
hyperlinks are not working on any NEW ones I create. I click on the
link on the website and it comes up with Error 404, Page not found.
I am using regular word documents.
The support team keeps instructing me on how to set up
hyperlinks - I know how to do that.
Is anyone else having this problem?
Thanks!

I am a new user to OnLINE Adobe. My hyperlinks from Word
documents do not transfer to the PDF files. Please help!!!

Captivate 5 files not working in Atlantic link, help please

Version Captivate 5
Published file swf
Atlantic link's Content Point version 1.31
I've previously been using Captivate 4 and publishing swf files to be loaded in to Atlantic Link's Content Point. To get the swf files to work in the past have publish set the publishing preferences to using Action Script 2 (AS2) settings. This is not an option in Captivate 5. When I put the swf files in to Content Point and publish the elearning the swf files will not run correctly, different elements appear all over the screen.
Does anyone know of a way to resolve this problem.
Regards
David

David
Captivate 5 SWF are now AS3 .looks like you have to setup your Content point to AS3 .
Thanks
Suresh

DignosticF​ile= setting in .ini file not working?

Similar Messages

Maybe you are looking for

DignosticFile= setting in .ini file not working?