DIM-00019 Create Service Error

I received following error while installing Oracle 9i ,
DIM-00019 Create Service Error
resultent , not able to create database.
Can anyone help me ,so that i can able to intall oracle properly.
thanks

This may be a day late and a dollar short, but I'm going to post this for the up-and-coming dba's such as myself. This issue looks to be related to a win2k3 Active Directory Domain Controller and a rights issue. But installing the Oracle 9.2.0.7 [or later] patch will solve the problem and let you create the instance. Werked for me. Thanks Everyone!

Similar Messages

  • DIM-00019 Cannot Create service (when running DBCA)

    DIM-00019 Cannot Create service (when running DBCA)
    Hello,
    I was trying to install Oracle9i and configure a DB instance (my first try at 9i, to be sure) and everything went ok until I was creating the DB instance. The dbca asked for all the parameters and when it was actually in the process of copying files/creating services it stops with the error
    DIM-00019 Create Service Error
    Then it tries to continue but another error comes up
    ORA-12560: TNS: Protocol Adapter Error.
    And then it aborts.
    Does anyone know what is going wrong here? I'm trying to install in Windows 2000 Server SP4.
    Thanks in advance for any help,
    --oswaldo santos.

    DIM-00019 Cannot Create service (when running DBCA)
    Hello,
    I was trying to install Oracle9i and configure a DB instance (my first try at 9i, to be sure) and everything went ok until I was creating the DB instance. The dbca asked for all the parameters and when it was actually in the process of copying files/creating services it stops with the error
    DIM-00019 Create Service Error
    Then it tries to continue but another error comes up
    ORA-12560: TNS: Protocol Adapter Error.
    And then it aborts.
    Does anyone know what is going wrong here? I'm trying to install in Windows 2000 Server SP4.
    Thanks in advance for any help,
    --oswaldo santos.

  • DIM-00019 ERROR

    DIM -00019: create service error
    Per the above thread, I have tried to install Oracle 9i (9.2.0.1) on win2k3 with no luck creating the database. When I use the configurator I get the Dim-00019 error. I have tried adding the appropriate accounts to the ora_dba group and to no avail. I get the following error when I try to start the service: Error 1053: Service did not start in a timely fashion. After I press ok on the error, I get another error: ORA-12560. But I have the TNSListener started under services.
    Any suggestions?

    Lou,
    I had the same problem (along with a load of others).
    The Fix I used sucessfully was from another thread from Matthias Breuer
    >>>>>
    I did a successful installation using the following workaround: add the system user to the ora_dba group and start the database creation assistant. When you get the dim-0019 error open the services window, get the newly created Oracle Instance Service, set the start type to automatic and start the service. Then continue the database installation.
    good luck Matthias Breuer, iCD GmbH
    >>>>>>>>>>>>
    The Oracle Instance Service he mentions is the new Service relating directly to the Database name that you are in the process of creating.
    ??? Why Oracle is unable to create but unable to start the database service makes me wonder if this software should be at release stage ???
    Hope this helps and thanks Matthias
    Gerry Copland

  • Error while creating service entry sheet

    Hi Experts,
    I am trying to create service entry sheets using bapi 'BAPI_ENTRYSHEET_CREATE'  for a purchase order with multiple line items. The bapi creates SES for the first line item but gives error 'User xxxxxx already processing purchase order nnnnnnnnnn' for the rest of all. Tried using 'COMMIT AND WAIT' after bapi call but it's not working.
    Kindly help me out with the solution.
    Regards,
    B.Siddhesh

    Hi Siddhesh,
    Please use below code before calling the 'BAPI_ENTRYSHEET_CREATE' to unlock the PO.
    Hope this is helpful.
    **Delete the Lock objects EKKO Header PO.
         CALL FUNCTION 'ENQUEUE_READ'
           EXPORTING
             GNAME  = 'EKKO'
             GARG   = ''
             GUNAME = SY-UNAME
           TABLES
             ENQ    = ENQ
           EXCEPTIONS
             OTHERS = 0.
         IF NOT ENQ IS INITIAL.
           DESCRIBE TABLE ENQ LINES SY-TFILL.
           CHECK SY-TFILL > 0.
           CALL FUNCTION 'ENQUE_DELETE'
             EXPORTING
               SUPPRESS_SYSLOG_ENTRY = 'X'
             IMPORTING
               SUBRC                 = RC
             TABLES
               ENQ                   = ENQ.
         ENDIF.
    **Delete the Lock objects EKPO Header PO.
         CALL FUNCTION 'ENQUEUE_READ'
           EXPORTING
             GNAME  = 'EKPO'
             GARG   = ''
             GUNAME = SY-UNAME
           TABLES
             ENQ    = ENQ
           EXCEPTIONS
             OTHERS = 0.
         IF NOT ENQ IS INITIAL.
           DESCRIBE TABLE ENQ LINES SY-TFILL.
           CHECK SY-TFILL > 0.
           CALL FUNCTION 'ENQUE_DELETE'
             EXPORTING
               SUPPRESS_SYSLOG_ENTRY = 'X'
             IMPORTING
               SUBRC                 = RC
             TABLES
               ENQ                   = ENQ.
         ENDIF.
    Reward if helpful.
    Regards,
    Shakeel Ahmed

  • Error while creating service for BW query

    Hi All,
              I am creating service in gateway system by using BW query.
              I had created service using Entity Type -> Redefine -> BW query Service
              It is generated successfully but when i am running through Gateway Client, It is throwing error, given below
              " The argument '67.504.82831' cannot be interpreted as a number."
              All properties are string but still it is giving error in number.
              I am using Netwiever Gateway 7.3.
             Kindly advise, what could be issue and , how we can analyse.
    Thanks in Advance.
    Regards
    Vivek

    Thanks for the reply.
    We are aware that system will not allow to create Service entry sheet for held po. But it is allowed me to create on a particular date. Another day i tried to create/delete a SES for the same PO or new PO(held status)  system is not allowing me to delete/create SES.
    Please help me what might be the reason which allowed me on a particulare date.
    Thanks in Advance,
    Vinod....

  • Error: while creating Service Entry Sheet - for HELD PO

    Hi experts,
    While PO XXXXXXXXXX is in the status of Hold. System allowed me to create & delete a service entry sheet(SES) on particular date.
    Another day i tried to create SES for the same PO. System is not allowing me to create SES and it gives me error as  'Purchase order XXXXXXXXXX incomplete (parked)'.
    While debugging I found that ekko-memory field set to 'X'. At this point I am getting error.
    My question is why the system is allowed me to create SES for a PO which is in HELD status?.
    Please help me.
    Thanks In advance,
    Vinod

    Thanks for the reply.
    We are aware that system will not allow to create Service entry sheet for held po. But it is allowed me to create on a particular date. Another day i tried to create/delete a SES for the same PO or new PO(held status)  system is not allowing me to delete/create SES.
    Please help me what might be the reason which allowed me on a particulare date.
    Thanks in Advance,
    Vinod....

  • Error creating service call from wizard

    Hello,
    I am trying to import a static method on a ABAP class using the create service call wizard. It fails in program SAPLWDY_WB_MODEL_WIZARD with an out of bounds error :
    In the running program "SAPLWDY_WB_MODEL_WIZARD", part of a string was about to be accessed with an explicitly specified length.
    However, this length (2) exceeded the current length of the string (1).
    This kind of access is illegal.
    Termination occurred in the ABAP program "SAPLWDY_WB_MODEL_WIZARD" - in "GET_EXTENDED_RELATIVE_NAME".
    The main program was "SAPMSEU0 ".
    >>>>>
    split l_absolute_name at 'TYPE=' into str1 str2.
       if str2(2) = '%_'.           
    <<<<<
    The error occurs when the type is I, and so the string containing the type length is 1.
    I have not had this problem before even though I have imported methods containing the same type in parameters. I understand that nothing has changed on our system.
    Kind regards
    Steve

    hi
    go to service call wizard. Select the radio button "use existent controller. iN the controller field, select componentcontroller
    In the next step select function module>give the bapi name>Now you have table containing node type, name and object type. Under object type column, make all of them of type C ( context node/attribute ) and complete the wizard.
    In your component controller, you will find the nodes as per importing/exporting parameters of BAPi
    Regards
    Vishal Kapoor

  • No Functional Area Found Error while creating service data in me22n

    Hello,
    While creating service data for a purchase order in ME22n I am getting error like " No functional area found"  .
    Please tell me how to maintain the Functional area for a particular GL account
    In the help i can found that we can find the functional area "The functional area can be determined either using the cost element, the account assignment object (such as the cost center or order)"
    How we can determine this please through some light on this statement.
    Thanks
    Pradeep
    Moderator message: not directly related to ABAP development, please post again in the appropriate functional forum.
    locked by: Thomas Zloch on Oct 15, 2010 9:55 AM

    Hello Madhav,
    You have to maintain your 'business transaction profile' (SPRO->CRM->IC Web->Business Transaction->Define bus. trans. prof.) in the customizing and assign that profile to your IC WebClient profile (the one you assigned in the org. model)
    In the business transaction profile you must make sure that at least one transaction type (e.g. ZSRV) is assigned as 'Dependent business transaction' and that entry is flagged as 'Service'.
    Also make sure that that transaction type (ZSRV) has leading business transaction category 'Service process' (BUS2000116).
    This should solve your problem!
    Kind regards,
    Joost

  • ABAP dump Error while creating service order in PCUI.

    Hi Experts,
                     We are getting following ABAP dump error while creating service order in PCUI which is working fine in GUI.
    Runtime Errors         RAISE_EXCEPTION
    Date and Time          02.01.2008 14:55:38
    Short text
    Exception condition "TYPE_NOT_FOUND" raised.
    What happened?
    The current ABAP/4 program encountered an unexpected
    situation.
    What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
    Error analysis
    A RAISE statement in the program "CL_CRM_ELEMDESCR==============CP" raised the
    exception
    condition "TYPE_NOT_FOUND".
    Since the exception was not intercepted by a superior
    program, processing was terminated.
    Short description of exception condition:
    For detailed documentation of the exception condition, use
    Transaction SE37 (Function Library). You can take the called
    |    function module from the display of active calls.     
    We have added custom fields in the service application. these custom fields with Z-structure & data elements  are included in BSP structure CRMT_BSP_SRV_OIC_SRCHRES in development system.But the same Z structure & custom fields are exist in the production system but not included in BSP Structue CRMT_BSP_SRV_OIC_SRCHRES.
    This may be the reason resulting this ABAP dump error in PCUI while creating Service order.
    How these Z structures can be included in the BSP Structure CRMT_BSP_SRV_OIC_SRCHRES in production system?
    Helpful answers would be rewrded max points as it is high priority issue.
    Regards,
    Basavaraj Patil

    Hi Thirumala,
    Thnaks for the reply.
                I have enhanced service application using transaction EEWB to add new custom fields. these fields are there in Z structure created by the system in production system. All the transports are moved to target system. Problem is that Z structure( contains custom fields)  created while doing  EEWB is not included in BSP structure.
    I f transports are missed to move to target system, Is there any other alternative to solve this problem?
    Regards,
    Basavaraj Patil

  • Error whil creating Service Line item in ME51N using BAPI_PR_CREATE

    Hi Experts,
                Am able to create PR number using BAPI_PR_CREATE, but when am trying to create Service line item am getting acc assignment error please check my code and solve my issue. ..its very adj  please help me .
    DATA : t_bapimereqitemimp TYPE TABLE OF bapimereqitemimp ,
          t_bapimereqaccount TYPE TABLE OF bapimereqaccount,
          t_bapimereqaccountx TYPE TABLE OF bapimereqaccountx,
          t_pritemx    TYPE TABLE OF bapimereqitemx,
          wa_bapimereqitemimp        TYPE bapimereqitemimp,
          pr_number  TYPE bapimereqheader-preq_no,
          wa_prheader  TYPE   bapimereqheader,
          wa_prheaderx TYPE  bapimereqheaderx,
          wa_pritemx   TYPE  bapimereqitemx,
          wa_bapimereqaccountx TYPE bapimereqaccountx,
          wa_bapimereqaccount TYPE bapimereqaccount,
          t_return     TYPE TABLE OF bapiret2,
          wa_return    TYPE bapiret2.
    DATA : t_bapi_srv_limit_data TYPE TABLE OF bapi_srv_limit_data,
            wa_bapi_srv_limit_data TYPE bapi_srv_limit_data.
    DATA servicelimitx  TYPE TABLE OF bapi_srv_limit_datax.
    DATA w_servicelimitx  TYPE bapi_srv_limit_datax.
    DATA : t_servicelines TYPE TABLE OF bapi_srv_service_line,
            w_servicelines TYPE bapi_srv_service_line,
            t_servicelinesx TYPE TABLE OF bapi_srv_service_linex,
            w_servicelinesx TYPE bapi_srv_service_linex,
            t_bapi_srv_acc_data TYPE TABLE OF bapi_srv_acc_data,
            w_bapi_srv_acc_data TYPE bapi_srv_acc_data,
            t_bapi_srv_acc_datax TYPE TABLE OF bapi_srv_acc_datax,
            w_bapi_srv_acc_datax TYPE bapi_srv_acc_datax.
    DATA : t_bapimereqitem TYPE TABLE OF bapimereqitem,
            w_bapimereqitem TYPE bapimereqitem.
    DATA :  t_bapimereqitemx TYPE TABLE OF bapimereqitemx,
            w_bapimereqitemx TYPE bapimereqitemx.
    wa_prheader-pr_type  = 'RV'."lv_doc_type.
    wa_prheaderx-pr_type = 'X'.
    wa_bapimereqitemimp-preq_item  = '1'."wa_eban-item.
    wa_bapimereqitemimp-pur_group  = '100'."wa_eban-ekgrp.
    wa_bapimereqitemimp-preq_name  = 'E.R. TITTO'."wa_eban-afnam.
    wa_bapimereqitemimp-short_text = 'AC Fitting'."wa_eban-txz01.
    wa_bapimereqitemimp-material   = ' '."wa_eban-matnr.
    wa_bapimereqitemimp-plant      = '1000'."wa_eban-werks.
    wa_bapimereqitemimp-store_loc  = 'ST00'."wa_eban-lgort.
    wa_bapimereqitemimp-matl_group = 'Z13'."wa_eban-matkl.
    wa_bapimereqitemimp-quantity   = '1'."wa_eban-menge.
    wa_bapimereqitemimp-unit       = 'AU'."wa_eban-meins.
    wa_bapimereqitemimp-deliv_date =  '20140604'."wa_eban-lfdat.
    wa_bapimereqitemimp-preq_price = '100'."wa_eban-preis.
    wa_bapimereqitemimp-item_cat   = 'D'."wa_eban-pstyp.
    wa_bapimereqitemimp-acctasscat =  'K'."wa_eban-knttp.
    wa_bapimereqitemimp-fixed_vend = ' '."wa_eban-flief.
    wa_bapimereqitemimp-purch_org  = '1000'."wa_eban-ekorg.
    wa_bapimereqitemimp-currency   = 'INR'."wa_eban-waers.
    wa_bapimereqitemimp-pckg_no = '00000001'.
    wa_bapimereqaccount-preq_item  = '1'."wa_eban-item.
    *wa_bapimereqaccount-serial_no  = '01'.
    wa_bapimereqaccount-gl_account = '0000002244'."wa_eban-sakto.
    wa_bapimereqaccount-costcenter = 'OPSD'."wa_eban-kostl.
    APPEND wa_bapimereqitemimp TO t_bapimereqitemimp.
    APPEND wa_bapimereqaccount TO t_bapimereqaccount.
    wa_pritemx-preq_item  = '1'."wa_eban-item.
    wa_pritemx-pur_group  = 'X'.
    wa_pritemx-preq_name  = 'X'.
    wa_pritemx-short_text = 'X'.
    wa_pritemx-material   = 'X'.
    wa_pritemx-plant      = 'X'.
    wa_pritemx-store_loc  = 'X'.
    wa_pritemx-matl_group = 'X'.
    wa_pritemx-quantity   = 'X'.
    wa_pritemx-unit       = 'X'.
    wa_pritemx-deliv_date = 'X'.
    wa_pritemx-preq_price = 'X'.
    wa_pritemx-item_cat   = 'X'.
    wa_pritemx-acctasscat = 'X'.
    wa_pritemx-fixed_vend = 'X'.
    wa_pritemx-purch_org  = 'X'.
    wa_pritemx-currency   = 'X'.
    wa_pritemx-pckg_no   = 'X'.
    wa_bapimereqaccountx-preq_item  = '1'."wa_eban-item.
    *wa_bapimereqaccountx-serial_no  = '01'.
    wa_bapimereqaccountx-preq_itemx = 'X'.
    wa_bapimereqaccountx-serial_nox = 'X'.
    wa_bapimereqaccountx-gl_account = 'X'.
    wa_bapimereqaccountx-costcenter = 'X'.
    APPEND wa_pritemx TO t_pritemx.
    APPEND wa_bapimereqaccountx TO t_bapimereqaccountx.
    **Service item limit
    *wa_bapi_srv_limit_data-doc_item = '10'.
    wa_bapi_srv_limit_data-overall_limit = '1000'.
    wa_bapi_srv_limit_data-exp_value = '800'.
    APPEND wa_bapi_srv_limit_data TO  t_bapi_srv_limit_data.
    *w_servicelimitx-doc_item = '10'.
    w_servicelimitx-overall_limit = 'X'.
    w_servicelimitx-exp_value = 'X'.
    APPEND w_servicelimitx TO servicelimitx.
    w_bapimereqitem-preq_item = '10'.
    ***w_bapimereqitem-preq_name = 'E.R. TITTO'.
    ***w_bapimereqitem-plant = '1000'.
    ***w_bapimereqitem-store_loc = 'ST00'.
    ***w_bapimereqitem-matl_group = 'Z03'.
    ***w_bapimereqitem-quantity = '1'.
    ***w_bapimereqitem-unit = 'AU'.
    w_bapimereqitem-item_cat = 'D'.
    w_bapimereqitem-deliv_time = '20140604'.
    w_bapimereqitem-acctasscat = 'K'.
    **w_bapimereqitem-consumpt = 'U'.
    APPEND w_bapimereqitem TO t_bapimereqitem.
    **w_bapi_srv_acc_data-doc_item = '1'.
    **w_bapi_srv_acc_data-outline = '0000000001'.
    *w_bapi_srv_acc_data-srv_line = '20'.
    w_bapi_srv_acc_data-serial_no = '10'.
    w_bapi_srv_acc_data-serial_no_item = 'D'.
    *w_bapi_srv_acc_data-quantity = '1'.
    *APPEND w_bapi_srv_acc_data TO t_bapi_srv_acc_data.
    **w_bapi_srv_acc_datax-doc_item = '1'.
    **w_bapi_srv_acc_datax-outline = '0000000001'.
    *w_bapi_srv_acc_datax-srv_line = '20'.
    **w_bapi_srv_acc_datax-serial_no = '01'.
    **w_bapi_srv_acc_datax-serial_no_item = '01'.
    *w_bapi_srv_acc_datax-quantity = '1'.
    *APPEND w_bapi_srv_acc_datax TO t_bapi_srv_acc_datax.
    w_servicelines-service = '00000001'.
    APPEND w_servicelines TO t_servicelines.
    w_servicelinesx-service = 'X'.
    APPEND w_servicelinesx TO t_servicelinesx.
    CALL FUNCTION 'BAPI_PR_CREATE'
       EXPORTING
         prheader        = wa_prheader
         prheaderx       = wa_prheaderx
       IMPORTING
         number          = pr_number
       TABLES
         return          = t_return
         pritem          = t_bapimereqitemimp
         pritemx         = t_pritemx
         pritemexp       = t_bapimereqitem
         praccount       = t_bapimereqaccount
         praccountx      = t_bapimereqaccountx
         servicelimit    = t_bapi_srv_limit_data
         servicelimitx   = servicelimitx
         servicelines    = t_servicelines
         servicelinesx   = t_servicelinesx
         serviceaccount  = t_bapi_srv_acc_data
         serviceaccountx = t_bapi_srv_acc_datax.

    Hi,
    Check this Thread , Thread1 . It might help you to resolve the issue.
    Thanks
    KH

  • SRT Framework exception: ICF: Error when creating service node. [rc:wrong_icf_name] No special characters allowed in name

    Hi,
    I have created a web service in SAP ECC from a RFC.
    While configuring the web service in SOA management to publish it, getting error SRT Framework exception: ICF: Error when creating service node. [rc:wrong_icf_name] No special characters allowed in name
    How to resolve the same.
    Thanks
    Tanmay

    Hello Tanmay,
    Are you including quotes (') in the name, I assume not?
    Regards,
    Siddhesh

  • Service Category Error in Create Service Master Record - AC03

    Hi,
    I'm trying to create a new service master record. When I select  service category "SERV service : purchasing" from the list I get the error "Missing Authorization : Create Service SERV"
    Please help.
    Regards,
    Sriram

    Please use transaction code SU53 to know the object name which is missing in to your profile.
    Once u will get the access of this Object, u will be able to post the SES.
    Please take help from BASIS team.
    Edited by: Manish Kumar Agarwal on Jul 3, 2009 1:38 PM

  • Error on creating Services in Hyperion planning configuration

    Hello Sir,
    Here I started Hyperion installation on Multiple Systems
    1. fndserver I installed essbase, planning components, and I configured only foundation here, and eas installed and its working
    Web logic is application server 7001 port
    2. essserver here essbase server is configured and it is working fine.
    3. planserver here I installed only planning components and in foundation I selected OHS also and I start configuration while deploying application server details I gave fndserver, port number 7001 , same user name and password while configuration deploying application server error like
    HyS9Planning: Couldn't create service
    fndserver: windows 2008 server r2 in vmware1
    essserver: windows 2008 server r2 in vmware2
    planserver: windows 2008 server r2 in vmware3
    here fnd, ess server host is windows 7 and planserver is Ubuntu host, but 3 systems is pinging and 0% lost.
    please give me the solution.
    Thanks in advance
    Ravi

    Hi,
    When you configure Planning on Ubuntu, you have to disable the option "*Create Windows Services for configured components*".
    Regards,
    David Mendele
    BI / EPM Project manager at Business & Decision
    Lima, Perú

  • Error on creating Services in Distributed Environment

    Hello Sir,
    Here I started Hyperion installation on Multiple Systems
    1. fndserver I installed essbase, planning components, and I configured only foundation here, and eas installed and its working
    Web logic is application server 7001 port
    2. essserver here essbase server is configured and it is working fine.
    3. planserver here I installed only planning components and in foundation I selected OHS also and I start configuration while deploying application server details I gave fndserver, port number 7001 , same user name and password while configuration deploying application server error like
    HyS9Planning: Couldn't create service
    fndserver: windows 2008 server r2 in vmware1
    essserver: windows 2008 server r2 in vmware2
    planserver: windows 2008 server r2 in vmware3
    here fnd, ess server host is windows 7 and planserver is Ubuntu host, but 3 systems is pinging and 0% lost.
    please give solution.
    Thanks in advance
    Ravi

    Post your questions on: Planning and Budgeting

  • Creating Protection Group Fails with Error:360 The operation failed due to a virtual disk service error

    Hello
    I'm setting up a DPM server (2012 R2) at a remote site; everything goes well with no issues until a protection group is created, at which point I get the following error;
    Create protection group: Protection Group 1 failed:
    Error 360: The operation failed due to a virtual disk service error
    Error details: The system cannot find the file specified
    Recommended action: Retry the operation.
    The environment is as follows;
    - Virtual Machine Running Server 2008 R2 Fully updated
    - Storage Pool is an iSCSI connection Thick Provisioned 1TB GPT and shows in Disk Management with no issues.
    - Have connected to Session 0 (console) 
    - Error log shows The provider did not receive a Plug and Play service notification for the volume. volume=10  for the VDS Dynamic Provider
    Can Anyone Help?
    Thanks
    .Adam Langdon

    Hi,
    Disk defrag is initiated when a volume shrink is attempted. See if there is any problem defragging a volume and correct any problems doing that.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
    This posting is provided "AS IS" with no warranties, and confers no rights.

Maybe you are looking for