Dim display apert from when using FW target disck mode

This is strange.
iBook g4 1.2 Ghz. On startup the screen is completly dark. You can just about see that it is displaying something but no real image. So far so failed backlight but...
If I start the machine up in target disk mode, I get an image. Not quite as bright as normal but around 50% of normal brightness. As the machine starts the screen flicks onto full brightness for a second before reverting to 50%.
I've just finished putting a new 160GB drive in the machine and it's doing this after a clean install of Leopard onto the new drive.
As said I'd normally guess a failed back light but for the fact that I can get an image using FW TD and it can't be software since it's a brand new drive and OS.
Works fine when connected to an external monitor too.
Any ideas?

Hey Andrew,
Try resetting PMU first, it's responsible for the backlight:
http://support.apple.com/kb/HT1431
Theoretically you could have a GPU problem if that doesn't work.
Richard

Similar Messages

  • Display reports from BW using WAD on blackberry

    Hi All,
    I have to display reports from BW using WAD on blackberry
    can any one please guide me how to do it?
    awaiting Reply
    Thanks & Regards
    Prasad

    you have to integrate SAP Mobile infrastrcture with BW system to achive this.

  • Putting iMac display to sleep, when using TV as a screen.

    I have just connected my iMac to my 42" Panasonic 1080p TV, the connection was easy and is working fine. My questions relates to putting the iMac display to sleep when using the TV as a monitor, if I am watching You Tube, Sky Player or a DVD, I intend to use my TV as the monitor. Is it possible for the iMac to puts its display to sleep, whilst leaving the TV on. I played around with this today, however was unable to manage this.
    Regards Craig

    Hi Craig
    There is no way to independently sleep either the iMac's Display or an attached Display/TV. However if in the Display Arrangement Preferences you set the attached Display or TV to be the Main Display and turn Mirroring Off, then FrontRow and the Full Screen Mode app's like, DVD player, QuickTimePlayer, etc. will black out the unused iMac display.
    Dennis

  • How to display items from database using catagorylookupdroplet

    Hi everyone,
    i want to know how to display items from database using catagorylookup droplet. if anybody have any code snippet please share it.
    Thanks in advance,

    <dsp:droplet name=".................../CategoryLookup">
         <dsp:param name="id" param="itemId"/>
         <dsp:oparam name="output">
              <dsp:valueof param="element.displayName"/>
                   <%-- This is show the Child Category --%>
                   <dsp:droplet name="......................./ForEach">
                   <dsp:param name="array" param="element.childCategories"/>
                   <dsp:oparam name="outputStart">Child Categories</dsp:oparam>
                   <dsp:oparam name="output">
                        <dsp:a href="">//bydefault it will take its own file's name
                             <dsp:param name="itemId" param="element.repositoryId"/>                                                                                          <dsp:valueof param="element.displayName"/>
                        </dsp:a>
                   </dsp:oparam>                                             
                   </dsp:droplet>
                   <%-- This is show the Child Product --%>          
                   <dsp:droplet name=".............../ForEach">
                        <dsp:param name="array" param="element.childProducts"/>
                        <dsp:oparam name="outputStart">Child Products</dsp:oparam>
                                  <dsp:oparam name="output">
                                       <dsp:droplet name="................/ProductLookup">
                                            <dsp:param name="id" param="itemId"/>
                                            <dsp:param name="elementName" value="Prod"/>
                                            <dsp:oparam name="output">
                                                 <dsp:getvalueof id="img102" param="Prod.smallImage.url" idtype="java.lang.String">
                                                      <dsp:img height="250" width="250" src="<%=img102%>"/>
                                                 </dsp:getvalueof>
                                            </dsp:oparam>
                                       </dsp:droplet>
                                       <dsp:a href="productView.jsp">
                                            <dsp:param name="itemId" param="element.repositoryId"/>
                                            <dsp:valueof param="element.displayName"/>
                                       </dsp:a>
    Hope this helps.
    -RMishra

  • IPhone4S display unknown symbol when use USSD

    please when i used iPhone4S display unknown symbol when use USSD ???
    NOT : i dont know why cose as same time i have iphone 4 and used same carrier but  its WORK FINE AND show ussd

    iPhones no officially support USSD but I can sure it is support USSD because my friend's iPhone is work with USSD.
    I and my friend using same carrier same iPhone4S same codes,no JB but my friend's iPhone is work with USSD,only my iPhone cannot work with USSD.
    Thank for all answer,no need answer for me already because I just now send to apple store,they check is phone problem,so now claim warranty,need to wait 2 week to get back new iPhone =.="

  • Where does the date come from when using Tip type = dateFormat

    Hi,
    Can anyone tell me when using personilizations where the date that is shown comes from when using tip type = dateFormat? Today it shows (example: 24-Sep-2012) but yesterday it was the 23rd so seems to increment by one day. Is there a way to change the date shown here, to sysdate for example?
    Thanks

    Hi,
    You can check Inline Messaging, Tips, Hints and Bubble Text section in OA Framework Developer Guide
    Thanks,
    Jit

  • Unable to open https sites. can open when using firefox in safe mode.

    Mozilla Firefox has been an exceptional browser, however in the last update I have experienced problems when trying to open https sites. They will not open and then time out. I do not have this problem when using Internet explorer. I have contacted customer service at the problem sites, and they have said other customers have also experienced this problem. I have gone into options and have changed various settings to see if this would solve the problem. It didn't, your response would be appreciated.. Please note if I use firefox in safe mode I can access these sites? My E-mail as follows: [email protected]

    Did you perhaps install an extension to open sites with https
    # Type '''about:config''' into the location bar and press "Enter"
    # Use Find ("Ctrl+F") to look for '''https'''
    One such extension is "HTTPS-Everywhere"
    As you probably know Firefox Safe Mode disables extensions and some preferences.
    http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Extension_issues
    You posted a question here: you should check for all of your answers at...
    :Unable to open https sites. can open when using firefox in safe mode. | Firefox Support Forum | Firefox Help
    :https://support.mozilla.com/en-US/questions/872957
    You are expected to pick up your answers where you post them, in the upper right corner is a "get email updates" that you can click on. For more information, see my avatar icon to the left of my reply where you posted.

  • How to remove time machine backup from a mackbook pro used in target disk mode

    Many months ago I (as my backup drive failed) I used my macbook pro in target disk mode to store the time machine backup of my iMac.  How do I delete the backup on the macbook pro?  I am running mountain lion on both machines.  When I boot the macbook pro in target mode, it's not showing up in the finder on my mac.

    When I boot the macbook pro in target mode, it's not showing up in the finder on my mac.
    From the Finder menu bar, select
    Finder > Preferences > General
    and check the box marked Hard disks.

  • Display "blank-out" when using Maya with a GF 7800?

    I have a problem where my LCD display occasionally blinks off for about 5-10 seconds when using Maya with a scene displaying about 100,000 polys. Has anyone else encountered this? This only seems to happen when I am quickly rotating the camera in a grey shaded perspective panel?
    My LCD is a Dell 20" LCD (set at 1600x1200) connected to a Geforce 7800 in a Quad G5 with 4.5GB of ram.
    I have never seen this issue before in Maya (I have been using Maya for years, on other machines), so I suspect it is hardware or driver related?

    OK, have completed several tests. I definately seems that the my Geforce 7800 has problems when running some applications. I wonder if anyone else has encountered this problem?
    The easiest way to cause the display to momentarily shut off is to use Maya in the full screen perspective camera window in shaded mode. Proceed to rapidly move a 20,000 poly model (or greater) both zooming and rotating (the polys need to fill the entire screen and shake the mouse).My display (Dell 20" 2001fp) will blink-off for a few seconds. Of course, this in not "normal" work flow, but I have this issue happening when working normally, it can sometimes take time to occur.
    I have tried the Geforce 6600 (256mb ver) and this does not occur with that video card. I have tried several mice both wired and wireless, plus changed the Energy Saver options for Processor performance (from comments I read on Macintouch.com). The problem is consistent to my Geforce 7800. This problem will also occur in Photoshop CS, by moving images and resizing, but I found it much harder to induce.

  • Display Login failure when using External Custom Login Form

    I am new to OAM area and really apreciate if some one can guide me in the right direction. I have configured External Custom Login Form (thanks to fusionsecurity blog) with Oracle Access Manager 11g + webgate 10g. If I enter correct user id and password in the below form, then all is good and able to access the protected resoruce.
    If I enter incorrect values for loginname/password fields, then the from simply refreshes itself and does not give me any error message. How can display error message when a user enters in correct values for those fields?
    <form action="http://hostname:7777/oam/server/auth_cred_submit" method="post">
    <fieldset>
    <legend>Login Screen</legend>
    <label for="username" accesskey="u">User Name:</label>
    <input type="text" id="username" name="username" size="15" tabindex="1">
    <label for="password" accesskey="p">Password:</label>
    <input type="password" id="password" name="password" size="15" tabindex="2">
    <input type="hidden" name="login-form-type" value="pwd">
    <input class="submit" type="submit" value="Login" tabindex="3">
    </fieldset>
    </form>
    Thanks

    Hi!
    I have installed Oracle Access Manager 11g + Webgate 11g and not 10g, but I think
    it has to work beause login is being processed by OAM (/oam/server/auth_cred_submit);
    and it if does not work, it may give you a clue on how to do it.
    Having stated that fact, it is very simple to do it: whenever I try to access a protected
    resource and I am not authenticated I am redirected to my login page and some
    special parameters are passed to it such as: request_id, OAM_REQ, authn_try_count and
    some others.
    authn_try_count is the magic one as it show the number of login tries, so here is
    a code snippet of my login page which uses JSTL for conditional processing.
    <form...>
    <c:if test="*${param['authn_try_count'] > 0}*">
    &lt;span class="error-msg"&gt;
    <fmt:message key="login.val.wrong.login"/>
    &lt;/span&gt;
    </c:if>
    </form>
    Best regards,
    Jesús García from
    Mexico city

  • XML not displaying in Safari when using a XSL.

    Hi, has anyone encountered this issue where Safari, and all Mac browsers for that matter, don't display XML when using an XSL? When I use a XML file with an XSL stylesheet I get a "Document is Empty" error. It displays correctly when a CSS is used and also works just fine on a PC.

    My goof.  In the Safari preferences area I turned on Developer mode out of curiosity and then by accident turned off pictures.  All is well now.

  • How to keep display as Show when using Hide Show region with pagination?

    We are trying to use a 'Hide Show' region with pagination. The problem is that if you 'Show' (ie expand) the region and then hit the link for the next page, the next page displays Hidden (ie collapsed). We want to keep the page display as 'show' when you move to the next set of records.
    There is a fix in this forum for this issue in version 2.2 (Application Express) but we are on 2.0.0.00.49 (HTML DB). Does anyone know of a similar fix for HTML DB 2?
    Ver 2.2 fix is at:
    http://www.oracle.com/technology/products/database/application_express/packaged_apps/packaged_apps.html#STICKY
    Thanks.
    David.

    Thanks for your reply.
    Running the application install script via SQL Plus using FLOWS_020000 produces result:
    NOT COMPATIBLE (Your export may contain calls not supported by your HTMLDB version.)
    The wwv_flow_api package routines that are not available in our version appear to be:
    create_or_remove_file
    create_install
    create_install_script
    Is there any way to handle these calls in other ways?
    Thanks
    David.

  • Display Item cleared when using 'Enter-Query'

    Hi all,
    i am going to develop a multilanguage application with very
    special heading texts using display items for these headings.
    BUT- if I press EnterQuery, they are cleared also.
    How can I restrict cleanup of these display items used as
    headings ?
    I was looking in the properties, but no idea.
    Thanks for help,
    udo

    I'm showing how to do it when switching modes. I'm
    not suggesting this is the best way to do a query.We need to look at this in the context of the original probelm in the thread linked to above. For most cases the when-timer-expired etc is just a huge detour around using the pre-query trigger but it's an interesting approach to the specific problem in the earlier thread. The OP there wanted to be able to type '>5000' into a number field in a non-database block, which we can do in a database block in enter-query mode, and use it as a query parameter in the database block. Perhaps if we enter this into a character field in the non-database block and populate the numeric field in the database block whilst in enter-query mode then we can do searches on ranges of data? Unfortunately it doesn't work - you get an ora-06502 error just like you do when using the pre-query trigger. For the situation in the original thread you would have to use a 'default where'.

  • MBP with retina display always crash when using Final cut pro x and iMovie. Plz l need help

    HI, My MBP with retina display always crash when l am using Final cut pro x and iMovie and come up with gray screen. Plz l need help

    Take it back and get a refund. What are you waiting for, your new Mac does not work correctly.

  • The page at docviewer at my company's website displays this error when using FireFox but not hwne using I.E. "ERROR: JAS MiscUtils AX Control not installed!"

    When using Fire Fox to view documents at my company's website, the following message occurs:
    "ERROR: JAS MiscUtils AX Control not installed!"
    This error does not occur when I use I.E.

    That error message probably refers to a missing ActiveX control, which is why it doesn't work in Firefox but does in Internet Explorer.
    https://support.mozilla.com/en-US/kb/ActiveX

Maybe you are looking for

  • Returning newly created IDs from View with Instead Of

    Hi All, I have the following table: CREATE TABLE TBLSIM_SUPPLIER_H     "SS_ID" NUMBER(10,0) NOT NULL ENABLE,     "SS_GUID" NVARCHAR2(36) NOT NULL ENABLE,     "SS_NAME" NVARCHAR2(50) NOT NULL ENABLE,     "SS_H_IS_ACTIVE" NUMBER(1,0) DEFAULT 1 NOT NULL

  • Exporting video shot in cine 24

    I have shot some footage in cine 24 to export to idvd. Is there something that should be done differently for cine 24? It seems that some of it has come out shaky, particularly in faster action in the shoot. I shoot in DV (not HD) 16:9, edit in FCE 3

  • 10gR3 Custom IBR process

    I have a process for our 751 env that makes some changes to a document prior to it going through IBR. This has been working well for quite a while, but now we are moving over to 10gR3 and I am looking into getting it working in the new env. While IBR

  • Disappearing "My ipod" icon after autoupdate !!!!!!!!!!!!!!

    I just updated itunes to the current 7.0.1.8 version. Unlike the previoius version, after auto-updating when I dock my ipod, the "My ipod" disappears. The challenge this creates is I now have now way of right clicking on the icon to safely remove it

  • Considering Bootcamp, terrified

    Hi! Just for spec, I'm on a Pro 15", version 10.6.8, running in I believe Snow Leopard. Anyways, I'm considering bootcamping my laptop to be able to play games (Skryim, Mass Effect) and perhaps get paint tool Sai, but have an irrational fear of the p