DIM IDu0092s are polluted only when we load the Master data and SIDu0092s

DIM ID’s are polluted only when we load the Master data and SID’s are polluted only when load the retraction data. System automatically performs the reconciliation of DIM and SID’s  when we delete the transaction and master data.
a.     True
b.     False

Hi,
You can use the mapping section of the transformation file for this purpose. It should be something like:
*COL(5) + *Str(_) + *COL(1)
I am considering that the 5th column of your file is the property. The 1st column is the ID.
Please take a look at the below link for more information:
http://help.sap.com/saphelp_bpc75_nw/helpdata/en/5d/9a3fba600e4de29e2d165644d67bd1/content.htm
Hope this helps.

Similar Messages

  • SID is not generated when i load the master data

    hi
    We got the error "No Sid found "000631330" of characteristic 0COSTELMNT when transaction data is loaded.
    We have loaded the value "000631330" for characteristic 0COSTELMNT  and reloaded from the PSA . still we r getting the error  No Sid found "000631330" of characteristic 0COSTELMNT
    Thanks much in advance
    Raj

    Hi.....
    First check whether that value exist in the Master data table.........to do this Go to RSA1 >> search the infoobject >> Go to the Master data / text tab..............here check the P table...........to check it double click on the table..........there check if that value exist...........and also check the version..........whether it is in M version or A version..............If it is in M version.............then activate the Master data..........because SID gets generated during the activation of the Master data..................
    To activate the Master data.................use the program : RSDDS_AGGREGATES_MAINTAIN...........
    Then repeat the load.........
    If the value does'nt exist in the table...............then first check the IP.............if the setting is only PSA..........then first update the request in the target...........if the setting is OK..............
    Then go to the source system...............check in RSA3...........give the datasource here.........and check whether the value exist in the source system or not.................if not then check the R/3 tables.......that whether the value exist in the table or not..............if the value exist in the table............then check how data is getting populated in the Extract structure..........
    Hope this helps.........
    Regards,
    Debjani.......

  • Error when loading the master data

    Hi all,
    Can anybody help me out. I am loading the master data from DB Connect source. When i am trying to load it it is giving the runtime error PERFORM_CONFLICT_TAB_TYPE. Can anybody tell me what could be the problem & necessery steps to take.
    Thanks in advance.
    Regards,
    Shaik.

    Hi,
    Please go through the following threads:
    PERFORM_CONFLICT_TAB_TYPE  shortdump during data loading into ODS
    Perform_conflict_tab_type error
    PERFORM_CONFLICT_TAB_TYPE error-Urgent!!
    Next time you might want to just search the forum first... lots of surprises!
    Hope this helps,
    Cheers,
    Gimmo

  • 'Overlapping Time Intervals' error while loading the Master Data

    Guys,
              Need you help with this. I am trying to load the Master Data (attribute) for InfoObject 0FMD_FRSITM using DTP from DataSource 0FMD_FRSITM_ATTR and am getting an error 'Overlapping Time Intervals'.
    This is happening due to overlapping Valid From/Valid To date's for the same Financial Statement Item (0FMD_FRSITM) with different Editions.
    If I select the option 'Ignore Duplicate Records' while loading the data, it is successful. But not all the records are loads and Editions are missing.
    Below is an example of how the data looks like.
    FRSITM         Valid To                  Valid From                 Edition
    1001             12/31/9999             04/01/2010                2010.1.1
    1001             01/31/2010             03/01/2010                2010.1.2
    1001             12/31/9999             02/01/2010                2010.1.3
    In the above scenario, the Valid To Data for record 1 and record 3 is the same (12/31/9999) and the record 3 is being ignore when I select the option 'Ignore Duplicate Records'.
    And also I see that the Edition is not the Key Field.
    Any suggestions or ideas? Appreciate your help.
    Thanks.

    FRSITM Valid To Valid From Edition
    1001 12/31/9999 04/01/2010 2010.1.1
    1001 01/31/2010 03/01/2010 2010.1.2
    1001 12/31/9999 02/01/2010 2010.1.3
    1. While selecting ignore duplicate, make sure to-date is not part of symantic key.
    2. if system comes across two same records it picks up the latest one.
    3. It shall merge the timelines is overlap is found.
    4. I hope Edition is time dependent attribute
    I believe infoobjet key is FRSITM Valid To.
    In your case because first record has more period and may be the latets record system ignore the earlier one with the same time interval.
    have a look at Q table and you shall be able to figure out for your self.
    Hope it helps
    Vikash

  • Error while loading the master data into hierarchy

    Hi,
    When i am trying to load the master data into a hierarchy, it is showing me the following error.
    "Invalid Entry, hierarchy xxxxxx does not exist".
    Can you please tell me what might be the possible cause for this error.
    Thanks,
    Prateek

    Hello
    Have you created a hierarchy, I mean go to Transfer structure->Hierarchy structure 
    ->create hierarchy, put a check of whether it is sorted or time dependent etc. after that while loading data through infopackage just check that you have selected an appropriate hierarchy name in hierarchy selection tab.
    Hope it will help!!
    Regards,
    Sandeep

  • Error while loading  the master data

    Hi Masters,
              When I tried to load the master data, data was not loaded. Monitor tells, in YELLOW color (0 records from 0). Status telling following things
    Diagnosis
    No errors could be found. The current process has probably not finished yet.
    System response
    The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
    and/or
    the maximum wait time for this request has not yet run out
    and/or
    the batch job in the source system has not yet ended.
    Current status
    No Idocs arrived from the source system.
    Could you please help me...
    Thanks & Regards
    Raja.S

    Hi,
    Check the TRFC log.
    You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
    Removing errors:
    If the TRFC is incorrect, check whether the source system is completely connected to the SAP BW. Check especially the authorizations of the background user in the source system.
    Resolutions:
    Reload the Master Data manually again from Info-package at RSA1.

  • Hello! I want to set up an appointement with Genius Bar but when i choose the available date and try to confirm there is this message appears : We're sorry. There was an error processing your request. Click OK to try again. HELP ME PLEASE

    Hello! I want to set up an appointement with Genius Bar but when i choose the available date and try to confirm there is this message appears : We're sorry. There was an error processing your request. Click OK to try again. HELP ME PLEASE

    I have called the store with the same problem but the answer is this must be done on line. I was told to use a different browser but it has made no difference - I am still having the same problem

  • Error While Loading the Master Data from R3

    Hi Gurus,
    I am loading the masterdata from R3.I have enhanced the Datasource .In that datasource there is a field DATUB ( Valid To Date).For this field I have wriiten the User Exit at the R3 side.Now I am loading the data in BW.But I am not getting the values for DATUB field in the BW, though they are there at the R3 side.
    I have done following to analyse the issue.
    1.Have checked the datasource at the R3 from RSA3.Its populating the field DATUB correctly.
    2.Have deleted the whole masterdata and tried to load again.But no success.
    3.Have tried to load the data for the perticular Bill of Material(BOM).Then it get loaded correctly along with the value of DATUB.But when i tried loading the entire data i am not getting the field DATUB populated.
    Please help me out.Its urgent.
    Thanks.
    Shalaka

    Hello,
    I finally got the solution to my problem.
    If you append a field to generic datsource then you should check the tick in datasource for "field only". Or else you would not get the values handed over to BW.
    Please check following link for more details about this "field only" setting for Generic datasources.
    http://help.sap.com/saphelp_tm70/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/content.htm
    Regards,
    Anuj

  • Getting the error while loading the master data

    Hi
    i have tried to delete the master data using right click and delete master data, but still there are data.
    Now i am trying to load this master data again then i am getting the message "0 from 50033 records"
    and data load got failed with error message "master data/text of 0vendor already deleted "
    and due  to this i could not able to load my other infoprovider (which have 0 vendor).
    can any body help me, it very urgent...
    thanks and regards
    Anupam

    Hi Raju,
            I assume there are no routines written in the update rules and also you ae directly loading the data from R/3 ( not from any ODS). If that is the case then it could be that, the data maintained in R/3 has overlapping time intervals (since  time dependency of attributes is involved). Check your PSA if the same profit center has time intervals which over lap. In that case, you need to get this fixed in R/3. If there are no overlapping time intervals, you can simply increase the error tolerance limit in your info-package and repeat the load.
    Hope this helps you.
    Thanks & Regards,
    Nithin Reddy.

  • Do I need to refresh Info Providers when I chg the Mast Data attri to Nav

    Hai Gurus,
       Can any tell me, When I change an attribute of master data, material to a navigation. Do I need to refresh data to info provider, cube?. If this cube is part of the multi provider. In What sequence I need to make the changes?. I assume.
    1. change to the master data.
    2. then assign the dimention to it at the multiprovider level.
    3. then Identity in the multiprovider.
    4. available in the query
    It is okay? Please confirm.
    Thanks, Vijay.

    Is not necesary to refresh infoprovider.
    1.- Change attribute in master data from only attribute to navigational.
    2.- Set navigational attribute as navigational in all infoproviders in the multiprovider.
    3.- Set navigational attribute as navigational in multiproviders

  • How to Load the Master Data for custom defined Z infoobjects?

    Hi Gurus,
    This is the requirement.
    Some screen enhancements has to be made by adding  new Custom fields( like two text boxes,eg Name and city ) in such a way if we enter data into that text box,that data value for both of the Enhancements has to be stored in some table.If this data is a master data,then how would I pull this master data into BW.
    Please someone throw some light on this problem.
    Lets say a Screen is enhanced with NAME and CITY with text text boxes.Let the user enters the value for NAME and CITY.Let them be stored under two different tables ZTAB1 and ZTAB2.How would I load this master data into custom Defined  Z infoobjects ZNAME AND ZCITY in BW.
    Please help me out.
    Thanks is Advance,
    Regards

    you can by creating generic datasources on thoase tables with Full load or delta.
    if the number entries is less.. you can try full load...
    if it is more... along with required fields...put date also as one fields. which needs to get date of execution of program or date of uploading to Tables. this will be useful build Delta Mechanism.
    all the best.
    Nagesh Ganisetti.

  • Getting Duplicate data Records error while loading the Master data.

    Hi All,
    We are getting Duplicate data Records error while loading the Profit centre Master data. Master data contains time dependent attributes.
    the load is direct update. So i made it red and tried to reloaded from PSA even though it is throwing same error.
    I checked in PSA. Showing red which records have same Profit centre.
    Could any one give us any suggestions to resolve the issues please.
    Thanks & Regards,
    Raju

    Hi Raju,
            I assume there are no routines written in the update rules and also you ae directly loading the data from R/3 ( not from any ODS). If that is the case then it could be that, the data maintained in R/3 has overlapping time intervals (since  time dependency of attributes is involved). Check your PSA if the same profit center has time intervals which over lap. In that case, you need to get this fixed in R/3. If there are no overlapping time intervals, you can simply increase the error tolerance limit in your info-package and repeat the load.
    Hope this helps you.
    Thanks & Regards,
    Nithin Reddy.

  • Impact on transactional Loads if Master data is not loaded

    Scenario for your reference:
    The loads to ZPO_LINE from PC3 was failing for past 20 days from The fix was applied on April 21. 
    I need help to decide the effects of not loading ZPO_LINE for past 20 days. And create a detailed plan for data loads required.
    If the master data is not loaded for 20 days will it affect the transaction loads happened during those days?
    And how can i find out the impact and correct the transaction data if it does?
    Can any 1 help me with this?

    Hi,
    If i understand your scenario, you have a scenario where the Master data load has not been updated for the last 20days but, the transaction data was loaded without any interruption.
    In such a scenario, the Transactional loads will only be affected if there is some field which undergoes transformation after looking up on the master data.
    So, first load the master data and run the attrib change run process.
    After this, if the transaction data is in full update mode, then you dont need to do anything as data will be refreshed with correct values in the next load.
    If delta loads are there, you might need to performa  full repair.
    Regards,
    Rahul

  • SAP BPC 7.5: Master Data and Hierachiy Load from InfoObject

    Hallo Forum Participants,
    I am going to load Master Data from a "Clarity" Reporting Tool in BW to SAP BPC 7.5 via Process Chains (/CPMB/IMPORT_IOBJ_MASTER, /CPMB/IMPORT_IOBJ_HIER) delivered from SAP.
    These Process Chains load the Master Data and Hierarchies from an InfoObject. To find out more about Ticking of BPC I have performed a following test. So, on BPC Admin Interface I have duplicated the Dimension u201CAu201D and called it as Dimension u201CBu201D (in BW site InfoObject u201CAu201D and u201CBu201D). In the Member Sheet of Dimension u201CBu201D I have implemented the several changes und tried to load Master Data from BW namely from infoObject u201CBu201D into BPC Dimension u201CAu201D. Therefor I created a transformation file and mapped one for one IDu2019s. The data Manager started these chains, but resulted nothing (Status: red X).
    What are the features of BPC InfoObjects in Comparision with regular InfoObject?
    How can I load Hierarchies into InfoObject?
    What else I must take into account?
    Why does not work this simple test?
    Regards.
    Alisher
    Edited by: Alisher Babaev on Jan 6, 2012 1:59 PM

    Hallo pkrishna,
    so it is successed with master data load, but without hierachiies.
    My Master Data Properties on Dimension Sheet are:
    -ID
    -EVDESCRIPTION
    -PARENTH1
    -CURRENCY
    I have mapped as below:
    ID=ID
    CURRENCY=/CPMB/CURR
    /CPMB/CURR- my technical id in BW.
    In the Note you advised transformation file has been mapped like below:
    -NODENAME=NODENAME
    -HIER_NAME=HIER_NAME
    -PARENT=PARENT
    -ORDER=ORDER
    After executing of package i get whether rejected list or log file. No data can be retirieved from InfoObject.
    Have you any Idea?
    regards

  • Transction data loading with master data as key?

    Expert's,
    I am trying to load the transction data with master data as a key.ZEMPID is my masterdata which having attributes ZEMPNAM and ZEMPDES .My transction data contains ZEMPID.ZEMPSAL and ZEMPAGE.I could create the master data and also load it successfully.But when I tried to create the infosource for trasctional data I should get all the attributes whatever I have given it for the ZEMPID.This I am not getting.Also While creating the cube if I select the infosource then in chraracterstic tab I am not getting my characterstics(master data+attribute).Please any one help me.

    Hello Vasu
    You are talkin abt transactional data and saying that not created cube/Ods ..
    Let me put the things again
    1. When you load master data you create infosource ( direct or indirect), All the attribute will be automatically comes in the infosource...when you define application component in master data tab in infoobject maintenance it is ready for data to be loaded. Search for application component in infosource..u will get the flow
    2. When you load data in infocube only transactional data goes in it.....master data presents in master data tables...In infosource you define what are the field which need to be present in cube.......so you will be able to include only these objects which are present in cube dimensions + attribute which are defined navigational in the cube....
    Master data attribute will never be pushed automatically....only componding object are pushed automatically.....
    If you want to load attribute of ZEMPID then make them navigational in cube or add them in one of cubes dimension...
    Hope i could make myself clear
    Thanks
    Tripple k

Maybe you are looking for

  • Move plotting to inside a while-loop

    Hi I have a plot that occurs outside a whileloop, and another that is constructed inside the whileloop. How do I get the plots to run synchronously in the same waveform chart? I've tried looptunnels, I've tried shiftregisters but neither solves it. B

  • Screensaver source: Picture loading issue!

    After upgrading my MacMini to Yosemite I started having this issue. The Screensaver source is loading for a while and then shows an error message on the screen telling that was not able to connect to the NAS (network drive).  so no pictures are loade

  • Printed page smaller than page settings

    Hi. Not sure if anyone's got experience with this, but for some reason in Office 2008, Word seems to have reduced the size of the page layout settings by about 30%. In other words, with page layout set to A4 sized paper, the print preview and actual

  • Help with deleting an element

    I'm a new user to Edge, but I have searched all the layers in my document and can't find the text box that's in question. I need to delete it, but I can't locate it. Anyone have this issue or any suggestions to find it? Thanks in advance for your hel

  • IDVD 4.0.1 quits burning during stage 4,  after many hours

    Here's the problem: I make a movie in iMovie and go to burn it in iDVD. Then, in stage 4, the burn process freezes and then quits. The total process takes about 7-10 hours. My home movie running time is only 1 hour and 18 minutes. Any known compatibi