Dimension members were not deleted after refresh in Planning desktop

Hi
A Planning application's outline was restored from backup.
It contains some dimension members which were deleted from Planning Web some weeks before and there were made many Planning refreshes after. Full database refresh had been made in Planning desktop and these members were not removed. As refreshing is a procedure to keep metadata in correspondence such result isn't expected in my opinion.
Is it normal behavior ?

Hi
i had a similar problem before. here is what i did
add the member again.
refresh
delete the member
refresh again.
this solves the relational repositories sync issue.
hope this helps.
Dornakal.
www.dornakal.blogspot.com

Similar Messages

Just days ago, I downloaded and created folders for two batches of photos and now they are missing. They were not deleted by anyone, and even if they were, they were not found in my trash can. What happened? They were erased from my camera, so I am upset.

Just days ago, I downloaded and created folders for 2 batches of photos I downloaded from my camera to iphotos but now both are missing. They were not deleted and even if they were, were not found in my trashcan. I have looked through every folder and they are not there. Is there a bug that can get into iPhoto to do this? Is there a program Apple offers to retrieve lost photos? Thank you.

debbie5891 wrote: ... They were not deleted and even if they were, were not found in my trashcan...
How do you know they were not deleted? Is it possible that they were moved to the trash and the trash has been emptied, if not by you, perhaps by someone else?
In the best case, you mean they were not deleted from your camera. If so, it will be simple to merely download again from your camera after you have corrected any problem with your Mac or workflow.
If you have a way to be certain that your two folders were not deleted from your Mac, follow the directions provided by your Mac's Disk Utility to repair your Disk (not Disk Permissions.) On more than one occasion, disk repair has restored the visibility of missing folders I knew I had not deleted. If you have trouble with the process, post back which specific Mac OS version ( > About This Mac) you are using so we can offer specific help.
It is also possible that the missing folders might be saved somewhere you do not expect them to be.
It is also possible that they may merely be invisible and, thus, not showing in your Finder windows even after performing a Disk Repair.
Here are some more ideas you can consider:
Restart Mac and then look where you expect the folders to be. They may be visible there now.
If not, try a Spotlight search for the folder name(s) you used. Spotlight may give you a list of places to look. If you don't remember the folder name(s), try a search for the file type your camera uses for saved images. My cameras save "jpg" files, but yours may save other image file types.
You can also open a finder window and use the window's search oval to search. The method allows you to use the search "+" button to add invisible items via the "File Visibility" choice.
debbie5891 wrote:... I have looked through every folder and they are not there....
If you are using any version of Mac OS X, I doubt this statement can be true.
If you select your disk volume name (not the Media item) in the sidebar of your Mac's Disk Utility, you will see that the number of Folders and files on your disk is very large. For example,I keep my startup disk small and write most of my files to other disks. Even so, my startup disk contains more than 195,000 folders.
If you mean you used some software to search each folder, please post back the name of the app you are using.
debbie5891 wrote: ... Is there a bug that can get into iPhoto to do this? ...
I have not had the problem you describe, nor have I heard of such an iPhoto Bug.
I have used every version of iPhoto I have seen including the current new version: iPhoto '11 version 9.5 (902.7). You can find the version you are using by executing the iPhoto > About iPhoto menu command and post it back here.
debbie5891 wrote:... Is there a program Apple offers to retrieve lost photos? ...
I am not aware of any Apple apps that work specifically on photo files. If you know the pathname to the lost files, and if you are comfortable with Unix commands, you might be able to use your Mac's Terminal utility to retrieve at least some of your images. However, it will be MUCH simpler to merely download another copy from your camera.
You can search the Mac App Store for "unerase" to find several apps that can unerase files, including deleted photo files, in certain circumstances even after the trash has been emptied. To determine whether one or more of them may meet your needs, see their product info and reviews for specifics about each one.
debbie5891 wrote:...Thank you.
You're most welcome.
If you need to post back for more information, please provide specifics on your Mac OS, iPhoto version, which of the suggestions offered here you have tried, and any details not already provided about the problem status.
Message was edited by: EZ Jim
Mac OSX 10.9

"CJS-30199 The CTC classes were not found after waiting for 900 seconds."

Here's the snippet of the sapinst_dev.log
I am trying to install Central Instance on a RedHat Enterprise 4 server (32bit). But stuck at
this stage.
TRACE      [iaxxejsexp.cpp:188]
           EJS_Installer::writeTraceToLogBook()
2007-05-10 20:19:48.093 FSPath(/usr/sap/LN1/DVEBMGS02/j2ee/cluster/server0/apps/sap.com/tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/com/sap/ctc/util/ConfigMainExt.class).isExisting() done: false
TRACE      [iaxxejsexp.cpp:188]
           EJS_Installer::writeTraceToLogBook()
2007-05-10 20:19:48.093 NWJavaInstance._waitForFile() - elapsed time = 910 timeout = 900
TRACE      [iaxxejsexp.cpp:188]
           EJS_Installer::writeTraceToLogBook()
NWException thrown: nw.usageTypes.ctcSyncWaitTimeout:
The CTC classes were not found after waiting for 900 seconds.
ERROR      2007-05-10 20:19:48
           CJSlibModule::writeError_impl()
CJS-30199 The CTC classes were not found after waiting for 900 seconds.
TRACE      [iaxxejsbas.hpp:460]
           EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR      2007-05-10 20:19:48 [iaxxgenimp.cpp:736]
           showDialog()
FCO-00011 The step configCAF with step key |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|15|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_CAF|ind|ind|ind|ind|1|0|configCAF was executed with status ERROR .
Your help is much appreciated.
Thanks and Regards,
Satish/

Hello Satish
Please do following checklist:
1. Check that the J2EE engine is up and running (e.g. log in with Admin)
2. Check that the following application is running:
     Visual Admin => Cluster => Server => Services => Deploy
     Select "Application" and look for "sap.com/tclmctcutilbasic_ear
3. Try to continue installation
It could be helpful to apply the patch for CTC as per note # 938261
before restarting.
and also try to add more memory allocation.
If issue persists,
- I'd like to know which installation DVD/CD number being using ?
- The contents of the LABEL.ASC file.
- The installation guide reference and title used for this install ?
- SAPINST version ?
- Oracle version/patch level ?
- Operating system version/patch level ?
See also:
Note # 851251 - SAP NetWeaver 2004s Installation on UNIX
Thanks
Kenny

TPS file is not deleted after FrameMaker creates PDFs via Acrobat 8

Using FrameMaker 7.2 build 158, and Adobe Acrobat 8, when creating PDF files, the temporary PostScript file (*.tps), which is created before the final PDF, is not deleted after the creation of the PDF is complete.
This is a big deal for us because we are using a tool which hooks into the PDF-creation of FrameMaker/Distiller, and is reliant on this TPS file being deleted.
Is this a known bug? Does Adobe know about this? Do any other users have workarounds for this?

Thomas,
FWIW, speaking from experience with the Save As route, I've seen
random "phunnies" in the final PDFs (such as the missing fonts
issues), a bigger .tps file than the .ps file generated from directly
printing to file, slower throughput in both the intermediate
postscript file creation and actual distilling (probably tied in to
the larger .tps file) and other differences from what the joboptions
should have been.
There should not have been any differences in the file sizes being
created if the same printer instance/configuration was actually being
used. I also see this on some automated runs with Miramo. It's not
consistent either - sometimes it works fine and then the next run, the
process is considerably slower and there are dropouts in the PDFs.
So far, manually printing to a ps file and distilling always seems to
work without any issues.
Your mileage may vary.
Arnis

Safari on my iPad. I have an original iPad and since updating to the latest iOS safari forces me to restart the iPad about two to three times a day. Three problems: 1. It just blacks out. 2. The reading list does not delete after the story is read. 3. Ema

Since updating to latest iOS safari fails several times a day.
1. Just quits.
2. The items on the reading list will not delete after visited.
3. The screens goes grey when I go to email a reference.
Is the a solution other the restarting the iPad or is this something apple ought to fix?

See if the following help.
Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data (and Clear History)
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

RFCs not working after Refresh, is this SecureStore issue?

In our landscape we do frequent system refreshes (DB copy). we use to take out RFC table export and then import them back after refresh. every thing was fine till we upgraded to Netweaver 6.0. Now after refresh most of rfc donesn't work (one which have user ID/ Password in them).
Here is my findings till now:
When we goto SM59 and RFC maintenance screen it give below message:
bold "User Password invalid for identifier /RFC/CCMS (see Long text)"
============================
This is what long message is"
Message no. SR128
Diagnosis
Changes to the global key or system data have invalidated the passwords in secure storage.
Procedure
Enter the user password again.
Procedure for System Administration
You can find detailed error messages for the specified ID in transaction SECSTORE.
======================================
In secstore transaction I found this message for entry:
"System-dependent data for entry /RFC/CCMS changed: TRS / WTH"
Long text for this is:
System-dependent data for entry /RFC/CCMS changed: TRS / WTH
Message no. SECSTORE031
Diagnosis
When accessing the secure storage, the system detected that system-dependent data (installation number or system ID) had been changed.
Entry data: TRS
Current system data: WTH
If you receive this message during a migration process, the "Current system data" field contains the old specified system data instead of the current system data.
The content of both fields can also be empty, if the system cannot determine the data in the current context.
System Response
It is no longer possible to access entries that were created with the previous data.
Procedure
Contact your system administrator.
Procedure for System Administration
For more information, see SAP Note 816861.
========================================================
When I check the note it talk about the system copy and migration key, release key. I don't think this is valid in our case.
Now I tried to find out the tables where secstore stores its data:
RSECACHK    Table for Controlling ABAP Programs
RSECACTB     Table for ABAP Access Authorization for Secure Memory
RSECTAB       Secure Memory: Memory for Encrypted Data
At present we backup following tables:
rfcattrib
rfcdes
rfcdoc
rfcsysacl
Please advise if anybody faces the same issue? does anybody have any solution any notes?
Edited by: Madhusudan Bansal on Oct 22, 2008 9:46 AM
Edited by: Juan Reyes on Oct 22, 2008 1:24 PM

I checked all the notes and tables. every thing is correct.
What I think wrong is when we do refresh at that time. SS (secure store) tables from source system come here! we just export and import RFCs but not SS.
All I wanted to know is If we export and import SS tables will this resolve our issue?
can you tell me have you ever did refresh for netweaver? did you face this issue?
appreciate your help

Partitions not deleted after data compression

Hi,
I ran compress job to compress data in a cube, but the job were cancelled because of short dump. I checked the job log, the compression were finished, but the partitions deletion were not finished successfully. So after compression, there are still large partitions for the cube. Could anyone help me with this issue? Thank you very much.
Regards,
Fuyang

The Terminal.app command diskutil will do that. Launch it and type
man diskutil, hit the return key, and read all about it.

Application not working after refreshing a page with F5

Hi,
Developed an application with jazn-data for security reason. In my application, i've taskflow with page fragments. In this fragment, i;ve LOv field with client listener to popup LOV using 'F8' key. After refreshing this page using 'F5' key or browser's refresh button, my application gets hanged. Even sign out button also not accessible. In browser's console i got "LaunchPopupUsingF8 is not defined" error. LaunchPopupUsingF8 is my javascript function for LOV popup.
Kindly guide me whats wrong in this...
Edited by: Usha on Sep 26, 2011 5:10 AM

Hi,
I would use JavaScript to disable the F5 button as it leaves the application in an undefined state after refreshing the content from the browser cache
see page 36 onwards (search for F5) for an idea
in http://www.oracle.com/technetwork/developer-tools/jdev/1-2011-javascript-302460.pdf
Frank

Indent changing is possible but changes are not reflecting after refresh

Hello all,
I am facing one issue with alignment in the BEX. i need to changed the the result rows. initally the indent is 2 , am changing it to 1 and saving as existing report. after refreshing the workbook. the changes are not reflecting. can anybody provide me some inputs on these. any help is appreciated.

Hi Priya,
You need to Implement the following SNOTE's for these changes.
Union Budget 2015: As per Finance Bill 2015, the Government has implemented amendments to existing sections and introduced new sections in the Income Tax Act. Changes have been made in the following topics:
Tax Surcharge Rate
Increase in Conveyance Allowance
Section 80
Sukanya Samriddhi Scheme: The Government has launched this new deposit scheme for the minor girl child. This is a savings scheme that can be opened by the natural (biological) or legal guardian of a girl child aged below 10 years. Related Notes:
2139208 - Union Budget Changes – 2015
2138605 - Sec80C: Sukanya Samriddhi Scheme
Upcoming Developments:
PF Admin Charges Revision
Professional Tax for Mizoram & Nagaland states
Average Rate of Tax
Regards,
Venkat Polisetty

Production Order reservation(ETO) not deleting after PGI (VL01N)

Hi All,
Greetings!!!
A query, regarding ETO (Project system)
ETO scenario, For production, reservation will be create through WBS element. After production , If I do delivery and PGI, production order reservation is not deleting.
Same material If I do delivery(LP) through CNS0, then order reservation is going to delete after PGI. But Sales order price is not copying to Billing If I follow this process.
Is there any copy controls to flow the sales price to billing when delivery happens through CNS0. If not
Which requirement class and movement type I need to determine in Sales order.
Please do needful.
Very High,
Thanks,
Prasad.

This is standard SAP
SAP process is to deliver project stock using project delivery , where in PGI happens against the reservation created & deletes RESERVATION.
wherein if you do PGI for order ( sale order or prod order ) , it happens against project stock ( spe stk Q - 281 movement ) i.e., against WBS element
I faced the same for sale order delivery of project stock .
we are selecting FINAL Issue indicator through user exit which triggers when PGI is clicked
This will delete RESERVATION from stock overview
hope this helps ...Let me know if you found any alternative

Reg Order reservation not deleting after PGI (VL01N)

Hi All,
ETO scenario, For production, reservation will be create through WBS element. After production , If I do delivery and PGI, production order reservation is not deleting.
Same material If I do delivery(LP) through CNS0, then order reservation is going to delete after PGI. But Sales order price is not copying to Billing If I follow this process.
Is there any copy controls to flow the sales price to billing when delivery happens through CNS0. If not
Which requirement class and movement type I need to determine in Sales order.
With regards,
Prasad.
Edited by: SDGURU on Feb 9, 2011 10:50 AM
Edited by: SDGURU on Feb 9, 2011 10:51 AM
Edited by: SDGURU on Feb 9, 2011 11:14 AM

Hi All,
Please do need full.
Regards,
Prasad.

Retired applications are not deleted after 60 days

We have several applications that are retired, all deployments are removed. According to SCCM documentation retired applications should get deleted after 60 days automaticly. It has been about 1 year since that the application is retired, but it does not
get deleted.
Any idea's?
Steven Mudde

Application is retired, deployments removed, no references. Manual deletion of the applications is not the problem, this works as it should.
However SCCM documentation says "If an application that has no deployments is retired, it will be deleted from the Configuration Manager console after 60 days."
http://technet.microsoft.com/en-us/library/gg682031.aspx
This does not work
Steven Mudde

PIR not deleted after MD74/75 and 76 execution

Hi
After the execution of PIR deletion transaction in the sequence MD74 ,MD75 and MD76, we still find some PIR present in the system.
Please suggest if this can be deleted or do we have some condition which prevents the deletion of the PIR
Thanks

Hello
Please read carefully the following note, which describes the PIR reorganization in detail and, under which circumstances the PIRs are deleted:
135807 Reorganization of planned independent requirements
The following information is provided about transaction MD74, and may be helpful to you:
MD74 (RM60RR20): Adjusting Requirements:This transaction consists of
    two parts:
    a) Adjustment (reduction) of all planned independent requirements
       scheduled quantities to the amount of (customer) requirements
       assigned.If no requirements are assigned, the planned quantities
       are set to zero.
    b) For all inactive requirements (these have no requirements
       assigned), the schedule line records are deleted from table PBED
       if the 'Delete inactive requirements' flag is set on the
       selection screen.
BR
Caetano

Future price not deleted after cost run

Hi all,
If a material master has the future price maintained on the Accounting 1 view, then it is picked up in the next cost estimate that is created.
Costing strategy is Future price, Price from PIR, Standard cost.
However, I have been told that once the Cost estimate has been created, the future price is deleted from the material master. In this way the cost accountant can delay the release of a new standard price to avoid large re-valuations.
The future price is not being deleted following our cost run, can anyone advise on this?
Thanks
Phil.

Future prices will not delete when a cost estimate is released. If the Future Price is ACTIVATED (no cost estimate involved) then the Future price field will clear because it is "rolled forward" in the same manner that a Marked cost estimate is rolled forward to the Released Cost Estimate, leaving the field Future Planned Price on Costing 2 blank.
Be very careful with CKME - it will activate future prices and release future planned cost estimates, but it does not stop and show you what is about to be activated or released and the financial impact. We wrote a custom transaction that had CKME report what it is going to do, so we have a chance to review the infomation.

Notes deleted after form is rejected

I have a form that includes a Notes field to which users can append notes. After 1) a note is added, 2) the approval status is changed to "rejected," and 3) a new note is added (putting
the form back into "pending" status), the previous note disappears.
Example:
Created form
Added
note 1
Rejected request
Added note 2. After this note was saved,
note 1 disappeared.
Added note 3
Added
note 4
Rejected request
Added note 5. After this note was saved,
note 4 disappeared.
At this point only notes 2, 3, and 5 are displayed on the form. Notes 1 and 3--the ones right before the rejection--have been lost, and aren't even in the version history of the form. I tested this
with approving the request and the notes remain, so the only issue is with rejection causing the latest note to be removed.
This is frustrating because bits of past correspondence are getting erased, and can't be referred back to.

it sounds like you're losing a version when you reject a form and returning to the previous version. You should confirm this by checking the version history before rejecting a form.
Do you have a workflow on this or is it using the OOTB approval workflow?

Dimension members were not deleted after refresh in Planning desktop

Similar Messages

Maybe you are looking for