" Dimension must be in details" during Journal Template Creation/Chan

Hi all
I have an issue while changing/Creating journal wizard from BPC ADMIN, getting " STRUCTURE CHANGE NOT ALLOWED" when selecting an dimenion to be on header level information.
current WEB Parameters: ALLOW_STRUCTURE CHANGES - YES for given application and current SP09 with NW7.5
your feed back/inputs are higly appreciated.
Thanks in Advance
Ramana

Hi Ramana,
I have found that the wording of this parameter is not as the documentation describes it.
Please try adding a parameter named ALLOW_CHANGE_STRUCTURE with value Yes.
Hope this helps,
Tom.

Similar Messages

Error"Dimension must be in Detail"

Hi BPC Folks,
When we are trying to create a journal template and checking off the dimensions error message is poping up " Dimension must be in detail".
could you guide on this?
apppreciating your attention.
Regards,
Sudhakar.

Hi Sanjay / Sudhakar
I am also getting the same error.
Could you please tell me how u fix it.
Thanks in advance
Aryan

How to fill appointment details during service ticket creation?

Hi experts,
I have a requirement wherein I need to populate a specific appointment type details i.e. APPT_TYPE(ex:ZCREATE, TICKET_CREATE..etc) for a service ticket when the service ticket is being created.
Although it can be done by CRM configuration, I want to do it through ABAP only.
Service tickets are being created in ICWebClient.
Reward points assured for helpful answers.
Regards,
Amit
Message was edited by:
Amit Kumar

Hi,
To achieve this, create an action in which you will place your code that is only triggerred once (you will need to decide what is the start condition for this new action)
It will need to do 2 things to set the information you want:
1. Use function module CRM_ORDER_MAINTAIN to set the appointment data
2. Call method REGISTER_FOR_SAVE in class CL_ACTION_EXECUTE to ensure the new information is saved onto the service ticket.
I have done this with other information setting on the service ticket during creation and it works fine.
Why are you not using config to do this ? Is it a special calculation for the date that is not catered for in configuration ??
Cheers
Colin.

"The system cannot create journal template"

While creating the journal template for my legalapplication using wizard i get the following error
"The system cannot create journal template"
am using category, group and time as my header dimension --
group dimension contains the LC.
please suggest what steps can be taken. Also while trying to access journal from etools we get the message journal not found.
Thanks

Hi Andy,
Please check how many sheets are in a default excel workbook on your client. If less than three, BPC fails to create the journal template. If that's the case, try setting default number of worksheets to 3, then retry journal template creation.
If the above is not the issue, then you'll have to check that reporting services is working correctly. As a first step, go to http://<app server name>/reportserver (or reportserver$<instancename> if you are using a reporting services instance and left it with the default name)
If that page compiles and shows without error, then try http://<app server name>/ reports (or reports$<instance name>) If that one also compiles/doesn't give errors, then reporting services is working.

BPC "The system cannot create the journal template"

I am trying to create a Journal template in BPC but whatever I do I get the error message "The system cannot create the journal template"
I am running BPC 5.1 and have tried with service pack 1 and now with service pack 5 installed. The system is on SQL Server 2000.
Has anyone come past this problem?

Hi Andy,
Please check how many sheets are in a default excel workbook on your client. If less than three, BPC fails to create the journal template. If that's the case, try setting default number of worksheets to 3, then retry journal template creation.
If the above is not the issue, then you'll have to check that reporting services is working correctly. As a first step, go to http://<app server name>/reportserver (or reportserver$<instancename> if you are using a reporting services instance and left it with the default name)
If that page compiles and shows without error, then try http://<app server name>/ reports (or reports$<instance name>) If that one also compiles/doesn't give errors, then reporting services is working.

Header dimension in Journal template

I have created a journal template, and notice that the Header dimension information is not displayed in the template, Only the detail input area is display. Anybody can help with this?

this is weird. What SP are you working on? There are a lot of issues with journals. for example saving and posting of journals does not work in SP 5 ...
D

Journal Template

is it possible to fix some default dimension members in journal template..for example the value datasrc allways have to be JOURNAL..
Also is it possible to rearrage the Journal Template looks for example Jounral ID and Group are coming to the lowerpart of the header ...can it be shifted to the upper part so that FIXED header dimension can come as last portion of Header Journal Template..
Appreicate inputs...

Hello,
For adding a fixed value of datasrc try this....
Limits to Dimension Members for Journal Entries
You can limit the number of dimension members that are available to users during journal entry. All base-level members that the user has access to are available when the user fills out a journal template. By using the EnableJRN property for a dimension, you can limit the members available to users when they double-click member cells in the journal template.
Features
You can limit journal dimension member lists by adding the property EnableJRN to the dimension for which you want to limit journal access. Then, in its dimension sheet, type a Y in the EnableJRN column of base-level members for which you want to allow users to post journal entries. Repeat this for each dimension you want to limit, and process the dimensions.
Also, I know of at least one project that had success with changing the journal template heavily for formatting. I did not test you exact changes but suspect this will be ok. Please note you will have to recreate the template which means historical journal entries are lost (SAP is chaning this in the future)
Hope this helps.
Cheers,
Chris

Can't open 1 document created using travel journal template

Since installing Snow Leopard yesterday I found out I can't open this one file I created using the travel journal template. All other Pages '09 files are fine. I just get this error message telling me Pages had to close my document "unexpectedly".
*"Pages quit unexpectedly while using the SFWordProcessing plug-in"*
Don't see why it would need to use this plug-in. And I don't recall choosing this plug-in. There must be a way around this. To open this file by turning off that plug-in perhaps. Unless it's absolutely necessary when using the templates. Or the "travel journal" template.

http://discussions.apple.com/thread.jspa?threadID=2141021&tstart=15

Error while creating Journal Template

Dear Experts
I am in process of re-creating Journal Template and got below error
(I have upgraded to BPC 7 NE SP8 - before this I was using the Journal!!!!)
Step1_Init : An error occured while parsing EntityName, Line 1, Position 2069
and then Journal Wizard wont display any dimensions to select the header dimensions
Any suggestions
Amar

Hi Shankar,
we have the same issue, but we are running on BPC NW 7.5 SP 06.
Did you find a solution?
Best regards
Gianfranco Vallese

Error while loading journal template in fdm 11.1.1.2

Hi Guys,
I am using Fdm 11.1.1.2. I am getting the following error while loading a journal template
The following error I am getting while loading the template while using the option Select file from inbox
Error- The remote server machine does not exist or is unavailable
The following error I am getting while loading the template using the option upload file
Error- file upload attempt failed.
Detail- access to the path c:\hyperion\products\financial data quality\web server components\website\temporary export files\admin******.temp is denied
An early response is highly appreciated
Thanks & Regards
pss

Hi,
Did you drop it as ADF table? Can you post the code snippet of your jspx page?
-Arun

Wrong comments In journal template

Hi.
I have created a journal template, the functionalitiy works fine.
I have a situation where I have entities and accounts where some have the same id's.
When you select an entity and account from the current view, it shows the comment as the description of the account or entity.
What I realised is that if I select the account and entity with the same id, then the entity shows the description of the account being selected.
Is there a way in which we can correct this, without changing the id's?
Thaks in advance

Hi,
You should think about the possibility of changing the id's which have the same names throughout all your dimensions.
In fact, it's not recommended to use same id's, and could bring to some problems like the one you're encountering.
Moreover, you can just notice that, when building an EVDRE form scratch and choosing the same id for Entity and Account dimension (for example), this will automatically display Entity:yourID and Account:yourID in the control panel. You can operate the test. But in any case, you should change all your ID's to be unique throughout all your dimensions.
In order to perform that, and not to loose any data, you should use the NEWID column in your excel dimension sheet.
Hope this will help you.
Kind Regards,
Patrick

Change journal template. 1000 separator

Hi experts,
I'm in version SAP BPC 5.1 MS and I need to change format cells of Journal template. I need to introduce 1000 separator on credit and debit cells.
Does it possible?
Than you very much in advance
Gabriel Garcia

Hello experts,
We finally could change it, but in other version SAP BPC 7.5. NW.
However you need to have the journal template password, and SAP support must changed you and save it in the properly root.
Regards,
Gabriel Garcí

LC Showing up as the default in Journal Template

Hello,
We no longer have LC in our RptCurrency Dimension, however, it still shows up from time to time. The most recent apperance is on the Journal Template. It shows up as the default RptCurrency which is odd because it is no where in the dimension. Can anyone tell me if LC is stored somewhere other then the RptCurrency Dimension that would make it appear as the default for the Journal Template. We have also seen it appear on the dynamic reports when they open like it thinks LC is in the current view even though it isn't in the dimension. Can anyone help on this issue? Thanks.
Jeremy Tull

Usually this information is download from server into client side.
If an user connect to server but didn't download the latest version of templates or dimensions it can appear an old version where you have LC into your RPTCurrency dimension and also an old journal template.
So I suggest to do a refresh client information and I think this will solve the problem.
(It can happen also in case if you have a dev environment with the same name of appset and in to that environment you still have old RPTCurency and old journal template).
Kind Regards
Sorin Radulescu

Error message when we try to save a journal template / table

Could anybody help us?
Attached you find the error message , when we tried to save a journal template:
We're using BPC Microsoft Version 7.5.104
#ERROR#AdminJournal##EPM-BPC-MS##2fe9a7f1-484d-429f-9a1b-7f155d5ea8a8###clsExcelHandler::SetExcelHeader#CDI
Administrator########Plain##[LOG ID:13]System.InvalidCastException: Unable to cast COM object of type 'System.__ComObject' to interface type 'Excel.Range'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{00020846-0000-0000-C000-000000000046}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
at Excel.ApplicationClass.get_ActiveCell()

Check and make sure that you can visit http:[server]/reports, for the reporting server. Does that work? If yes, I would make sure your DB has the APPSET_EXTRA database in addition to the APPSET in SQL DB. Also, when you process the Applications, via MOdify (full process), does it fail on step 8?
I have seen this before and it seems to be related to getting the structure correct for the Reports and reporting services. Hope this helps.

Transport details during GR

Hi all ,
I wanted to capture the Vehicle no ..and its relevant details during GR , is there any functionality available within SAP or there any work around
thanks ,
ksr

Hi.
If you want to capture vehical no & other stuffs of transportation & you already using all the fields in GR then go for BADI..
If your Vehical no & other details with respect single GR the use addtional Tab in Header or if these details with respect to items then add tab in item details.
Regards
S B H

" Dimension must be in details" during Journal Template Creation/Chan

Similar Messages

Maybe you are looking for