Dimension processing problems
Hi am trying to process a Dimension table but I always get the same error :A duplicate attribute key has been found when processing: Table: 'dbo_DimRestaurants', Column: 'RestoCity', Value: 'Richmond'. The attribute is 'City'.
After an health check this is the problem I get :
Attribute relationship [City] -> [Province] is not valid because it results
in a many-to-many relationship.
RestoCity
RestoProvince
Richmond
Colombie-Britannique
Richmond
Québec
Waterloo
Ontario
Waterloo
Québec
Windsor
Ontario
Windsor
Québec
How can I get this to work, this is something I do not quite get , yes the same city name can be repeated across different province, this dim have an hierarchy like this : restaurant -> city -> province -> country
This dim also contain ProvinceID and CountryID but I do not use it for mow or should I ?
Am I making a concept mistake here ? if so, I can I make the proper corrections
Thanks
I have found the solution, I needed to add the province to the key column City to make it works, I understand that I can add more than 1 columns to a attribute key column to make it unique
Similar Messages
-
TIME dimension processing fails saying "..attribute key cannot be found.." in EPM 10
After upgrading from version 7.5 to EPM 10, when we ran a ‘Full Process’ on the TIME dimension, it ran into an error saying “Errors in the OLAP storage engine: The attribute key cannot be found when processing: Table: 'dbo_tblFactCapEx', Column: 'TIMEID', Value: '20090013'. The attribute is 'Time_TIMEID'. (1/13/2015 2:41:02 PM)”.
Full error message is attached herewith – ‘Time Dimension Error.txt’
After researching, we did discover that MONTHNUM needed to be converted to BASE_PERIOD. Re-processed which produced the same error.
Prior to migration to version 7.5, we ran a full process on TIME dimension there. It completed successfully, confirming the issue is only with version 10.
Confirmed we could see the TIMEID value of 20090013 in the following places:
Time Dimension in the appropriate TIMEID attribute column.
Confirmed mbrTIME table had base member ID with TIMEID attribute filled out correctly.
Data in tblFactFINANCE could be pulled using that TIMEID
We truncated all the records in all the fact tables associated to this TIME dimension.
Eventually, when none of the tables had any records, the TIME dimension then processed successfully.
We this began to suspect the issue may not really be related to bad records.
We conducted one more test to confirm this.
Using an input form in EPM 10, we manually entered data in one of the models (at this point none of the fact tables have any records)
Ran Full Optimize on that model with Compress Database and Index Defragmentation checked – This step failed with the error attached in ‘MatrixRateFullOptimize.txt’
Ran Full process on Time Dimension – Failed indicating issue with TimeID 2012001 (that’s my manual entry). Attached error report ‘TimeDim Error MatrixRate.txt’
At this point, the table only contains the manually entered records (no suspected bad records)
We then suspected there could have been an issue with the upgrade process.
So we reprocessed all the dimension and optimized all the models in version 7.5, made a new backup and restored it to version 10.
The issue still persisted!
At this point, we have tried all the possibilities we could think of. Each time the fact table is populated with records, the TIME dimension process fails indicating ‘the attribute key’ cannot be found.
There is probably something in the OLAP partition that is not able to link the dimension attributes to the cubes.
Additional Information:
Please find attached the existing Time Dimension – TimeDimensionMembers.xlxs
Version of Excel used: Excel 2007, SP3 MSO (12.0.6683.5000)
System Specs: Please see screenshot below.Thank you all for responding! This issue is resolved.
Here’s what the issue was:
The time structure is TOTAL >> Years >> Quarters >> Months (e.g. T.ALL >> 2012.TOTAL >> 2012.Q1 >> 2012.P01)
As shown in the screenshot below, the LEVEL for ‘T.ALL’ member was set to YEAR, which is incorrect (we can’t have Year rolling up to a Year)
We changed the LEVEL to ‘TOTAL’ and this fixed the issue!!
If only it gave a better error message than the “..attribute key not found” message -
AVCD on MAC: are there any processing problems using say, VLC?
AVCD on MAC: are there any processing problems using say, VLC?
We've actually found that the Server 10.6.3 DVD does an amazingly smooth job of upgrading 10.5.8. We've been upgrading our production servers and nothing has gone wrong yet. Snow Leopard employs an archive and install method of upgrading which results in an install which is very close to a clean install. So it's been very convenient for us because our servers are used as Windows PDCs and it's a pain in the *** to have to re-join all PCs to the domain if we start from scratch.
-
BPC MS 10 Version - Dimension processing
Hi All,
We have an issue with the dimension processing, some of the base members have CALC - "Y" property. How can we reset the CALC property at base member level in a given dimension member...
Thanks for your help in advance.Hi Syed,
if you are sure that there are base members and not parent with CALC property equal to "Y" you have to follow this note 1879932 - BPC MS: CALC Property is set to "Y" for a BASE and Non-Formula Dimension changing manually this property setting and processing the dimension.
Regards
Roberto -
Schedule Dimension processing in the background
in BPC 7.5 MS version , it is possible to schedule , dimension processing in the background
Yes you have DM package for all administrative tasks more and less which can be schedule into background.
Any DM package as you know can be schedule.
Just check the DM packages from folder: Apshell\PLANNING\DataManager\PackageFiles\Examples.
Especially AdminTask_Process.dtsx is the one which I think is what you need.
Regards
Sorin Radulescu -
Create Balance Dimension process
Hi I am using International HRMS.
I need to know that whether User Defined balances are supported for International HRMS or not.
Has anyone used it with Global HR. By default "Create Balance Dimension process" is not available in the request group "Global HR and Payroll Processes"
Regards
Anwar
Edited by: faanwar on Jul 1, 2009 10:17 AMBalances are supported in International Hrms.
You should run first a concurrent program to create your proper legislation (copy from ZZ), and as such some balance dimensions will be available to your legislation. "International HRMS Setup" if i recall well. -
AWM - error duirng maintain dimension process
I get the following error when selecting the maintain option on the product dimension (PROD):
An error has occurred on the server
Error class: Express Failure
Server error descriptions:
INI: Error creating a definition manager, Generic at TxsOqConnection::generic<BuildProcess>
INI: XOQ-01711: Aggregation path for hierarchies on a dimension "PROD" is inconsistent, Generic at TxsOqStdFormCommand::execute
I am running awm11.1.0.7.0B on db version 11G 11.1.0.7.0.
Any ideas on what this means?
Thanks,
Frank
Edited by: bmwrider on Sep 18, 2009 11:54 AM
Edited by: bmwrider on Sep 18, 2009 11:57 AMThe error indicates that there are some loops in your hierarchy (e.g: circular loop within same hierarchy) or inconsistencies in the definition of a specific member across hierarchies (e.g: each hierarchy is well defined on its own but one or more members of the dimension, present in multiple hierarchies, are defined inconsistently, in terms of its descendants, across hierarchies).
If you have enabled the create dimension Materialized View option, try disabling it and rebuild/maintain the dimension. The build process for the dimension with "create MV" option enabled enforces stricter data quality checks than if this option is disabled (dimension MV not required/not created/not used for Query Rewrite).
Also see links:
[Thread: problem maintaining cube |http://forums.oracle.com/forums/thread.jspa?messageID=3507124�]
[Thread: Error while populating Dimension |http://forums.oracle.com/forums/click.jspa?searchID=-1&messageID=3270334] -
Dear BPC Experts:
I am using BPC 7.5 NW SP10, and just transport form Development to Production, When I am processing the dimensions in BPC admin, the processing stops in the waiting for the server response. Does anyone have any solution for this problem?
BRs,
Fred ChengHi Rohita,
There are two things.
1) Do not process the BDoc
2) Do not generate the BDoc.
1) To stop the processing of BDoc, DeRegister the CRM Q. go to transaction SMQR and de register the Q. it will stop the processing the BDoc.
2) Go to TCode SMW3_00. Define the BDoc type and select do not send BDoc.
Let me know if it helps you. -
Dsee 6.2, idsconfig, vlv index processing problems
Hey Folks,
I ran into a problem where the idsconfig script failed on creating 4 vlvindex entries. I had to modify the script to allow me to troubleshoot the problem. I ended up fixing the problem manually, but I'm still not to sure why it happened to begin with. It seems like a race condition, but i could be dead wrong. I thought it might have been the way I answered the idsconfig questions but I went over it quite a bit. This post may be a bit long, but I want to provide enough information.
- Solaris 10 08/07 fully patched (using smpatch) as of 1/10/2008
- DSEE 6.2
- idsconfig that comes bundled with Solaris 10 08/07
- All this is being done inside a logical domain (ldom) on a T2000 using a file image as a disk
The first thing I did was make the following modifications to the idsconfig script so it would not exit on error while adding vlv index entries, and also commented out the cleanup process so I could view the temp file created by idsconfig
Original Code from the add_vlv_indexes() function:
# Add the index.
${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/vlv_index_${i} ${VERB}"
if [ $? -ne 0 ]; then
${ECHO} " ERROR: Adding VLV index for ${i} failed!"
cleanup
exit 1
fiSame code, after my modifications:
# Add the index.
${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/vlv_index_${i} ${VERB}"
if [ $? -ne 0 ]; then
${ECHO} " ERROR: Adding VLV index for ${i} failed!"
#cleanup
#exit 1
fiHere is the full output of the way I used idsconfig to configure the directory:
It is strongly recommended that you BACKUP the directory server
before running idsconfig.
Hit Ctrl-C at any time before the final confirmation to exit.
Do you wish to continue with server setup (y/n/h)? [n] y
Enter the JES Directory Server's hostname to setup: machinename-ldom1
Enter the port number for iDS (h=help): [389]
Enter the directory manager DN: [cn=Directory Manager]
Enter passwd for cn=Directory Manager :
Enter the domainname to be served (h=help): [example.edu]
Enter LDAP Base DN (h=help): [dc=example,dc=edu]
Checking LDAP Base DN ...
Validating LDAP Base DN and Suffix ...
sasl/GSSAPI is not supported by this LDAP server
Enter the profile name (h=help): [default]
Default server list (h=help): [10.1.8.15]
Preferred server list (h=help):
Choose desired search scope (one, sub, h=help): [one]
The following are the supported credential levels:
1 anonymous
2 proxy
3 proxy anonymous
4 self
5 self proxy
6 self proxy anonymous
Choose Credential level [h=help]: [1] 2
The following are the supported Authentication Methods:
1 none
2 simple
3 sasl/DIGEST-MD5
4 tls:simple
5 tls:sasl/DIGEST-MD5
6 sasl/GSSAPI
Choose Authentication Method (h=help): [1] 2
Current authenticationMethod: simple
Do you want to add another Authentication Method? n
Do you want the clients to follow referrals (y/n/h)? [n]
Do you want to modify the server timelimit value (y/n/h)? [n]
Do you want to modify the server sizelimit value (y/n/h)? [n]
Do you want to store passwords in "crypt" format (y/n/h)? [n]
Do you want to setup a Service Authentication Methods (y/n/h)? [n] y
Do you want to setup a Service Auth. Method for "pam_ldap" (y/n/h)? [n] y
The following are the supported Authentication Methods:
1 simple
2 sasl/DIGEST-MD5
3 tls:simple
4 tls:sasl/DIGEST-MD5
5 sasl/GSSAPI
Choose Service Authentication Method: [1] 1
Current authenticationMethod: pam_ldap:simple
Do you want to add another Authentication Method? n
Do you want to setup a Service Auth. Method for "keyserv" (y/n/h)? [n]
Do you want to setup a Service Auth. Method for "passwd-cmd" (y/n/h)? [n] y
The following are the supported Authentication Methods:
1 simple
2 sasl/DIGEST-MD5
3 tls:simple
4 tls:sasl/DIGEST-MD5
5 sasl/GSSAPI
Choose Service Authentication Method: [1] 1
Current authenticationMethod: passwd-cmd:simple
Do you want to add another Authentication Method? n
Client search time limit in seconds (h=help): [30]
Profile Time To Live in seconds (h=help): [43200]
Bind time limit in seconds (h=help): [10]
Do you wish to setup Service Search Descriptors (y/n/h)? [n] n
Summary of Configuration
1 Domain to serve : example.edu
2 Base DN to setup : dc=example,dc=edu
3 Profile name to create : default
4 Default Server List : 10.1.8.15
5 Preferred Server List :
6 Default Search Scope : one
7 Credential Level : proxy
8 Authentication Method : simple
9 Enable Follow Referrals : FALSE
10 iDS Time Limit :
11 iDS Size Limit :
12 Enable crypt password storage : FALSE
13 Service Auth Method pam_ldap : pam_ldap:simple
14 Service Auth Method keyserv :
15 Service Auth Method passwd-cmd: passwd-cmd:simple
16 Search Time Limit : 30
17 Profile Time to Live : 43200
18 Bind Limit : 10
19 Service Search Descriptors Menu
Enter config value to change: (1-19 0=commit changes) [0]
Enter DN for proxy agent: [cn=proxyagent,ou=profile,dc=example,dc=edu] uid=admin-user,ou=People,dc=example,dc=edu
Enter passwd for proxyagent:
Re-enter passwd:
ERROR: passwords don't match; try again.
Enter passwd for proxyagent:
Re-enter passwd:
WARNING: About to start committing changes. (y=continue, n=EXIT) y
1. Schema attributes have been updated.
2. Schema objectclass definitions have been added.
3. NisDomainObject added to dc=example,dc=edu.
4. Top level "ou" containers complete.
5. automount maps: auto_home auto_direct auto_master auto_shared processed.
6. ACI for dc=example,dc=edu modified to disable self modify.
7. Add of VLV Access Control Information (ACI).
8. Proxy Agent uid=admin-user,ou=People,dc=example,dc=edu already exists.
9. Give uid=admin-user,ou=People,dc=example,dc=edu read permission for password.
10. Generated client profile and loaded on server.
11. Processing eq,pres indexes:
uidNumber (eq,pres) Finished indexing.
ipNetworkNumber (eq,pres) Finished indexing.
gidnumber (eq,pres) Finished indexing.
oncrpcnumber (eq,pres) Finished indexing.
automountKey (eq,pres) Finished indexing.
12. Processing eq,pres,sub indexes:
ipHostNumber (eq,pres,sub) Finished indexing.
membernisnetgroup (eq,pres,sub) Finished indexing.
nisnetgrouptriple (eq,pres,sub) Finished indexing.
13. Processing VLV indexes:
example.edu.getgrent vlv_index Entry created
example.edu.gethostent vlv_index Entry created
example.edu.getnetent vlv_index Entry created
ERROR: Adding VLV index for example.edu.getpwent failed!
example.edu.getpwent vlv_index Entry created
example.edu.getrpcent vlv_index Entry created
ERROR: Adding VLV index for example.edu.getspent failed!
example.edu.getspent vlv_index Entry created
example.edu.getauhoent vlv_index Entry created
ERROR: Adding VLV index for example.edu.getsoluent failed!
example.edu.getsoluent vlv_index Entry created
ERROR: Adding VLV index for example.edu.getauduent failed!
example.edu.getauduent vlv_index Entry created
example.edu.getauthent vlv_index Entry created
example.edu.getexecent vlv_index Entry created
example.edu.getprofent vlv_index Entry created
example.edu.getmailent vlv_index Entry created
example.edu.getbootent vlv_index Entry created
example.edu.getethent vlv_index Entry created
example.edu.getngrpent vlv_index Entry created
example.edu.getipnent vlv_index Entry created
example.edu.getmaskent vlv_index Entry created
example.edu.getprent vlv_index Entry created
example.edu.getip4ent vlv_index Entry created
example.edu.getip6ent vlv_index Entry created
idsconfig: Setup of iDS server machinename-ldom1 is complete.
Note: idsconfig has created entries for VLV indexes. Use the
directoryserver(1m) script on machinename-ldom1 to stop
the server and then enter the following vlvindex
sub-commands to create the actual VLV indexes:
directoryserver -s inst_name vlvindex -n example -T example.edu.getgrent
directoryserver -s inst_name vlvindex -n example -T example.edu.gethostent
directoryserver -s inst_name vlvindex -n example -T example.edu.getnetent
directoryserver -s inst_name vlvindex -n example -T example.edu.getpwent
directoryserver -s inst_name vlvindex -n example -T example.edu.getrpcent
directoryserver -s inst_name vlvindex -n example -T example.edu.getspent
directoryserver -s inst_name vlvindex -n example -T example.edu.getauhoent
directoryserver -s inst_name vlvindex -n example -T example.edu.getsoluent
directoryserver -s inst_name vlvindex -n example -T example.edu.getauduent
directoryserver -s inst_name vlvindex -n example -T example.edu.getauthent
directoryserver -s inst_name vlvindex -n example -T example.edu.getexecent
directoryserver -s inst_name vlvindex -n example -T example.edu.getprofent
directoryserver -s inst_name vlvindex -n example -T example.edu.getmailent
directoryserver -s inst_name vlvindex -n example -T example.edu.getbootent
directoryserver -s inst_name vlvindex -n example -T example.edu.getethent
directoryserver -s inst_name vlvindex -n example -T example.edu.getngrpent
directoryserver -s inst_name vlvindex -n example -T example.edu.getipnent
directoryserver -s inst_name vlvindex -n example -T example.edu.getmaskent
directoryserver -s inst_name vlvindex -n example -T example.edu.getprent
directoryserver -s inst_name vlvindex -n example -T example.edu.getip4ent
directoryserver -s inst_name vlvindex -n example -T example.edu.getip6entSince I still had the temp files to look through I was able to find out what entries where not created, and manually added them myself without problems.
The four entries were:
ERROR: Adding VLV index for example.edu.getpwent failed!
ERROR: Adding VLV index for example.edu.getspent failed!
ERROR: Adding VLV index for example.edu.getsoluent failed!
ERROR: Adding VLV index for example.edu.getauduent failed!I then was able to run the following commands successfully:
dsadm reindex -l -t example.edu.getgrent /usr/local/ds6-instances/slapd-inst_name dc=example,dc=edu
dsadm reindex -l -t example.edu.gethostent /usr/local/ds6-instances/slapd-inst_name dc=example,dc=edu
dsadm reindex -l -t example.edu.getnetent /usr/local/ds6-instances/slapd-inst_name dc=example,dc=edu
dsadm reindex -l -t example.edu.getrpcent /usr/local/ds6-instances/slapd-inst_name dc=example,dc=edu
dsadm reindex -l -t example.edu.getspent /usr/local/ds6-instances/slapd-inst_name dc=example,dc=edu
dsadm reindex -l -t example.edu.getauhoent /usr/local/ds6-instances/slapd-inst_name dc=example,dc=edu
dsadm reindex -l -t example.edu.getauhoent /usr/local/ds6-instances/slapd-inst_name dc=example,dc=edu
dsadm reindex -l -t example.edu.getsoluent /usr/local/ds6-instances/slapd-inst_name dc=example,dc=edu
dsadm reindex -l -t example.edu.getauhoent /usr/local/ds6-instances/slapd-inst_name dc=example,dc=edu
dsadm reindex -l -t example.edu.getauduent /usr/local/ds6-instances/slapd-inst_name dc=example,dc=edu
dsadm reindex -l -t example.edu.getauthent /usr/local/ds6-instances/slapd-inst_name dc=example,dc=edu
dsadm reindex -l -t example.edu.getexecent /usr/local/ds6-instances/slapd-inst_name dc=example,dc=edu
dsadm reindex -l -t example.edu.getprofent /usr/local/ds6-instances/slapd-inst_name dc=example,dc=edu
dsadm reindex -l -t example.edu.getmailent /usr/local/ds6-instances/slapd-inst_name dc=example,dc=edu
dsadm reindex -l -t example.edu.getbootent /usr/local/ds6-instances/slapd-inst_name dc=example,dc=edu
dsadm reindex -l -t example.edu.getethent /usr/local/ds6-instances/slapd-inst_name dc=example,dc=edu
dsadm reindex -l -t example.edu.getngrpent /usr/local/ds6-instances/slapd-inst_name dc=example,dc=edu
dsadm reindex -l -t example.edu.getipnent /usr/local/ds6-instances/slapd-inst_name dc=example,dc=edu
dsadm reindex -l -t example.edu.getmaskent /usr/local/ds6-instances/slapd-inst_name dc=example,dc=edu
dsadm reindex -l -t example.edu.getprent /usr/local/ds6-instances/slapd-inst_name dc=example,dc=edu
dsadm reindex -l -t example.edu.getip4ent /usr/local/ds6-instances/slapd-inst_name dc=example,dc=edu
dsadm reindex -l -t example.edu.getip6ent /usr/local/ds6-instances/slapd-inst_name dc=example,dc=eduIm really not sure why I ran into this problem, and was hoping someone would be able to shine some light on something that i possibly could have done wrong. I have read blogs about others running this script on dsee 6.x successfully, so thinking its a bug doesn't seem right.
If anyone wants me to test something or provide more info, i'd be happy to.
Thanks for reading,
Deejam
Edited by: Deejam on Jan 14, 2008 3:44 PM
Edited by: Deejam on Jan 14, 2008 7:57 PMThanks for the response. Sorry about not including the logs. I should have. I have gathered the full logs during the time idsconfig was trying to add the vlvindex entries. I did see that there where a few err=32 codes on the ADD operations on the entries that I had to add manually.
Here is one thing I did notice when I was adding the 4 entries manually. In each of the ldif files idsconfig creates, there are 2 entries as in the following example.
dn: cn=example.edu_passwd_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config
objectClass: top
objectClass: vlvSearch
cn: example.edu_passwd_vlv_index
vlvbase: ou=people,dc=example,dc=edu
vlvscope: 1
vlvfilter: (objectClass=posixAccount)
aci: (target="ldap:///cn=example.edu_passwd_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config")(targetattr="*")(version 3.0; acl "Config";allow(read,search,compare)userdn="ldap:///anyone";)
dn: cn=example.edu.getpwent,cn=example.edu_passwd_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config
cn: example.edu.getpwent
vlvSort: cn uid
objectclass: top
objectclass: vlvIndex After idsconfig was done running the entry with the dn of "dn: cn=example.edu_passwd_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config" was created, but the "dn: cn=example.edu.getpwent,cn=example.edu_passwd_vlv_index,cn=example,cn=ldbm" was not created.
This is weird because according to the logs (if i am reading them right) the add operation for the dn that was actually created seemed like it failed.
[14/Jan/2008:14:34:34 -0600] conn=115 op=-1 msgId=-1 - fd=54 slot=54 LDAP connection from 192.168.1.1:33406 to 192.168.1.1
[14/Jan/2008:14:34:34 -0600] conn=115 op=0 msgId=1 - BIND dn="cn=Directory Manager" method=128 version=3
[14/Jan/2008:14:34:34 -0600] conn=115 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=directory manager"
[14/Jan/2008:14:34:34 -0600] conn=115 op=1 msgId=2 - ADD dn="cn=example.edu_passwd_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config"
[14/Jan/2008:14:34:34 -0600] conn=115 op=1 msgId=2 - RESULT err=32 tag=105 nentries=0 etime=0
[14/Jan/2008:14:34:34 -0600] conn=115 op=2 msgId=3 - UNBIND
[14/Jan/2008:14:34:34 -0600] conn=115 op=2 msgId=-1 - closing from 192.168.1.1:33406 - U1 - Connection closed by unbind client -
[14/Jan/2008:14:34:35 -0600] conn=115 op=1 msgId=2 - RESULT err=0 tag=105 nentries=0 etime=1
[14/Jan/2008:14:34:35 -0600] conn=115 op=-1 msgId=-1 - closed.So in fixing it manually I just fed an ldif file that looked like the following:
dn: cn=example.edu.getpwent,cn=example.edu_passwd_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config
changetype: add
cn: example.edu.getpwent
vlvSort: cn uid
objectclass: top
objectclass: vlvIndexThanks again for the help, and as mentioned before, i will be happy to test, or provide more information,
Deejam
Here are the logs as mentioned above.
[14/Jan/2008:14:34:33 -0600] conn=108 op=-1 msgId=-1 - fd=51 slot=51 LDAP connection from 192.168.1.1:33399 to 192.168.1.1
[14/Jan/2008:14:34:33 -0600] conn=108 op=0 msgId=1 - SRCH base="cn=example.edu.getgrent,cn=example.edu_group_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config" scope=0 filter="(objectClass=*)" attrs=ALL
[14/Jan/2008:14:34:33 -0600] conn=108 op=0 msgId=1 - RESULT err=32 tag=101 nentries=0 etime=0
[14/Jan/2008:14:34:33 -0600] conn=108 op=1 msgId=2 - UNBIND
[14/Jan/2008:14:34:33 -0600] conn=108 op=1 msgId=-1 - closing from 192.168.1.1:33399 - U1 - Connection closed by unbind client -
[14/Jan/2008:14:34:33 -0600] conn=109 op=-1 msgId=-1 - fd=54 slot=54 LDAP connection from 192.168.1.1:33400 to 192.168.1.1
[14/Jan/2008:14:34:33 -0600] conn=108 op=-1 msgId=-1 - closed.
[14/Jan/2008:14:34:33 -0600] conn=109 op=0 msgId=1 - BIND dn="cn=Directory Manager" method=128 version=3
[14/Jan/2008:14:34:33 -0600] conn=109 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=directory manager"
[14/Jan/2008:14:34:33 -0600] conn=109 op=1 msgId=2 - ADD dn="cn=example.edu_group_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config"
[14/Jan/2008:14:34:33 -0600] conn=109 op=1 msgId=2 - RESULT err=0 tag=105 nentries=0 etime=0
[14/Jan/2008:14:34:33 -0600] conn=109 op=2 msgId=3 - ADD dn="cn=example.edu.getgrent,cn=example.edu_group_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config"
[14/Jan/2008:14:34:34 -0600] conn=109 op=2 msgId=3 - RESULT err=0 tag=105 nentries=0 etime=1
[14/Jan/2008:14:34:34 -0600] conn=109 op=3 msgId=4 - UNBIND
[14/Jan/2008:14:34:34 -0600] conn=109 op=3 msgId=-1 - closing from 192.168.1.1:33400 - U1 - Connection closed by unbind client -
[14/Jan/2008:14:34:34 -0600] conn=110 op=-1 msgId=-1 - fd=51 slot=51 LDAP connection from 192.168.1.1:33401 to 192.168.1.1
[14/Jan/2008:14:34:34 -0600] conn=109 op=-1 msgId=-1 - closed.
[14/Jan/2008:14:34:34 -0600] conn=110 op=0 msgId=1 - SRCH base="cn=example.edu.gethostent,cn=example.edu_hosts_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config" scope=0 filter="(objectClass=*)" attrs=ALL
[14/Jan/2008:14:34:34 -0600] conn=110 op=0 msgId=1 - RESULT err=32 tag=101 nentries=0 etime=0
[14/Jan/2008:14:34:34 -0600] conn=110 op=1 msgId=2 - UNBIND
[14/Jan/2008:14:34:34 -0600] conn=110 op=1 msgId=-1 - closing from 192.168.1.1:33401 - U1 - Connection closed by unbind client -
[14/Jan/2008:14:34:34 -0600] conn=111 op=-1 msgId=-1 - fd=54 slot=54 LDAP connection from 192.168.1.1:33402 to 192.168.1.1
[14/Jan/2008:14:34:34 -0600] conn=110 op=-1 msgId=-1 - closed.
[14/Jan/2008:14:34:34 -0600] conn=111 op=0 msgId=1 - BIND dn="cn=Directory Manager" method=128 version=3
[14/Jan/2008:14:34:34 -0600] conn=111 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=directory manager"
[14/Jan/2008:14:34:34 -0600] conn=111 op=1 msgId=2 - ADD dn="cn=example.edu_hosts_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config"
[14/Jan/2008:14:34:34 -0600] conn=111 op=1 msgId=2 - RESULT err=0 tag=105 nentries=0 etime=0
[14/Jan/2008:14:34:34 -0600] conn=111 op=2 msgId=3 - ADD dn="cn=example.edu.gethostent,cn=example.edu_hosts_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config"
[14/Jan/2008:14:34:34 -0600] conn=111 op=2 msgId=3 - RESULT err=0 tag=105 nentries=0 etime=0
[14/Jan/2008:14:34:34 -0600] conn=111 op=3 msgId=4 - UNBIND
[14/Jan/2008:14:34:34 -0600] conn=111 op=3 msgId=-1 - closing from 192.168.1.1:33402 - U1 - Connection closed by unbind client -
[14/Jan/2008:14:34:34 -0600] conn=112 op=-1 msgId=-1 - fd=51 slot=51 LDAP connection from 192.168.1.1:33403 to 192.168.1.1
[14/Jan/2008:14:34:34 -0600] conn=111 op=-1 msgId=-1 - closed.
[14/Jan/2008:14:34:34 -0600] conn=112 op=0 msgId=1 - SRCH base="cn=example.edu.getnetent,cn=example.edu_networks_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config" scope=0 filter="(objectClass=*)" attrs=ALL
[14/Jan/2008:14:34:34 -0600] conn=112 op=0 msgId=1 - RESULT err=32 tag=101 nentries=0 etime=0
[14/Jan/2008:14:34:34 -0600] conn=112 op=1 msgId=2 - UNBIND
[14/Jan/2008:14:34:34 -0600] conn=112 op=1 msgId=-1 - closing from 192.168.1.1:33403 - U1 - Connection closed by unbind client -
[14/Jan/2008:14:34:34 -0600] conn=113 op=-1 msgId=-1 - fd=54 slot=54 LDAP connection from 192.168.1.1:33404 to 192.168.1.1
[14/Jan/2008:14:34:34 -0600] conn=112 op=-1 msgId=-1 - closed.
[14/Jan/2008:14:34:34 -0600] conn=113 op=0 msgId=1 - BIND dn="cn=Directory Manager" method=128 version=3
[14/Jan/2008:14:34:34 -0600] conn=113 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=directory manager"
[14/Jan/2008:14:34:34 -0600] conn=113 op=1 msgId=2 - ADD dn="cn=example.edu_networks_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config"
[14/Jan/2008:14:34:34 -0600] conn=113 op=1 msgId=2 - RESULT err=0 tag=105 nentries=0 etime=0
[14/Jan/2008:14:34:34 -0600] conn=113 op=2 msgId=3 - ADD dn="cn=example.edu.getnetent,cn=example.edu_networks_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config"
[14/Jan/2008:14:34:34 -0600] conn=113 op=2 msgId=3 - RESULT err=0 tag=105 nentries=0 etime=0
[14/Jan/2008:14:34:34 -0600] conn=113 op=3 msgId=4 - UNBIND
[14/Jan/2008:14:34:34 -0600] conn=113 op=3 msgId=-1 - closing from 192.168.1.1:33404 - U1 - Connection closed by unbind client -
[14/Jan/2008:14:34:34 -0600] conn=114 op=-1 msgId=-1 - fd=51 slot=51 LDAP connection from 192.168.1.1:33405 to 192.168.1.1
[14/Jan/2008:14:34:34 -0600] conn=113 op=-1 msgId=-1 - closed.
[14/Jan/2008:14:34:34 -0600] conn=114 op=0 msgId=1 - SRCH base="cn=example.edu.getpwent,cn=example.edu_passwd_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config" scope=0 filter="(objectClass=*)" attrs=ALL
[14/Jan/2008:14:34:34 -0600] conn=114 op=0 msgId=1 - RESULT err=32 tag=101 nentries=0 etime=0
[14/Jan/2008:14:34:34 -0600] conn=114 op=1 msgId=2 - UNBIND
[14/Jan/2008:14:34:34 -0600] conn=114 op=1 msgId=-1 - closing from 192.168.1.1:33405 - U1 - Connection closed by unbind client -
[14/Jan/2008:14:34:34 -0600] conn=115 op=-1 msgId=-1 - fd=54 slot=54 LDAP connection from 192.168.1.1:33406 to 192.168.1.1
[14/Jan/2008:14:34:34 -0600] conn=114 op=-1 msgId=-1 - closed.
[14/Jan/2008:14:34:34 -0600] conn=115 op=0 msgId=1 - BIND dn="cn=Directory Manager" method=128 version=3
[14/Jan/2008:14:34:34 -0600] conn=115 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=directory manager"
[14/Jan/2008:14:34:34 -0600] conn=115 op=1 msgId=2 - ADD dn="cn=example.edu_passwd_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config"
[14/Jan/2008:14:34:34 -0600] conn=115 op=1 msgId=2 - RESULT err=32 tag=105 nentries=0 etime=0
[14/Jan/2008:14:34:34 -0600] conn=115 op=2 msgId=3 - UNBIND
[14/Jan/2008:14:34:34 -0600] conn=115 op=2 msgId=-1 - closing from 192.168.1.1:33406 - U1 - Connection closed by unbind client -
[14/Jan/2008:14:34:35 -0600] conn=115 op=1 msgId=2 - RESULT err=0 tag=105 nentries=0 etime=1
[14/Jan/2008:14:34:35 -0600] conn=116 op=-1 msgId=-1 - fd=51 slot=51 LDAP connection from 192.168.1.1:33407 to 192.168.1.1
[14/Jan/2008:14:34:35 -0600] conn=115 op=-1 msgId=-1 - closed.
[14/Jan/2008:14:34:35 -0600] conn=116 op=0 msgId=1 - SRCH base="cn=example.edu.getrpcent,cn=example.edu_rpc_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config" scope=0 filter="(objectClass=*)" attrs=ALL
[14/Jan/2008:14:34:35 -0600] conn=116 op=0 msgId=1 - RESULT err=32 tag=101 nentries=0 etime=0
[14/Jan/2008:14:34:35 -0600] conn=116 op=1 msgId=2 - UNBIND
[14/Jan/2008:14:34:35 -0600] conn=116 op=1 msgId=-1 - closing from 192.168.1.1:33407 - U1 - Connection closed by unbind client -
[14/Jan/2008:14:34:35 -0600] conn=117 op=-1 msgId=-1 - fd=54 slot=54 LDAP connection from 192.168.1.1:33408 to 192.168.1.1
[14/Jan/2008:14:34:35 -0600] conn=116 op=-1 msgId=-1 - closed.
[14/Jan/2008:14:34:35 -0600] conn=117 op=0 msgId=1 - BIND dn="cn=Directory Manager" method=128 version=3
[14/Jan/2008:14:34:35 -0600] conn=117 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=directory manager"
[14/Jan/2008:14:34:35 -0600] conn=117 op=1 msgId=2 - ADD dn="cn=example.edu_rpc_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config"
[14/Jan/2008:14:34:35 -0600] conn=117 op=1 msgId=2 - RESULT err=0 tag=105 nentries=0 etime=0
[14/Jan/2008:14:34:35 -0600] conn=117 op=2 msgId=3 - ADD dn="cn=example.edu.getrpcent,cn=example.edu_rpc_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config"
[14/Jan/2008:14:34:35 -0600] conn=117 op=2 msgId=3 - RESULT err=0 tag=105 nentries=0 etime=0
[14/Jan/2008:14:34:35 -0600] conn=117 op=3 msgId=4 - UNBIND
[14/Jan/2008:14:34:35 -0600] conn=117 op=3 msgId=-1 - closing from 192.168.1.1:33408 - U1 - Connection closed by unbind client -
[14/Jan/2008:14:34:35 -0600] conn=118 op=-1 msgId=-1 - fd=51 slot=51 LDAP connection from 192.168.1.1:33409 to 192.168.1.1
[14/Jan/2008:14:34:35 -0600] conn=117 op=-1 msgId=-1 - closed.
[14/Jan/2008:14:34:35 -0600] conn=118 op=0 msgId=1 - SRCH base="cn=example.edu.getspent,cn=example.edu_shadow_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config" scope=0 filter="(objectClass=*)" attrs=ALL
[14/Jan/2008:14:34:35 -0600] conn=118 op=0 msgId=1 - RESULT err=32 tag=101 nentries=0 etime=0
[14/Jan/2008:14:34:35 -0600] conn=118 op=1 msgId=2 - UNBIND
[14/Jan/2008:14:34:35 -0600] conn=118 op=1 msgId=-1 - closing from 192.168.1.1:33409 - U1 - Connection closed by unbind client -
[14/Jan/2008:14:34:35 -0600] conn=119 op=-1 msgId=-1 - fd=54 slot=54 LDAP connection from 192.168.1.1:33410 to 192.168.1.1
[14/Jan/2008:14:34:35 -0600] conn=118 op=-1 msgId=-1 - closed.
[14/Jan/2008:14:34:35 -0600] conn=119 op=0 msgId=1 - BIND dn="cn=Directory Manager" method=128 version=3
[14/Jan/2008:14:34:35 -0600] conn=119 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=directory manager"
[14/Jan/2008:14:34:35 -0600] conn=119 op=1 msgId=2 - ADD dn="cn=example.edu_shadow_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config"
[14/Jan/2008:14:34:35 -0600] conn=119 op=1 msgId=2 - RESULT err=32 tag=105 nentries=0 etime=0
[14/Jan/2008:14:34:35 -0600] conn=119 op=2 msgId=3 - UNBIND
[14/Jan/2008:14:34:35 -0600] conn=119 op=2 msgId=-1 - closing from 192.168.1.1:33410 - U1 - Connection closed by unbind client -
[14/Jan/2008:14:34:35 -0600] conn=119 op=1 msgId=2 - RESULT err=0 tag=105 nentries=0 etime=0
[14/Jan/2008:14:34:35 -0600] conn=120 op=-1 msgId=-1 - fd=51 slot=51 LDAP connection from 192.168.1.1:33411 to 192.168.1.1
[14/Jan/2008:14:34:35 -0600] conn=119 op=-1 msgId=-1 - closed.
[14/Jan/2008:14:34:35 -0600] conn=120 op=0 msgId=1 - SRCH base="cn=example.edu.getauhoent,cn=example.edu_auho_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config" scope=0 filter="(objectClass=*)" attrs=ALL
[14/Jan/2008:14:34:35 -0600] conn=120 op=0 msgId=1 - RESULT err=32 tag=101 nentries=0 etime=0
[14/Jan/2008:14:34:35 -0600] conn=120 op=1 msgId=2 - UNBIND
[14/Jan/2008:14:34:35 -0600] conn=120 op=1 msgId=-1 - closing from 192.168.1.1:33411 - U1 - Connection closed by unbind client -
[14/Jan/2008:14:34:35 -0600] conn=121 op=-1 msgId=-1 - fd=54 slot=54 LDAP connection from 192.168.1.1:33412 to 192.168.1.1
[14/Jan/2008:14:34:35 -0600] conn=120 op=-1 msgId=-1 - closed.
[14/Jan/2008:14:34:35 -0600] conn=121 op=0 msgId=1 - BIND dn="cn=Directory Manager" method=128 version=3
[14/Jan/2008:14:34:35 -0600] conn=121 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=directory manager"
[14/Jan/2008:14:34:35 -0600] conn=121 op=1 msgId=2 - ADD dn="cn=example.edu_auho_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config"
[14/Jan/2008:14:34:35 -0600] conn=121 op=1 msgId=2 - RESULT err=0 tag=105 nentries=0 etime=0
[14/Jan/2008:14:34:35 -0600] conn=121 op=2 msgId=3 - ADD dn="cn=example.edu.getauhoent,cn=example.edu_auho_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config"
[14/Jan/2008:14:34:35 -0600] conn=121 op=2 msgId=3 - RESULT err=0 tag=105 nentries=0 etime=0
[14/Jan/2008:14:34:35 -0600] conn=121 op=3 msgId=4 - UNBIND
[14/Jan/2008:14:34:35 -0600] conn=121 op=3 msgId=-1 - closing from 192.168.1.1:33412 - U1 - Connection closed by unbind client -
[14/Jan/2008:14:34:36 -0600] conn=122 op=-1 msgId=-1 - fd=51 slot=51 LDAP connection from 192.168.1.1:33413 to 192.168.1.1
[14/Jan/2008:14:34:36 -0600] conn=121 op=-1 msgId=-1 - closed.
[14/Jan/2008:14:34:36 -0600] conn=122 op=0 msgId=1 - SRCH base="cn=example.edu.getsoluent,cn=example.edu_solu_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config" scope=0 filter="(objectClass=*)" attrs=ALL
[14/Jan/2008:14:34:36 -0600] conn=122 op=0 msgId=1 - RESULT err=32 tag=101 nentries=0 etime=0
[14/Jan/2008:14:34:36 -0600] conn=122 op=1 msgId=2 - UNBIND
[14/Jan/2008:14:34:36 -0600] conn=122 op=1 msgId=-1 - closing from 192.168.1.1:33413 - U1 - Connection closed by unbind client -
[14/Jan/2008:14:34:36 -0600] conn=123 op=-1 msgId=-1 - fd=54 slot=54 LDAP connection from 192.168.1.1:33414 to 192.168.1.1
[14/Jan/2008:14:34:36 -0600] conn=122 op=-1 msgId=-1 - closed.
[14/Jan/2008:14:34:36 -0600] conn=123 op=0 msgId=1 - BIND dn="cn=Directory Manager" method=128 version=3
[14/Jan/2008:14:34:36 -0600] conn=123 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=directory manager"
[14/Jan/2008:14:34:36 -0600] conn=123 op=1 msgId=2 - ADD dn="cn=example.edu_solu_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config"
[14/Jan/2008:14:34:36 -0600] conn=123 op=1 msgId=2 - RESULT err=32 tag=105 nentries=0 etime=0
[14/Jan/2008:14:34:36 -0600] conn=123 op=2 msgId=3 - UNBIND
[14/Jan/2008:14:34:36 -0600] conn=123 op=2 msgId=-1 - closing from 192.168.1.1:33414 - U1 - Connection closed by unbind client -
[14/Jan/2008:14:34:36 -0600] conn=123 op=1 msgId=2 - RESULT err=0 tag=105 nentries=0 etime=0
[14/Jan/2008:14:34:36 -0600] conn=124 op=-1 msgId=-1 - fd=51 slot=51 LDAP connection from 192.168.1.1:33415 to 192.168.1.1
[14/Jan/2008:14:34:36 -0600] conn=123 op=-1 msgId=-1 - closed.
[14/Jan/2008:14:34:36 -0600] conn=124 op=0 msgId=1 - SRCH base="cn=example.edu.getauduent,cn=example.edu_audu_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config" scope=0 filter="(objectClass=*)" attrs=ALL
[14/Jan/2008:14:34:36 -0600] conn=124 op=0 msgId=1 - RESULT err=32 tag=101 nentries=0 etime=0
[14/Jan/2008:14:34:36 -0600] conn=124 op=1 msgId=2 - UNBIND
[14/Jan/2008:14:34:36 -0600] conn=124 op=1 msgId=-1 - closing from 192.168.1.1:33415 - U1 - Connection closed by unbind client -
[14/Jan/2008:14:34:36 -0600] conn=125 op=-1 msgId=-1 - fd=54 slot=54 LDAP connection from 192.168.1.1:33416 to 192.168.1.1
[14/Jan/2008:14:34:36 -0600] conn=124 op=-1 msgId=-1 - closed.
[14/Jan/2008:14:34:36 -0600] conn=125 op=0 msgId=1 - BIND dn="cn=Directory Manager" method=128 version=3
[14/Jan/2008:14:34:36 -0600] conn=125 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=directory manager"
[14/Jan/2008:14:34:36 -0600] conn=125 op=1 msgId=2 - ADD dn="cn=example.edu_audu_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config"
[14/Jan/2008:14:34:36 -0600] conn=125 op=1 msgId=2 - RESULT err=32 tag=105 nentries=0 etime=0
[14/Jan/2008:14:34:36 -0600] conn=125 op=2 msgId=3 - UNBIND
[14/Jan/2008:14:34:36 -0600] conn=125 op=2 msgId=-1 - closing from 192.168.1.1:33416 - U1 - Connection closed by unbind client -
[14/Jan/2008:14:34:36 -0600] conn=125 op=1 msgId=2 - RESULT err=0 tag=105 nentries=0 etime=0
[14/Jan/2008:14:34:36 -0600] conn=126 op=-1 msgId=-1 - fd=51 slot=51 LDAP connection from 192.168.1.1:33417 to 192.168.1.1
[14/Jan/2008:14:34:36 -0600] conn=125 op=-1 msgId=-1 - closed.
[14/Jan/2008:14:34:36 -0600] conn=126 op=0 msgId=1 - SRCH base="cn=example.edu.getauthent,cn=example.edu_auth_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config" scope=0 filter="(objectClass=*)" attrs=ALL
[14/Jan/2008:14:34:36 -0600] conn=126 op=0 msgId=1 - RESULT err=32 tag=101 nentries=0 etime=0
[14/Jan/2008:14:34:36 -0600] conn=126 op=1 msgId=2 - UNBIND
[14/Jan/2008:14:34:36 -0600] conn=126 op=1 msgId=-1 - closing from 192.168.1.1:33417 - U1 - Connection closed by unbind client -
[14/Jan/2008:14:34:36 -0600] conn=127 op=-1 msgId=-1 - fd=54 slot=54 LDAP connection from 192.168.1.1:33418 to 192.168.1.1
[14/Jan/2008:14:34:36 -0600] conn=126 op=-1 msgId=-1 - closed.
[14/Jan/2008:14:34:36 -0600] conn=127 op=0 msgId=1 - BIND dn="cn=Directory Manager" method=128 version=3
[14/Jan/2008:14:34:36 -0600] conn=127 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=directory manager"
[14/Jan/2008:14:34:36 -0600] conn=127 op=1 msgId=2 - ADD dn="cn=example.edu_auth_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config"
[14/Jan/2008:14:34:36 -0600] conn=127 op=1 msgId=2 - RESULT err=0 tag=105 nentries=0 etime=0
[14/Jan/2008:14:34:36 -0600] conn=127 op=2 msgId=3 - ADD dn="cn=example.edu.getauthent,cn=example.edu_auth_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config"
[14/Jan/2008:14:34:36 -0600] conn=127 op=2 msgId=3 - RESULT err=0 tag=105 nentries=0 etime=0
[14/Jan/2008:14:34:36 -0600] conn=127 op=3 msgId=4 - UNBIND
[14/Jan/2008:14:34:36 -0600] conn=127 op=3 msgId=-1 - closing from 192.168.1.1:33418 - U1 - Connection closed by unbind client -
[14/Jan/2008:14:34:36 -0600] conn=128 op=-1 msgId=-1 - fd=51 slot=51 LDAP connection from 192.168.1.1:33419 to 192.168.1.1
[14/Jan/2008:14:34:36 -0600] conn=127 op=-1 msgId=-1 - closed.
[14/Jan/2008:14:34:36 -0600] conn=128 op=0 msgId=1 - SRCH base="cn=example.edu.getexecent,cn=example.edu_exec_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config" scope=0 filter="(objectClass=*)" attrs=ALL
[14/Jan/2008:14:34:36 -0600] conn=128 op=0 msgId=1 - RESULT err=32 tag=101 nentries=0 etime=0
[14/Jan/2008:14:34:36 -0600] conn=128 op=1 msgId=2 - UNBIND
[14/Jan/2008:14:34:36 -0600] conn=128 op=1 msgId=-1 - closing from 192.168.1.1:33419 - U1 - Connection closed by unbind client -
[14/Jan/2008:14:34:37 -0600] conn=129 op=-1 msgId=-1 - fd=54 slot=54 LDAP connection from 192.168.1.1:33420 to 192.168.1.1
[14/Jan/2008:14:34:37 -0600] conn=128 op=-1 msgId=-1 - closed.
[14/Jan/2008:14:34:37 -0600] conn=129 op=0 msgId=1 - BIND dn="cn=Directory Manager" method=128 version=3
[14/Jan/2008:14:34:37 -0600] conn=129 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=directory manager"
[14/Jan/2008:14:34:37 -0600] conn=129 op=1 msgId=2 - ADD dn="cn=example.edu_exec_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config"
[14/Jan/2008:14:34:37 -0600] conn=129 op=1 msgId=2 - RESULT err=0 tag=105 nentries=0 etime=0
[14/Jan/2008:14:34:37 -0600] conn=129 op=2 msgId=3 - ADD dn="cn=example.edu.getexecent,cn=example.edu_exec_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config"
[14/Jan/2008:14:34:37 -0600] conn=129 op=2 msgId=3 - RESULT err=0 tag=105 nentries=0 etime=0
[14/Jan/2008:14:34:37 -0600] conn=129 op=3 msgId=4 - UNBIND
[14/Jan/2008:14:34:37 -0600] conn=129 op=3 msgId=-1 - closing from 192.168.1.1:33420 - U1 - Connection closed by unbind client -
[14/Jan/2008:14:34:37 -0600] conn=130 op=-1 msgId=-1 - fd=51 slot=51 LDAP connection from 192.168.1.1:33421 to 192.168.1.1
[14/Jan/2008:14:34:37 -0600] conn=129 op=-1 msgId=-1 - closed.
[14/Jan/2008:14:34:37 -0600] conn=130 op=0 msgId=1 - SRCH base="cn=example.edu.getprofent,cn=example.edu_prof_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config" scope=0 filter="(objectClass=*)" attrs=ALL
[14/Jan/2008:14:34:37 -0600] conn=130 op=0 msgId=1 - RESULT err=32 tag=101 nentries=0 etime=0
[14/Jan/2008:14:34:37 -0600] conn=130 op=1 msgId=2 - UNBIND
[14/Jan/2008:14:34:37 -0600] conn=130 op=1 msgId=-1 - closing from 192.168.1.1:33421 - U1 - Connection closed by unbind client -
[14/Jan/2008:14:34:37 -0600] conn=131 op=-1 msgId=-1 - fd=54 slot=54 LDAP connection from 192.168.1.1:33422 to 192.168.1.1
[14/Jan/2008:14:34:37 -0600] conn=130 op=-1 msgId=-1 - closed.
[14/Jan/2008:14:34:37 -0600] conn=131 op=0 msgId=1 - BIND dn="cn=Directory Manager" method=128 version=3
[14/Jan/2008:14:34:37 -0600] conn=131 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=directory manager"
[14/Jan/2008:14:34:37 -0600] conn=131 op=1 msgId=2 - ADD dn="cn=example.edu_prof_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config"
[14/Jan/2008:14:34:37 -0600] conn=131 op=1 msgId=2 - RESULT err=0 tag=105 nentries=0 etime=0
[14/Jan/2008:14:34:37 -0600] conn=131 op=2 msgId=3 - ADD dn="cn=example.edu.getprofent,cn=example.edu_prof_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config"
[14/Jan/2008:14:34:37 -0600] conn=131 op=2 msgId=3 - RESULT err=0 tag=105 nentries=0 etime=0
[14/Jan/2008:14:34:37 -0600] conn=131 op=3 msgId=4 - UNBIND
[14/Jan/2008:14:34:37 -0600] conn=131 op=3 msgId=-1 - closing from 192.168.1.1:33422 - U1 - Connection closed by unbind client -
[14/Jan/2008:14:34:37 -0600] conn=132 op=-1 msgId=-1 - fd=51 slot=51 LDAP connection from 192.168.1.1:33423 to 192.168.1.1
[14/Jan/2008:14:34:37 -0600] conn=131 op=-1 msgId=-1 - closed.
[14/Jan/2008:14:34:37 -0600] conn=132 op=0 msgId=1 - SRCH base="cn=example.edu.getmailent,cn=example.edu_mail_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config" scope=0 filter="(objectClass=*)" attrs=ALL
[14/Jan/2008:14:34:37 -0600] conn=132 op=0 msgId=1 - RESULT err=32 tag=101 nentries=0 etime=0
[14/Jan/2008:14:34:37 -0600] conn=132 op=1 msgId=2 - UNBIND
[14/Jan/2008:14:34:37 -0600] conn=132 op=1 msgId=-1 - closing from 192.168.1.1:33423 - U1 - Connection closed by unbind client -
[14/Jan/2008:14:34:38 -0600] conn=133 op=-1 msgId=-1 - fd=54 slot=54 LDAP connection from 192.168.1.1:33424 to 192.168.1.1
[14/Jan/2008:14:34:38 -0600] conn=132 op=-1 msgId=-1 - closed.
[14/Jan/2008:14:34:38 -0600] conn=133 op=0 msgId=1 - BIND dn="cn=Directory Manager" method=128 version=3
[14/Jan/2008:14:34:38 -0600] conn=133 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=directory manager"
[14/Jan/2008:14:34:38 -0600] conn=133 op=1 msgId=2 - ADD dn="cn=example.edu_mail_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config"
[14/Jan/2008:14:34:38 -0600] conn=133 op=1 msgId=2 - RESULT err=0 tag=105 nentries=0 etime=0
[14/Jan/2008:14:34:38 -0600] conn=133 op=2 msgId=3 - ADD dn="cn=example.edu.getmailent,cn=example.edu_mail_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config"
[14/Jan/2008:14:34:38 -0600] conn=133 op=2 msgId=3 - RESULT err=0 tag=105 nentries=0 etime=0
[14/Jan/2008:14:34:38 -0600] conn=133 op=3 msgId=4 - UNBIND
[14/Jan/2008:14:34:38 -0600] conn=133 op=3 msgId=-1 - closing from 192.168.1.1:33424 - U1 - Connection closed by unbind client -
[14/Jan/2008:14:34:38 -0600] conn=134 op=-1 msgId=-1 - fd=51 slot=51 LDAP connection from 192.168.1.1:33425 to 192.168.1.1
[14/Jan/2008:14:34:38 -0600] conn=133 op=-1 msgId=-1 - closed.
[14/Jan/2008:14:34:38 -0600] conn=134 op=0 msgId=1 - SRCH base="cn=example.edu.getbootent,cn=example.edu__boot_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config" scope=0 filter="(objectClass=*)" attrs=ALL
[14/Jan/2008:14:34:38 -0600] conn=134 op=0 msgId=1 - RESULT err=32 tag=101 nentries=0 etime=0
[14/Jan/2008:14:34:38 -0600] conn=134 op=1 msgId=2 - UNBIND
[14/Jan/2008:14:34:38 -0600] conn=134 op=1 msgId=-1 - closing from 192.168.1.1:33425 - U1 - Connection closed by unbind client -
[14/Jan/2008:14:34:38 -0600] conn=135 op=-1 msgId=-1 - fd=54 slot=54 LDAP connection from 192.168.1.1:33426 to 192.168.1.1
[14/Jan/2008:14:34:38 -0600] conn=134 op=-1 msgId=-1 - closed.
[14/Jan/2008:14:34:38 -0600] conn=135 op=0 msgId=1 - BIND dn="cn=Directory Manager" method=128 version=3
[14/Jan/2008:14:34:38 -0600] conn=135 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=directory manager"
[14/Jan/2008:14:34:38 -0600] conn=135 op=1 msgId=2 - ADD dn="cn=example.edu__boot_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config"
[14/Jan/2008:14:34:38 -0600] conn=135 op=1 msgId=2 - RESULT err=0 tag=105 nentries=0 etime=0
[14/Jan/2008:14:34:38 -0600] conn=135 op=2 msgId=3 - ADD dn="cn=example.edu.getbootent,cn=example.edu__boot_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config"
[14/Jan/2008:14:34:38 -0600] conn=135 op=2 msgId=3 - RESULT err=0 tag=105 nentries=0 etime=0
[14/Jan/2008:14:34:38 -0600] conn=135 op=3 msgId=4 - UNBIND
[14/Jan/2008:14:34:38 -0600] conn=135 op=3 msgId=-1 - closing from 192.168.1.1:33426 - U1 - Connection closed by unbind client -
[14/Jan/2008:14:34:38 -0600] conn=136 op=-1 msgId=-1 - fd=51 slot=51 LDAP connection from 192.168.1.1:33427 to 192.168.1.1
[14/Jan/2008:14:34:38 -0600] conn=135 op=-1 msgId=-1 - closed.
[14/Jan/2008:14:34:38 -0600] conn=136 op=0 msgId=1 - SRCH base="cn=example.edu.getethent,cn=example.edu_ethers_vlv_index,cn=example,cn=ldbm database,cn=plugins,cn=config" scope=0 filter="(objectClass=*)" attrs=ALL
[14/Jan/2008:14:34:38 -0600] conn=136 op=0 msgId=1 - RESULT err=32 tag=101 nentries=0 etime=0
[14/Jan/2008:14:34:38 -0600] conn=136 op=1 msgId=2 - UNBIND
[14/Jan/2008:14:34:38 -0600] conn=136 -
Hi,
I have a problem. currently our system using based on PO document type and net value to trigger release process. now new requirement to use based on account assignment item level so, po doesn't support line level i decided to use CEKKO - USRC1 = KNTTP based on user exit.
When i set-up charecteistics and assign vaues
then class assigned to charecteristics ( existing it self)
When class assignment with release code values.
Now when i create PO release process are not triggered please through me some lite whether config prob or user exit any thing need to done.
Regards
Jaskgoto transaction OMGSCK and check that alll steps are green except the sheckk re release group and releae class step
in this step
Characteristic CEKKO_USRC1 exists (linked with CEKKO-USRC1) = green
You must maintain a customer exit for characteristic CEKKO_USRC1= yellow
if this all looks fine then the master data problems or PO ceration problems -
Batch processing problems-can anyone help?
Setup: Quadcore, 4GB RAM, 4 internal drives all with plenty of space, Leopard OS, latest version.
Software: CS4 with Photoshop Extended; all updates installed. I also have CS3 installed; only use Bridge and PS in both apps.
Problem: Working in CS4. All edits/crops/corrections done in the Camera Raw window; all edits saved and viewable in Bridge. However, when I use Batch from the Tools dropdown (Tools > Photoshop > Batch), and check all the usual places, select an Action, select a Destination, and hit "Go", the results are totally weird. Some images process as expected, but many are at least two stops overexposed.
All individual files will Open, and can be Saved As manually; all works fine. That is in fact how my assistant and I got the job done tonight. The Batch Action is simplicity itself: Open, Save As (JPEG level 9), and Close file—but if I run Batch on the same files that can be opened and Saved As perfectly, it all goes crazy; three quarters of the files are totally overexposed, in blocks (10–25, roughly), and at random.
I have used the Ctrl + Alt + Shift after opening Bridge; I have run Cocktail; and lit the right incense. But this still will not work properly! Can anyone help???Batching the same files in CS3 works perfectly, in terms of the processed JPEGs at least being correctly exposed, but the CS4-only edits (like the healing brush) are not recognised, nor are many, tho' not all, of the crops.
I have decided to deactivate and uninstall, then reinstall CS4, after upgrading to Snow Leopard. Usually, I wait for a few months for others to report on OS update interactions with CS and FCP, but since CS4 as installed was useless and I had done the usual resets of Preferences without any change to Batch Processing's reliability, I felt I could not be worse off.
So, after upgrading to Snow Leopard, I will reinstall CS4 (and all apps this time, rather than just PS and Bridge, as I usually do) in case there are soime weird unintended consequences of a Custom install.
Very frustrating and time-consuming, and I wonder what I might have done to create this problem—seeing as no one commented, I can only assume that this is an unique experience.
I will report back today, hopefully. -
Refurbishment processing - problem while installing the equipment.
Dear Experts,
I am testing the refurbishment cycle, while doing this I am facing a problem.
Process is as below:
The equipment is damaged and needed replacement.
I have created the material master and serial number.
I have changed the valuation type of the damaged equipment to C3 using tcode IQ02 and dismantled the equipment using IE4N.
After saving the above transaction I got notification, material document number for GR of the damaged equipment into warehouse under the valuation type C3.
Now I am trying to install the equipment in replacement of the damaged equipment.
I have created the reservation with movement type 201 and with reference to the reservation installing the equipment using IE4N with GI.
I have entered the following data in IE4N installation:
Material number,serial number which is under valuation type C1.
Reservation number and line item number
Top Functional location.
While saving this transaction I am getting the following messages in application log:
1. This is warning message
Configuration- and validation check not possible
Message no. CCMM049
Diagnosis
For a local configuration check the configuration and effectivity data of the top reference equipment (counterpart of access node in the allowed configuration) is considered. However, the system cannot find a reference equipment for the assembly to be installed.
System Response
Configuration and effectivty data cannot be taken into account.
2. This is Error message:
No function identifier maintained. Configuration check not possible
Message no. CCMM043
I am not able to proceed further.
I could not find an appropriate note also in OSS.
If I am performing both the transactions separately i.e., Goods Issue against the reservation and changing the Functional Location in the Equipment master of the serial number, then it is happening correctly.
But I want this to happen like Dismantle because both the transactions can be posted at the same time.
Please help me out in solving this error.
Thanks and Regards,
Praveen.Hi thyagi,
thanks for your reply.
I have done the chages in OMPL1 earlier, and run the transaction successfully.
For analysing this problem I went to transaction CCM2, there in the Equipment GAP there is filed FID. This field is empty.
Here if I am maintaing anything like the equipment number or functional location. The if I run the transaction IE4N there a new error message is coming as below:
1. This is Error message
FID deviates from FID FCLT-UTY of previously installed object
Message no. CCMM038
2. This is Warning message:
Function identifier FCLT-UTY of Structure Gap will be used for configuration check
Message no. CCMM037
3. This is Warning message:
Configuration- and validation check not possible
But I want to understand this. Why it is behaving like this and more over I dont have iPPE inteface also.
If I change the message type will there be any problem?
Please clarify.
Regards,
Praveen. -
Hi,
I have built a mapping for loading a dimension. Unfortunately, after starting it , it just fails with the following error :
ORA-00904: "INGRP1"."SERVICE_INVARIANT" : identificateur non valide
ORA-02063: précédant line de DIIAV3@EMP_IIA_DATA
I have looked each operator in my mapping, i don't have such group "INGRP1" nor any field "SERVICE_INVARIANT". This last field appears only in the table created "autobinding"-ly from the dimension.
I have tried to synchronize the dimension operator , drop the mapping and re-deploy it : no success.
What did i miss ?
StephanStephan
I think I posted the same problem as you have here a few hours prior to you. We have narrowed the problem down to the SQL select statement generated by the mapping failing and giving a meanless error. Possibly a 10g database bug. What is painful is the fact the the mapping is running quite happily in our production system and has only failed in our DEV/TEST since upgrading OWB from 10.2.0.1 to 10.2.0.3.
I assume you have a TYPE2 SCD that is in your target schema and that your target schema is in a different database instance of that to which your Control Centre is registered. i.e the PL-SQL is running from the DB in which your control centre is registered and is referencing a table via a DB Link.
I have proved that I can make the mapping work when the physical table the dimension creates is in the same database instance as my control centre.
In light of the above we have raised a TAR with Oracle with example scripts that demonstrate the DB error.
I hope this is useful.
Regards
Tim -
HI Group,
I am facing problem in XI while processing 48 MB File through File adapter,I have used Content Conversion in the design.
I am using normal 64Bit operating system with Max of 2GB heap size,still I am facing the problem,Can any body tell me how much Heap size I required to process 48 MB size file through XI?Hi,
Refer following SAP note-for this go to www.service.sap.com/notes
File adapter faq- 821267
Java Heap - 862405
for java settings- 722787
This blog may give some insight-/people/sap.user72/blog/2004/11/28/how-robust-is-sap-exchange-infrastructure-xi
/people/sravya.talanki2/blog/2005/11/29/night-mare-processing-huge-files-in-sap-xi
btw, if the error tells that, trailer is missing.. where are you getting this error ?
Regards,
Moorthy -
Integration Process problem in Message Split.
Hi all,
I have done message split using the this blog.
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
I am getting problem in the BPM i.e. in Integration Process. In the message monitoring of RWB I am able to see data Outbound to BPM exchange but BPM to Inbound is not at all happening.
I dont have any SAP tools to trace the BPM.
I have been trying this for 3 days desparately.
Can somebody please help me in this.
Thanks,
Subhosh.Hi,
Like mentioned by Udo, you need to have the SAP log on to be able to debug and find the cause for your problem.
One option, can you look into message monitoring in RWB and check what the error message is?
Regards,
Bhavesh
Maybe you are looking for
-
What are the keyboard shortcuts to display on external monitor
Hi how can i get my laptop to export the image to an external monitor? I have a MB Pro, and have tried DVI to HDMI direct cable, the supplied DVI-D cable connected to VGA cable and no luck. the screen on my laptop is flickering and I want to use the
-
I am trying to call a web service using the JPublisher generated pl/sql functions. The function works fine when there is no exception from the web service. However when the web service raises an exception (required by the business logic) I am receivi
-
Playing music from external hard drive, iTunes
Hello all, After years of wanting to own a MacBook Pro, I finally have one. This is the first Mac computer that I have owned so I am still new to everything. One issue that I am having is an issue that I have had over the years on Windows, that al
-
Partner determination procedure assignment not possible
Hi All, 1) I had created the partner determination procedure 2) Created partner function in procedure But while doing partner detremination procedure assignment i am unable to that and not able to create the new group customer account group, while do
-
Adobe flash plugin status or update problem
Plugin check says Adobe Flash PlayerRealNetworks(tm) RealDownloader PepperFlashVideoShim Plug-In 1.3.0.208 vulnerable but when I click on the update, I am offered install_flashplayer 17x32_mssa_aaa_aih.exe as a installer. When I run it McAfee securit