Dimensions in inches do not match in PS CS5 and Bridge CS5

Comparing the dimensions in inches between Mac Photoshop CS5 and Bridge CS5 show errors in Bridge's calculations.
Example: PS shows in image size 30 x 16.891 inches. Bridge shows in Essentials that the file is 30.1 x 17.
Is there a way to resolve the difference?
Seems that the dimensions of the file would be exact in the Metadata Panel of Bridge, but it shows the same dimensions of the Essentials data below the preview.
Barry Rudick
Aker Imaging

Well, I'm not necessarily suggesting it as a permanent solution, just a workable fix to get up and working again. Which is what I've always done - anything's better than those useless junk profiles that these manufacturers keep pushing down unsuspecting users' throats.
But it's true, some calibrators really are "silly devices" and in some cases you really are better off using sRGB. I've accumulated about 8 or 10 different calibrators over the years but if you ask me now I only trust two of them. Both especially and exclusively made for the displays they're used on.
Still, it never hurts to get into good habits early on. Your knowledge improves, your equipment improves, and you move on. The early takeaway for me was that it helped me understand what color management is and what it does - and where it does it. Pretty basic stuff, but nevertheless an important leap in understanding. A small step for a man and all that...

Similar Messages

  • Photoshop and Bridge CS5 does not auto rotate SOME images.

    Photoshop and Bridge CS5 does not rotate SOME of my vertical images.  Most other photos taken in the same time frame and with the same camera display perfectly.
    Orientation is checked for display under Preferences, Metadata, Camera Data. 
    There also seems to be a discrepancy how Orientation is described under Metadata for those images which DO auto rotate : sometimes it is -90 (which is how I hold the camera for verticals and which displays on most verticals) and sometimes it is "normal" even when it has auto rotated the image.   I do not understand this difference.
    "Normal" is also used to describe the orientation of those images which DO NOT auto rotate for viewing.
    The photos in questions were taken using a Nikon D-300 which is programmed to indicate the orientation of the camera and has always been programmed to do so. 
    I know I can manually change the orientation but we are talking about hundreds of images (I have over 10,000 photos in all; most of which display fine).
    What should I be looking for to explain and correct this issue?
    I appreciate anything you can do to help.  Thank you.

    Thanks for responding to my query.  I'll check out the thumbnail size.
    It is just so curious that 90% of the verticals auto rotate and the rest do not.  The ones that do not rotate are even from different years (other images in those years work fine), although all taken with the same camera.

  • After effects cs5 and photoshop cs5 not working

    Hello!
    I have a problem with AE cs5 and photoshop cs5 i download the trial version of the master collection and i install some of the program  all work fine but AE and photoshop, the problem is when i try to open AE it load perfect but when the interface is out it give me this error
    and i have nothing more open or anything just the AE so that with AE>
    And photoshop the problem is that when i try to open the photoshop 64 bit it starts to load the program but it crashes, it give no error or anything but the 32 bit version works fine, please help.
    im using a windows 7 64 bit, 4 gbs ram, and 1 gb video nvidia Geforge GT 240M
    juan acosta

    Update/ adjust your graphics card driver. Both crashes seem pretty clearly related to issues with graphics acceleration not working as required by both programs.
    Mylenium

  • Metadata - File Properties - Dimensions (in inches) Doesn't Match PS

    This has been troubling me for some time now. The info in
    CS4 Bridge Metadata/File Properties/Dimensions (in inches
    ) never matches what I see in Photoshop CS4. The pixel dimension in Bride is right but not in inches.
    I'm talking about plain jane .jpg's and .png's in particular. For instance, a png file that has:
    Dimensions: 2100x1500
    In Inches: 8.8x6.3
    in Bridge
    but in PS the inches on the rulers is a perfect 7x5.
    This proportion of difference is the same from file to file. The larger the picture/image is, the more difference there is from Bridge to PS.
    What gives? Why can't Bridge get the inches correct?

    Thanks for the comeback CurlyY. The image is really a 7x
    5. Divide out the pixel dimension by 300 (dpi)
    and it is 7x5. This is not an image taken by a camera. It is a public domain template for PS.
    If I look at this info from an image I took with my Nikon D700, everything matches up.
    I only find this difference with 3rd party art work.
    I have goobs of .png's and .psd's I've collected over the years and I plan to use Bridge's Output workspace to create printouts so I can find templates I want for whatever reason (seniors, families,...). I plan to put the inch dimension into the filename but the inch dimension in Bridge is incorrect, and I don't want to have to load hundreds of templates into PS to get this info.

  • Album art not matching correctly between iTunes and iPhone.

    So as much as this might not seem as an issue for some, I notice that my album artwork in iTunes does not always match up with the album art on my phone. If I think that some artwork for a song or album is unappealing or not matching, I will change it to my own artwork. Normally, this has never been an issue for me until recently. What happens is I do the normal album art changing procedure (go to get info, add/delete album art) and it works fine. The odd thing is that when I go to select an album on my phone, the album art is the same as what it was in the iTunes Store and not what I added, but the individual songs have the album art that I added myself.
    I've managed to fix this issue on some albums by converting them mp3 format, but that only works for some and I don't know why. I would prefer the song art and album art be the same, just because I'm really nitpicky about things matching. Am I missing a step or doing something wrong? Does anyone else happen to have this issue, or any clue what the problem might be? Help would be much appreciated, thanks!

    What you are trying to do is clear but iTunes Match / IOS 6 does not work that way.
    You can sync playlists from computer to iDevice using the options under the music tab for your iDevice on the computer.  This will provide a local copy on the iDevice of each Song included in each Playlist selected for sync.
    With iTunes Match / IOS 6, as Songs are played from the iCloud (ie not those already downloaded in playlists) IOS 6 does in fact 'download' the Song to a local cache.  In theory this cache should be managed by IOS 6 such that it does not overload your iDevice memory - Apple have not chosen to share exactly how this operates.
    Given your notes above would suggest starting from a refresh restore on the iPhone 5 with all synchronisation performed afresh and iTunes Match switched on.

  • Itunes charged me multiple times for the same purchase. A message kept appearing that the bank records did not match my account information and each time charged me 5.16... it shows up on my bank account as a pre-authorized purchase 9 times.

    I made a purchase of about 3 songs for the price of 5.16. Well when I was trying to download the songs a message kept appearing saying that "the account inforamtion does not match my bank records". Looking at my bank account 3 days later it shows up under my accout as pre-authorized charges 9 times. The post dates of these charges are not all today and these charges are pending transactions.
    Why did they charge me nine times for the same purchase? And why is it charged for tomorrow?

    This happend to me to---kept getting msg that info did not match bank records and I tried a few times then gave up THEN checked bank account and they charged me SIX TIMES
    of course, you cannot even call them or email...its frustrating..I reported a problem under the songs bought but I have spent over half an hour on this trying to call etc....this is nuts

  • TOTAL NOT MATCH SAME AS AGREEMENT AND INVOICE SUMMARY TOTAL AMOUNT

    HI ,
    my problem is,i have one project and one agreement against this project and i book invoice and credit memo and retention invoice
    In invoice summary total is 20.55 and agreement --> Invoice amount 22.oo so total is not match
    give me guidance to this is correct way invoice summary total amount and agreement --> invoice amount both are require same ?

    Hi
    On Invoice Summary form, the column Invoice Amount, shows the amount in Invoice Currency, and including taxes. Taxes are included for released invoices, which were interfaced to AR.
    In the Agreement form, the invoiced amount does not include taxes.
    Dina

  • Final payment register does not match with Preliminary register and does

    Final payment register -does not match with Preliminary payment reigster- it should have invoice number and PO Number whereas Preliminary payment register has INvoice but does not have a PO number .Cheques issue they would like to see -against which system generated PO only

    Please see these docs/links.
    R12: What replaces the 11i Preliminary Payment Register? [ID 750109.1]
    What Happened To The Preliminary And Final Payment Register In R12? [ID 746339.1]
    EBS File Comparison Report Now Available
    https://blogs.oracle.com/stevenChan/entry/ebs_file_comparison_report_now
    Thanks,
    Hussein

  • My iPod touch keeps saying my zip code does not match my bank information and wont let me buy a song

    My iPod Touch recently started saying that my zip code did not match my bank information, therefore I can't buy anymore songs. I haven't had any problems buying songs in the past and haven't changed any of the settings or information on my iPod.  Does anyone know how to fix this?!?

    Use another payment method
    Contact iTunes and try to resolve the problem
    Apple - Support - iTunes - Contact Us

  • When syncing the calender in outlook do not match with G4 iPhone and are about 6 hrs out

    when I sync with the g4 iPhone the times do not matcha and are always around 6hrs out

    .

  • 60D images not showing a thumbnail view in Bridge CS5..ideas?

    I am having trouble seeing images in raw format from a 60D Canon in Bridge CS5. I have an iMac using OS X 10.9.4..any ideas why I can only see the white file, but can see all images in raw from 5D, 7D, 40D...etc. No updates show up as available on my computer or on the Adobe site. I just can't figure it out!
    Thanks for your help.
    -Alli

    Make sure your ACR (Adobe camera Raw) plug-in is fully updated.  That camera model has been supported since Adobe Camera Raw 6.2.
    DO NOT rely on the Adobe auto updater to tell you that there are no updates available.  It's totally unreliable in CS5 and earlier versions.  The Adobe updater team overseas did not get their act together even halfway right until CS6.
    Go into the About Plugin > Camera Raw… menu item in Photoshop to see what version of ACR you have.  In CS5, ACR should be at version 6.7, more precisely at 6.7.1.
    If you are already updated to ACR 6.2 or higher, then go to the Tools menu in Bridge and Purge Cache for the offending folder(s).

  • PS CS5 and Bridge not showing correct colors

    When I open up pictures in Photoshop CS5 and view them in Bridge, I see a really washed out color and the pictures look horrible. However, when bring them up in Pictureviewer or another application I see the correct colors. In PS the mode is set to RGB color like normal. Please help!

    Well, I'm not necessarily suggesting it as a permanent solution, just a workable fix to get up and working again. Which is what I've always done - anything's better than those useless junk profiles that these manufacturers keep pushing down unsuspecting users' throats.
    But it's true, some calibrators really are "silly devices" and in some cases you really are better off using sRGB. I've accumulated about 8 or 10 different calibrators over the years but if you ask me now I only trust two of them. Both especially and exclusively made for the displays they're used on.
    Still, it never hurts to get into good habits early on. Your knowledge improves, your equipment improves, and you move on. The early takeaway for me was that it helped me understand what color management is and what it does - and where it does it. Pretty basic stuff, but nevertheless an important leap in understanding. A small step for a man and all that...

  • Balance not matching as per FBL5n and FS10N

    When we run the customer balance report FBL5n as on 09/29/2007  on week end it shown a balance ( open item for all customer and recon account  123456 )  of  say 10 M. The same amount we got thru FS10N  we ran on with GL  123456  i.e. 10M. But when we ran the report FBL5n  today ( with same parameter 9/29/07 and recon account 123456,  open items ) we are getting a balance of 13M but our GL balance is still 10M on 9/29/07. Here is my question why the balance has changed  for FBL5N when I am running the report on past date ? I feel it should not. But say there is difference in these two reports, how to reconcile ?
    My problem is I took the balance from FS10N and now I want details of that balance ( customer wise balance )  as on 9/29 . This should match and I need it for auditor .Kindly help me gurus.
    Thanks
    Satya

    Satya,
    The possible diffrence between   FBL5N reports run on first time and second time might be.
    There may be invoices posted to that Customer Accounts with past Posting Date after you took first Report.
    To find out which invoice are posted after you run the report , run FBL5N again with the same parameters and select Entry Date column from the layout and sort it out. If you find some invoices where the Entry Date is past the Date you ran the first Report then these are the invoices which are contributing the diffrences.
    Generally this will happen when Sales/Billing documents are released later to Accounting.
    Thanks
    Sivaram

  • Scalability Test: parallel requests not matching between app server and db.

    We have an environment where we have started doing some load testing on our weblogic 11g instance.
    The current flow and configuration is the following:
    There are https requests that go into a servlet, which then calls a local EJB which uses a connection pool to request data that is returned to the caller.
    The following diagram shows the general flow w/ pool size limits:
    (Socket Readers: 33%) --> Servlet --> Local EJB (initial 100, max 200) --> Connection pool (initial 400, max 400) --> Oracle RAC database
    First thing worth pointing out is I know that the connection pool size is drastically larger than the ejb pool -- and this needs to be addressed.
    During a scalability test, we saw that there were the following max stats on the system:
    Max number of sockets to the app server was approximately 450, while the maximum number of connections used during the test was 122.
    We did not have instrumentation on the ejb pool to see how much it grew, but I'm assuming that the limit was due to the pool being to small and not growing fast enough.
    what are people's thoughts on what to measure and test. We are trying to get a baseline configuration before jumping to a cluster environment.
    Is there recommendations in terms of industry standards for matching the socket readers, thread pool, ejb pool and connection pool for a system? General recommendation read so far indicate that inital and max should be set to the same values?
    Any recommend literature is appreciated.
    Thank you.

    Another measurement point that was captured is the max number of threads (LWPs) on the server went up to 196 (then dropped to 179 and stabalized there)
    Any help is definitely appreciated.

  • Audio Not Matching Up after Log and Capture

    After I log and capture my film on my computer a message puts up and says something like your audio is not aligned with your film you may want to fix the audio. The audio is way off from what I was filming. I tried 3 different Mini DVs and all had the same results. The good thing was I was just trying to make a sort of pump up video for a friend for colleges to look at so it wasn't that vital for most of the film. But when I needed the part where she was speaking about her stats and everything I had to relign the audio to match the movement of her mouth. Did I accidentally change a setting when importing film onto my computer?

    hello
    You might have captured the media with a different audio sample rate to how it was recorded in the camera. The default, standard audio rate in FCP is 48kHz, so the tape might have been recorded at 32kHz, or alternatively, it might have been recorded at 48kHz but you might have you project set up at 32kHz...
    Your capture/project settings should match the media.
    You can check the audio rates by looking in the browser window... scroll accross to the column that reads Aud Rate... what does it say?
    Then check your sequence by clicking on the timeline and pressing command(apple)+0... this will bring up the sequence settings window... look at the Audio Settings... wgat does it say there?
    J.

Maybe you are looking for