Dimensions of the 160-Pin Cable for the NI PXI-2530B

Hello,
My mechanical design team wants to know the measurements of the 160-Pin Cable for the NI PXI-2530B. It will be a while before we receive the cable we ordered. I could not find a data sheet with the measurement details; are they? Alternatively, is Figure 1 in the Installation Instructions drawn to scale?: http://www.ni.com/pdf/manuals/375656b.pdf
Thanks!
Solved!
Go to Solution.

JKSH wrote:
Hello,
My mechanical design team wants to know the measurements of the 160-Pin Cable for the NI PXI-2530B. It will be a while before we receive the cable we ordered. I could not find a data sheet with the measurement details; are they? Alternatively, is Figure 1 in the Installation Instructions drawn to scale?: http://www.ni.com/pdf/manuals/375656b.pdf
Thanks!
What dimensions are you looking for?
I'm a little surprised that the length of the cables is not included in the datasheets (I did just look!) - I thought that when I ordered cables for the older-style PXI-2530 modules in my lab that the length was specified in the part description.
If you need the dimensions of the connectors, you can do a little reverse-engineering and identify the dimensions of the various components. The connector to the module is an LFH-160. The Digikey P/N for the body of a connector is WM4099-ND. It may be difficult to find the dimensions of the backshells, however. The 4 terminal block connectors are standard 50-pin D-Subs. There are many examples out whose dimensions you can review.
Jeff
Jeffrey Zola

Similar Messages

What is the best charging cable for the iPad Air (that is not made by Apple)? I need a long cable (over 6ft or more). I also need the cable to be of high quality and the cord part of the cable to be made of strong material.

What is the best charging cable for the iPad Air (that is not made by Apple)? I need a long cable (over 6ft or more). I also need the cable to be of high quality and the cord part of the cable to be made of strong material. Apple does not make one this long. Is there a cable out there that is sturdy like this and is safe to use?

yes, but I'm trying to use my iPad to type notes (using pages) and I have the smart case which I use as a stand. I need a cable long enough to fit through the back of my desk and the charging brick for the iPad won't fit behind the desk. I have to put it on the floor and then the apple cables aren't long enough to reach.

I am having trouble with the initial connection. I have isolated the problem to the cable/ connection. My new hdmi cable has a resolution up to 1080p...does the resolution matter?is this the right hdmi cable for the apple tv?

I am having trouble with the initial connection of the apple tv. I have isolated the problem to the cable/connection. My new hdmi cable has a resolution up to 1080p...does the resolution matter?is this the right hdmi cable for the apple tv?

There are only two types of HDMI cables (standard and high speed - listen to all 1.2, 1.3 etc etc nonsense they will try to tell in the store) both types will work with the Apple TV.
The cable may be faulty though, have you got another to try, what exactly is happening.

What are the audio connections/cable for the Express?

I'm thinking about getting an Airport Express to hook up to my stereo. What kind of cabling is required and are there cable alternatives (mini to phone, mini to RCA, to optical, etc.)? Thanks.

Depending on your stereo system, you will need different types of wires, if your stereo has an AUX input (Auxiliary) (Like the red and white plugins on TVs) You will need a Y Audio Cable, which basically has the headphone jack at one end, and the Red and White jacks at the other so all you will have to do is plug the headphone end into your airport express and plug the red/white into your Stereo. If your stereo doesn't have the AUX input, simple figure out what type of input it has and google or search an electric store for a cord that will work just right for you.

Need the AD Link cable for SB X-Fi and other models. Anyone have an unneeded one?

Need the AD Link cable for SB X-Fi and other models. Creative is out of stock & discontinued. Anyone have an unneeded one? TIA.

This will do it perfectly. http://www.cableyourworld.com/prodde...?prod=CYW-1755
I once swapped such a cable with the one supplied by Creative because I needed a few extra inches of length. Therefore my recommendation is no gamble, it is a certainty. The only reason I would anticipate failure is if the PIN 1 matching is not performed on both the sound card and I/O bay. I have also seen people turn the cable upside down as well.

Diagram showing the connector pin assignments for a TBX-68 terminal block

Could someone provide me with a diagram showing the connector pin assignments for a TBX-68 terminal block? The terminal block is connected to a PCI-6204E board.
Thank you for your time
Andrew Lockyer

Since pins 1 through 68 are clearly marked on the terminals, I'm guessing that what you really want is the pin out of your DAQ board. That information should be in the manual that came with the board. I could find no reference to a 6204 board on NI's site so I can't point you to an electronic version that you can download. Double check the model number of your board. Once you locate the manual and the pin out of the 68 pin connector on your board, then everything else is simple. Assuming you have a 68 pin ribbon cable connected between the board and the terminal block, then pin 1 on the board is pin 1 on the terminal block, etc.

Need the SCSI-II 100-pin connector for the PXI-6624

Hi. I need to build a custom cable for the NI PXI-6624 and I would like to know where can I get the 100-pin connectors. Thank you.
Daniel
Chile

You should be able to find the connectors here:
Subminiature and Microminiature D Connectors .050 Series Cable Connectors (SCSI)AMP (749111-8)
The parts are made by Tyco Electronics P/N: 749111-8
Otis
Training and Certification
Product Support Engineer
National Instruments

I am moving to the uk from oz and was wondering do i have to replace the whole power cable for my mac book 15inch pro....or can i just replace the actual plug in the wall part ..if i can what is this called as when i look on line it just comes up with the

i am moving to the uk from oz and was wondering do i have to replace the whole power cable for my mac book 15inch pro....or can i just replace the actual plug in the wall part ..if i can what is this called as when i look on line it just comes up with the complete power unit...it seems odd that you have to buy the whole unit again...thanks.matthew

All you need is a plug adaptor, if required. Apple sells an adapter kit:
http://store.apple.com/us/product/MB974ZM/B?fnode=MTY1NDEwMQ&mco=MTA4NDE3MDQ

I would like to replace the hard drive cable for a 13" mid 2010 macbook pro. What is the right model of the hard drive cable?

i would like to replace the hard drive cable for a 13" mid 2010 macbook pro. What is the right model of the hard drive cable?

https://www.ifixit.com/Store/Parts/MacBook-Pro-13-Inch-Unibody-Model-A1278-Mid-2 009-Mid-2010-Hard-Drive-Cable/IF163-013-1
Apple Part #: 922-9062, 821-0814-A

Can you use the same charging cable for both an iPhone and an IPad or are they different? When I use the charging cable for my iPhone on my Ipad, it doesn't charge.

Can you use the same charging cable for both an iPhone and an IPad or are they different? When I use the charging cable for my iPhone on my Ipad, it doesn't charge.

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
 Cheers, Tom

Why is the cable for the shuffle so short

why is the cable for the shuffle so short<should there be 2 cables.I have to havemy ipod dangling from the side of my computer(i have an all in one)

Assuming you have a 4th gen shuffle, it should be fine hanging off the computer, since the shuffle is so light. You can think of that cable that comes with the 4th gen shuffle as being more of an "adapter."
If you want a long cable, you can buy the replacement part. It comes with both a short adapter (like the one you have) and a long cable.
http://store.apple.com/us/product/MC003ZM/A/apple-ipod-shuffle-usb-cable
I use a USB hub, which I can conveniently locate on my desk. I connect the shuffle (and my other iPod/iPhone) to the hub. If you want a hub, make sure you get one that is self-powered (it has it's own power supply).

'The cable for the PCI Ethernet is not plugged in' error

Hi everyone, I've installed a PCI network card for my G5, 1.8 (later model) single processor, and checked to make sure the card has the Realtek chips.
I've tried the D-Link DGE-528T which is meant to be OSX compatible but to no avail. I get the 'The cable for the PCI Ethernet is not plugged in' message. I've then tried the Pluscom with Realtek 8169 chip and again, get the same message.
I have a good understanding of networking, have installed several drivers, sometimes manually and I've used the terminal to recode the permissions. I've also removed the extension cache file but still no luck. I've also made sure to follow each install path from the package file and remove any older drivers. I've also installed the card in slot 1.
I don't think it is the card. Does anyone have any other ideas I could try?

Where did you get the drivers?
I've heard of people using D-Link routers, and even D-Link's USB/Wireless adapter, but I've never encountered anyone using a D-Link PCI ethernet card. A quick search didn't find any drivers and without that you're not going to get very far. I'm mildly impressed that the OS recognizes the card at all.

Do the cables for the 700p work with the 700wx?

I used to have a treo 700p that I broke when I dropped it from a 2nd story balcony onto concrete. I still have the box and whatever cables came with it. Now, I'm able to buy a 700wx for a real low price, but the seller only has the phone and the charger for it, no other cables. Would the cables for my 700p, like the sync cable work with the 700wx? If they would, this would work out real nice!
Post relates to: Treo 700p (Sprint)

Yes it will work most of the cables for the Treo series will work as it is an interchangeable cable, there is some exceptions, but in your case it will work.

Can I use the same USB cable for both the iPhone and the iPad?

Brnad new user of the iPad - can I use the same USB cable for both the iPhone and the iPad? The iPad does not charge when plugged into the computer or the wall (110V) adapter. I've been able to sync in iTunes using the same cable on both.

Actually, the iPad charger works just fine with iPhones and iPods. The iPod/iPhone charger will charge an iPad very slowly but no harm will be done.

Are the usb cables for the iPad 2 and iPhone 4s interchangeable?

Can I use my usb cable provided by my ipad 2 to connect my iPhone 4s to my iMac or vice versa. I noticed the usb cable for the iPad 2 is slightly thicker. Doesn't it mean it's better or faster in terms of transmission of data? Thank you.

Identical cables.
Stedman

Dimensions of the 160-Pin Cable for the NI PXI-2530B

Similar Messages

Maybe you are looking for