Dimensions of the I-Trigue 3200 subwoofer unit?

Please can someone tell me the dimensions of the I-Trigue 3200 subwoofer unit.

Big_Nige,
The dimension for the subwoofer is about (L)22.3cm, (W)23.2cm and (H)22.cm.
Jason

Similar Messages

  • Anyone got or experienced the I-Trigue 3200 2.1? or maybe anyone will know heh

    I was lookin at this to buy and was asking is this sytem LOUD? i mean good and loud like can u hear it outside your house with the door shut and windows of your house? I have the SB 2 ZS card.
    Message Edited by toomuch on 01-08-2005 12:44 AM

    I have these as well they are great as cat says they are not real
    load but they are worth the money... recently purchased a new
    speaker system but the CL system is hooked up to my portable
    DVD player. The sattelite speakers are great for someone
    looking for speakers that will fit in a small area.
    Definantly a great purchase!!
    Jen

  • How do I change DPI in Photoshop CC without changing the pixel dimension of the file?

    I used to be able to do this in Photoshop CS6 by simply clicking the check boxes in the "image size" dialog box:
    scale styles
    constrain proportions
    resample image
    (all boxes UNCHECKED)
    Then input the dpi (usually converting a 300dpi print file to 72dpi for web). And the pixel dimension will stay the same.
    In CC the only option I see is "scale styles" which does not apply to the pixel dimension of the file.
    Please help. I would hate to have to do this function in CS6 all the time.
    CS6:
    CC:

    Just uncheck the [ ] Resample checkbox, then change your Resolution.
    Change the units from Percent to Pixels if you want to see pixel dimensions.
    Once you've successfully run it through (after OK), note that it will remember your units settings the next time you use it.
    -Noel

  • Can an action set the dimension of the crop and put in the center of the image?

    Hi
    running cs6 64bit under w7 64bit
    can an action set the dimensions of the crop height & length and put the crop in the center of the image?
    or should i need a script?
    i mean for example i taken many photos about 20mp mega pixel
    i would like to run a script or an action that set the height & length and set the crop in the center of the image
    thanks

    mantralightroom wrote:
    i have cs6 but i haven't in the action option conditional actions
    ps i tried to record a script to set the histogram channel RGB or Luminocity , but the script plugin doesn't record it and even the action can do it
    you know cs6 starts with histogram in colors mode
    I have a hard time with English even though it may native language.  I'm having some problem with what you wrote.
    Yes cs6 does not have what Adobe calls conditional actions they put into CC.  That feature more or less an IF statement condition on some document attributes.  Like if document width is greater then document height play action landscape else play action portrait.   With CS6 you need to write one line script to use in actions.  Most of the utility scripts I wrote for use in actions are more complex then a simple if statement.
    The way you record scripts is PS is be using Adobe Scriptlistener Plug-in when installed the plug-in records everything you do that can be recorded into two log files one in JavaScript and the other in VBS.  The code generated  works by passing parameters to Adobe Photoshop's Action Manager.  To make scripts toy need to extract the steps you need from one of the log files.    However some thing you can do in Photoshop can not be recorded. And while your right that the scriptlistener plug-in  does not record anything for setting the histograms to RGB channel or Luminosity  channel your wrong when you write the Action Recorder can do it.
    However scripts can get the histograms channel data. I have never process a histogram in a script however there is a sample Photoshop Histogram in the Photoshop javascripting guide. That creates a text graph log.
    // Function to activate all the channels according to the documents mode
    // Takes a document reference for input
    function TurnOnDocumentHistogramChannels(inDocument) {
        // see how many channels we need to activate
        var visibleChannelCount = 0
        // based on the mode of the document
        switch (inDocument.mode) {
            case DocumentMode.BITMAP:
            case DocumentMode.GRAYSCALE:
            case DocumentMode.INDEXEDCOLOR:
                visibleChannelCount = 1
                break;     
            case DocumentMode.DUOTONE:
                visibleChannelCount = 2
                break;
            case DocumentMode.RGB:
            case DocumentMode.LAB:
                visibleChannelCount = 3
                break;
            case DocumentMode.CMYK:
                visibleChannelCount = 4
                break;
            case DocumentMode.MULTICHANNEL:
            default:
                visibleChannelCount = inDocument.channels.length + 1
                break;
        // now get the channels to activate into a local array
        var aChannelArray = new Array()
        // index for the active channels array
        var aChannelIndex = 0
        for(var channelIndex = 0; channelIndex < inDocument.channels.length;channelIndex++) {
            if (channelIndex < visibleChannelCount) { aChannelArray[aChannelIndex++] = inDocument.channels[channelIndex] }
        // now activate them
        inDocument.activeChannels = aChannelArray
    // Save the current preferences
    var startRulerUnits = app.preferences.rulerUnits
    var startTypeUnits = app.preferences.typeUnits
    var startDisplayDialogs = app.displayDialogs
    // Set Adobe Photoshop CC to use pixels and display no dialogs
    app.preferences.rulerUnits = Units.PIXELS
    app.preferences.typeUnits = TypeUnits.PIXELS
    app.displayDialogs = DialogModes.NO
    // if there are no documents open then try to open a sample file
    if (app.documents.length == 0) { open(File(app.path + "/Samples/Fish.psd")) }
    // get a reference to the working document
    var docRef = app.activeDocument
    // create the output file
    // first figure out which kind of line feeds we need
    if ($.os.search(/windows/i) != -1) {fileLineFeed = "Windows" }
    else { fileLineFeed = "Macintosh"}
    // create the output file accordingly
    fileOut = new File("~/Desktop/Histogram.log")
    fileOut.lineFeed = fileLineFeed
    fileOut.open("w", "TEXT", "????")
    // write out a header
    fileOut.write("Histogram report for " + docRef.name)
    // find out how many pixels I have
    var totalCount = docRef.width.value * docRef.height.value
    // more info to the out file
    fileOut.write(" with a total pixel count of " + totalCount + "\n")
    // channel indexer
    var channelIndex = 0
    // remember which channels are currently active
    var myActiveChannels = app.activeDocument.activeChannels
    // document histogram only works in these modes
    if (docRef.mode == DocumentMode.RGB ||docRef.mode == DocumentMode.INDEXEDCOLOR ||docRef.mode == DocumentMode.CMYK) {
        // activate the main channels so we can get the documents histogram
        TurnOnDocumentHistogramChannels(docRef)
        // Output the documents histogram
        OutputHistogram(docRef.histogram, "Luminosity", fileOut)
    // local reference to work from
    var myChannels = docRef.channels
    // loop through each channel and output the histogram
    for (var channelIndex = 0; channelIndex < myChannels.length; channelIndex++) {
        // the channel has to be visible to get a histogram
        myChannels[channelIndex].visible= true
        // turn off all the other channels
        for (var secondaryIndex = 0; secondaryIndex < myChannels.length;secondaryIndex++) {
            if (channelIndex != secondaryIndex) { myChannels[secondaryIndex].visible= false }
        // Use the function to dump the histogram
        OutputHistogram(myChannels[channelIndex].histogram,myChannels[channelIndex].name, fileOut)
    // close down the output file
    fileOut.close()
    alert("Histogram file saved to: " + fileOut.fsName)
    // reset the active channels
    docRef.activeChannels = myActiveChannels
    // Reset the application preferences
    app.preferences.rulerUnits = startRulerUnits
    app.preferences.typeUnits = startTypeUnits
    app.displayDialogs = startDisplayDialogs
    // Utility function that takes a histogram and name
    // and dumps to the output file
    function OutputHistogram(inHistogram, inHistogramName, inOutFile) {
        // find ouch which count has the largest number
        // I scale everything to this number for the output
        var largestCount = 0
        // a simple indexer I can reuse
        var histogramIndex = 0
        // see how many samples we have total
        var histogramCount = 0
        // search through all and find the largest single item
        for (histogramIndex = 0; histogramIndex < inHistogram.length;histogramIndex++) {
            histogramCount += inHistogram[histogramIndex]
            if (inHistogram[histogramIndex] > largestCount)
            largestCount = inHistogram[histogramIndex]
        // These should match
        if (histogramCount != totalCount) {
            alert("Something bad is happening!")
        // see how much each "X" is going to count as
        var pixelsPerX = largestCount / 100
        // output this data to the file
        inOutFile.write("One X = " + pixelsPerX + " pixels.\n")
        // output the name of this histogram
        inOutFile.write(inHistogramName + "\n")
        // loop through all the items and output in the following format
        // 001
        // 002
        for (histogramIndex = 0; histogramIndex < inHistogram.length;histogramIndex++) {
        // I need an extra "0" for this line item to keep everything in line
        if (histogramIndex < 10)
            inOutFile.write("0")
        // I need an extra "0" for this line item to keep everything in line
        if (histogramIndex < 100)
            inOutFile.write("0")
        // output the index to file
        inOutFile.write(histogramIndex)
        // some spacing to make it look nice
        inOutFile.write(" ")
        // figure out how many X’s I need
        var outputX = inHistogram[histogramIndex] / largestCount * 100
        // output the X’s
        for (var a = 0; a < outputX; a++)
            inOutFile.write("X")
        inOutFile.write("\n")
    inOutFile.write("\n")

  • Dimensions for the below cubes.

    Hi All,
    My interview Q was :
    Could you plz provide me the Dimensions for the below Cubes:
    0SD_C03, 0SD_C05, 0SD_C01, 0PUR_C01
    How to find out the dimensions from the help files?
    Any other Dimensions except unit, time n pkg Dim ?? Are there any particular/specific Dim for each of these cubes ?
    Thanks in Adv.

    Hi,
    0sd_c03 having following dimensions by default
    Data Package, Time, Unit, Organization, SD Document Category, Customer, Material, Value Type, Version, Sales Area, Document Classification.
    install your required infocube's from BI content.
    double click on the particular infocube. you can able to see the dimensions available for that infocube's.
    hope this help you
    regards
    harikrishna N

  • I-Trigue 3200 Cutting Out

    Hello all-
    I bought a pair of I-trigue 3200 speakers over Christmas break, and have generally been impressed- I really like the sound and design.
    However, they have in recent times started to cut out. Most frequently, it's just the sub that cuts out, but also they all die from time to time. When the bass goes out, the blue light on the volume control on the remote dims; when they all go out, it turns off. Smacking the remote fixes this and they all kick back on, but I'd prefer some advice because this is annoying.

    I have the same problem. Except today, when I turned on my computer, I couldn't listen to anything. Any trace of installation of this speaker system was completely gone. When I go to Start > Accessories > Entertainment > Volume Control, it says there is no speakers installed. When I go to detect new hardware, nothing. When I do Windows Media Player, every song of all my many songs comes up with an error. With Winamp, it says something along the lines of "Bad Driver". I go to get drivers, and there is none. I restarted, unplugged, started, replugged, everything, except nothing. I think it's a wire, because when I plug my MP3 Player into the volume control area, I get perfect sound. I tried wiggling the wires and whatnot, and no difference. PLEASE SOMEONE HELP ME

  • How to delete the members in one dimension use the maxl script

    i have question that i want to delete the members in one dimension useing the maxl script, but i do not know how to do it. can the maxl delete the members in one dimension? if can, please provide an sample script, thank you so mcuh.

    MaxL does not have commands to alter an outline directly, except the reset command which can delete all dimensions but not members selectively. The best you could do would be to run a rules file (import dimensions) using a file that contains the members you want to keepload rule for the dimension. As typical the warning is to test this first before you do it on a production database

  • How to Delete the dimension from the cube ?

    Hi ,
    how to Delete the dimension from the cube ?
    i have added the new dimension by assiging one characteristic to that dimension .
    now i  want to delete it ,
    but system saying that   Dimension ZXXX  contains InfoObjects; deletion not possible .
    how to delete it ? any help .
    Thanks

    Make sure you donot have any data in cube. If you have some data in cube, then you will not be able to see Delete option.
    Right click on the cube-->Delete data.
    Then double click on the cube>Goto Edit mode> select the IO under that Dimension> right click> now you will be able to see the Delete option (provided you have deleted all the date from Cube)
    Then right click on Dimension-->Delete
    Regards,
    Pavan

  • Two Cube dimensions with the same name.

    Hi
    If I have a cube dimension that has the same name as another cube dimension, will this be an issue when quering the cube through 1) Excel 2) SSRS or Cognos Reports?
    For instance: The Database dimension DimOrganization exists in cube A as well as
    DimOrganization_Dep. Both dimension has the same attribute names and the same hierarchy names.
    Their database names are different. (object_ID and Object_name differs) 
    In the cube I change the name of DimOrganization_Dep to DimOrganization.
    This seem to work when I query the cube in Excel, the mdx looks like this;
    SELECT NON EMPTY { [Measures].[AntalNotNull] } ON COLUMNS, NON EMPTY { ([Dim Organization].[Yes- No].[ Yes- No].ALLMEMBERS * [Dim Organization].[Yes- No].[Yes- No].ALLMEMBERS ) } DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME
    ON ROWS FROM [TEST] CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING, FONT_NAME, FONT_SIZE, FONT_FLAGS
    Anyone knows if this kind of setup will result in problems when quering from SSRS reports or Cognos?
    And/or if even though I get it right in the cube (quering from Excel) it might as well give me the wrong result the next time?
    Cheers
    /Martin

    Hi
    Thanks for the reply.
    I have tried and yes I can change then cube dimension namn to that of another cube dimension.
    For instance if i have Cube Dimension "DimA" and "DimB" to begin with , then  I change the name of the cube dimension "DimB" to "DimA". So now I have two Cube dimensions with the same name.
    It works to deploy and process and Excel somehow understands which one is which.
    Both is present in the same cube as you can see from the MDX above.
    The tricky part is how does the mdx return the correct result when the mdx looks like this (and it dpoes return the correct result).?
    Cheers
    /Martin

  • How to display properties of dimension on the input form and report in bpc

    Dear Expert,
    Please tell me how to display properties of dimension on the input form and report in bpc. I can only display dimension number.
    thanks so much
    hungth

    Hi Hungh,
    If your are using BPC 10 with EPM add in client, you can use the function:
    EPMDimensionProperty ()
    This function retrieves the properties of a specified dimension in a specified cell range.
    Thanks, Safa

  • Is it possible to change the dimensions of the project in CS5?

    Hello all,
    I am currently creating a digital sign which is split into 2 regions. In the first region I have a PowerPoint which displays menu items and their prices. In the second region, I want to have a video which I have edited in Premiere Pro CS5 and exported as an MPEG-2. The dimensions of the 2 regions are as follows:
    Region 1: 1303.2 x 1080
    Region 2: 616.8 x 1080
    Region 1 is all set (the PowerPoint) however, Region 2 has scaled down the video to fit inside itself. So instead of filling out the entire column, it has shrunk itself down to retain its unskewed dimensions. I am curious as to whether it is possible to output the video from CS5 so that the video's final dimensions were 616.8 x 1080 and thus would fill the column.
    Thank you for your time and your responses,
    Joe

    Good news.
    Now, the one issue will be those partial pixels, but you should be able to round those to full pixels.
    Good luck,
    Hunt

  • Is it possible to change the owning schema when generating datetime dimensions in the datasource?

    When creating a date time dimension using the dimension wizard and generate schema wizard, i would like to be able to change the owning schema from dbo to something else. The field is greyed out and I am unable to change it.
    Is it possible to change the owning schema when generating datetime dimensions in the datasource?

    Hi rkbjr,
    Thank you for your question.  
    I am currently looking into this issue and will give you an update as soon as possible. 
    Thank you for your understanding and support. 
    Thanks,
    Bin Long
    TechNet Subscriber Support
    If you are TechNet Subscription user and have
    any feedback on our support quality, please send your feedback here.
    Bin Long
    TechNet Community Support

  • Unable to assign the dimensions to the Applications

    Dear Experts,
    While i am assigning the Dimensions to the Consolidation Application i am getting the following error
    "THE FOLLOWING DIMENSIONS ARE SET AS CONCURRENT LOCK DIMENSIONS.[CATEGORY][P_CC]
    GO TO [CONCURRENT LOCK MENU] TO CONTINUE."
    Can you please guide me .
    Regards,
    Srinivasan.

    Hi,
    Concurrent lock settings are found in the admin console under application folder. You need to change (disable) concurrent lock settings for the application you want to modify. After modification you can reenable locking.
    Hope this helps
    Madis

  • What are the dimensions of the macbook pro 13 inch shipping box

    What are the dimensions of the brown shipping box that the 13-INCH MBP is shipped in including the weight. Please give the dimensions in the order Length, Height, and Width .

    I have one in front of me, albeit 2009. 14 x10.5 x 3". This was the shipping box it came in; there wasn't an enclosing box.

  • What are the dimensions of the Apple wired keyboard?

    What are the dimensions of the Apple wired keyboard?

    K1
    I am constantly amazed at our beloved Apple!
    Not only lack of info, but SysReqs seem a bit restrictive? How can a plain ol' USB keyboard require OSX10.6 or better, yet NOT support USB3.0 AND require some Apple software driver update? [sound of exasperation -> sigh]
    best as always
    CCC

Maybe you are looking for