Diminish & expand buttons are not lighting up?

Hi, just curious if any one has had problems recently with the diminish & expand buttons not lighting up on non specific windows .This has just started happening and I'm not sure what " com........plist " flie to chuck out.
If any body knows let me know.
Thanks Raff

Thanks Dean
Actually what happens is that the yellow minimize button just turns grey and quits working. Now that I think about it it also has happened with Mail and iCal. It has never happened with iPhoto or iTunes or any other application. There was talk that Safari enhancer may be responsible but, at least in my case, when I removed it the problem did not go away. I have never had the problem with my g-4 eMac, my g-3 iMac, or my g-5 iMac, only the G-4 933.
As of the last couple of months I have only had the issue with Safari and no other app. Trashing preference files even the finder preference files had no effect. Resetting Safari had no effect. Reinstalling Safari had no effect. There were about 10 other people who reported this issue at the time. I have not heard of it of late until this post appeared.
This is just one of those "who knows" kind of things. Even one of the Moderators jumped in and tried to help but we still could not find a permanent solution. Maybe one day I will wipe my drive and reinstall from scratch everything except my personal documents and files and see what happens. Right now that is just toooooo much work to solve what is to me a minor annoyance.
EDIT: I don't know it double clicking on the title bar works or not. Next time it happens I will try it and see. What are your thoughts on this?

Similar Messages

  • How do I send text messages from my Ipod touch?  The "send" button does not light up after typing in the message.

    How do I send text messages from my Ipod touch?  The "send" button does not light up.

    First of all, you need you have at least iOS 5 installed. Second, the person you are texting must have an iDevice with iOS 5 or higher installed. You can´t send messages to an non-iDevice. You´ll also need an Wi-Fi network to send iMessages. Hope it helped!
    Message was edited by: AppleTechTalk1100

  • Action Buttons are not getting displayed in UWL

    Hi Experts,
    I am facing some issues in UWL action buttons and I need your help in resolving this.
    When a request is generated in ECC systems, a notification is generated in ECC as well as portal.
    In ECC, we can see two buttons in the notification, "Complete" and "Cancel work item in Inbox".
    But in portal, these two buttons are not visible in the notifications.
    Please let me know how to bring these action buttons in UWL portal.
    Thanks a lot,

    First of all, please see SAP Note 1133821 - UWL Destination Service Configuration and create the RFC destination as explained in the note.
    The procedure is also explained in the wiki:
    http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=102793389
    Thanks,
    Shanti

  • Once I add my .swf to Dreamweaver, the buttons are not clickable, how can I fix this?

    Hello there,
    I'd just like to start out by saying that this is the first time I have posted on these forums, so if I have done anything wrong, I apologize!
    Anyway, about my question, just like the title says, once I import the .swf into Dreamweaver the buttons are not clickable, however when tested outside of Dreamweaver, they work correctly.
    Basically I have an animated banner with some audio and two buttons, the buttons mute and unmute the music.
    The file consists of two layers, one of which has 2 keyframes, the first keyframe has the Audio with the settings; "Effect: None. Sync: Start, Loop" and a button leading to the next frame.
    The next keyframe (still on layer one) has much of the same but the Audio settings are different; "Effect: None. Sync: Stop, repeat x 1" and this will stop the music.
    Now on the other layer (Rocket) I have a movie clip of a space-themed background and a rocket flying across it, the movie clip is made up of a motion tween and another movie clip which is the rocket.
    I am using Flash CS6 and Dreamweaver CS6 on a Windows 7 computer. I am also using Actionscript 2.0
    I apologize for the amount of information and I'm not very briliant at explaining things, so here are some images of the flash file, hopefully they'll help;
    Layer setup - http://i.imgur.com/iZHwfAw.jpg
    The movie clip - http://i.imgur.com/ayvPJUZ.jpg
    Keyframe one sound settings - http://i.imgur.com/LWbnQhO.jpg
    Keyframe two sound settings - http://i.imgur.com/7kS9dO2.jpg
    Actionscript for the first button/first keyframe - http://i.imgur.com/x6ROqPv.jpg   - (The second button/keyframe has the same code, but obviously the instance name and frame number has been changed)
    Again, I apologise if this all seems confusing!
    Thanks in advance for any answers to this question
    Adam.

    If you did not create this swf yourself then you won't be able to do what I am suggesting.  If you did, then open the fla in Flash and go into the Publish Settings and select the option to publish an html file as an output.  That will create an html page that embeds the Flash file.  Test that file in your browser and see if it plays properly.  IF so, then copy that code in place of whatever Dreamweaver did to embed the Flash.
    Dreamweaver is not a reliable tool for embedding Flash content... why it does not do it the same way Flash does it is anyone's guess.

  • PPT action buttons are not present in pdf file upon conversion

    Hi
    Am using Office 2003 (SP3) and Acrobat 8 (version 8.1.6).
    Have been using action buttons in the presentations for several years, works fine.
    When converting existing files, action buttons in both PPT show and pdf file just works, no problems.
    Newly generated presentations work fine as PPT show. But when converted to pdf file, the action buttons are simply missing.
    Have verified that all action buttons are "at front", same result.
    Have tried to avoid corporate templates by creating a blank presentation and building a small and simple navigating presentation. Again, works fine as PPT show. And again, upon conversion there are no action buttons present in the pdf file.Corporate changes thereby should be ruled out.
    Have checked all settings (including "Adobe PDF, Change Conversion Settings") between a working and a non-working PPT file, can't identify any differences.
    A colleague helped out (using Acrobat 6), same result. But upon activation of "Adobe PDF, Change Conversion Settings, Restore Defaults", the action buttons worked for him. Tried it with Adobe 8, no such luck.
    Have trialed the "Prep 4 PDF" tool, then the PDF file is complete and the "go to slide" keys appear and work again.
    All new updates available are installed, anyone experienced the same and found a fix for this trouble?

    Have tried both ways, same result.
    When working with new presentations, the pdf file is viewable, but the action buttons are not present.
    When working with past presentations, the action buttons are present and do work as expected.

  • HT3149 iPhoto 09 When I click on the preview pane to move a photo into edit, it shows up black and the edit buttons are not active.  How do I fix that?

    When I click on the preview pane to move a photo into the edit pane, there is no image just a black square and the edit buttons are not active. A few images in an event will move to the edit pane but most will not.  I cannot work with those images that do not enter the edit pane..no attaching to email, make a card, slideshow, etc.

    There are several possible causes for the Black Screen issue
    1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
    2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
    4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
    5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    If none of these help:
    As a Test:
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • File Upload Action Button are not working

    Hi  ,
    In the File Upload Process when the processor are open change request there are Action Buttons  Approve/Reject ,
    When the CR Processor are Click on either Approve or Reject  these two Action Button are not working (means its not show any activity) , while rest of all action button like save,close check , Run validation  are working ...
    While Processor has authorization to Approve/Reject that CR ...

    Hello Nikhilesh
    These buttons are dependent upon the workflow steps. Check that. Check the linkage for workflow. Check SWI6 - CR number and the step. Based on the step you can identify whether the proper step is assigned or not.
    Thanks
    Kiran

  • HT1430 iPhone 4s keypad the "o" and return button are not working - solutions?

    iPhone 4s keypad, the "o" and the return button are not working. Upgraded the software, now the "o" works in the verticle position only, and the return works in the horizontal position only. Help!

    Hi, VRS77. 
    Thank you for visiting Apple Support Communities. 
    I would start with closing any open applications in multitasking and restarting the device.  If unfamiliar with multitasking, I have included a screenshot on how to process an application close.  Test the results after processing these steps.
    iOS: Force an app to close
    If the issue persists, here are a couple addition troubleshooting steps I could recommend. 
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    Hope that helps,
    Jason H. 

  • With IE UIX buttons are not displayed correctly

    Hello there,
    We have developed an application using UIX. While browsing application using Internet Explorer I noticed that many of the buttons are not displayed correctly. Only some part of the button is displayed. Same thing happens while displaying some of the page logos and stuff. Did anyone have same problem? What's solution?
    Thanks,

    Hi Andy,
    sometimes half of button is displayed and sometimes the whole button image is distorted. if you refresh the page, it becomes perfectly fine. sometimes nothing is displayed but if you put mouse at the place where there should be a button, you would know that there is a button...
    it happens with random buttons...
    i haven't seen this problem in mozilla. its quite frequent in IE.
    our customer is very annoyed by this problem :(

  • Buttons are not displayed for the first time when drawImage method is used

    Hi
    In my swing window 2 buttons are there and when clicking these buttons, it should display an image . The two buttons are displayed at the first time and I can click on it . While clicking a button , the corresponding image is also got displayed. [ I am using drawImage() function for it] But what the problem is, then the two buttons are not displayed and it will be displayed again when the mouse moves along the position of these two buttons. And this problem occurs only at the first time..When they are on the window on a second time, they won't vanish when the image is displayed when clicking it. Is this the problem with paint() method?. I am using start() method also.
    Please help me!
    Thank You

    Hi
    This is not my exact program, that has a large no: of code. So I am putting here a sample one. One thing I would like to point out is that , I can see the buttons at the time of loading the applet and suddenly it vanishes and the image is drawn. Then if I move the mouse along the position of these buttons , they got displayed.
    import java.awt.*;
    import javax.swing.*;
    /*<applet code = MyClass width = 500 height = 500>
    </applet>
    public class MyClass extends JApplet
    Image img;
    JButton b1,b2;
    Container cp;
    Canvas1 cv;
    class Canvas1 extends JPanel
    public void paint(Graphics g)
    super.paint(g);
    g.setColor(Color.black);
    g.fillRect(0,0,500,500);
    img = getImage(getCodeBase(),"image1.jpeg");
    g.drawImage(img,20,20,this);
    public void start()
    cv = new Canvas1();
    cv.setBounds(0,0,500,500);
    cp.add(cv);
    public void init()
    setLayout(null);
    cp = getContentPane();
    b1 = new JButton("Button1");
    b1.setBounds(1,1,100,30);
    cp.add(b1);
    b2 = new JButton("Button2");
    b2.setBounds(200,1,100,30);
    cp.add(b2);
    It would be very helpful to me if you could fix the problem.
    Thank You.

  • On firefox clickable buttons are not clickable for me eg the + to open new tab ,the sign in . register and other applications buttons on this page wont click yet the 2 blue change buttons are fine

    Question
    on firefox clickable buttons are not clickable for me eg the + to open new tab ,the sign in . register and other applications buttons on this page wont click yet the 2 blue change buttons are fine

    Top of Firefox window non-responsive, toolbars non responsive -- also see [http://kb.mozillazine.org/Problematic_extensions Problematic extensions]
    *caused by Yahoo Toolbar -- https://support.mozilla.com/questions/890908
    *caused by Babylon Toolbar -- https://support.mozilla.com/questions/890670

  • HT1688 I can not restore and upgrade my Iphone 4. When i plug in to computer itune's restore and check for update buttons are not active.

    I can not restore and upgrade my Iphone 4. When i plug in to computer itune's restore and check for update buttons are not active. What is that mean?

    Razmee,
    Guess what? After posting, I read another thread on this topic where someone said they went to an Apple store and the tech person there added the optional username and password in the Outgoing Mail Server boxes, and then reset the phone again. Although I had tried resetting and restarting a few times today, I had NOT reset it after entering the username and password into the optional fields.
    When I entered my username and password into the optional fields, the iPhone entered checks (ticks) to the right of every entry; it had not done this earlier. (I didn't reset at this time, and the outgoing mail would still not transmit).
    So just now, I reset it and the outgoing email was sent!
    Thanks to you and this forum, it's a great ending to a few frustrating days.
    I hope this message helps others. Not only does everything have to be entered correctly in the respective boxes; but once everything is entered and you press the "Done" button, every box should then have a check mark next to it and then you must reset the phone.

  • Spelling and grammar buttons are not active

    I can not use spelling check nor grammar check because when I go in to Preferences my grammar buttons are not active and i can not click on my choices. Can anyone help me?

    Preference in Office Words
    You should ask your question in the newsgroup run by Microsoft:
    http://www.microsoft.com/mac/community/community.aspx?pid=newsgroups

  • The forward, back, refresh, and stop buttons are not working. Even after installing the latest version. Anyone else having this issue?

    The forward, back, refresh, and stop buttons are not working. Even after installing the latest Firefox update. Also my home page stopped loading upon startup even tho I have it setup to do so. Anyone else experiencing these issues? This is my second request for help and of course, Firefox on-line support is always closed.

    Those are all symptoms of a problem with the places.sqlite file, for details see http://kb.mozillazine.org/Locked_or_damaged_places.sqlite

  • All iPad buttons are not working even after resetting it (hard, soft and via iTunes).

    All iPad 2 buttons are not working even after I resetting it. I tried both of the hard and soft reset, and even resetting my iPad via iTunes. 
    The volume buttons work after I tried this method : "hold iPad in landscape mode. Push the home button while rotating it to Portrait mode, release it."

    I have the same issue, nothing I did fixed the problem, I would suggest if you can visit apple store and give us your feedback with them.
    for me I can't go to apple store because I don't have any store near me, I will have to wait for 2 months to travel!

Maybe you are looking for

  • Substitution written under cost center accounting is not working for tcode MB1B but working for MIGO_GI

    Hi All Do you know why this behaviour different for subtitution written under cost center accounting. We have written substitution using coding block table. Logic of substitution is in case of any GL maintained in a set is being used for posting , th

  • Finding the centroid of a polyline

    Hi. I am trying to write a function that will return the centroid of an input polyline. I have come up with two possible solutions, but both are problematic in different ways... This first function returns an error: ORA-00600: internal error code Our

  • AutoComplete in Relationship Editor

    Dear Unification experts We are now in the process of implementation of Drag and Relate to a R/3 type applications with business objects successfully imported to a business objects folder by following the help.com.  We use NW 04 SR1, portal sp9 and w

  • Critical transactions in GRC RAR 5.3

    Hi, we have an option in GRC RAR 5.3 to fetch the critical action report in informer. how can i add some more critical actions into the GRC, is there a facility in GRC RAR to add critical transactions or this should be done through backend??. kindly

  • Transfering files from old mac mini to new mac mini

    I just purchased a new mac mini intel duo OSX 10.4.10, with which I am using my existing monitor, keyboard and mouse. I want to transfer important files and software from my old original mac mini without having to purchase a whole new set of peripher