Dimnesion Key and SID

Hi Friends,
I have a cube, in which there are about 7 dimensions(excluding system generated dimensions). When i check the Fact table in the selection screen of the fact table i can see only 5 dimension keys and 5 SIDs (of the 5 dimenion keys 3 of them are for T/U/P) .
When i check the contectnt of the fact table it shows 5 dimens and 5 SIDs.
My question is why is it showing only 5 Dimension keys not 7? can someone please throw some pointers on this?.
Regards
BN

Hi Friends,
I got found why i have difference in the number of dimensions in the cube and the fact table.
Regards
BN

Similar Messages

Installation of 27" cinema display with macbook pro silver key and bootcamp

For everyone out there who may be interested in using the new 27" cinema display with an older Macbook Pro Intel with silver keys and bootcamp.
What is needed:
1. Apple 27" cinema display.
2. Macbook pro Intel silver key model
3. Altona Dual Link DVI to Mini DisplayPort Converter (Model AT-DP400)
4. Bootcamp 3.1 drivers from Mac OSX Snow Leopard V10.6.3(retail)
Procedure:
1. Update your display software on the Mac OS side. Apple has posted an update on their software downloads page, "LED Cinema Display Software Update 1.0" After doing so, make sure that the 27" CinDisp is operating correctly and you can change the brightness from the system settings.
2. On the Windows side, install the bootcamp 3.1 drivers. These are on the Snow Leopard distribution CD. However, there is a bug in the .msi installer that causes the installation to go into an endless loop. This must be resolved during the installation of the drivers. The following article discribes how to do this:
http://discussions.apple.com/thread.jspa?threadID=2305631&tstart=0
3. After you have successfully installed the bootcamp 3.1 drivers, then install Apple's bootcamp update: "Apple Magic Trackpad and 27-inch LED Cinema Display Update for Windows 32 bit".
Good luck, it works!

I have the same MBP and recently bought a 23" cinema display on Craigslist for $140. It works great. I had a display port to DVI adapter and it worked fine. Built a stand to hold the laptop vertically so it's out of the way. Don't know about older displays but anything with DVI should work fine.
The screen size and resolution are great for photo editing. I now have the best of both worlds, a display that rivals my wife's iMac and portability.

Product Key and Phone-in Windows Validation

Hello I have installed Win10 Eval on two different computers,
the other day the first one decided to update itself to the latest version.
Upon completion, it started to ask for Windows Validation, so I did a search
to get the appropriate key and entered it with success using the "slui 3" command.
So I decided to try the "slui 4" command and got the expected dial 800 # to automated phone support.
I called in and entered all the digits from all the boxes, and started to enter the valid codes in their A-G boxes,
except that there is supposed to be an H box, and there was none. I did this twice.
Even got the live person elevated phone support, they then transferred me to something called option 4 I think,
but the phone dialer didn't transfer the call properly, and the call was dropped.
Basically this is just to let you know that Box H was missing, but the dropped support call could be an issue as well.
I love the way the latest build installs straight from the disk, clean.
I also think that it comes off as very intuitive even as its installing, no more boring status bars, praying for it to reach the other side!!
Keep up the great work!!
Thanks for the opportunity to help.
Ant

.................ok so on the clean install, it seems to have activated itself without asking for the key entry.
That is the way it should be. By default, it is supposed to activate automatically. Only in rare circumstance one would be asked to enter the product key.
................is there any way to prevent it from doing it.
I'm sorry. I don't understand the question. Preventing it to do What ?
Prevent it from asking to activate ? If yes, like I said, it is supposed to get activated automatically.
................I will try again just to be sure.
You find enjoyment installing, don't you ? 2 hours of installing is not my cup of tea.
Well, enjoy.

HT5577 I lost recovery key and trusted device, how do I rescue my funds on account?

Lost recovery key and trusted dev, and need to transfer balance on account how do I do this?

You will need one of your trusted devices to be able to change your password : Apple ID: Can't sign in with two-step verification - Apple Support
Nobody else should be able to download from a new device or computer unless they have access to two of your password, a trusted device, and your recovery key. You are sure that they are using it e.g. there are a number of phishing emails doing the rounds saying that something has been downloaded on an account and to click on a link in the email if it wasn't you that made it so as to request a refund (i.e. so that they can capture your password and payment details).
If they are 'proper' purchases then you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Lost recovery key and no acces to trusted devices

i lost my recovery key and I can't get acces to my trusted devices, there's much money on the account but some else is using the account wich I don't know, an I want to change the pw but I cant

You will need one of your trusted devices to be able to change your password : Apple ID: Can't sign in with two-step verification - Apple Support
Nobody else should be able to download from a new device or computer unless they have access to two of your password, a trusted device, and your recovery key. You are sure that they are using it e.g. there are a number of phishing emails doing the rounds saying that something has been downloaded on an account and to click on a link in the email if it wasn't you that made it so as to request a refund (i.e. so that they can capture your password and payment details).
If they are 'proper' purchases then you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Diff b/w surragate keys and primary keys

Can any one of u pls explain the difference between primary key and surragate keys,pls explain me with simple example

Hi rajesh,
surrogate key: For every master data record, system create a SID (Surrogate ID). If that particular master data record is used in infocube, system store the SID corresponding to that master data in dimension table and the dimension id of the dimension table is stored in infocube Fact 'F' table.
Primary key: while creating a table we will select unique field and create as primary key..for eg empid acts as a unique key (primary key) for emp table. through this primary key we can identify the table to get the data from the table.
i hope this helps u.
regards
anil

RE: RE: Function keys and droplists

I had to implement the same problem in a window. I wanted Ctrl-F to be the
same as the "Fetch" button. I forgot the SetAsFunctionKey existed, so I
created a Menu choice with a shortcut of "Find." I have had no problems,
when
Ctrl-F is pressed the "menuWidget.activate" event is posted and no keystroke
events are sent at all.
Greg.Nyberg wrote>>>From: [email protected]
Date: Tue, 26 Jan 1999 10:20:40 -0600
Subject: RE: Function keys and droplists
Also note that if you set a cntrl-<letter> as a function key, any time the
user types that letter (without the cntrl) in any entry field on the window,
the field gets an "aftervaluechange" event fired. Normally aftervaluechange
doesn't fire until after you leave the field... This caused us significant
problems in the use of cntrl-<letter> key combinations, since we were
validating the contents of fields as the user left them in some cases. We
went back to only using the upper-row function keys, avoiding F1 (help) and
F10 which have undesirable side effects as you describe. F4 is also a
problem as it tends to open droplists before getting processed as a function
key, but we could live with that.
- -Greg
-----Original Message-----
From: Thomas Kunst [SMTP:[email protected]]
Sent: Tuesday, January 26, 1999 3:18 AM
To: [email protected]
Cc: Ostlund, Scott CWT-MSP
Subject: Re: Function keys and droplists
It is a general problem with the SetAsFunctionKey method that the
default behaviour of the key - which is present if you do not call
SetAsFunctionKey - is not disabled after the key is used as function
key. We have this problem under Windows: the F10 key has a default
behaviour of activating the window's menu. Now if you set F10 as
function key, the corresponding Forte event is posted to the window
but
the menu is still activated. Forte refuses to acknowledge this as a
bug,
but maybe requests from several people can convince them ...
Ostlund, Scott CWT-MSP wrote:
>
> Picture a grid with a bunch of widgets within it. Inside this
grid there is
> a 'Find' button accelerated with the letter 'F'. Also inside
there is a
> droplist. When the user places focus on the droplist and hits
Ctrl+F to
> shortcut the find button the method to handle the button click is
called but
> the droplist changes to the first element beginning with the
letter 'F' as
> well. Does anyone know of a way to not change the droplist when I
am
> handling the letter 'F' as a function key?
Dr. Thomas Kunst mailto:[email protected]
sd&m GmbH & Co. KG http://www.sdm.de
software design & management
Thomas-Dehler-Str. 27, 81737 Muenchen, Germany
Tel +49 89 63812-221 Fax -444
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

I had to implement the same problem in a window. I wanted Ctrl-F to be the
same as the "Fetch" button. I forgot the SetAsFunctionKey existed, so I
created a Menu choice with a shortcut of "Find." I have had no problems,
when
Ctrl-F is pressed the "menuWidget.activate" event is posted and no keystroke
events are sent at all.
Greg.Nyberg wrote>>>From: [email protected]
Date: Tue, 26 Jan 1999 10:20:40 -0600
Subject: RE: Function keys and droplists
Also note that if you set a cntrl-<letter> as a function key, any time the
user types that letter (without the cntrl) in any entry field on the window,
the field gets an "aftervaluechange" event fired. Normally aftervaluechange
doesn't fire until after you leave the field... This caused us significant
problems in the use of cntrl-<letter> key combinations, since we were
validating the contents of fields as the user left them in some cases. We
went back to only using the upper-row function keys, avoiding F1 (help) and
F10 which have undesirable side effects as you describe. F4 is also a
problem as it tends to open droplists before getting processed as a function
key, but we could live with that.
- -Greg
-----Original Message-----
From: Thomas Kunst [SMTP:[email protected]]
Sent: Tuesday, January 26, 1999 3:18 AM
To: [email protected]
Cc: Ostlund, Scott CWT-MSP
Subject: Re: Function keys and droplists
It is a general problem with the SetAsFunctionKey method that the
default behaviour of the key - which is present if you do not call
SetAsFunctionKey - is not disabled after the key is used as function
key. We have this problem under Windows: the F10 key has a default
behaviour of activating the window's menu. Now if you set F10 as
function key, the corresponding Forte event is posted to the window
but
the menu is still activated. Forte refuses to acknowledge this as a
bug,
but maybe requests from several people can convince them ...
Ostlund, Scott CWT-MSP wrote:
>
> Picture a grid with a bunch of widgets within it. Inside this
grid there is
> a 'Find' button accelerated with the letter 'F'. Also inside
there is a
> droplist. When the user places focus on the droplist and hits
Ctrl+F to
> shortcut the find button the method to handle the button click is
called but
> the droplist changes to the first element beginning with the
letter 'F' as
> well. Does anyone know of a way to not change the droplist when I
am
> handling the letter 'F' as a function key?
Dr. Thomas Kunst mailto:[email protected]
sd&m GmbH & Co. KG http://www.sdm.de
software design & management
Thomas-Dehler-Str. 27, 81737 Muenchen, Germany
Tel +49 89 63812-221 Fax -444
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Re: Function keys and droplists

It is a general problem with the SetAsFunctionKey method that the
default behaviour of the key - which is present if you do not call
SetAsFunctionKey - is not disabled after the key is used as function
key. We have this problem under Windows: the F10 key has a default
behaviour of activating the window's menu. Now if you set F10 as
function key, the corresponding Forte event is posted to the window but
the menu is still activated. Forte refuses to acknowledge this as a bug,
but maybe requests from several people can convince them ...
Ostlund, Scott CWT-MSP wrote:
>
Picture a grid with a bunch of widgets within it. Inside this grid there is
a 'Find' button accelerated with the letter 'F'. Also inside there is a
droplist. When the user places focus on the droplist and hits Ctrl+F to
shortcut the find button the method to handle the button click is called but
the droplist changes to the first element beginning with the letter 'F' as
well. Does anyone know of a way to not change the droplist when I am
handling the letter 'F' as a function key?--
Dr. Thomas Kunst mailto:[email protected]
sd&m GmbH & Co. KG http://www.sdm.de
software design & management
Thomas-Dehler-Str. 27, 81737 Muenchen, Germany
Tel +49 89 63812-221 Fax -444
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Also note that if you set a cntrl-<letter> as a function key, any time the
user types that letter (without the cntrl) in any entry field on the window,
the field gets an "aftervaluechange" event fired. Normally aftervaluechange
doesn't fire until after you leave the field... This caused us significant
problems in the use of cntrl-<letter> key combinations, since we were
validating the contents of fields as the user left them in some cases. We
went back to only using the upper-row function keys, avoiding F1 (help) and
F10 which have undesirable side effects as you describe. F4 is also a
problem as it tends to open droplists before getting processed as a function
key, but we could live with that.
-Greg
-----Original Message-----
From: Thomas Kunst [SMTP:[email protected]]
Sent: Tuesday, January 26, 1999 3:18 AM
To: [email protected]
Cc: Ostlund, Scott CWT-MSP
Subject: Re: Function keys and droplists
It is a general problem with the SetAsFunctionKey method that the
default behaviour of the key - which is present if you do not call
SetAsFunctionKey - is not disabled after the key is used as function
key. We have this problem under Windows: the F10 key has a default
behaviour of activating the window's menu. Now if you set F10 as
function key, the corresponding Forte event is posted to the window
but
the menu is still activated. Forte refuses to acknowledge this as a
bug,
but maybe requests from several people can convince them ...
Ostlund, Scott CWT-MSP wrote:
>
> Picture a grid with a bunch of widgets within it. Inside this
grid there is
> a 'Find' button accelerated with the letter 'F'. Also inside
there is a
> droplist. When the user places focus on the droplist and hits
Ctrl+F to
> shortcut the find button the method to handle the button click is
called but
> the droplist changes to the first element beginning with the
letter 'F' as
> well. Does anyone know of a way to not change the droplist when I
am
> handling the letter 'F' as a function key?
Dr. Thomas Kunst mailto:[email protected]
sd&m GmbH & Co. KG http://www.sdm.de
software design & management
Thomas-Dehler-Str. 27, 81737 Muenchen, Germany
Tel +49 89 63812-221 Fax -444
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Arrow Left key and arrow Up key and fn key not working properly !? Lenovo G580 PLEASE HELP x_x !

Hi guys i have a Lenovo G580 im not sure which version but i can tell you its intel i.3 and its got usb3.0 on it and 500gb hdd. 2.20Ghz 4.00RAM.
been days that i try to solve my Fn Key problem and also the arrow left and arrow up keys < i was using Win8 and downgraded to Win7 last week and that problem has occured since ,it misbehaves and it only works for a short amount of time it randomly works those keys FN.arrow up/left keys randomly they work , i upgraded again to Win8.1 now for the first few boots evrything worked well fn key and arrow keys np.< and now again it stops working.. and btw. whenever i press hard against it it would work pressing down the fn and arrow left/up keys when i press really hard it works but then again it doesnt Soo end of the story its not functioning properly and i have Energy management and Display driver HD 3000 installed and i still got this problem .. is there any fix to this anyone please !?

Hey mate the keys are faulty nothing can fix it except for buying a new Replacement! , i fixed the problem simply by Replacing the KEYBOARD ! i went downtown and looked for a g580 keyboard and they didnt exactly have the same version g580 they had c or b580 i dont remmber what letter it was sorry ! but the thing is the whole keyboard layout of many Lenovo Laptops are the same just look one thats the same, cause mine wasnt for G580 but the thing is its still working perfectly ! only problem is the Screws didnt fit i had to cut out the sides of the screw hole thingies to make the keyboard fit in well in my G580 , Simply put all you need is a new keyboard replacement buy one they cost between 20-40$ worth it cause you wont have any faulty keys anymore evrything will work fine. no need to reinstall anything just replace it with new Keyboard. and Plus its easy to replace it by yourself. i replaced mine by myself easily. Problem fixed.

Display key and text in dropdown box & suppress leading zeros in material #

Hi Everyone,
I have some questions on how to .... Can anyone help me? Here they are:
How to show material # and description (key and text) both in dropdown box list?
How to suppress leading zeros in material #, i.e. 0000000012345678 only show 12345678 ?
How to show a date with format mm/dd/yyyy not yyyymmdd?
Thanks alot, Jin
Edited by: Jin Freda on Mar 25, 2008 4:47 PM

Hi,
What type control you are useing for date .
If you are useing Input field of date type or Date picker control you should get this option in the control properties.
Can you tell me what are tabs are appaering in the conrtol properties.
2.When you you are using the formula Round(@material) ,Are you typing it or draging Field from right side in to the formula .If you did not drag it you will get Message:Formula has errors.
One more probelm is there if the Data type of field where you using formula is not Number type.
Check all above and get back to me.
3.You are not able to give 6 points for all because its a resrticed one you execeded giving6 points option now you can give only 10 points.
Regards,
GOVINDU

Output of cmd in command prompt as key and vaule in properties file

hi,
i want to get the value of any command which i run using cmd in a properties file as a key and value rather then getting it in text file
for example - hostname>output.txt [not good], i want it to be like hostname>output.properties with a key and its value as output.
command - `hostname`
output - userpc
but i want the same output in a properties file like
xyzkey=userpc in sample.properties file.
it would be a great help.
thanks
sid

I am sorry to say that it is not possible to understand what you are asking.
Please post a copy of your script with any error messages.
¯\_(ツ)_/¯

My I Mac does not start properly without pressing option and apple keys ,and it freezes

My I Mac does not start properly without pressing option and apple keys ,and it freezes

Try any of the following:
http://support.apple.com/kb/HT1379 Resetting your Mac's PRAM and NVRAM
Disconnect all devices from the computer then do the following:
Boot up from your Snow Leopard Install DVD while holding down the "c" key.
Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
Once this process has been completed restart your computer and repair permissions directly from Disk Utility.
If Disk Utility is unable to complete the repair, you will need to use a stronger 3rd party utility like DiskWarrior, Techtool PRO (not Deluxe) or Drive Genius.
Troubleshoot the spinning beach ball/freezing & crashing

Dimension ID and SID ID

Hi,
Can U let me know where exactly the dimension id(s) and SID(s) are stored in the BW star schema
Thanks

Hi,
DIM ids will store in Dimension table and SID's will store in Masterdata table.
Fact table is linked to Dimensional table and Dimensional table is further linked to SID table, and SID table further linked to 3 table's i.e. Attribute,Text and Heirarchies.
So, Dim ids create link between Fact table and Dimension table, SID's will link Dimansional table and SID table, and Character Id will link Attribute,Text and Heirarchy tables with SID table.
All this is Primary Forgin key relation
You can see SID's and DIM id's in SE11 tcode.
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
It may help you.
Thanks
Reddy
Message was edited by: Reddy

Window pops up stating"browser error" when trying to access documents using google doc's. Holding shift key and refresh does not clear window. What's next?

Shut down and restarted computer, "browser error" still pops up when trying to access documents using Google doc's.
Holding shift key and clicking refresh does not clear window.
What else can be done to clear the window and gain access to my documents?

Hi,
Found a note explaining the significance of these errors.
It says:
"NZE-28862: SSL connection failed
Cause: This error occurred because the peer closed the connection.
Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
Thanks & Regards,
Sindhiya V.

Resizing tab and side bar

how do you resize the tab and side bar? Downloaded Maverick and can't find where to resize even after looking in the preference. It is small.....

Could be corrupt plist. Try deleting both the com.apple.finder.plist and com.apple.sidebarlists.plist and relaunch Finder.
Finder>Go>Go to Folder> copy and paste:
~/Library/Preferences/com.apple.finder.plist
delete it.
Finder>Go>Go to Folder> copy and paste:
~/Library/Preferences/com.apple.sidebarlists.plist
delete it.
Now relaunch the Finder. The Finder icon is in the very left of the Dock, hold the control and option key click the icon>Relaunch

Dimnesion Key and SID

Similar Messages

Maybe you are looking for