DIMP ON ECC EHP4

Hi Experts
I had done a EHP4 upgrade of our ERP 6.0 and during the upgrade just took few components like APPL and HR which are now at 604.
But now we have a new requirement where in we need to implement DIMP 604.
How do I go about this?
Warm Regards
Madhav

Hello,
There is ECC DIMP 604 (a software component ) and Discrete Industry and Mill Products (a technical usage).
If you want to use EHPI to update Discrete Industries and Mill Products, you will be updating to 604 the following software components:
EA-APPL 604
ECC-DIMP 604
SAP APPL 6.04
I guess that your EA-APPL and SAP_APPL are already at 604, so if you use Maintenance Optimizer, select option 'Enhancement Package install', choose Discrete Industry and Mill Products as technical usageand there you would generate the needed XML, to update only ECC-DIMP to 604.
Sunny knows more about the upgrade tools to use after that than I do, I would have thought EHPI could be used, but it also makes sense to use SAINT.
I hope this information helps.
Best regards,
Miguel Ariñ

Similar Messages

SAP Installation in Cluster for ECC Ehp4 SR1 in one cluster

Dear Experts,
Platform is Windows 2008, SQl Server 2008, ECC Ehp4 SR1
In our project, we are implementing ECC 6.0 Ehp4 SR1. Prior to this release, we use to have ABAP & JAVA (dual) stack in single installation. But going through installation guides and posts in SDN understood that now ABAP and JAVA has to be installed separately with different SID.
We have installed development system with separate SID for ABAP stack and java stack in the same box. Similarly, we did it for quality system also.
Now, we need to install the production system which will be in cluster. Earlier we have done cluster installation for ABAP & JAVA stack which would come in same cluster only. But now, since ABAP and JAVA have to be installed with separate SID, can I install both ABAP and JAVA stack in same cluster with two nodes or do we need to have separate cluster for ABAP and JAVA. As of now, we only have two nodes available. If we need to go with separate cluster for ABAP and JAVA we need to get two additional nodes.
So, let me know whether we can use existing two nodes and create a cluster and install ABAP and JAVA with different SID's on it. I have gone through the installation guide and could understand that it can be done. Hence let me know, whether I can go with single cluster. If so, then would be the advantages and disadvantages.
Thanks & Regards,
Sharath

Hi Sharath Babu,
The ASCS & SCS instance must be installed and configured to run on two MSCS nodes in one MSCS
cluster. Ofcourse ESR is also on the same lines.
In brief, for each SAP system you have to install one central instance and at least one dialog instance.
For example, if your local instance on both nodes should have below listed items
<drive>:\usr\sap\<SID>\SYS
<drive>:\usr\sap\<SID>\ASCS20
<drive>:\usr\sap\<SID>\SCS10
And these above folders are junction point with Central Instance that's build in SAN Drive with similar set of folders
<drive>:\usr\sap\<SID>\SYS
<drive>:\usr\sap\<SID>\ASCS20
<drive>:\usr\sap\<SID>\SCS10
Regards
Sekhar
Edited by: sekhar on Nov 27, 2009 10:25 AM

Transfer configs in ECC 6.0 TRAINING MASTER Client to ECC EHP4

Hi all,
Good day!
I would like to seek your expert opinions on my situation below:
This is my scenario:
I have an existing ECC 6.0 IDES system and we are planning to build a new ECC EhP4 IDES in a new server.
ECC 6.0 has the following:
- Training Master Client (this has all the configurations necessary to conduct trainings)
EhP4
- New Traininig Master Client
Basically, we want to copy all the configs in ECC6.0 Training Master client to the new Training Master Client in EhP4.
Is there any way to do this?
Also, we want to copy all the user accounts from ECC6.0 to EhP4. How can we achieve this?
Would really appreciate your inputs on these,
Thanks in advance!
Regards,
Cha cha.

Hi!
I am assuming you are referring to the configs.. How about the data (test data, transactional data, etc)? Is there no way to transfer them to the new server?
How about the user master data? Basically, we just want to copy the users. As for the roles, we are planning to create new ones..
Thank you so much for taking the time to answer my questions.
Regards,
Cha cha

Language import takes too much time in ECC EHP4 system

Hi All,
We are trying to import the Languages in to ECC EHP4 system ...But each Language takes almost 48 hours to get imported.
and even the language supplementation takes too much time ...
Please help in tuning the memory parameter if required ...and the Data Base is DB2

Hi,
So what is your system details ?
OS ?
Have you just installed the system ?
Just upgraded to EHP4 ?
Any trace files ?
what is the system load.....
Mark

OS/DB Migration Plan for Sun+SAP4.6C + Oracle to Win2k8 Sqlserver+ECC EHP4

Hi All,
We are planning for Sun+SAP4.6C + Oracle to Win2k8 Sqlserver+ECC EHP4.
What strategy we have to plan and what need to do first migration or upgrade or unicode conversion.
Your thoughts and full SAP notes needed.
Regards,
Karthik.

Hi,
You can find all the information you are looking for at
service.sap.com/osdbmigration
Also look for Heterogenous System copy under
service.sap.com/systemcopy
For Unicode conversion, you can start with the SAP notes: 1319517,548016
Regards,
Vishnu

ESS and MSS SP Information for ECC EHP4 SP09

Hello,
We are in the process of upgrading our ECC and EP systems.
We are not able to find the appropriate version information for our ESS
and MSS SPs.
Current version Information:
SAP Enterprise Portal 7.0 EHP1 SP05 (7.01 SP05)
Business Packages:
SAP ECC EHP4 SP05
BP_ERP5COM 1.41 SP5
BP_ERP5ESS 1.41 SP5
BP_ERP5MSS 1.41 SP5
SAP_ESS 603 SP5
SAP_MSS 600 SP16
SAPPCUI_GP 603 SP5
We are upgrading from the above version of ECC to the following
versions:
New versions that we started upgrading to:
SAP ECC EHP4 SP09
EA-HR 604 36
SAP_HR 604 0036
SAP_ABA 701 0008
SAP_BASIS 701 0008
SAP_APPL 604 0009
There is no information available related to the corresponding ESS and
MSS SPs for the above versions.We have looked at a bunch of SAP notes
and the following article without luck:
https://wiki.sdn.sap.com/wiki/display/ERPHCM/HOWTOGETRIDOFSPSTACKMISMATCHISSUES
Can any one please suggest what version of ESS, MSS, and PCUI_GP Software
components need to be used for ECC EHP4 SP09 - HR 36?
Thanks,
Shanti

Thanks for your reply.
I see that the latest SPs available for ESS and MSS are following:
SAP_ESS 603 SP 8
SAP_MSS 600 SP 19
PCUI_GP 603 SP 8
Can I use these latest versions available or should I go with the versions you have suggested ?
Please suggest.
Thanks,
Shanti

Error in BW x ECC (EHP4)

We made two refresh P56 (ECC) -> Q56 (BCS) and PWU (BW) -> QWU (BW)
But not reestablish communication between Q56 and QWU.
Before re-establish communication gets upgraded EHP4 in Q56, which was successful.
After the upgrade we made the connection between QWU --> Q56 , but BW functional can not activate the datasources.
We use the note 886102 Scenario B3 to make such a connection, as well as we did in other activities of HSC.
In the system we have the source BDLS OK, OK we20, RFC OK, OK SMQR.
Is there a specific procedure for such cargo after EHP4 in Q56?
In BW RSA1 OK, active and replicated.
By running the program via RS_TRANSTRU_ACTIVATE_ALL SA38 datasources are not found active side ECC Q56:
Transfer Structure in Selected
It was also shown the datasources in the RSA1 QWU (0COMP_CODE_ATTR) and we'll find datasources were not to be activated.

Hi everyone!
The one I found out is authorization profiles for 2 roles were generated badly. Some of the auth. objects were added but some were not.
After regeneration, HANA allowed me to create BW project but there were also additional error messages. In su53 I checked that now is missing:
-- S_ADT_RES object with URI
/sap/bw/modeling/discovery
/sap/bw/modeling/repo/is/dbinfo
Keep on working further

Solution manager BPR for ECC EHP4

Hi All,
Is there a business process repository that includes EHP4 functionality?
In my company we want to build a template for QM processes, with EHP4 there is some new functionality offered and we would like to pull this information from the BPR into our template project to then evaluate with the business if this would be useful or not.
Thanks in advance,
Peter

Hi Peter,
You can check all the up-to-date content of the BPR structure delivered by ST-ICO in the following URL:
https://implementationcontent.sap.com/bpr
Kind regards,
Fabricius

Where can I find release notes for ECC EHP4 SPS 03

SAP used to deliver release notes. I want to find release notes for EHP4 SP03 but can't locate documents with what each Stack delivers.
Also same for java stacks? any idea where I can get this information?
Thanks
Wayland Yutani

Hi,
You can find all information related to EHP4 on http://service.sap.com/erp-ehp.
Thanks
Sunny

Upgrade from ECC EHP3 to ECC EHP4

Hi,
We are planning on a mini upgrade to the EHP4 patch. We are currently on EHP3. Is there a risk factor as in any upgrade ? I am just a little confused as they are only enhancement packs and their impacts on the functionality and lot of technical work that we have been doing.
Teresa

Hi,
> We are currently on EHP3. Is there a risk factor as in any upgrade ?
YES ! And contrary to what SAP says, I strongly advise to do some non regression testing even for non activated business functions.
Beware also of the Ehpinst runtime, it canbe very long and specially on the production system with the production load.
We just did a successful upgrade from ECC6 EHP 0 to ECC6 EHP 4 on the production system this weekend.
We estimated the cost, time and complexity of the project to be half of a full release upgrade. This was quite a bad surprise for the management..
Regards,
Olivier

ECC ehp4 A&D Subcontracting in combination with valuated sales order stock

Hello Experts,
a customer's Equipment (serialized material) is received in a valuated sales order stock (special stock E) and must be delivered to a third party service provider in subcontracting, with relevant spare parts (special stock O). The proces is originated in the Customer Service module where a "Returns and Repair" scenario supports the material return (inbound delivery) from Sales order type RAS Repairs / Service, on the plant, in a valuated sales order stock. Based on a repair procedure a Service order is created from the Repair order to track repair activities which are mainly executed at the workshop (planning plant). Our customer needs to deliver the component to an external service provider. Service order and Repair order have both a PS WBS account assignment.
Tracking of vendor's stocks levels with related deliveries and outputs is a must for the customer. Main Equipment to be repaired is stored in the sales order stock A. Components are stored in a different plant, in (valuated) project stock.
We activated the relevant business functions for Maintenance and Service processing in the Aerospace & Defense industry (MRO) including LOG_EAM_ROTSUB, A&D Maintenance, Repair and Overhaul AD_MRO_CI_1, Material Exchange with ATP Check AD_MRO_CI_2, Rotables/Sharing of Spare Parts, Subcontracting Improvements AD_MRO_CI_3 with exclusion of LOG_EAM_ROTSUB_2 for which EHP5 would be required.
The result is an error (AD_SUBCON094) that occurs when you try to create the subcontracting purchase requisition stating "You are using Subcontracting for MRO processes. During maintenance of the purchase requisition item or purchase order item, you set the account assignment to a PM/CS order. If you are additionally using a valuated project or sales order you would have two real accounting objects, therefore this combination of account assignment and special stock is not allowed.
Choose a different account assignment or a non-valuated special stock."
I'm also investigating on note 863154 - A&D subcontracting components from special stock. This note states that components must be on the same special stock which seems preventing again the above mentioned scenario. Please advise if you already implemented a similar process and if you have any way to support the same.
Thanks,
Stefano

Stefano,
Do you have a solution for this?
Best regards
Jose Marin

ECC-DIMP 604 upgrade

Hi exports,
I had alredy upgraded my ECC 6.0 Ready to EHP4, know i am trying to upgrade the component ECC-DIMP using SAINT.
My OS platform is HP-UX IA and DB is Oracle.
In the SAINT queue i had put both ECC-DIMP 603 and 604, along with stack.xml
While import during DDIC_ACTIVATION phase it failed and the log file shows "tp ended with return code 12 ".
I had checked the file system and data base tables, it seems ok.
Recently i had upgrated my kernel to 117, which is the latest one.
Also i had alredy gone through all the below mention notes, and taken action as necessary
Note 822380 - Problems w/ add-on inst/upgrade to SAP NW 7.0 AS ABAP
Note 874473 - Release strategy for ECC-DIMP as of ECC 6.0
Note 874471 - Additions for installing or activating ECC-DIMP on ECC 6.0
Note 1083533 - Installation of Enhancement Package 3 on SAP ERP 6.0
Note 822379 - Known problems with Support Packages in SAP NW 7.0x AS ABAP
Note 822379 - Known problems with Support Packages in SAP NW 7.0x AS ABAP
Note 1118803 - ECC 600 Support Packages and ERP enhancement packages
Note 1119856 - Description, tips and tricks for Attribute Change Packages
Note 1258938 - DDIC_ACTIVATION error during EhP4 installation
Please provide your valuable suggestion
Thanks & Regards
Dusmanta

Hi,
The problem is solved after applying SAP Note 1476315 - Error in activation protocol for switch framework.
You need to implement the coding corrections of the note to your system and restart import . If the note cannot be
implemented via SNOTE, as most likely the note assistant may be locked . Please ask one of your developers to perform the changes manually via SE80/SE24
Regards
Dusmanta.

Install Best Practices- Baseline Package for ECC 6.0 EHP4

Hi All,
I know its not the right forum to post this message, but posting here as i didnt get the info from the related forum, apologies for that.
Now we are planning to install SAP Best practices-Baseline Packages for ECC-EHP4 in our new server.
Can anybody help me out what are the steps to be carried out. Now we have completed installation of Linux & we want to install BP for General, not for any specific industry.
B/regds,
CB

Please post this question in SAP Basis Forum.
Alternatively, you can check documents in scribd/ help.sap.com
Raghavan

ECC 6.0 - EHP4 - Client Import

Dear Experts,
This is a reimplementation project. Previous company has installed & configured ECC 6.0 - DEV/QAS systems (ABAP stack only).
Now, we want a fresh installation of DEV/QAS servers with ECC 6.0 - EHP4.
The management wants to restore all the developments & customizings of the old DEV system (done by previous implementing company) in one of the clients after the fresh installation of ECC 6.0 - EHP4.
My confusion is that if I take a client export of the existing DEV client & then reinstall ECC 6.0 with EHP4 (ABAP+JAVA stack), then will I be able to import the client export data (please note that this old client was ABAP stack only with no EHP) into this new server?
Please help me on this. What will be the way forward for this scenario?
Thanks & Regards,
Ashish Khanduri.

Hi,
As rightly said above for ECC 6.0 with EHP4 you cannot install dual stack. You have to install ABAP and JAVA separetly. So, what I could suggest is
1) Your current ECC system instead of installing it freshly with ECC EHP4 and Importing client of old system (which is not recommended as there is lot of difference in patch levels) you directly apply EHP4 in current ECC system (which is ABAP) only.
2) If you need JAVA stack of ECC EHP4 then tale separate server and install it separately which will not have any impact on ABAP system.
Thanks & Regards,
Sharath

We are upgrading EHP4,What are the scenarios we will check in ECC and APO

Hi gurus,
We are upgrading (ECC )EHP4
What are the scenarios we will check in ECC and APO, kindly tell me gurus.
Regards
babu

Babu,
We live within a dream. The आत्मन् is real, all else is Illusion. Names are illusion. If DB49 does not suit you, then call me nameless.
Before you even release the software into the test environment, you must perform unit testing. Can every transaction that is used by your company be executed? Does every userexit/enhancement still perform the same task? Does every custom report work the same? All interfaces passing the proper data?
Merely testing the software itself will not give your company any assurance that it will support your business after you go live with it, so after unit testing comes integration testing and user acceptance testing. You must interview Key business users, and from their input you must develop and execute tests for 'business processes'. For example, one common business scenario (which contains many business processes), Order to Cash: Check whether your upgraded systems supports your ability to receive and enter an order, plan the parts, obtain the RM, build the parts ship the order, and book the cash. Or, another Scenario, Procure to Pay: Check if you can plan RM parts, create/release PR, create PO, send PO to Vendor, receive PO in stock, pay invoice, close month for accounting purposes.
These are two major business scenarios in most companies that use ERP. There are hundreds more that can be tested, If you work for a company that cannot afford to have any disruption in their business, then all activities that are normally done by any business user should be tested.
On the SCM side, during an ERP update, you have a smaller task (SAP usually does a good job with backward compatibility with their own modules). BW extractors must be tested. All integration models must be tested. All userexits must be tested. Publishing results/releasing results to ERP must be tested. The list goes on and on depending upon which SCM modules you have implemented.
Regards,
DB49

DIMP ON ECC EHP4

Similar Messages

Maybe you are looking for