DIO Connectors name/vendor on sbRio 9602

Hello,
i'm working with Altium Designer on a PCB on which i have to put a female connector that fits one of four DIO connectors on the sbRIO 9602 board.
Can you please tell me how this type of connector is called and if NI provide a library to import in Altium?
Thanks.
MR

Theese two links could be usefull; from the first one you can find information about layout
http://digital.ni.com/hardref.nsf/websearch/d922bf5c635e4ed7862574970065ab34
while from the second one you can find connector model
http://www.ni.com/pdf/manuals/374991c.pdf
You could find interesting also
http://forums.ni.com/t5/Circuit-Design-Suite-Multisim/Exporting-to-Altium/m-p/1973313
concerning your problem.

Similar Messages

Storing ItemCode,Vendor Name,Vendor Code in Database

Hi All,
i have created UDO in user defined form, in the form all the fields are stored in database except ItemCode,Vendor Name,Vendor Code. i want to know how to store these values. please help me, it's very urjent.
Jayanth

Hi Jayanth,
Maybe I need to enhance my English skills , but you wrote:
"...in the form all the fields are stored in database <b>except</b> ItemCode,Vendor Name,Vendor Code"
...ok in the subject you wrote "Storing ItemCode,Vendor Name,Vendor Code in Database" - so maybe this is a bit self-contradictory?
Anyway:
Can you please explain a bit more detailed what you want to do?
How are these values connected - or not - to your UDO?
Frank

Maximum data rate RT host can handle (sbRIO 9602)

Hi all, i got a sbRIO 9602,
in my application FPGA reads data from custom module @ 1Mhz, just i'm wondering if
RT host has the capability to read data and visualize it on a graph without losing samples.
I just want to know this before look how to implement any Bufferized/Producer consumer/DMA transfer 'cause
if RT host can't simply manage this data rate i will have soon or later buffer overflow.
Until now what i've thought is to copy 1000 contiguous samples in a memory in a ONE SHOT way, reading this memory from RT Host and visualize it on a waveform Graph.
But again if there is the possibility to show acquired data continuously is obviously better.
Thanks in advance.

Hi, thank you all for your suggestions.
In my RT Host i read 10000 values in every cycle so data rate drops to 1Mhz/10000 ->100Hz i think.
What i want to do know is to detect peaks in my data and create an histogram of that peaks in RT.
I've placed a peak detector VI that takes as input my array of 10000 values and generate an array with only peaks but i don't understand how to use Histogram PtByPt VI. It works with single data value at a time so to generate a consistent histogram i should wait 10000 cycles and so it may not be as fast as 100Hz .
Previuously i've tried to detect peaks and generate Histogram directly on FPGA to be sure to be as fast as possible due to 1Mhz data acquiring, but now with 10000 values chunk i guess if i can realize this on RT host side .
Any suggestion will be really appreciated.

CUP Connector names

Hello CUP Experts,
I'm certain that many of you have encountered this problem.
Each CUP SAP Connector must be named the same as the CUA system name or the logical system name.
- In the CUA case this is no problem.
But when I need to provision system families without CUA connection the problem starts.
We refresh our Q/A system from the Production system a couple of times per year, since the Q/A system is as big as the production system we let it have the same logical system as the production system.
- Our admins say that a logical system name conversion would take days and we don't have that time.
Here the CUP problem starts, I have to choose not to provision the Q/A system if I want to provision the production system because CUP forces me to use the logical system name as the connector name.
Has anyone been able to solve this?
Br,
Stefan Ericsson
+358-50-4867527

Hi,
I don't think so there is any option available in GRC to differentiate this thing as both have same logical names. Generally, after system refresh, BDLS needs to run which changes the logical hostname. I think you should run BDLS after system copy in the target system to change the logical system name. This is time consuming but it should be part of post-processing of system copy activity.
Thanks
Sunny

Role Provisioning failed for System(s) : Connector Name . Error Message : malformedRequest

Hi Everyone we are facing following issue in GRC-SAC-SAE 5.3_16.3. So far our CUP was connected to Enterprize portal (7.01) and auto provisioning for group to users worked. However now it is not working with below error.
Role Provisioning failed for System(s) : <Connector Name>. Error Message :
malformedRequest
Failed request now
Successful request used to provision
Regards,
Arpan Paik

Arpan,
We used to get those "malformed request" errors. We dealt with them by requesting the portal to be re-booted during the weekend maintenance window, making the portal security changes manually, cancelling the CUP request and notifying the requester. It's not a great solution, I know, but it was all we could come up with at the time. Then they upgraded the portal to NW 7.31, which is incompatible with GRC 5.3, and we have to do everything manually, so our situation went from bad to worse. Good luck!
Cheers,
Gretchen

Best option to mass deploy application to sbRIO-9602

Hi,
I need to deploy the labview rt application to a large quantity of 'sbRIO-9602's. What would be the best way of going about this?
All RIOs will have an identical setup.
The software drivers on the RIO need to be upgraded to the latest version.
FPGA bitfiles uploaded.
FTP folders created and files uploaded.
Any specific resources I should be looking at?
Solved!
Go to Solution.

Take a look at this .

SbRIO 9602 3d model (CAD, Altium)

Hi all,
I wonder if it's available a sbRIO 9602 3d model suitable to load in Altium in order to check correct correspondance between sbRIO and a custom board.
Thanks in advance.

We supply some example daughter card templates in Multisim/Ultiboard for all the various sbRIO platforms - and they have been checked and verified by R&D. I believe if you have purchased the sbRIO Developer's SDK you have access to addiitonal mechanical CAD drawing files in the docs, but I don't believe they are formatted specifically for Altium.
- Pat N

Connector name inside Remote enabled module

Hi
I have a remote enabled function module which can be called from any system.
But the problem is that I need to have to connector name inside the FM code through which the call has made.
Is it possible?
For eg. We may call the FM from a system like
CALL 'MY_REMOTE_MODULE'
DESTINATION 'connector_name'
EXPORTING
IMPORTING
Can I have the name of the connector(connector_name in above code) inside the FM code without explicitly passing it in exporting parameter?
Thanks
Ankur

Not sure if there is another way next to passing it as an additional parameter. Why is this simple solution not an option for you?
Thomas

How to get name of sbRIO programatically

How to get "name" and "Comment" of sbRIO which I write to sbRIO-9602 in MAX in Identification box (Model, Serial number, MAC address, Name)?
Solved!
Go to Solution.

That shows:
- IP settings
- IP adress:   136...etc.
  - DNS name:   MyMaster5 - THAT IS WHAT I NEED, just in wrong place - in MAX it is not in IP settings, that's why i didn't searched for it there.
  - subnet mask 255.255.255.0
  - gateway 136...
  - DNS server 136...
- MAC address 00800...
- serial number 16....
- system state Running
- model name sbRIO-9602
- model code 7373
- password protected restarts? T/F
- halt if TCP/IP fails? T/F
- locked?   T/F
- use DHCP? T/F
Still there is no "comment" as in MAX. But that's not so important now.
I have LW Development system 2009 SP1 Profesional, Realtime Development 2009 SP1
Thanks very much!

Installing OIM connectors using a different name.

Hello,
In my OIM environment, I have two target resources that are sun directories.
In my OIM env I installed an 9.0.4.12 SJSDS connector (OIM version is 9.1.0.2). The out of the box connector names all OIM artifacts using the convention IPLANET or IPNT (e.g. UD_IPNT_USR, adpIPLANETMODIFYUSER).
Since I want two instances of this connector I need to use a different name. To customize this name do I need to edit the xml files (iPlanetResourceObject.xml, iPlanetXLResourceObject.xml)? Seems very tedious and error-prone.
Has anyone done this, can you share your experiences.
Thanks,
Sunny

It is a very common method to enable support of multiple AD domains (with different ROs).
It is tedious and error prone but it is the easiest way to get this done. You may want to consider writing some XSLT to automate parts of the process.
Best regards
/Martin

Displaying Customer/Vendor's name on QA32 screen...

Dear All
Any suggestions on how to display the Customer's name/ Vendor's name on QA32 screen?
Is there any user exit to make this happen?
I don't want to go for the Z Transaction. If you can help me with the standard Tcode viz. QA32 then please reply.

Greetings Gaurav,
I don't think there's any ability to do this one in the standard, but maybe Bharat Rathod's information in this thread will help you with an enhancement...

Asynchronous serial input with an sbRIO FPGA

Background:
As part of my capstone project, I'm trying to read data transmitted serially from an IMU. The host is an sbRIO 9602.
As far as I'm aware, the protocol is not exactly standard: data is sent asynchronously in packets. Each packet consists of 12+ bytes in immediate sequence, each having a start and stop bit, and then the line goes idle [high] until the next packet. Each data byte is preceded by a frame bit, and only contains 7 bits of actual data, so the packet has to be further processed to get actual useful data.
I've seen the FPGA serial I/O example program floating around. The code I inherited was actually based on it, but it's overly complex for this application, and I'm not convinced it would actually work for this protocol at all. I couldn't get it to work, at any rate. I rewrote the sampling code in its entirety twice trying to get it to work, but haven't made a lot of progress. -On the bright side, the current VI is much simpler and more straight forward than my first attempt...
The problem:
I can read the first 70 or so bits of a packet fine, then the program skips a bit. That throws off the start/stop bits, and basically renders everything after meaningless. In this screenshot the data is as read in, in order from top to bottom:
I'm fairly certain this means my sampling interval isn't perfect [this suggests about 1.4% too long], but I'm totally stumped on how to avoid it. What's worse, this is actually on the lowest possible output setting from the IMU, 2400 baud. Realistically, we're hoping to have it working at either 230.4k or 460.8k baud.
The prior version of my code had the packet being read in 10-bit [1 byte] chunks, processing, then reading the next chunk. I encountered exactly the same error. I assumed that having too much code in the sampling process was causing the timing to be thrown off, so I changed it to read off the entire packet into a bit array and then process it afterward [while no data is coming in]. I've attached this version of the code for reference. It's cleaner, but no change as far as the error is concerned.
Am I correct in my evaluation, or is there something else going on? More to the point, is there a way of fixing or working around the problem so that I can get reliable samples [even at 100-200x the bit rate]?
As an aside, I've only been working with LabVIEW for a couple weeks; please tell me if I'm using poor habits or doing anything incorrectly.
Any help will be immensely appreciated. Thank you.
Attachments:
IMU_serial_in.vi ‏61 KB

Hi Ryan,
I have a suggested methodology, but I don't currently have any example code to share that would get you started.
The challenge you have is even if you sample at the exact right baud rate of your incoming signal, the phase of the FPGA clock will not be exactly the same as the source signal. Now complicate that with your sample frequency and baud rate will always be slightly different, and you will get the sampling drift effect you described where data eventually is clocked in wrong. On short transmissions, this may not be a problem because the sampling can be re-aligned with a start bit, but for long, continuous streaming, it eventually fails as the sampling and source signals drift out of phase.
I would suggest over-sampling the DIO line, using a debounce filter if necessary, and use a measured time between edge detections to constantly adjust your sampling period and phase to keep your sampling aligned with the incoming data.
The proposed LabVIEW code I imagine would be a single-cycle timed loop based state-machine. Essentially the state machine could detect edges that occur near the baud rate you expect to receive, and then would adjust the sampling period to ensure you are sampling the data inbetween transitions while the incoming waveform is stable.
With this method running at 40MHz, you would essentially have ~43 clock ticks/samples of each clock cycle at 921.6kbps, and you should be able to pull out the right samples at the right time in the waveform.
Hope this helps, and if I find a good example of this, I'll send it your way.
Cheers,
Spex
National Instruments
To the pessimist, the glass is half empty; to the optimist, the glass is half full; to the engineer, the glass is twice as big as it needs to be...

Deploytool: Can't specify a JNDI name for RA

Using j2eesdk1.4_beta2, it appears there is no way to specify a JNDI name for a Resource Adapter. Is there a default name I can use to look up my RA if I don't specify a name? The Deploy Tool help describes some tabbed panes appear to be missing from the appication. Is there a way to work around this problem until the final release comes out?

Headache!... That's what is expecting you in the DeployTool.
The deploytool generates invalid deployment descriptors for Resource Adaptors.
As you mentioned, it doesn't allow you to select a ResourceAdaptor implementation. In my case, I'm using my own Connection and ConnectionFactory and it didn't allow me to choose an implementation class for either interface neither.
I solved these problems by downloading XMLSpy and using the XML Schema to fill-in the gaps in the ra.xml descriptor. There I had also to include other mandatory elements that where not written by the deployTool, like: <display-name>
<vendor-name>
<eis-type>
<resourceadapter-version>
Regarding to the <<null>> error, it has to deal with an invalid sun-ra.xml. It's either empty or it's missing a mandatory element. I used again XML Spy here to give a JNDI to my adaptor.
I thought I was through it but I still can't deploy on the server. When I try, I get the following error:
<[INFO][j2eesdk1.4_beta2][][][12][javax.enterprise.system.tools.admin][03.november.2003 22:16:22:351 CET][ADM5604:Processing config change [Domain:add to xpath=/domain/applications
childXPath = /domain/applications/connector-module[@name='SimpleRAR1']]]>
<[INFO][j2eesdk1.4_beta2][][][12][javax.enterprise.system.tools.admin][03.november.2003 22:16:23:302 CET][ADM1041:Sent the event to instance:[ModuleDeployEvent -- deploy connector/SimpleRAR1]]>
org.w3c.dom.DOMException: NAMESPACE_ERR: An attempt is made to create or change an object in a way which is incorrect with regard to namespaces.
[.... 200 lines stack trace ....]
<[WARNING][j2eesdk1.4_beta2][][][12][javax.enterprise.system.tools.admin][03.november.2003 22:16:24:043 CET][ADM5603:Event listener error [null]]>
So far I haven't found a way to get solve this one. The <NAMESPACE_ERR> makes me think about the infamous 'locale' error of the deploytool, but I included the JVM parameters [USER_LANG=en,USER_REGION=US,USER_COUNTRY=US] in the server startup and it didn't change anything.
If you get further than that, please let me know.
-regards,
Gerard.

Report containing details of Payment released to Vendor -----PLS HELP ME

Hi All,
Pls Help me .
My client asking create new report.
they gave some fields also.
But, problem is my abap people asking which table will come data.
but i didn't have idea which table its take output.
pls help me
<<< Vendor Code >>>
<<< Vendor Name >>>
<<< Vendor Address >>>
<<< Vendor City >>>
Please find enclosed the details of payments released to you from << from selection date >> to << upto selection date >>
Document No
Cheque no     Date of Release
Vendor Invoice no
Vendor Invoice Passed for (MIRO Value)
PO no.
Basic Rate from PO
GR No.
Material & Description
Qty Invoiced (MIRO qty)
Qty Received (MIGO qty)
in above 4 feilds related to FI .
Pls help me what are the table can i give
thanks
supriya

hi,
select table ADRC:
sample (join with lfa1)
      SELECT name1 city1 post_code1 street
             INTO CORRESPONDING FIELDS OF ITAB
             FROM ADRC AS A INNER JOIN LFA1 AS L
              ON AADDRNUMBER = LADRNR
              WHERE L~LIFNR = P_LIFNR
               AND A~DATE_TO GE SY-DATUM.
or use one of the function modules from my 1st post
plz reward usefule answers
thanx and regards
Andreas

Inactive Vendor Report

Hello,
We're looking at cleaning up our vendor listing and looking for an SAP report that would give a vendor listing that have had no transactional activity in any specified time. Is there an existing report within SAP that would give at least the following:
Vendor Name
Vendor Number
Last date transaction processed
Blocking information
Thanks

Hi,
Please refer past threads:
Inactive vendor list
Vendor query list
Thanks!
Raju

DIO Connectors name/vendor on sbRio 9602

Similar Messages

Maybe you are looking for