DIO won't work until I use the Test Panel

Here is some strangeness. A program that works fine all of a sudden has an issue on a clean install. I am using a DIO-24 and after the PC has been wiped and and the software including the OS and drivers are reinstalled I get an error trying to access the DIO. Once I open the MAX test panel for the device (DIO-24), wiggle some lines, and close it all is fine. The program will continue to function fine. What "Magic" is happening when I open the DIO-24 in MAX?
Matt
Matthew Fitzsimons
Certified LabVIEW Architect
LabVIEW 6.1 ... 2013, LVOOP, GOOP, TestStand, DAQ, and Vison

I am saying:
Are you saying that after installing the driver and your device you had to open MAX and use test panels before your device would work with your application, and now you can always use your application (even after restarting your computer) without opening MAX? - Yes
Does this behavior only occur with your software, or does it occur with a shipping example too? - I Have not tried to run example after a fresh install so don't know
Are you using LabVIEW to communicate with your device? - Yes LabVIEW 8.0
If so, what version and what driver have you installed. If not, what programming language are you using? - NI DAQmx 8.0 for Feb 2006 Disk
Is this driver version the same that you had installed when you developed your application? - No, previous version
What operating system are you working on? - XP
Do you need MAX open to run your application, or do you just need to run it before your application? - Just run once and close before running application
Any additional information you can provide about what you are experiencing would be helpful.
I spoke the the engineer who gave me the information and he said it happens only some of the time. Most systems come up fine but a few require that MAX before the app will run correclty.
Matt
Matthew Fitzsimons
Certified LabVIEW Architect
LabVIEW 6.1 ... 2013, LVOOP, GOOP, TestStand, DAQ, and Vison

Similar Messages

In Windows 7 Itunes loads and runs fine. When I close it down and try to get back in it just sits there. It won't work until I reboot the computer.

I am running WIndows7. I boot up load itunes and it runs fine.. all aspects.
When I close it down and try to get back in later it just sits there. It won't work until I reboot the computer.
I have updated and reloaded several times. Nothing

Let's see whether this file APSDaemon.exe is the problem here.
Close your iTunes.
Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
Now open itunes and see if it is working?
If that works, make sure you do this below to prevent same problem after restarting windows:
Go to. START button, type in
MSCONFIG
Hit ENTER
Click STARTUP Tab, Uncheck "Apple Push", click OK.
Restart Windows.

C and H keys won't work unless I use the shift button. How can I fix this?

Now the 'V' button no longer works unless I use the shift key. I do not enjoy having to switch back and forth between cap-locks on and cap-locks off.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Adobe Ilustrator stop working when I use the Exchange Panel

I try to use the Adobe Exchange Panel in ilustrator but it stop working when I click on "my stuff" button

What platform and version are you using? If CS6 try updating to 16.04.

I've updated to Maverick and now my iPhoto app won't work until updated. The problem I'm experiencing is that my Apps store won't grant me access to update the app. help.

Included are screen grabs of some of the message prompts I'm recieving when attempting to update my iPhoto app.
*side note: my operating system recently crashed, and my comptuer was wiped, so 'salvaging' photos from the current app is not a factor since they've been backedup externally already.

Please test after each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Step 1
Select the Purchases page in the App Store and locate the app(s) in your purchase history. If there's a button markedACCEPT on the right, click it.
Step 2
If you're trying to update iLife or iWork apps that were installed from a purchased DVD, or if you have a refurbished Mac bought directly from Apple, contact App Store customer service for a redemption code. You may be asked for the part number of the DVD.
Step 3
From the App Store menu bar, select
Store ▹ View My Account
Enter your Apple ID password at the prompt. At the lower right corner of the window that opens, click the Reset button. Close the window.
Step 4
If you have a used Mac, the bundled apps were linked to the original owner's Apple ID and can't be transferred to you. Reportedly, customer service has issued redemption codes to some second owners who asked, but it's not guaranteed.
Step 5
Delete the app(s) you want to update and reinstall them.

Hotspot won't work until reboot

I have an LG G2 on android 4.4.2.... and my hotspot won't work until I reboot the phone. This is extremely annoying, as the only time I need the hotspot, I need it NOW, not in a few minutes. How to fix this?

Snn5,
Gotcha! Having a software update failure is definitely not normal. We need to get that software installed, and we need it to go smoothly for you. This may require a Factory Reset. Please back up your phone's information first as a factory reset will erase the entire phone and then follow these steps -> http://vz.to/1lGsddB Let us know if the hotspot is still misbehaving after the reset is done.
SarahO_VZW
Follow us on Twitter @VZWSupport

Must use Step Input Keyboard prior to using midi controller? When I attempt to use my midi keyboard conteoller for step input, it won't work unless I input the first note in each track via the Step Input Keyboard. This doesn't seem right...

When I try to use my midi controller keyboard for step input, it won't work unless I input the first note in each track via the Step Input Keyboard.. What am I doing wrong?
Logic Studio 9.1.7, OS X 10.7.5

Hi
Playhead in the right place?
CCT

I just installed Lion 3 days ago, now my audio won't work, unless I use headphones, also space bar glitches, and other software issues..MacBook Pro 15 inch, and most everything is messed,,but the audio is killing me.

I installed Lion a few days ago, ever since then my audio won't work, unless I use my headphones. Also, the saver screen with password changes frequently, and the space bar works when it wants to. There are many other issues I am having. My IPhoto,,does not work properly, pages is not working, I have all versions. The Office Suite is acting strange, and my email accounts work when they want,,,my IPhone 4 won't sync anymore. The list is endless...does anyone else have this problem?

Your wifi problem sounds very much like the problem I had. The wifi would drop out, the icon showed it was still connected. If I turned it off, I couldn't turn it back on. Another user here pointed me to the problem, which was the wifi cable (the flat cable goint from the card to the motherboard). I found it on ebay for $13 and it's been running fine since I replaced it. This is the repair guide for your machine. The part number will be on there if you click the link.
http://www.ifixit.com/Guide/MacBook+Pro+15-Inch+Unibody+Late+2011+AirPort-Blueto oth+Cable+Replacement/7510

When I try to delete message threads on my iPhone 5, the message app won't work until I restart my phone. Once it restarts, the message threads that I tried to delete are still there. Any advice?

When I try to delete message threads on my iPhone 5, the message app won't work until I restart my phone. Once it restarts, the message threads that I tried to delete are still there. Any advice?

I recently spoke to someone from Apple support, and here's what I gathered:
"Older" phones (read: anything iPhone 4s or older?) sometimes have trouble keeping up with the processing demands of the newest software. When deleting threads with a lot of media (photos, videos, etc), it can take a lot of processing to successfully delete. What this support tech suggested was picking some of the bigger threads at night before you go to bed, deleting them, and then leaving the phone alone-- and plugged in-- overnight to give it enough time to delete everything. He suggested not even pressing the lock button; just leave it to process (though I imagine the screen will lock on its own anyway).
Not sure if it works yet since I just spoke to him, but it's the closest thing I've got to a solution!

Why won't my camera work? I used the screen shot for the first time and since i did that every time i take a picture the shutter closes as though it's taking it but no picture gets taken...help! Any suggestions?

Why won't my camera work? I used the screen shot for the first time and since i did that every time i take a picture the shutter closes as though it's taking it but no picture gets taken...help! Any suggestions?

Hey briannagrace96,
Welcome to Apple Support Communities! I'd check out the following article, it looks like it applies to your situation:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/ts1363
You'll want to go through the following troubleshooting steps, and for more detail on each step follow the link to the article above:
Try the iPod troubleshooting assistant:
If you have not already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
If the issue remains after following your iPod's troubleshooting assistant, follow the steps below to continue troubleshooting your issue.
Restart the iPod Service
Restart the Apple Mobile Device Service
Empty your Temp directory and restart
Verify that the Apple Mobile Device USB Driver is installed
Change your iPod's drive letter
Remove and reinstall iTunes
Disable conflicting System Services and Startup Items
Update, Reconfigure, Disable, or Remove Security Software
Deleting damaged or incorrect registry keys
Take care,
David

HT3964 On my macbook pro my keyboard backlight won't work but it use to. I think i pressed something in the settings? please help me!

The backlight on my macbook pro isnt working but it use to work before by using the F5 and F6 keys. I think i pressed something in the settings to change this. please help me!

If you are in a well lit area this will pop up on the screen.

TS1538 Hi, I have the problem which iTunes cannot detect my iPhone 4s. I tried the steps you have provided in your troubleshooting, but it won't work for me because the Apple Mobile Devilce is perfectly installed on my windows.

Hi, I have the problem which iTunes cannot detect my iPhone 4s. I tried the steps you have provided in your troubleshooting, but it won't work for me because the Apple Mobile Devilce is perfectly installed on my windows. However, the driver "Microsoft teredo Tunneling adapter" has a yellow exclamation mark, which i believe means it's not installed correctly or something is wrong with it. This driver is under the Network Adapters (Please see picture below).
This is what happens when I connect my iPhone 4s to my laptop (Windows 7 Starter 32-bit)
1. The phone charges it's battery
2. I can open it in My Computer and import/export media files.
In iTunes
3. It start to sync until step 3 then stops.
4. The iPhone option with an arrow appears beside the iTunes Store, but when the arrow is clicked it disappears.
I hope you can provide me a solution for this problem.
Thanks,
Ralph

Hi ralphagir,
Welcome to the Apple Support Communities!
For your iTunes issue with it not recognizing your iPhone, I would go ahead and suggest deleting iTunes and all of its components from your Windows computer and installing fresh.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Remove iTunes and related components from the Control Panel
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
As far as the arrow button that you click and the iPhone disappears, it sounds like you may be clicking on the eject button. Please take a look at the following article for information on the eject button in iTunes.
Safely disconnect iPod
http://support.apple.com/kb/HT1853
Have a great day,
Joe

HT1430 my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

There is a hardware problem. Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.

My MIDlet won't work in pratical use??

I have developed a MIDlet with using HTTP connection.. and it work fine when tested in my PC and Emulator!
my question is it won't work once i change the URL from
http://Localhost:8080/examples/servlet/LoginServlet
to http://219.93.218.177:8080/examples/servlet/LoginServlet
##pls note that i using ADSL 4 port router to connect to internet....
I appreciated every suggestion from u guys.. thanks in advance!!

is your port 8080 open?

I want to turn my macbook air off. the shut down button already appeared but the mouse/cursor just hang and won't work. even after pressing the enter button to shut my mac off won't work. what will i do?

i want to turn my macbook air off. the shut down button already appeared but the mouse/cursor just hang and won't work. even after pressing the enter button to shut my mac off won't work. what will i do?

This is not a reply. I just want to elaborate on this problem.
My computer freezes occasionally when it is used after being sleep for a while. The spinning ball appears and everything is totally disabled. Nothing on the keyboard works.
The mouse moves, but does not work.
The only solution is to turn the power off and on (losing all data in open applications.)
I kept the System monitor running on the side to find out which program was running when the computer froze. The Monitor as well as all other applications froze, but the data showed:
Firefox 18.4%
Activity Monitor 0.9%
Firefox Plugin 0.2%
This is all the information I have. By the way, I am using iMac with OS 10.6.

DIO won't work until I use the Test Panel

Similar Messages

Maybe you are looking for