Diplay Variant Contents - RS_VARIANT_CONTENTS Problem
Hi ,
I am using FM RS_VARIANT_CONTENTS to read the values for Variants ,
Here the Variants are created for Transaction FBL5N ..which had Dynamic Field Selection ...when i use the FM i can see Values of only screen fields in the VALUETAB not the Dynamic fields ...how do i retrive the Values for the Dynamic Fields ...
Any help would be appreciated
Thanks
Hemal
Have you tried putting your RS_VARIANT_CONTENTS logic within the "initialization" event so that it only executes once, and not each time the selection screen is redisplayed..?
Jonathan
Similar Messages
-
Adobe Content Viewer problem. Please Help me...
Hi after updating online. Folio, I tried to update the trial version of the publication on my iPad but I get this message: "the issue isavailable for dowload, but new signing for an application version. Update the application from the App Store. "I went to the AppStore and was not any update of the Content Viewer ... I deleted the version on my iPad I downloaded again ... but without success gives me the same problem ... Please help me ... how can I do??
thanksHello Bob and thank you for responding so quickly ... Would you be kind enough to send me the link where I can download older versions of Folio Builder and Folio Producers Panel tools for InDesign 5.5. I'm looking for them but I can not find them.
Thank you for your patience.
Il giorno 21/gen/2012, alle ore 16:18, Bob Levine ha scritto:
Re: Adobe Content Viewer problem. Please Help me...
created by Bob Levine in Digital Publishing Suite - View the full discussion
As discussed in numerous threads already, the new viewer has not been approved by Apple yet.
If you’re a pro or enterprise customer you can create your own viewer app. If not, you’ll have to wait or roll back to the older tools.
Bob
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4155907#4155907
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4155907#4155907. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Digital Publishing Suite by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
How to debug file content conversion problems?
Hi,
I'm trying to debug a file content conversion problem. I'm mapping a few nodes in an IDOC to a file of fixed length fields. I'm using the "<Node A>.fieldFixedLengths", "<Node B>.fieldFixedLengths", "<Node C>.fieldFixedLengths", etc. parameters to specify the fixed length records.
However, a certain node (for e.g. Node B) is causing a problem and if it is present in the IDOC, the output file does not get created. Upon checking the XI monitor, I notice that the file gets mapped correctly and thus the problem lies when the file adapter does the file content conversion. How do I debug this because there is no descriptive error in the XI log? If this node is not present, the file gets generated fine.
Thanks,
Basant GuptaHi,
If your SXMB_MONI shows, success status, then go to RWB->Message Monitoring->Message display tool and then check Audit log for the analysis,
So it wil help you debug the situation.
If there is no error, then check RWB->Component Monitoring->Adapter Monitoring for you file communciation channel..
/people/michal.krawczyk2/blog/2005/01/02/simple-adapter-and-message-monitoring
Regards,
Moorthy -
Hi. I've got that content protection problem when downloading from blackberry app world. Every time I try to download something, a message comes up that says, "An error has occurred communicating with the BlackBerry App World Client. If you have content protection enabled on your device, please disable and try again,". I'm sure a lot of people had this problem and many of them have had their problem solved, but i've already tried solutions like disabling the encryption and doing the battery pull but the message still comes up.
Are there any other solutions that I can try?
Thank you in advanceHello timothyW,
Welcome to the forums.
Have a look at this article for help changing the content protection settings on your BlackBerry® smartphone.
KB11963
How to change the setting for Content Protection on the BlackBerry smartphone
Hope this helps. Have a good day.
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
Extended Content type problem
I want to extend the content type 'ExtendDocument' from 'Document'.
So I use 'Oracle Internet File System Manager' to create a new Class Object named 'EXTENDDOCUMENT', which is extend from 'DOCUMENT', and add a attribute 'EXTENDURL'.
This Class Object's bean class is 'ifs.beans.ExtendDocument' and server class is 'ifs.server.S_ExtendDocument'.
I create these 2 java class and put the class files to ORACLE_AS_HOME\ifs\cmsdk\custom_classes directory.
As I want to set the object type as 'ExtendDocument' when uploading a file which expend name is '*.wmv', so that need to change 2 default value 'ParserLookupByFileExtension' and 'IFS.PARSER.ObjectTypeLookupByFileExtension'
So I add 'name=wmv, datatype=STRING, value=oracle.ifs.beans.parsers.ClassSelectionParser' to ParserLookupByFileExtension.
And then add 'name=wmv, datatype=STRING, value=EXTENDDOCUMENT' to IFS.PARSER.ObjectTypeLookupByFileExtension.
After done above actions, i restart my oracle application.
I use CUP to upload a test file 'test.wmv' to CMSDK repository, and its type is 'EXTENDDOCUMENT'.
But if I use FTP or WebStarterApp application to upload 'test.wmv' file to CMSDK repository, then its type is 'DOCUMENT'.
Why and how to change to make FTP and WebStarterApp application can upload *.wmv file's type as 'EXTENDDOCUMENT'?
anybody can help me?
thanks.Nirav-P-Thakar wrote:
FileNameMap fnmMime = URLConnection.getFileNameMap ( ) ;
fnmMime.getContentTypeFor(fileName);
URLConnection.guessContentTypeFromName(fileName);I have tried out both methods but it returns null when the file is of type MS Office or Open Office.In reply 1 BalusC said..
"Alternatively you can use ServletContext#getMimeType() for this. It guesses the content type based on the mime mapping as it is been definied in the web.xml of the application server and the webapplication. If it returns null, then you need to add new <mime-mapping> entry to the web.xml."
I would try doing it this way. Try including entries for the mime mappings in the deployment descriptor of the web application. -
Hi All,
I want to see the variant contents in database table.
Could someone tell the table name where report variants are stored and their contents as well OR any such function module from where if I give some contents used in some variants, it should give me the variant names.
The basic requirement is i want to search for variant names where a particular pattern e.g. 'ABCD' has been used in the variant's selection screen.
Looking forward to your favorable replies.
RegardsHI Mahesh,
Don't know if there is a function module to suit your needs.. but you can check out the following tables..
VARI - ABAP/4: Variant storage (similar to INDX)
VARICON - Selection variants: Content
VARICONCI - Selection Variants: Content (Cross-Client)
VARID - Variant directory
VARIDESC - Selection Variants: Description
VARIDESCCI - Selection Variants: Description (Cross-Cli
VARID_CI - Variant Catalog, Cross-Client
VARINUM - Internal number assignment for variants
VARIS - Assignment of variant to selection screen
VARIS_CI - Assignment of Variant to Selection Screen
VARIT - Variant Texts
VARIT_CI - Variant Texts, Cross-Client
VARK - Delivery Plan: Customer-Specific Itinerary
VARZ - Delivery Plan: Zone-Specific Itinerary
Regards,
Suresh Datti -
Hi,
I am facing some problem in FCC for Receiver adapter. It has to convert from XML to CSV File.
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:PaymentFull_Target xmlns:ns0="http://sdn.com/Payment">
- <RECORDSET>
- <Header>
<LineItem>1</LineItem>
<SaleNumber>102</SaleNumber>
<TransNumber>105</TransNumber>
<Store>1326</Store>
<variant>Z6</variant>
<TransType>NEW</TransType>
<Adjustm_Type />
</Header>
- <Header>
<LineItem>2</LineItem>
<SaleNumber>102</SaleNumber>
<TransNumber>105</TransNumber>
<Store>1326</Store>
<variant>Z6</variant>
<TransType>NEW</TransType>
<Adjustm_Type />
</Header>
- <Header>
<LineItem>3</LineItem>
<SaleNumber>102</SaleNumber>
<TransNumber>105</TransNumber>
<Store>1326</Store>
<variant>Z6</variant>
<TransType>NEW</TransType>
<Adjustm_Type />
</Header>
</RECORDSET>
</ns0:PaymentFull_Target>
Output File is coming only with lineitem values , remaining fields are not coming.
*1,2,3*
FCC Used...
RecordSet Structure -- Header
Header.fieldNames -
LineItem,SaleNumber,TransNumber,Store,variant,TransType,Adjustm_Type
Header.fieldSeparator----- ,
Header.endSeparator----- 'nl'
Did I miss anything.. any idea whats going wrong?
Thanks
DeepthiHi Deepthi,
Mention the occurrence of header in Recordset
You specify like this:
Recordset: Header, *
Header.fieldSeparator : u2018Field Separatoru2019
-->For FCC on Receiver side you donu2019t have to mention the field names.
-->The u2018endSeparatoru2019 parameter needs to given for substructure only
Check this links:
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
/people/shabarish.vijayakumar/blog/2007/08/03/file-adapter-receiver--are-we-really-sure-about-the-concepts
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
Rgds,
Akhila -
Extract Dynamic Variant Contents
Hi
I have the requirement where I need to extract the vlaues of variants(Dynamic Variants).The contents of dynamic variants
can be extracted using the FM 'RS_VARIANT_CONTENTS' but only for programs where Logocal Databases(LDB) are used.
There are some of programs in SAP where LDB's and they have the dynamic selection screen.In this case the FM doesn't return
the contents of dynamic variant.
Could you please provide any FM or class which could return the contents of dynamic variants?
Thanks in advance
Davinder SinghPlease, post your solution.
Best regards,
Leandro Mengue -
Hi,
Tell me how to view Contents of Variant(Field Name - CLUSTD) which is store in VARI Table as some another form by passing Report Name and Variant
Kunal ShethHi,
There are actually Function Modules to do this:
RS_VARIANT_CONTENTS
RS_VARIANT_VALUES_TECH_DATA
Use these with care because for some reason they cause a regeneration of their ABAP.
Rgds,
Mark -
Specifying pdf document's name in browser - content-disposition problem
Hello ,
I want to open a PDF document in browser, which needs to have a specified filename when user tries to save it.
My web app sends an "application/pdf" document back to the browser.
I use the Content-Disposition HTTP header to instruct the browser to open the document inline, i.e. using the appropriate plugin, which is Adobe PDF in this case. When the user clicks Save As..., the document filename needs to be the one specified by the same HTTP header. Here is the code:
response.setContentType("application/pdf");
String contentDisposition = "inline; filename=\"filename.pdf\"";
response.setHeader ("Content-Disposition", contentDisposition);
response.setHeader ("Content-Length",new Long(file.length()).toString());Unfortunately this does not work for me. Document opens fine, but I can't get it to have the name I specified. The plugin uses the default name, which is the full URL of the document. I tried several combinations of HTTP headers, but neither worked. I tried putting an additional GET request parameter at the end of the URL, like ...&filename=filename.pdf , but that didn't work either.
I tried Adobe 7.0 and 8.1.2.
Any suggestions ?
Thanks a lot!Thank you very much for your answer.
Needless to say I tried opening the document in IE, FF and Chrome, and neither worked.
I had a look at the code at your web site, and saw that you were serving files for direct download: Content-Dispositoin:attachment... .
This works fine for me too, and the filename is recognized correctly in that case. The problem is, I want to display the PDF inline...
My server is not configured for URL rewriting, and I would be probably quite some problem to make this app work with it, so the /filename.pdf is not an option for me.
Edited by: matavulj on Sep 25, 2008 7:21 AM -
FIle Content Conversion Problem in IDOC-XI-File Scenario
Dear All,
I am doing IDOC-XI-FILE scenario.
I am facing one problem related to File Content Coversion.My requirement was to generate a dynamic file like <b>%store_code%_%current_date%_sitemaster.xml</b> , I have completed the dynamic generation successfully .
Now there is slight change in the requirement ,<b>we have to suppress the current_date node of the xml content</b> . i have tried to suppress the current_date using these <b>DATE.fieldFixedLengths 0 , Date.fixedLengthTooShortHandling Cut</b> , But I am unable to suppress it Can some body provide me the details on this .
The output xml version generated by Reciever file adapter is as below :
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
- <SITE_DATA>
<STORE_CODE>N002</STORE_CODE>
<TITLE_MEDI>Company</TITLE_MEDI>
<STORE_NAME>Mount Road</STORE_NAME>
<STREET>Chennai</STREET>
<COUNTRY>IN</COUNTRY>
<SALES_TAX_NO>12345678910</SALES_TAX_NO>
</SITE_DATA>
</ns0:MT_SITE_MASTER>
Plz provide me the code I have to write in the file content conversion .
Thanks in advance
Regards
PrabhatIf u see my earlier reply, I mentioned that u can not suppress the field from the one node.i.e Form SITE_DATA data type u can not suppress the field called CURRENT_DATE.
My suggestion is that , modify the Data type in such a way that you will be having two nodes as I have mentioned earlier. Then use the Suppress Logic for the Current Date.
So it will look like this-
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
- <SITE_DATA>
<STORE_CODE>N002</STORE_CODE>
<TITLE_MEDI>Company</TITLE_MEDI>
<STORE_NAME>Mount Road</STORE_NAME>
<STREET>Chennai</STREET>
<COUNTRY>IN</COUNTRY>
<SALES_TAX_NO>12345678910</SALES_TAX_NO>
</SITE_DATA>
<CURR_DATE>
<CURRENT_DATE>20051105</CURRENT_DATE>
</CURR_DATE>
</ns0:MT_SITE_MASTER>
So ur SITE_DATA is not having a field called CURRENT_DATE. This field is in separate node (segment ) called CURR_DATE. Now u can use the Suppress Logic for the same like this.
CURR_DATE.fieldFixedLengths - 0
CURR_DATE.fixedLengthTooShortHanling - Cut
And in your Variable Substitution you can use the date from the other segment called CURR_DATE.
Hope this solves ur problem.
Regards,
Moorthy -
Content Server problem after 5.0.2 upgrade
Hi,
We've just upgraded our staging environment from 5.0.1 to 5.0.2 and have lost all branding. The diagnostic script reports the following error:
==========
Community Branding Image Publishing Target : FAIL Settings
Community Branding Image Publish File Location: file://localhost/C:/ProgramFiles/plumtree/ptimages/imageserver/plumtree/portal/templates
Community Branding Image Publish Browser Location: http://<SERVERNAME>/imageserver/plumtree/portal/templates
Community Image FTP User Name:
Community Image FTP Password:
Possible Resolution
The file could not be found at the browser locationEnsure the community branding settings in content.properties are correct. The file location and browser location must be valid paths.
Error Details
Exception Message: Connect Failed. HTTP response code: 404
======================
I tried resolving both the file location and the http address from within the Content Server box and was able to without problem so I know it's not these it can't see.
I checked the pcs.log and the following error is reported:
======================
com.plumtree.openfoundation.io.XPFileNotFoundException: jscomponent file for jscontrols not found or failed to load.Exceptions encountered: - com.plumtree.openfoundation.io.XPFileNotFoundException: Failed to receive response from http://<PUBLICURL>/imageserver/plumtree/common/private/js/jscontrols/jscomponent.xmlin the alloted time (10000ms).======================
It appears that the Content Server is trying to access this xml file via the public url for the image server which, due to firewall configurations in this environment, it won't be able to do. I'd like to be able to change how it looks for this file to be http://<SERVERNAME>/imageserver rather than http://<PUBLICURL>/imageserver
Where is it getting this from for me to change it?
Thanks in advance for your advice, hope my problem description makes sense :-)
AnitaHi Diane,
No, we haven't fully resolved this yet. In addition to the issue listed we've come across a number of others that look like problems from install. We've reached the point where it's looking more effective to try and uninstall Content Server and do a clean install from scratch rather than debug every little thing.
As part of the new install we're changing the architecture to create an internal ImageServer on the CS server and then use a scheduled task to push everything out to the external ImageServer on the portal box overnight. This should get around a number of the firewall and dns issues currently making communication between the two quite difficult.
We recently installed another 5.0.2 portal in a different environment and have had none of the same issues with it so we're a little perplexed. When we get this resolved I'll be happy to write a note about what it was. In the meantime if you get anywhere with yours please let us know.
cheers
Anita -
Receiver File Adapter Content Conversion Problem.
Hi All,
I am getting in receiver file adapter due to content conversion setting. Problem is that all the fields coming in file adapter are optional. In content conversion , i have specified fieldfixedlengths. So whenever any optional field is not present , it fails . How should we handle it? is there any option to declare fields as optional, I know that is the there for sender adapter. But no. of fields is also very large, so putting each and every field as optional is very time consuming.
What should i do?
Ranjeet Singh.Hi Daniele,
Instead of using the standard funciton , i created a UDF for handling this situation.
My logic is UDF is like
//write your code here
int Size = Integer.parseInt(Truncate_Size);
String Return_Value = "";
if (!("".equals(Input)) )
if (Input.length() > Size )
Return_Value = Input.substring(0,Size);
else
Return_Value = Input.substring(0, Input.length());
else
for(int i = 0; i< Size ; i++)
Return_Value = Return_Value + " " ;
return Return_Value;
SO in this case also , it should be able to handle empy source element. But it is not working. -
Hi gurus
I sem to have a really silly problem
I'm only getting the FIRST field on file content conversion and no new line
here's a part of the XML file from the payload manifest
<?xml version="1.0" encoding="UTF-8" ?>
- <rfc:Z_XI_005_RFC xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
- <IP_CUSTOMER_HEADER>
- <item>
<CUSTOMERID>100853</CUSTOMERID>
<COMPANY>Bram Van Tuyl Coldstore</COMPANY>
<SHORT_NAME>VAN TUYL</SHORT_NAME>
<SALES_REGION>EUROP</SALES_REGION>
</item>
</IP_CUSTOMER_HEADER>
</rfc:Z_XI_005_RFC>
I've defined the following parameters in the content conversion
Recordset sructure item
content conversion parameters
item.fieldSeparator ; (a semi colon)
item.endSeparator 'nl'
if I look in my file all i get is
100853
where's the rest of the data ????
When I don't use content conversion xml file is generated correctly.
Any ideas
I am at 100% loss to see what's wrong here as this should be an EASY automatic conversion.
(the input structure is all character)..
Max pts to anyone who solves this
Cheers
jimbothe file is identical
payload from inbound message
for example
<rfc:Z_XI_005_RFC xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
- <IP_CUSTOMER_HEADER>
- <item>
<CUSTOMERID>1000001</CUSTOMERID>
<COMPANY>One-time ship-to</COMPANY>
<SHORT_NAME>ONE-TIME</SHORT_NAME>
<STREET />
<STREET2 /> .......
Paylioad under Receiver Grouping
<rfc:Z_XI_005_RFC xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
- <IP_CUSTOMER_HEADER>
- <item>
<CUSTOMERID>1000001</CUSTOMERID>
<COMPANY>One-time ship-to</COMPANY>
<SHORT_NAME>ONE-TIME</SHORT_NAME>
<STREET />
<STREET2 />
etc
text file 100001;1000001........ etc
There's no Payload that I can see under the response (checkered flag) where it says processed successfully.
cheers
jimbo -
Inline type of Content-Disposition problem in IE
Hi,
In a project, we need post some information from applet to servlet. The servlet will send some files back. We like the files shown on browsers. So we set the header in servlet as
response.setHeader("Content-Disposition",
"inline;filename=\"" + fileName + "\"");
We use JSobject in applet to call form from a html file to post the information to servlet, target of the form is set as "_blank", which suppose will open a new browser and show the file. For example if the file is a word file, the IE will show the file inside browser.
However, if two files need to be shown, only the first file is shown, the other browser is blank, and when you kill the blank window, the other will turn to blank window too. We test other types of file, xls files have similar problem, the PDF files work OK. Two things can fix the problem, one is set the form method to ��get��, the other is changing the header from ��inline�� to ��attachment��. But we can't use any of them under the project requirement. Has anyone experienced such wield behavior and know the reason? Is this the bug of IE?
Thanks in advance!Here are a little more about the file types.
The files we test have problems are msword or excel files, I think all MS office type files have the problem. Same problem even you mix them, for example one word file and one excel give you the same problem as two word files.
However there is no problem if I view several PDF files. If we mix the word file with pdf file. If the first file to view is PDF, then it works OK. Otherwise same problem.
The browser we are testing IE 6.0 with SP1.
Maybe you are looking for
-
Firefox will not load and I cannot download a new Firefox because it says I have to close the existing one. I cannot find the existing one open anywhere. Also, when I went to download I got a warning that the new Firefox might damage my computer.
-
I can send but not receive email using Mail and Comcast
My incoming mail [Mac Mail 3.6(936) ] slowed and now has stopped. I get error message "mail.comcast.net" on port 995 timed out. I can send. I can receive at Comcast.net. I have tried changing the port setting to 101 and no SSL and 587 (the comcast on
-
When I open more than one tab with ikls.ru web site - safari freeze immediately.
I have a Lion OS and all updates. When I open more than one tab with ikls.ru web site - safari are freezing immediately.
-
Oracle 8i/9i on Solaris x86[Intel]...
Hello All, I would like to know if Oracle 8i or 9i is available for Solaris Intel [x86] version. Its there for the SPARC platform. It would be nice if anyone could let me know about this. I need it to practise for my OCA/OCP exams.... Thanking you'll
-
Can I call a selection-screen that is in another function group?
I am writing a function module in function group ZFG_A. There exists a Dypro 9001 that exists in function group ZFG_B. How can I call the dynpro 9001 from my function in ZFG_A? This is not OO so I am not sure how to qualify the 9001? Such as ZFG_B=>