Dir 11.5 cross platform anomaly - Mac projector goes dormant after visiting a website

Hello,
I'm working out the last of the kinks in a cross platform projector built in a Windows environment using Director 11.5.
I've encountered one kink that I can't seem to eliminate.
One of the functions of the projector allows users to visit various websites through Buddy API's OpenURL command. It works perfectly in the Windows domain, and it almost works perfectly in the Mac domain except...
When you close the website and return to the projector on a Mac the projector seems to be dormant in that buttons wont highlight. However if you click anywhere in the stage the projector comes back to life and all is good again.
Has anyone else encountered this and if so how did you resolve it?
TIA!
Karl
Tallahassee, FL

Yep, animate in the background is enabled.
The projector works perfectly in the Windows realm and except for this one anomaly it works in the Mac realm.
Keep the thoughts coming!

Similar Messages

WORD Cross Platform PC/MAC

I opened a MAC Word document (created on MAC Word 2003 on a floppy diskette ), on a PC loaded with WORD 2007. I saved it (erroneously) on the PC 2007 (should have saved as). When I tried to open the diskette on MAC Word 2003 I got an error message; ". . . disk contains no volumes that MAC OS X can read. . . ." I realized my error and returned to the PC and got different error message: "folder 'A\' isn't available. The folder may be located in an unavailable location, protected with a password, or the file name contains a / or \." One suggestion is the MAC WORD 2003 put something on the diskette when it couldn't open it. A Genius at the new Apple store in Boston had no idea how to open the diskette. He said wrongfully that the external floppy disk drive was no good. He was wrong. I think either a PC or a MAC WORD version should be able to open it. I've been able to move freely from one to the other for years. I know WORD is a MS product. I posted this problem on MACTOPIA and got no replies. Is there a separate problem of corruption of the diskette? Anyone have any ideas how to open it? On one occasion when I just booted up the MAC, the diskette opened. But instead of working with it immediately, I closed it (thinking the problem was resolved miraculously) and haven't been able to open it since.

Thanks for the advice etresoft. I have a flash drive, memory stick as you call it. The diskette was damaged by the save in a higher level WORD on a PC. It was created on a MAC at a lower level. When I tried to open it on my MAC, OS apparently put something on the diskette preventing the higher level WORD from opening it on a PC where it was saved. I'm shopping for a new MAC presently. I have many documents and stills on floppies to upload. It is not time effective to copy onto Cds or DVDs and then upload. I have lots of VHS tapes as well I am digitizing and uploading. Looking for a WORD level on PC or MAC to open the diskette to get the other documents if not the damaged one.

Cross Platform (win/mac) iPod Communication

Hello. I currently use an iBook G4 to update my ipod. However, sometimes I like to listen to music over my girlfriend's house (she is caring for my cat at the moment). She has a computer with Windows XP. Ideally, I would like to plug my iPod Video into her computer so I can listen to my music while at her place. However, I am unable to do that without formatting my iPod (thus erasing everything on it). I tried setting up my iPod to a FAT32 system (Windows) because I heard that it would still work on my iBook. As soon as I plugged the iPod back to my iBook, however, it asked to be formatted again. Is there any possible way to make my iPod readable by both and writable by my mac? Thank you in advance.

I reformatted the iPod on my girlfriend's computer, then when I received the message to format my iPod (when plugged into my Mac), I got bold and hit "cancel" instead of "Restore."
What do you know? I can now use my iPod on both her computer and mine (for writing and reading). I set up my iPod to manually update so I wouldn't have my library replaced.
Thank you for the help.

How to make cross platform screensavers

I work on an Imac on os X. I need to make screensavers for
cross platform (win/mac) distribution. I have flash 8 pro. Is there
any viable solution cheaper than the $200 for "Iscreensaver" or
$300 for "screentime" softwares? Failing that, does anyone have a
preference between the two? do you know if they allow flash
interactivity or just animation?
thanks in advance
Bob

chakradude wrote:
> I work on an Imac on os X. I need to make screensavers
for cross platform
> (win/mac) distribution. I have flash 8 pro. Is there any
viable solution
> cheaper than the $200 for "Iscreensaver" or $300 for
"screentime" softwares?
> Failing that, does anyone have a preference between the
two? do you know if
> they allow flash interactivity or just animation?
Unfortunately there is no choices for you when comes to MAC.
Windows has over
30 really good screensaver tools, some of which very capable
and totally free.
Myself do not use Mac but friends who do, use the
"screentime" as preferred tool.
Check the features, see what you need and which tools deliver
what you looking
for than pick the winner :)
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

My mac keeps turning black after 15 seconds

I have trouble even getting this questions in. my Mac keeps going black after 15 seconds. then I hit the key and it comes back .I need help!

What version of the Mac OS are you running?

Help! Cross Platform Projector issue

Hi all,
I am sure this has been a hot topic for years and I did do
various searches and was surprised not to find anything on it
quickly. Sorry if this has been discussed a lot, as I imagine it
has. We are able to make our functioning mac and win projector with
our win version of flash 8, but everytime I burn the cd on win, the
projector file does not know what to do with itself when trying to
launch back on mac.
Questions:
1. Does cross platform burning have to be performed on a Mac?
2. If so, does one need toast to do the cross platform
burning to make the mac and win projectors groovy on their
respective platforms? We have a brand new MacBook Pro - it seems
like it should have these capabilities built in at this point, but
not sure.
Any pointers here or to a technote would be much appreciated.
Thanks!
We

Read this
http://board.flashkit.com/board/showthread.php?s=ffa1834a93ea5d8f5c4c8f9e97f34191&threadid =500326
Regards
FlashJester Support Team
e. - [email protected]
w. -
http://www.flashjester.com
There is a very fine line between "hobby" and
"mental illness."

Cross platform CS on PC to CS3 on Mac does not work like video says

Your video on cross platform workflow states that you can import older Premier CS files on a PC into CS3 on a Mac. I tried this and get the message, "this project was saved in a aversion prior to Adobe Premiere Pro CS3 and cannot be opened on a Mac. Please refer to the User Guide for import options." I guess I have to assume then that the video, www.adobe.com/go/vid0236, is wrong about this? Can someone please explain how I can salvage the work I did 3 years ago on Premiere Pro 1 on a PC when I am now exclusively working on the Mac in CS3?
Thank you.

Ty,
This has come up a few times and the solution is to find a PC CS3 user, who will Open the Project and then Save it in CS3-CS4 for you. I does mean that you'll have to befriend a PC-person, but who knows, maybe you can reciprocate later on. In each previous instance, this workflow, PC to PC to Mac worked perfectly. Note: the same holds for Encore Projects, and there is some PC to PC incompatibilities between very early versions and later versions. I had to Open and Save an Enocre 1.0 Project in CS2, so a CS4 (only) user could then Open in CS4. This stuff happens, and the skip in Mac porting can play a role in it. If I had CS3 on my PC's, I'd do it for you, but CS2 will not hlep you.
I believe that P 6.5 was the last previous version ported for the Mac, until CS3.
Good luck,
Hunt

Which product to purchase (cross platform necessary from Mac to PC) Adobe Photoshop 6.0.x to ???

I have ancient Mac photoshop and pagemaker files. i need best cross platform product for windows that can access these files. adobe photoshop is my primary concern. I understand the indesign cs2 will import old school mac photoshop 6.0.x but is not compatible with windows 7 ... thank you.
In particular we use windows 7 x64
So in summary, need to determine which Windows 7 x64 version of Indesign CSxx will still open archaic Mac Adobe files (layouts, EPS, etc). Or is there a similar product that must be obtained. I prefer to stick to Adobe products, however, if I must go elsewhere and you can help -- please advise.
Also, if you know what I should obtain, does this product have a trial download option that I can test functionality before purchase? Warranty when I do buy information -- and return policy in general?
Many thanks.

PM support has long been pulled from InDesign. You are going to need some old version like CS or CS2 and save an intermediate step to ID files. PS is not a probelm at all. All programs have 30day trials and Adobe has a general 14day return policy. Refer to the product pages on teh website.
Mylenium

PDF with special characters (é, ñ) needs to be legible cross-platform(mac & pc)

I am using Illustrator to design a PDF. Because it's in Spanish, accent marks and other special characters are needed (á, ñ).
When I export the PDF from the ai file and view it on my mac it looks fine. However, when I open it on a pc some of the special characters are completely missing.
I tried Creating Outlines with the text, although it will make it harder to update in the future and so less preferable to leaving the text editable. Creating Outlines works fine on the mac, however on the pc the L's appear thicker than they actually are.
Does anyone know how to make special characters legible cross-platform when creating a PDF using Illustrator?
Thanks!!

Does anyone know how to make special characters legible cross-platform when creating a PDF using Illustrator?
Yes. You use a correct OpenType font that has the glyphs in the place where they belong and can be embedded without limitations. Older TrueType or PostScript fonts are simply unsuitable as are fonts that cannot be emebdded and require to be installed locally. It all comes down to system language settings vs. the unified environment inside acrobat. This also requires any PDF to be created on systems with the language settings correct in the first place, i.e. creating Spanish text with a Japanese version of AI would be pretty desastrous due to how foreign language fonts are accessed... check these things and then try again. If possible, enforce embedding of the full font in the PDF settings, not just a subset and choose a suitable font.
Mylenium

Can you cross platforms on the 4S? My itunes is on MAC, all other info is on PC

Can you cross platforms on the 4S? My itunes is on MAC, all other info is on PC

Yes, you can sync iTunes content with one computer, & contacts & calendars with another computer.

New Projector Exporter for Flash Pro CC (cross platform)

Hi All,
We have a new cross platform Projector Exporter for Flash Pro CC available as an extension at the below location:
[http://nipunasthana.wordpress.com/projectorforflashcc/]
Thanks,
Nipun Asthana
Flash Professional Team

Projector Exporter has now officially been included with the new Flash Pro CC 2014 release!

Cross platform DVD burning - Mac/PC/home DVD player

All right, Geniuses, re: cross platform DVD burning, I have read and read and spoken to many people. Out of 6 1/2 billion people, NOBODY can answer this question. Shane Ross probably can't answer it with a straight face.
How, where, why, when, what do I use to burn a DVD - who knows, maybe up to 90 minutes - so that I can play the same DVD on my Mac, your DVD home player, your boss's PC, whether it's Real Player, Windows Media Player, QT, mmrphmm-mmrphmm, or quakiifrafermessendt (w/chrome) format.
I am running Mac G5, dual proc. 2Gig, 3.5 G. RAM, OS 10.3.9, Final Cut Pro HD 4.5 which includes FCP, Compressor Live Type, DVD Studio Pro 3, Cinema Tools.
The editing part is a cinch. Even with my eyes open. I've used Mac since 1978 and shoot broadcast. Oddly, dropped frames, A/V synch, phase shifting, etc are no problems.
Also, I have about 300 shows that I did on VHS, 3/4", Betacam, and DV. I have an A to D converter that works great converting these tapes to digital which I store on my hard drive. What I need to do, let me back up... about a year ago I had to buy a PC because Mac doesn't support Solid Works 3D program. So, there, I said it, I own a PC. And that's why I have a problem. Or more accurately, a quandry. Rather than tie up my Mac, I might as well use the PC to record my videos to, then burn to DVD, then to edit them or run them through DVD Studio Pro on my Mac for authoring, then back to my first problem, How, where, why, when, what do I use to burn a DVD - who knows, maybe up 90 minutes - so that I can play the same DVD on my Mac, your DVD home player, your boss's PC, whether it's Real Player, Windows Media Player, QT, mmrphmm-mmrphmm, or quakiifrafermessendt (w/ultrascuzzyectoplacticdefoid) format.
Of course, I want highest quality. Absolutely, my finished DVDs have to play on PC, Mac and home DVD players. If you've gone this far, someday I might need to put some of this on the web. I like options. It might be delivered as a stream, or a download. Another compression question?
Simple, huh? Is there anything else you need to know? Should I fire up my old wire recorder, or are you going to suggest another 3rd party peripheral? Which would make me wonder, why hasn't Apple addressed this obvious disfunction.
BTW/ I have found Memorex DVDs work best on my system. Any comments?
Regards.

Welcome to the forum!
Time for a reality check: burned DVDs (and even stamped DVDs) are NOT 100% compatible with all DVD-Video reading devices. Period. It just the Nature of the technology and that fact that player and drive manufacturers rush products to market that are not fully in compliance with the DVD-Video standard.
That said, I've had only two individual playback compatibility complaints in the last 6 years with well over 2000 DVD-R discs authored in DVD-SP and burned from my Macs on an external Sony DVD burner. Those two complaints were rectified by burning a DVD+R disc for the clients.
Things I have learned:
· Windows Media Player doesn't play nice with DVD-Video. ULead and other DVD players for the Windows platform do work very well (I have to WinXP systems to test on). PC playback compatibility is dependent on many, many things; the user's video card, RAM, drive type (and condition), processor speed ... the list goes on and on. It's impossible to predict if ANY disc will work in any given PC.
· Memorex is at the very bottom of the list for quality media. Don't get me wrong; they do have a wonderful warranty. If you send back any discs they will replace them with equally poor quality media at no charge. Memorex is simply a marketer - there's no telling what brand or quality of media you're actually getting when you purchase their brand ... but you can be assured it will be cheap.
That said; I'll agree that your workflow seems a bit backward. Authoring to DVD and then editing? Makes no sense. You're losing quite a bit of quality in that process as well as adding unneeded steps. If you must capture the footage with a Windows system and it needs editing, capture then convert to a QT codec that matches your FCP Sequence settings so when you move the files to your Mac for editing, everything actually plays nice.
If your program doesn't need editing and you just want to transfer it to tape, I'd recommend using a stand-alone DVD recorder so you don't have to tie up either computer.
-DH

Cross platform upgrade question between Photoshop CS5/CS6 and multiple Windows/Mac computers

Hello,
I'm currently using a Windows laptop and PC running Photoshop CS5 from a Student license I got in college. I am considering moving to an Apple laptop so I was looking at the cross platform update question on the forum that led me here: Order product | Platform, language swap
It's not really clear if I will be eligible for the upgrade, and Adobe support chat sent me to the forum, and that page sends me back to where I started to see if I am eligible. I would prefer to purchase the upgrade outright, rather than pay for the new monthly subscription model.
If I am eligible for a swap/upgrade to Apple CS6, will I still be able to use CS5 on my Windows PC?
Thanks.

I don't have a definitive answer, but I have a feeling that a student teacher version is not eligible for an upgrade discount. You own the CS5 perpetual license, and can install it on two computers at the same time as CS6, CC etc. That will be the case in perpetuity. (not sure why I didn't just type 'forever' back there, or alert the cliche police 'Going forward')
Photoshop CS6 Extended will cost you just shy of US$1600 according to this Amazon page The non extended version does not give you the 3D tools, and Photoshop CC comes as the full extended version as standard. If you got the Photoshop / Lightroom Photography plan at a mere $10 a month, the price of CS6 would keep you subscribed for > three years. Photoshop CC has a lot of wonderful features CS6 does not have, and will never have, and CC will be be constantly updated 'in perpetuity'. ;-) $10 a month! Heck, what's not to like about that?!!!

Re: Java Media Framework cross platform installation / setup on Mac / UNIX

JMF cross-platform doesn't support everything that the native performance pack versions support. I found this out the hard way too because pure Java JMF can't play AVI's from my digital camera but the Win32 enhanced JMF can. In particular, with my case pure Java JMF doesn't support all the frame rates that the others do.
I know Apple has been releasing some of the other APIs lately, like JAI. We might want to check over at apple.com and see if they have a native JMF impl.

Hi,
JMF work well on OS(32bits) and Java(32bits)
Octavian.
Edited by: user7659448 on Feb 28, 2012 10:42 AM

Cross-platform baOpenFile

I have an application with hundreds of small movies so i need to put them into a folder (called dswmedia) and an .exe and macintosh app to launch the application, outside the folder.
I'm using MX2004 and working on a PC XP2 to develop my app.
I have been trying to use baOpenFile to go from the .exe or .osx to a .dcr inside the dswmedia folder.
It works easily on the PC, but when I try on the Mac I get the error message "The application Projector quit unexpectedly."
I have checked every line of code and am sure the error doesn't happen until it comes to the line baOpenFile. I've checked the path on the Mac and it is correct.
I have tried opening another projector instead of the .dcr file, but it still quits unexpectedly. I have also tried a pdf document but it quit.
Can someone please tell me what I have to do to get it to work on the Mac?
any suggestion will be very welcome.
Carmel

thanks so much Sean ... such a simple answer!
now it is almost working!!!, but it has a different problem, related to the cross-platform path for external script,
for some reason, when I open my app on the mac it is looking for the external script linked to the first movie, and is asking for it using a pc path.
so I will open a new discussion.

Dir 11.5 cross platform anomaly - Mac projector goes dormant after visiting a website

Similar Messages

Maybe you are looking for