"dir.mnu warning" after editing the function palette

Hello everybody!
I´ve got a small problem, which is getting on my nerves! I created a new subfolder with vi´s in the function-palette (with the advanced palette tool)... after all i deleted it, because now i use other vi´s. So the problem is everytime i open a vi of my project which has something to do with the "signal processing palette", i got this warning that the "dir.mnu" has changed.
So far i created a new project, but the problem is still there... How can i restore the default palette settings? Can i delete the false dependencies? Or are there global files i can delete and then labview uses the default palette?
Thanks,
Michael
Attachments:
warning.JPG ‏28 KB

I think when i installed Labview, there was a symbol for every VI in the function-palette. Could it be that i somehow have overwitten the defaults in the ...\National Instruments\LabVIEW 2009\menus folder? So thats why the "restore defaults" button is grayed out, because these ARE the default values. Is it possible to get the "dir.mnu" for the signal processing subpalette (...\National Instruments\LabVIEW 2009\menus\Categories\Signal Processing\dir.mnu) of somebody?... Reinstalltation is al little more complicated, because the DVDs are at our computer administrative department.
So, thanks for your help....
Michael
Attachments:
palette.JPG ‏37 KB

Similar Messages

  • Where in the function palette can i find the "logical shift" function (shift x by y bits)?

    i am not able to find the "logical shift" function anywhere on the functions palette (after searching EVERY where). however, i discovered the function elsewhere in another VI (by pure luck!). i could keep bringing up these VI and copying and pasting, but that's a pain...i'd like to just have it on my functions palette to begin with.
    i am running labview 6.1 thanks for your help.

    hi,
    LabVIEW's functions pallete has come with a very useful tool --> "Search" tool
    Make use of the "Search" tool should you encounter difficulty in locating the desired function. For instants, search for keyword "Logical" or "Shift" and you will be able to locate the function
    happy coding
    Ian F
    Since LabVIEW 5.1... 7.1.1... 2009, 2010
    依恩与LabVIEW
    LVVILIB.blogspot.com

  • I have created a form in InDesign, exported to a pdf, created an editable form and saved.  When I open the form and make changes and save, the reopen the changes are there.  If try to email this form as an attachment after editing, the attachment is alway

    I have created a form in InDesign, exported to a pdf, then created an editable form and saved.  When I open the form and make changes and save, then reopen the changes are there.  If try to email this form as an attachment after editing, the attachment is always minus the edits.   ????

    Hi chuck,
    If you ave created the form and then filling it yourself and saving the form, the filled data should be there when you reopen the same form.
    Can you please send the form to me at [email protected]  so that I can have a look.
    Regards,
    Rave

  • Populating the Signal Express Category on the Functions Palette

    Hi
    Can anybody help with advice on how to populate the signal express category on the block diagram Functions palette ?
    Thanks
    Solved!
    Go to Solution.
    Attachments:
    LV Functions Palette.PNG ‏14 KB

    Hi Ewan,
    Uninstalling and reinstalling in the right order would ensure that everything was properly associated. However, I don't think that should be necessary yet in your situation. Please go to Control Panel > Programs and Features > National Instruments Software to see the full list of National Instruments software you have installed. From here you should be able to select any individual installation from the list and select "Repair". Instead of just seeing that something is already installed and exiting, this should go through the installation and check for corruption. As well, this should add the correct associations if they were currently missed due to the order of installation. 
    Please try running a repair of SignalExpress 2013 and restarting your computer, then check to see if the functions palette in LabVIEW is fully populated.
    Thanks!
    Emily C
    Applications Engineer
    National Instruments

  • Error in saving .aspx pages after editing the XSLT

    Hi,
    I am developing a SharePoint 2010 web app and I had to do some modifications for a .aspx page which has a data form web part and I am encountering following issues:
    1. After selecting the web part, when trying to modify the filter criteria of the data source, the "group" and "ungroup" buttons are seen as disabled and the option of editing in the XSLT editor is also not visible.
    2. after editing the XSLT, knowing that there are no issues if I try to save it an is showed saying null value issue and asking whether to allow scripts to run in this page r not. After choosing either yes or no, when I try to preview it in browser I get
    an error in the place where I have the data form web part saying error with web part try to edit it in SharePoint editor such as SharePoint designer.
    3. this is happening only i try to edit the code but no matter how many copies I get from the original page, they are correctly previewed in the browser unless I try to edit it.
    your kind support or suggestions are highly appreciated as I am unable to fix this
    thanks.

    Data you are changing is on the frontend. You need to pass data to backend (server). The static method 'dispatch' of control framework class (CL_GUI_CFW) is used to do this 'manual' synchronization. It is sort of helper method of control framework (which is basis for ALV controls) and is independent of ALV controls (cl_gui_alv_grid etc.) that are used.
    Try putting this code as suggested and check.
    short code would be (without error handling)
    CL_GUI_CFW=>DISPATCH( ).
    null

  • "in port" and "out port" VIs are not in the functions palette!

    Hi,
    I am using LabVIEW 2012 on a Win 7 64 bit. I want to read a digital input (3.5V) using PC parallel port. I also read this white paper:
    http://digital.ni.com/public.nsf/allkb/B937AC4D8664E37886257206000551CB
    I searched all the functions palette for “in port” and “out port” VIs but I could not find them. Apparently they are not supported in 64bit OS. What are my alternatives for reading digital input via PC parallel port?
    Thanks.

    They have not been supported for quite some time. What happens when you use the recommended VISA api?

  • Vision Acquisition Software installed, BUT why is the IMAQdx missing from the function palette?

    I just installed to the labview 2011, and many other modules and softwares including this VASAugust2010. But the IMAQdx is missing from the function palette (vision and motion). However the NI-IMAQ 4.5, IN-IMAQ IO 2.4.0 and NI-IMAQdx 3.7 are all clearly listed as installed in the NI software (contorl panel -> program - NI). In MAX, my usb webcam is also listed as NI-IMAQdx Devices and works well under MAX. But my own program is broken because the LV can't find those functions. So why the IMAQdx funtion is missing and how to fix it?  
    Thanks,
    Lei

    hi tommy
    check this may helps you http://digital.ni.com/public.nsf/allkb/A451D3CCBB740716862578FC004DB392
    Sasi.
    Certified LabVIEW Associate Developer
    If you can DREAM it, You can DO it - Walt Disney

  • Why i can not see the biomedical palette on the function palette when i run biomedical startup kit 8.5 on labview 8.6

    Hi. I am trying to install biomedical tools on my labview 8.6. when i run the biomedical startup kit 8.5, it installs correctly, but when i go to see if the biomedical palette exsists on the function palette i dont see it.
    can somebody help. 

    Howdy Boulos,
    I looked into this issue a little and found that you have also emailed into support.  I'm going to work with the engineer assigned to that request, but you can expect your primary source of information to come through email.
    The quick answer to your question is that the Biomedical Startup Kit you downloaded is for LabVIEW 8.5, while you have LabVIEW 8.6 installed. I'm checking to see if there is a way to port the VIs over manually into the LabVIEW 8.6 palette, but I'm not confident this will work at this point.  
    We will let you know through email what we find out, but the official answer at this point is that the program you've installed is not supported under LabVIEW 8.6.  Thanks, we'll keep you updated.  
    Sincerely,
    Chris G in AE

  • EXIT not found in the function palette!

    Some thing wiered problem am facing. Am having a large application in that I have a main VI and a llb file that I am calling dynamically from a folder. When I right click the block diagram in the main vi an seeing the EXIT function in the function palette but when I do the same thing in the library file its missing. Please check the attached image and please let me know what might be the reason for this.
    Thanks
    The best solution is the one you find it by yourself

    I have not achieved to reproduce this. Can you post the VI which is affected?
    Is it also affected if you copy it outside the LLB?
    Norbert
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • Create generic component to handle errors after using the function modules

    Hi,
    Please provide steps to create a generic component to handle the BAPI Return structure meesages after the function calls..
    Please let me know how to pass the structure or internal table from one component to other.
    Thanks in Advance,
    SV
    Moderator Message: No Step-by-steps will be provided here. Either take a classroom course or search for SAP Documentation
    Edited by: kishan P on Dec 10, 2010 3:14 PM

    Hi Hari,
    Plz give me ur mail id.. i will forward some documents regarding Generic Extraction using FM  and query...
    For function module means.. you have to  create function module. in RSAX..in R/3 side
    and you want to extract data using Query means...you have to create Infoset query in (SQ01,SQ02,SQO3) IN r/3 Side
      you can refer this blog also..
    to Function module "RSAX_BIW_GET_DATA_SIMPLE" and there is very good weblog . Search "generic extraction" for weblog. /people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
    thanks
    @jay

  • Problem occures after editing the JTable....

    Before understanding problem, let understand my logic first --
    I m writing code for 'find' functionality, which works exactly same as find (ctrl+f) in any document or table...
    - In my case I m applying it on JTable it follows the steps bellow .
    - Enter word to search in a GUI & click on find or find all
    Internal working as :---
    - take JTable instance..
    -pass it to function which detects the occurrence of 'search word' in a JTable cell.
    - save rows & columns no. of all occurrences in a vector
    - pass the vector to cell renderer, which ll high light the occurrences with blue color.
    - update table UI using "table.updateUI()".
    Now my problem is :--
    The code works fine & doesn't gives any problem until I do not edit the cell of JTable displayed on screen...
    If I edit the cell & then try to search a particular word in the table then it ll not work properly & shows message "Word not found".(Which actually displayed if the word count is zero in the table).
    Code is too large so I am not pasting here....
    Any suggestion or clue will be appreciated....
    Thank you very much in advance
    Suyog

    Code is too large so I am not pasting here....If you need further help then you need to create a [Short, Self Contained, Compilable and Executable, Example Program (SSCCE)|http://homepage1.nifty.com/algafield/sscce.html]
    that demonstrates the incorrect behavior, because I can't guess exactly what you are doing based on the information provided.
    Don't forget to use the [Code Formatting Tags|http://forum.java.sun.com/help.jspa?sec=formatting] so the posted code retains its original formatting.

  • Exception after executing the function module

    HI,
    I have called a function module and how can i know that an exception has raised.

    Don't forget you'll need to map each of the exceptions to a numver for sy-subrc to have any meaning.
    E.g.
    CALL FUNCTION example
      IMPORTING
         something = something
      EXCEPTIONS
         FAILED = 1
         ALMOST_WORKED = 2
         VERY_CLOSE = 3
    and so on.
    Regards,
    Nick

  • Songs out of order even after editing the info

    Hello,
    Just recently out of the blue I noticed that some of the songs in my library were not in the correct order as they appear on the album. I went under "Get Info" to make sure that the track listing was correct (i.e. Track 2 of 10) and everything was correct, yet it still showed up in the wrong order. I even re-typed everything hoping it would reset but it did not. Any ideas why this would be happening? It appears to be only on albums that I purchased through iTunes (and yes, each song was purchased at the same time). Any help would be appreciated!

    You're sure you're displaying by album and not by artist or some such?

  • Has anyone experienced photos disappearing after editing the date?  Lion, Imac, Iphoto '09.

    I am beginning the daunting process of sorting through all of my photos to make sure the date is correct.  I made a change on a couple of photos, they then disappeared, presumably to the correct date.  However, when scrolling to the spot it should have been relocated to, it is not there.  The missing photos are not critical to recover, but I want to make sure I have this resolved before continuing further.  Thanks!

    I do not understand - How did you change the date?
    If you are doing it correctly using only iPhoto then the photo will not change it location in the event it was in
    Please give more information
    LN

  • After editing the iisproxy.ini with a differnet IP address do I need to do anything else?

    I changed the iispoxy.ini file on MS ISS server to point to a new
    weblogig server ip address but I get a timeout error when trying
    to proxey to the new server.
    Do i need to do anything else to the server to make this connection
    work.

    Hi Joe,
    The encoded assets are imbedded inside your iDVD project package. When you updated your footage, did iDVD detect the asset change and ask you to update the project? If it didn't, it might not have re-encoded some of your DVD footage. You should preview your disk image with Apple DVD Player to be sure. The encoded assets can be deleted with the Advanced > Delete Encoded Assets menu command and save your project.

Maybe you are looking for