DIR through CV01n -not visible in easy DMS
Dear all,
1)I have created DIR through CV01n . But its not visible in public/private folder in the easy DMS. but when i do search the same DIR, it is visible in search folder.when i am trying to move same DIR to public folder or any folder system has given a pop-up and asks "do you want to like or copy this DIR " .
wht is that?
2) Is it possible to link the DIR directly to the folder at time of creation or uploading through browser or other method.
kindly help
Hi Harish,
regarding your questions I have to inform you that the reason for this is that the create document info record is not inlcuded in the document BOM (e.g. header EDIPUBLICFOLDER). So you would have to add the new DIR to the document structure first.
If you create a new document directly in EasyDMS then it will be automatically added to the related folder structure.
In the backend I think you can use the new document browser functionality in CV01N to create new documents which are also just added to a document BOM. Therefore please press the button 'Select Document via' in transaction CV01N and choose weither 'Browser' or 'Selection Screen and Browser'. In the context menu of the browser you will find to item 'Create'.
Best regards,
Christoph
Similar Messages
-
DIR, Folders not visible in Easy DMS
Hi All,
In Easy DMS 7, both public and private folders are visible but when I create any DIR or Folder within these public/private folders nothing is visible but in ECC its visible in document structure.
how to make this visible in Easy DMS?
Thank You,
ManojHello,
Pass the private or public document keys to BAPI_DOCUMENT_GETLATEST2 and check if docstructure and documentdata tables are filled correctly.
Regards
Surjit -
Dear All,
i ahave created new user ID I am able to create /search the document (DIR) in easy DMS but that document has not display in public folder.
why ?
Kindly help
rgdsHi,
If you have created the new Document over the normal Gui the document is not automatically shown in easyDMS. Are you using the same access rights for the new user as for the old user?
Regards
Thomas -
Enabled monitor through override not visible in custom management pack
Hello Everyone,
I've this requirement to enable a monitor which is disabled by default in its source sealed management pack. Using following article; via override; I enable the monitor and place it into a custom unsealed management pack.
https://technet.microsoft.com/en-au/library/hh212818.aspx
Now when I try creating subscription based on that monitor; and select the custom unsealed management pack; that monitor is not listed/available. However, this same monitor which is turned enabled by override; is listed; if its parent sealed management pack
is selected.
Questions:
1) Would selecting this monitor from its sealed management pack; safe to assume this monitor is now enabled?
2) Is this default behavior for monitors turned enabled via override?
Please provide input to this, how an enabled monitor through override can be referenced to be used? Thank you.1) If the override is done properly, yes, it is enabled. You can check that it is actually enabled by opening the health explorer of an object targeted by this monitor : it should be green/yellow/red instead of blank when it was disabled
2) It is the default behavior. What happens is that you store the override (just a parameter that says "ok, the monitor is now enabled") in the unsealed management pack, not a copy of the actual monitor. -
Newly created item through personalization not visible
Hi All,
I have added on new item , in a page,
Howerver when I clicked apply on that item , once I define the required properties of the item.
I am getting this error
"Attachment item "%ITEM" has been created successfully, however, it does not have an Entity Map associated with it. To avoid a runtime error, please either create an Entity Map for this attachment item, or delete attachment item "%ITEM"."
I am not able to locate that item , anywhere * either in personalzied page nor in application pageI have gone to personalize page -> selected LOVRN -> create item ->
level - Site
Item Type - MessageLOVInput
Prompt - some custom prompt
Id - some custom id
External LOV- given exisitng seeded path for LOV with region name in the last
apply .
Then the error appeared as
Attachment item "%ITEM" has been created successfully, however, it does not have an Entity Map associated with it. To avoid a runtime error, please either create an Entity Map for this attachment item, or delete attachment item "%ITEM". appeared
After the above steps complete. I have again gone to personalization ->complete view . But I am not able to locate the item created in above mentioned steps.
One thing to note, I have tried creating new item , however everytime I am getting the above error after clicking on apply. In one occasion I have given incomplete path in the external LOV field mentioned above.(i.e. I forgot to mention the region Name )
Please help.... -
Easy DMS - object linking DIRs
Hi,
I'm implementing Easy DMS currently running version v6.0 SP9. Everything is working well with SAP DMS except for one thing, object linking.
I've read other threads but no help.
My issue is I want to be able to show a DIRs relationship with other DIRs in the object links.
Easy DMS allows this to a certain extent but its useless because all it does is display the related DIRs for this DIR, you cant action anything to display these other DIRs, where as if you do the same thing in SAP DMS, you can actually get a link to the referenced DIRs and when you click on it, it will automatically navigate you to the related DIR.
Why doesn't this work in EASY, or is simply just there for show, which I find a waste of time to be honest if object links are simply for show. The same goes if I want to attach a DIR to a material same problem.
Thanks in advance
Kurthello Kurt,
to my knowledge,Navigation to a different dir which is attached as object link in easyDMS is not possible (like in SAP GUI).
regards,
anubhav -
DIR not visible from attached sap object and validation check problem
Hi Experts,
I have created new sap object link for table BUT000 and transaction code is BP.
Now
1) when I am creating DIR through CV01N, I am able to view Object link column with one filed called PARTNER.
If I enter wrong or Invalid partner here, system is not performing any validation, it accepts it and if I save DIR it gets saved with invalid business partner.
2) secondly lets say i have entered valid business partner and saved the DIR, then in transaction code BP, I am not able to view any DIR for that business partner.
Need your valuable Input on this.Hi Ravindra,
While adding the screen I had copy pasted logic from screen 1204 as per guidelines to add the screen.
One more thing added in guide line was, 'Please do not make any changes in it'.
I think this is the system check which is already there when we copy paste logic from 1204 but due to some reason it has got problem.
For the 2nd screen also I have given the same logic which is in 1204 screen of CV130.
But here the problem is when I double click on any Module or any perform it asks me to create.
That means this module and performs does not exist in function group CV140, they all exist in function group CV130.
I try creating the same modules in CV140 also but there are many variables, internal tables which does not exist in CV140.
Any help on this will be appreciated. -
Mass Loading of documents on Easy DMS
Hi SAP DMS
We need to load 17 000 documents on SAP Easy DMS, Is there a mass upload functionality that we can use and What is the maximum number of documents can we drag and drop if the mass upload functionality is not available on Easy DMS?
Thanks
CharityHi Phephile,
I used C++ for the solution you can see documentation in the following links:
[http://wiki.sdn.sap.com/wiki/display/PLM/EasyDMSPlugin%28Addin%29Development]
[http://wiki.sdn.sap.com/wiki/display/PLM/EasyDMSPlugin%28Addin%29-Advanced+Development] -
DIR no. not showing after creation of DIR from Easy DMS
Dear Friends,
I could able to create DIR from Easy DMS. But I could not able to see DIR no. after creation, so that I do not document created or not ? If created what is the no. I need to open thru search or other way.
Is it standard functionality.
Can we change this by any functioanl module or any BADI implementation?
Regards,
Sai KrishnaHi Sai
When you creating a DIR through Easy DMS it will ask you document type and description. In the same window as prasad mentioned 4th tab "Techinal Details" you can find the document number,document type, document part and document version. After creating the document it will create in the folder with all the remaining details with default layout.
e.g: Document Description | Status Description | Document Number | Type | Version | Part | User | Change Number ... other details.
Test | Create Document | 10000000304 | DOC | 00 | 000 |...etc
Please check the DIR while creating. Surely it will be available.
Thanks
Prasad -
Manual revision of DIR using Easy DMS
Hi gurus,
I am using Easy DMS 7.1 SP02. Document type in DMS have been set up using manual revision entries. All is working fine in the backend system when creating new version. The system allow you to enter a manual revision which could be eiter alpha numeric or only numeric or only alpha. My problem is that when creating a new version with Easy DMS, the system does not give me an option for a manual revision to be entered. Only error message.
Is there a specif Badi or user exit that is required to be implemented.Hi Sai
When you creating a DIR through Easy DMS it will ask you document type and description. In the same window as prasad mentioned 4th tab "Techinal Details" you can find the document number,document type, document part and document version. After creating the document it will create in the folder with all the remaining details with default layout.
e.g: Document Description | Status Description | Document Number | Type | Version | Part | User | Change Number ... other details.
Test | Create Document | 10000000304 | DOC | 00 | 000 |...etc
Please check the DIR while creating. Surely it will be available.
Thanks
Prasad -
Easy DMS 6.00 SP09 - can not logon
Hi Gurus,
I am testing Easy DMS SP09 (and SP09 Patch 1), but everytime I want to logon the logon screen disapeers for a few seconds and then appears again and wants me to logon again.
When I press the cancle button I get a msg box with "unkown error".
I can use SP08 and all former versions without this problem so i guess something changed in SP09.
Does anyone of you has the same problem?Hi,
did you uninstall SP08 before you install SP09 patch 1?
If not, please uninstall EasyDMS once again and then install SP09 patch 1 again.
Please try to reset the RFC Cache as well and test if this is usefull. You will find the Reset button in the settings menu of EasyDMS.
Best regards,
Christoph -
Printers not visible through RDC
Hi All,
This is not really an SDK or SAP related error but still wanted an opinion here. I am connecting to SAP server through remote desktop connection. the server has static IP to connect to. while connecting, I am sharing all my local drives, printers, ports for the session. I am able to see the the local drives. but when I open SAP and see any PDF or other document or PLD, my local printers are not visible in the list. any idea?
thanks,
BinitaHi Binita,
there are 2 posiblities.
1. The server doesn't allow local printers to be used
2. The driver for your local printer is not installed on the server.
You should check the windows system or application log to see any error messages
Regards
Ad -
Yes Verizon has contacted me by phone. I never scheduled a call time nor did I call them. They also are not making it easy to contact them through email. I need to discuss a way to assure that my phone is never called again during work hours without a prearranged meeting. I will not speak on the phone nor use a live chat. I want email as I want this documented offical and no other means offeres me that assurance. I'd also like to discuss comensation for being harrassed with phone calls.
Well if you pay your bill the calls would not happen.
You need only tell them not to call you during working time.
The Fair Debt Collections Practices Act states you must tell them it is not convenient.
Now if marketing calls you can opt out at the Verizon web portal under your My Verizon account.
You will not get compensation for them to call you. Nice try.
However they could just shut your phone off and then you will call them.
Email is not an option.
Good Luck -
Logs files are not visible through AS Server Console.
Hello,
Server = Solaris 10
Oracle AS 10.1.3.4 (clustered)
Logs are generated in "/apps/oracle/product/as1013/opmn/logs/EEW_DTP_EEW_DTP_1/EWII_DTP~EEW_DTP~EWII_DTP~1.log" but not visible in Oracle EM (AS console).
Applications in Instance: AS1013.oxdora20a
application type: OC4J
pid | name | state | rtid | classification | routable | parent
27711 | ascontrol | stopped | g_rt_id | external | false |
27711 | javasso | stopped | g_rt_id | internal | true |
27711 | datatags | started | g_rt_id | internal | true | default
27711 | default | started | g_rt_id | external | true | system
27711 | eew_dtp | started | g_rt_id | external | true | default
27711 | system | started | g_rt_id | external | true |
27710 | ascontrol | stopped | g_rt_id | external | false |
27710 | javasso | stopped | g_rt_id | internal | true |
27710 | datatags | started | g_rt_id | internal | true | default
27710 | default | started | g_rt_id | external | true | system
27710 | eew_tp | started | g_rt_id | external | true | default
27710 | system | started | g_rt_id | external | true |
27709 | system | started | g_rt_id | external | true |
27709 | default | started | g_rt_id | external | true | system
27709 | bc4j | started | g_rt_id | external | true |
27709 | ascontrol | started | g_rt_id | external | true | system
27709 | javasso | stopped | g_rt_id | internal | false |
Applications in Instance: AS1013.oxdora20b
application type: OC4J
pid | name | state | rtid | classification | routable | parent
831 | ascontrol | stopped | g_rt_id | external | false |
831 | javasso | stopped | g_rt_id | internal | true |
831 | datatags | started | g_rt_id | internal | true | default
831 | default | started | g_rt_id | external | true | system
831 | eew_dtp | started | g_rt_id | external | true | default
831 | system | started | g_rt_id | external | true |
830 | ascontrol | stopped | g_rt_id | external | false |
830 | javasso | stopped | g_rt_id | internal | true |
830 | datatags | started | g_rt_id | internal | true | default
830 | default | started | g_rt_id | external | true | system
830 | eew_tp | started | g_rt_id | external | true | default
830 | system | started | g_rt_id | external | true |
829 | system | started | g_rt_id | external | true |
829 | default | started | g_rt_id | external | true | system
829 | bc4j | started | g_rt_id | external | true |
829 | ascontrol | stopped | g_rt_id | external | false |
829 | javasso | stopped | g_rt_id | internal | false |
thanks,
KamHow are they connecting? What Service?
Any particular APPs that do this? Adobe perhaps? -
Easy DMS 6.0 SP09 - can not view .tif files
Hi,
I have a problem concering viewing tif files. When I try to view a tif file the file, easy dms copies it to
the work directory but doesn´t view it. It works well with pdf, doc, etc.
With SP07 I can view tif files.
Any Ideas?Hi David,
we have EasyDMS SP09 and it works fine with tif-files.
Which application do you use to view tiff-files ?
Did you write a trace-file ?
regards Iring
Maybe you are looking for
-
What is Smartshare and how do you use it?
What is Smartshare and how do you do it on Revolution I am totally lost on this one. Thanks
-
How do I restore Mail messages to Inbox
While working with my ISP on a mail problem I deleted all of the messages from Inbox and Sent. I maintain regular backups so I have the messages there. They are located at User/Library/Mail/Mailboxes/POP-(me)@pop-server. . . . How do I restore them t
-
Presenter movie not shared in Connect 8
Added a mp4 movie to a powerpoint and published in Presenter 8 to Connect server. In the meeting the movie does not play when I tried to share it from My Content folder. The share pod is blank. What is the problem? Thanks!
-
How to prepare Java Card Assembly files
Hi, If we rebuilt the API's in Java Card then how could be Java card Assembly files be generated thanks murali
-
Can't set up my mail or internet whats wrong on my new ipad
Got new ipad and we downloaded the itunes fine, but we can not get our mail or open to the internet, what are we doing wrong..??? johnfromfallon