Direct 2 Different Audio Sources to 2 Different Outputs?

Hi, I have searched for this but could not find it. I have a 3,1 Mac Pro running 10.6.8. I want to watch and listen to a video file that has it's audio sent to the Line Out where I have powered, desktop speakers. At the same time I would like to hear either Pandora or iTunes being played through the USB DAC I have connected to my home stereo system.
Is it possible?
Thanks,
John

You could use Audio Hijack Pro
<http://www.rogueamoeba.com/audiohijackpro/>
Hijack the application, use Mute so it won't send audio to the normal output, then add the Auxiliary Device Output effect to send the audio to the desired device.

Similar Messages

HT202000 Is there a way to have multiple audio sources sent to multiple outputs (i.e. communications with skype sent to headset, music sent to speakers )

Is there a way to have multiple audio sources sent to multiple outputs (i.e. communications with skype sent to headset, music sent to speakers ) I do this on my Windows but cannot find for mac. I am transitioning from Windows brain to Mac brain and having a little difficulty
OS Yosemite

Is there a way to have multiple audio sources sent to multiple outputs (i.e. communications with skype sent to headset, music sent to speakers ) I do this on my Windows but cannot find for mac. I am transitioning from Windows brain to Mac brain and having a little difficulty
OS Yosemite

Different in/out audio sources possible?

Is it possible to use one audio source for input and another one for output in Logic Pro 7.1 on MacOS 10.4.2?
This is what I'm trying to do:
- Audio in: Logitech USB Headset (mic and headphones)
- Audio out: Emagic A62m (external USB sound card)
The problem is, I can only select one audio driver in Logic. If I select the USB headset, I can record with the headset mic, but then all outgoing sound from Logic is played through the headset only. If I instead select the Emagic A62m audio driver, the sound is played through the sound card but I can't use the headset mic to record.
The system sound and sound from all apps except for Logic is played through the Emagic soundcard, which is set up as default sound out in system prefs. The headset is set as the default input source.
The Emagic sound card doesn't have any mic-in port, neither has my Powermac G5. I can't afford a soundcard with a mic input PLUS a good quality mic. This is why I plan to buy a good quality USB mic like
-Blue Snowball (http://www.macobserver.com/columns/rantsandraves/2005/20050722.shtml) or
-Samson C01U (http://www.samsontech.com/products/productpage.cfm?prodID=1810&brandID=2)
But unless I find out a good way to use the mic as a mic and loudspeaker at the same time :-D it seems that it will be pretty impossible to use a USB mic with Logic?
Even in such a simple app as Garageband it is possible to select a different source for sound in and sound. How can I setup Logic the way I need?

since apple took over logic, and the development into OSX.. the way audio, midi and logic work are all tied in at an operating system level. so it's just how you look at it: from tiger onwards, logic does have this feature built in.
for them to go and add separate audio features to logic now would be a complete reversal of everything that was intended with OSX and core audio.

Cutting with a different audio source

Hi,
my main purpose working with FCE is to cut Videos from my seminars and lectures. The camera (with built in microphone) is usually stationary and I have a head-set microphone which is amplified in the (big) room and recorded on a MP3-Recorder.
For cutting I would like to use the audio source from the mp3-recorder, it is much clearer, does not have any disturbances from the audience etc...
The problem is, that the timing does not really match between the two machines. For example I have a lecture with 1:08:20 video but the recorded audio on the mp3 recorder is (for whatever reason I do not understand) 1:08:28 long.
I have not yet found a solution for this. Is it possible to put markers on the two files (video and audio) in the timeline at exactly the same point and then say "stretch video to match audio markers"?
Any help much appreciated. THX

Convert the MP3 file to an AIFF file with the settings that match your FCE Sequence. Typically that would be AIFF at 48khz, 16 bit.
-DH

Trouble syncing two different audio sources

I have a JVC miniDV camcorder that does not have an external mic jack, but it does record sound in stereo from the internal microphone. I have rigged up my video ipod to record with a stereo lavalliere microphone on the person I am interviewing, then it's transfered to itunes. It records wonderfully, however when I try to mix the two audio sources in imove 06 or in Garageband, the recordings become out of sync in a few seconds. Any suggestions?

I think I resolved the issue. Here's the scoop. Apparently, the setting on my JVC camcorder (GR-D370U) was set to 12 bit.
Also, the MicroMemo XtreameMac ipod recorder has two quality settings to record on Low- 22.05 kHz and High-44.1 kHz.
the files are then saved in WAV format.
I did a one minute test run with the camcorder set at 16 bit and the ipod recorder set at "high." I put them both on imovie 06 and YES it worked! It never went out of sync!
I am not sure I totally understand why the two now match up, because I thought that the camcorder audio records at 48 kHz, but I'm not complaining! Anyway, thanks for everyone's comments. When I can afford to upgrade to a new camcorder with mic jacks, I will. But in the meantime, this will do!

Multiple users directed to different home or index pages.

I would like to have different users directed to different home or
index pages after they log on to Weblogic. We are running v5.1.
THanks

Well, maybe you can have a look to our example formauth.
After login, you call securytest.jsp. Here, depending of the user you can
redirect him to the right page.
Romuald RICHARD
Developer Relations Engineer
BEA Support
"Scott" <[email protected]> wrote in message
news:[email protected]..
>
Thanks Richard,
How can this be accomplished?
"Romuald RICHARD" <[email protected]> wrote:
After your users are logged in, you can call a jsp which will do the
right
dispatch, no?
Romuald RICHARD
Developer Relations Engineer
BEA Support
"Scott Rodenhiser" <[email protected]> wrote in message
news:[email protected]..
I would like to have different users directed to different home or
index pages after they log on to Weblogic. We are running v5.1.
THanks

Why does Premiere Pro CS5 process audio source before exporting clip in AME CS5?

Hello everyone, my first post here. I am currently trying out the trial CS5 Master Collection on my MacBook Pro. I've been using Premiere Pro CS5 to put together family videos. I select a certain portion of a sequence and queue it for export in Media Encoder CS5 in the format H.264 for iPod with video and audio.
Now in AME I have a queue list of about 5 clips from the sequence. But when I hit the Start Queue button, the bottom left of the progress bar states "Adobe Premiere Pro processing audio source from [then file name]" for all 5 clips from the sequence then creates the first output file.
Then it moves to encode the second and again states "Adobe Premiere Pro processing audio source from [then file name]" for all 5 clips of mt sequence then spits out only the second output file.
This continues for the remaining 3 output files. The total sequence length is ~32 minutes with transitions and it takes about 35 minutes to export which is all consumed by the process audio source of the 5 clips in my sequence for 5 separate times.
Is there a certain reason why Media Encoder or Premiere Pro does this process of audio source? Is this process necessary or needed? I experimented with choosing different output formats but the results are the same. Any help would be appreciated, thanks.

Now that's pretty good follow-up to your first post, and quickly too! Nice detective work.
As you have found, there is basically a Render/Replace operation going on in PrPro, to get the material in the correct form for AME.
Thank you for reporting, as it saved me, and others, from basically saying what you said.
Good luck, and sorry that you beat us to the punch.
Hunt

Only Audio source CD PLAYER and not change to LINE IN

Hi....
i have msi 915G Combo mainboard audio (cmi 9880l) and Tv Anywhere Master . i have problem with audio source for change to LINE IN
updated all drivers ( sound & tv anywhere ) please help about this...
Thanks

Hi all,
thanks for the replies. I'll try to explain better my scenario:
Pretend that a WM-Transfer Request was already created for a series of material linked to a certain Production Order --> 4 items in that case
          I've got a Production Order BOM with 4 components. So the system creates a WM-TR with 4 different items:
Material A123
Material B321
Material C143
Material D312
          Maybe no one will process this TR due to the fact that the Picking Date is far from today.
          So the Warehouse Supervisor didn't convert it into a TO.
Maybe the day after, the Warehouse operator recognize that the stock of the material B321, is not correct. SAP is misaligned with the reality.
        So, using MM-562 movement type and related TO, he set to 0 the quantities.
After this changes, the Warehouse Supervisor try to convert this TR into a TO using "TO IN BACKGROUND" button:
Material A123 - stock at system level
Material B321 - NO stock at system level
Material C143 - stock at system level
Material D312 - stock at system level
This error message appear and NO TO were created.
There's any way to modify this behavior?
Is possible (like VL06P) to set up a customizing or user exit that can skip only the item that are not pickable??
My expectation is to have a TO with only the 3 item that I can pick.
In our system we didn't accept negative quantity, as for Client requirement.
Thanks a lot
Marco

Bluetooth Audio Source- Auto Switching IOS6

I have had the iPhone4s working forever with 2 different Cadillacs (2010 and then a new 2013) only to find once I upgraded to the latest iOS6 on the iPhone 4s the Bluetooth hands free for phone changed its behavior for the worst. Symptoms:
Once the Phone is "paired" it works- someone can call me and I can answer it with the handsfree system in the Escalade. When making outbound calls is when it goes one of two ways listed below.
1. Phone dials and connects however the Audio "source" is the Handset in which case I have to click the Audio Source button on the handdset and select my Car handsfree for the call, which it then switches instantly to the car and everything proceeds fine. (The phone for some reason switches from the overhead audio source to handset by default)
2. Phone dials and connects and works perfectly over the Handsfree system
The phone ALWAYS connects as it should- it ALWAYS works flawlessly on incoming phone calls- its ONLY when I dial a call it goes to either the handset OR the Overhead system. There is NO pattern for the behavoir, it could work perfect for 3 straight calls then the 4 call it prefers the Handset. Or it could go to the handset on the FIRST call.
I am on the phone constantly so this bug is very annoying. When I dial someone I have to wait to see if its going to randomly select the overhead sound system or the handset. This was not a problem in this vehicle when I was running IOS5- it literally started when I upgraded the Iphone 4s to IOS6. I figured (hoped) that when the iPhone5 arrived it would make the problem go away however its the exact same behavoir.
Has anyone else experienced this awesomeness? (I have already deleted and re-paired it a few times to no avail)
Frank

I am having the same issue in my 2013 GMC Acadia Denali.
I believe it was working fine when I bought the car in December of 2012... but an apple update (iOS 6.01) created this problem.
I realize the car could still be at fault (perhaps the iPhone is doing things correctly, but the car is connecting to the bluetooth 4.0 standard incorrectly), but either way I just wish things were working like they used to.
This is a dangerous and annoying bug.
Message was edited by: Thubs - I updated the version of the OS that caused the problem.

Can I select an external audio source?

I have iMovie09 ver 8.0.6. I'm using a Panasonic video camera (it uses miniDV tapes) connected to my MacBook (white plastic 07) via firewire. When I have the cable from the mixer going into the camera and recording to tape; when I transfer the tape to MacBook, I get the external audio source great!!! However, when I plug the cable directly into the MacBook, it still gives me the audio (BUT) from the built-in mic of the camera. When I open GarabeBand and record the audio, its the external and its great. However, I don't want to have both recording at the same time only to overlay the GarageBand audio onto the video clip. Yes, I've selected the 'in-line' option from 'System Preferences'.
Is there a way that I can select the external source while in iMovie?? Looking at some other negative posts, I don't want to upgrade to iMovie 11 either.

I came across a much older post which I believe solved my issue. I connected everything up first, then booted up the MacBook; then I selected 'built-in audio' from the 'voice-over' option within iMovie. It recognized it right immediately. However, now I'm not sure that the audio is in fact coming from the 'hot' microphones that I'm receiving from the mixer. But that's just troubleshooting.

Same report, 2 identical servers, 2 different outputs???

We have a report that is produced correctly on our Staging server, but when we promote the same report to our Production server (which is a mirror of our Staging server), we get different output. The machines are identical in every respect except for the name. The same queues, fonts, and version of Crystal Report (10.2.3600.0) is installed on both. I wish I could upload the 2 versions of the pdfs that are outputted for you to see the differences, but there doesn't seem to be a way to do that here. Any ideas of what could be causing the discrepancies?

Hi Amanda,
Can I back track a bit here? I would like a bit more clarification on how this is being tested. From what I understand:
1) You have the same application running on 2 different servers which are mirrors of each other.
2) The report is exported to PDF directly, not previewed or printed first.
3) The PDF is opened locally on the client machine.
A couple of questions I have:
1) Is the client machine viewing the PDFs from both servers or are these 2 different clients as well? If the clients are different, then can you try opening the PDF from the second server onto your original client and see if they formatting is the same? I say this because I want to make sure the Acrobat reader is the same version on both machines and to eliminate the possibility that the PDF is fine but the reader may be the culprit.
2) You've removed the printer in the report I see. On the client machine, is there default printer installed and is it something other than the Generic Text Driver?
3) Same question as above but on the second server? A printer is important to Crystal even if you are not printing. Many years ago if a printer was not installed, the print engine would crash the report when you tried to run it. That's when the No Printer option was added but that's a different story. I just needed to stress the importance of having a printer installed.
Thanks,
Brian

Get Sequence's Enabled Audio Sources From Player Plugin

Hi, I'm a video editor with some limited programming experience and I've been exploring the possibility of expanding on Premiere Pro's feature set. Nothing fancy or 3D just adding functionality. Specifically I'm looking to add the ability to playback a clip in the Source monitor and preview the audio sources selected on the current sequence. Meaning whichever audio sources are enabled in the sequence would playback along with the video in the source monitor. (Avid has this feature). I've not yet found anything in the documentation that suggests that the current sdk can allow this. I can't find any way to get "enabled or disabled" info from the sequence. In fact I haven't found anything on getting any settings or values from the sequence.
Can someone point me in the right direction?
I also would love to be able to add several other similar enhancements to Premiere Pro. I'm not much of a programmer. It will probably take me ages to do something an actual programmer would take just a few days to do, so I'm more than open to anyone willing to help. I do know Premiere Pro inside out from a user's point of view and would be willing to contribute to any effort in this particular direction.

Yeah... I feared as much. It's too bad really. I have in fact sent a feature request for this several times. (Ever since cs4 rolled along) I just figured it wasn't something adobe was interested in. Or just not really a priority. Which is why I was looking to build it myself.
Oh well... I guess I can try the feature request again.

No sound when switching audio sources after 12.1.1.4 update. Requires iTunes restart every time.

System Details:
Windows 8.1 pro - 64 bit
i5-3320M @2.6GHz
12GB Ram
Lenovo Thinkpad Edge E430
Issue:
Before the 12.1.1.4 iTunes update I could simply turn on my bluetooth speaker or headphones and both Windows and iTunes would automatically switch to that audio source, even mid-song. I could turn the speakers on and off multiple times and the sound would almost instantaneously switch between sources without fail. Now I have to restart iTunes to hear music after turning on my bluetooth speakers or headphones. Itunes simply stops playing music, although the pause button does not revert to the play symbol, but the track progress indicator stops moving.
Please help!
Thanks.

Make sure you have the latest version of QuickTime (7.6.6) installed - if this is missing or out of date there may be no audio output from iTunes (including, but not limited to, playback through Bluetooth devices) or playback may be of poor quality.
Also check iTunes' Play Audio Using setting in Edit > Preferences > Playback (you will have to restart iTunes for any changes to take effect). In most cases selecting Direct Sound addresses playback issues when Windows Audio Session is active (though some users have reported the reverse),
If neither of these solves your problem try installing this alternate version: iTunes 12.1.1 for Windows (64-bit — for older video cards). The "for older video cards" label is a little misleading, as this also fixes some playback issues, QuickTime and Outlook interoperability errors, and problems with other third-party applications.

Mixing Audio Sources

Good Day;
I'm trying to mix multiple audio sources being broadcast to a server. Once they are mixed I'm sending them back to each destination. Thus far I have had no luck getting this task to completed. If someone can point me in the write direction that would be great.
Thanks
Later.. and have a good one..
Todd Stevenson

No solution found yet
Search this forum before asking.
Some questions like that but no usefull answers.
Although that I say again: you can mix it into file, but I failed to do the same with RTP.

TS4559 I don't know if this was already asked, but every time I put my headphones on my iMac OSX (2007 version) I always hear it on a different output then my headphones. But they worked last time... I just don't know what the problem is...

It just happen to me today... while I was listening to music it went to a different output. But strangely... it works on my ipad 2 wifi.
If this happen to you PLEASE reply. Thank You.

Hello pagtaljav1,
It sounds like you're not hearing audio from you headphones when connected to your iMac. You may want to check the output settings in System Preferences. You can find the steps to do this in this article:
OS X Mountain Lion: Change your computer’s sound output device
http://support.apple.com/kb/PH11235
If the setting is correct there, and you are still not getting audio from the headphones, I recommend resetting the NVRAM / PRAM:
About NVRAM and PRAM
http://support.apple.com/kb/HT1379
Thank you for using Apple Support Communities.
Best,
Sheila M.

My iphone4 recently stopped working in my car and no longer asks for audio sources. It is paired and turns off the radio when a call occurs but does not utilize the speakers or mic in the car.

My iPhone recently stopped asking for audio source in car and no longer works through the speakers. It pairs with the vehicles just fine, turns off music, but I must use the actual phone to communicate. What happened?

The same problem I have today afternoon.
My car audio system is compatible with iPod USB connector and worked fine for also 6 months.
When connecting my iPod nano 6rd gen via USB to car audio system, iPod displays on its screen a sucessfull connection, and music tracks is successfully displayed on the car audio system. But do not play. Switch forward or backward by playlist (by the buttons on the car audio system) works also, but still there is no start playback.
I tried plugged my iPhone 5 via USB to car audio system - it's works fine.
I plugged iPod to my mac computer - itunes says it's all Ok.
I am confused and do not understand what is happening.
May be restoring to default factory settings iPod....

Direct 2 Different Audio Sources to 2 Different Outputs?

Similar Messages

Maybe you are looking for