Direct certification in SAP CRM

Hi Forum,
This query is regarding direct certification in SAP CRM. I have read other threads but could not figure out one detail.
I qualify most of the condition laid for direct certification, I have done a few implementations on CRM 5.0 and most of my experience is in version 5.0 only, but I would like to give my certification in CRM 7.0.
As most of the certifications in 5.0 are already discontinued except the Associate one, will I be allowed to take certification in 7.0?
The condition laid by SAP says:
u201CTo appear for Associate level certification without attending any SAP course you need Minimum 1 year of SAP Implementation Experience with minimum of 6 months experience in the module and version in which you wish to take up certificationu201D
Please clarify if someone has similar experience.
Thanx,
Neeti

Hi Neetika ,
Please check the below link which brings you clarity on queries , still you have - get back to me. My best wishes.
SAP CRM Certification related queries
Regards,
Amrita

Similar Messages

SAP PM Direct Certification Question model.

Hi Experts,
Could you please provide me SAP PM Direct Certification Question model.
Thanks in advance.
Chandru.

See [here|http://www.sap.com/services/education/certification/certificationrole.epx?context=%5b%5bROLE_TPLM30_05_CER%5d%5d%7c]

SAP CRM 6.0 Certification too expensive!

Hi!
I am a certified in SAP CRM 5.0.    I paid Rs 3,00,000 for the course, which in my opinion was really expensive.
But I was looking at the couse schedule for SAP CRM 6.0 and i was really shocked ( Yes Shocked) by the fees they are asking for the course. I think this is beyond my imagination why they are asking so much amount for the course which,
1) Doesn't gaurantee any job placement.
2) It is just for 25 days ( If you go for one of the main modules, i.e Sales, Marketing etc.)
So what does SAP want to prove by this? Come on, one can finish MBA (which is for 2 years in India and 1 year in UK) by paying this much amount.
And I have heard that many people are finding it difficult to pass the certification exams these days.
If any responsible person from SAP can explain this to me, I would be greatful. And please provide specific answers why you are charging this much.
Customer Relationship Management
TCRM10 CRM - Fundamentals      10    INR 165,000.00
TCRM20 CRM u2013 Fundamentals II   10    INR 165,000.00
CR300 CRM Sales                         5    INR   82,500.00
CR800 CRM e-Commerce               3    INR   49,500.00
CR700 CRM Service                       5    INR   82,500.00
CR600 CRM Marketing                   5    INR   82,500.00
SAP CRM 6.0 Certification                   INR   25,000.00
(12.5% service tax on top of this amount)
If you want to do the course for one module (TCRM10 + TCRM20 + CR300) taken as example.
In India it will around Rs 5,00,000
In US dollar it will be around $ 10,500
In UK pound sterling it will be around 6900 GBP.
Plesase send your comments on this.

Hello,
When you are CRM 5.0 certified again why you want to go with CRM 6.0
SAP keep on releasing the version, do you want to go anttend all the version. It is not really worth.
If you are certified in one version, in my opinion, it is more than enough.
Regards,
Ravi

I have taken SAP Fi/CO training from a Unauthorized institute in Hyderabad. Know i want to do Certification in SAP FI/CO . Whether i am eligible to to take test directly from SAP AG ?

I have taken SAP Fi/CO training from a Unauthorized institute in Hyderabad. Know i want to do Certification in SAP FI/CO . Whether i am eligible to to take test directly from SAP AG ? Please any one guide me in this regard......

Hi,
Please contact - ATOS authorised Training institute - in Hyderabad for SAP FICO certification exam - for more details
Atos India Pvt Ltd
                         3rd floor, Astral Heights
                        Road No.1, Banjara hills
                        Hyderabad
                       500034
Facility Contact Number
            +91 (40) 66742800/06/09
Booking Contact Number
            +91 080 4082 90 00
otherwise - if you want to write a exam directly means minimum you should have to Real time FICO - Consultant experience 3Yearsor 3 end to end implementations - with client request
Thanking you
Mahesh

SAP CRM Sales or Service or Marketing Professional Certification Exam

Dear Experts,
I have Experience in SAP ABAP and BW .
I want to write SAP CRM Professional Certification Exam.
But my Question is in which CRM module(Sales/Service/Marketing), I should do the certification.
I mean which would be useful in my career.
Please let me know.
Thank you.
Regards
Sam

As you know in ERP, BW is cross system, in CRM happens the same, fristly I would ask myself in which ERP process where I was more involved. If I dealt with docuemtns (business transactions) I would go for SAP CRM Sales, if my vision is wider (MM, FI, CO) and not so focused on the SD area I would go for the services.
In your situation I would go for the SAP Certified Application Associate - CRM Fundamentals with SAP CRM 7.0 EhP2 and forget about the "Professional" ones.
https://training.sap.com/shop/certification/c_tcrm20_72-sap-certified-application-associate---crm-fundamentals-with-sap-…
Cheers!
Luis

SAP CRM CERTIFICATE still not recieved. dec 11 2014 s user id not recived

Hello Guys,
can any one help me.
I am an employee of sap labs. My i no :<<,moderator: removed SAP Id>> i have taken the SAP Certified Application Associate C_TCRM20_71 – CRM Fundamentals with SAP CRM 7.0 EhP 1. on DEC 11TH 2014 and cleared it with 81 %. at SAP India pvt ltd bangalore
<<moderator - removed all personal information>>
regards
sai
Message was edited by: Colleen Lee - removed a heap of contact and address information

Hi Sai,
When you presented the official examination institute ??,
Normally institutes show where the certification exam help you with this issue, they have direct contact with the SAP personnel,
You might help to know that it has been delivering your certificate,
Best regards,
JMP

SAP CRM integration to non sap Portal

Hi all,
my customer asks me the following questions. Could please help me to better understand his doubles ?
1. Do the iViews necessarily have to run in environment SAP EP to be visualized in WSP or they can directly be performed in WSP ?
2. The customer would like to integrate websphere portal to SAP CRM with an elevate security. At the moment our idea is to integrate using "redirect" by URL but this is not very compliant with their security standards. Have you please an other idea ?
Sorry for the

Have you tried looking at the iView Portlet Builder portlet in the Portal Catalog? Here's a URL to the iView Portlet Builder:
http://catalog.lotus.com/wps/portal/!ut/p/kcxml/04_Sj9SPykssy0xPLMnMz0vMAfIjzeMN4t1N9KNyUtMTkyv1Q_P0w3ITKzJzM6tSU_Qj9KPMgPKWLiCdIJaxqX4kqogjXMDXIz83VT9Y31s_QL8gJ6vK28fEEQC5CEwL/delta/base64xml/L0lJSk03dWlDU1lKSkpKQSEvb013d0FBQVlnQUNFSVFoQ0VFSWhGS0lZd0EhIS80RkdnZFluS0owRlJvWGZyQ0c4MDNZUSEvN18wX0c0LzM3NTU2OC9zYS5kZXRhaWxzQWN0aW9u?PC_7_0_G4_item=1WP10004D#7_0_G4

Cannot Delete BP Relationships in SAP CRM 7.0 - intermittent error

Hi Everyone,
We are running SAP CRM 7.0, SP08. We are trying to delete just the relationship "Contact Person" between an Account and a Contact in CRM. Sometimes when we do it everything works just fine and the relationship is removed in CRM and the Contact Person is deleted in ECC. Other times we are getting the following error: "Address is still being used and may not be deleted." If we expand the error, we are getting the following:
Diagnosis
You tried to delete a BP address. This BP is still being used somewhere in the system, meaning that you are not permitted to delete this address.
System Response
Error message. The BP address is not deleted.
Procedure
Look at the where-used list for the BP address. If you still want to delete the address, change the reference to this address in the applications affected. In most cases, if applications other than maintenance of business partner itself are affected, you can navigate directly to the corresponding application from the where-used list (by calling the context menu with the right mouse button). You can then try again to delete the BP address.
Note
If a business partner is merely moving, you only need to change the actual address details. All references are automatically transferred to the new address.
We have tried several scenarios and have not found a consistent result. For example, we can create Activities in CRM, Quotes and Orders in ECC, using the Contact, and then when we remove the relationship it all works as we expected and removes the relationship in CRM and deletes them in ECC. However, for another Contact this does not work. It does not seem to matter if the person is the "main contact" in ECC or not, whether we have flagged them as the Main Contact in CRM or not, whether they have lots of transactions or none. The only thing that does seem to be consistant is where they were created and the relationship defined. It seems if they were created in ECC it does not work, but if they were created in CRM it does work.
I looked at SAP note 830239, but it does not apply to CRM 7.0.
Any help in this regard is appreciated. Thanks for your time.
Bryan

Hi,
We used the questionnaires (questionnaires was displayed and worked) but we faced issues with the display in web UI (only when the questionnaires are linked to an activity/opportunity). The Admin screen for questionnaire works well).
We have implemented the following notes in order to correct this displaying issues :
- 1858059 : Upload the CRM_SVY_GENERATE_BSP_TEMPLATE.ZIP, refresh cash and generate all surveys
And then notes mentioned above
- 1914885 & 1944288 in the relevant order.
But we cannot display anymore the existing surveys (They are active, all scenarios are flagged).
Error message : Cannot get questionnaire HTML string
Any Ideas how to proceed to solve ? (we work on EHP2)

SAP CRM 7.0 and Enterprise Portal

Dear SAP Gurus ,
I have question about the New CRM WEB UI and integration to SAP Enterprise Portal .
We have been using the SAP Enterprise portal for accesing the SAP CRM functionalities before (eg create Opporutnites and Sales Order ). But with the New SAP version(7.0 and 2007 ) its possible to have its own portal.
Now the question is it possible to integrate the NEW SAP WEB UI into the existing portal ? Eg: If we want to have link in Enterprise portal with the Sales Order create functionalyt direlty without going into the stand alone CRM WEB UI . Would it be possible to directly call the Sales order service WEB UI in enterprise portal . Right now what we see is that the NEW CRM WEB UI is stand alone and for these type of fuctionalites the user need to login to the NEW web ui and then go to the create sales order screen .
Is it possible to directly embed the new UI components in the existing SAP enterprise portal ?
Many Thank for your kind advise !
Best Regards,
Ankur

Ankur,
Once you have correctly integrated to Portal following the SAP Note, you will no longer see the CRM Navigation. They will be Portal Navigation. If you have read and understood the note, it will be clear. On an overview, let me explain the steps involved.
1. You create a CRM role (based on some job role) say "Sales Rep" and have configured the CRM Web UI for all the navigation and applications. Like Account maintenance, Opportunities, Sales order create etc. etc.
2. Following the note and running a CRM transaction, you will now "Export" this CRM role to an external file. This file is very similar to a "business package". All the portal roles, pages, iVeiws etc. get created.
3. You will now "Import" this into your portal. Again follow the notes to know the loaction.
4. In the portal, you will assign this "portal role" to your users.
When these users log on to portal, they will see Portal Navigation (not the CRM navigation). So, the main point lies in defining the CRM role and get it working.
Hope you get the point....
Easwar Ram
http://www.parxlns.com

SAP CRM 7.0 Webclient - Product Identification (IBase or IObject)

Dear SAP IC-Experts ,
I am new in the configuration of the SAP Interaction Center (SAP CRM 7.0) and have a process orientated question.
In my proyect the company is producing bathroom products which are installed in hotels, private homes, etc.. They sell their products via partner so they in most cases dont know where there products are installed until the end-user calls when they have a service problem. In the Interaction Center I have seen the Account and Product-identification Workcenter Page.
1. My first question is do I have to use IBase or IObjects to save the proyects in the Database? If I understood correctly IObjects can only be used if I have a serial-number for example which are used for cars or laptops to be able to uniquely identifie a product. As Bathroom products does not have this this kind of identification number to identify a single object I have to use IBase right? Additionaly I the company sells for example 30 times a shower cabine to a hotel I can not use IObject too because there is installed 30 times the same product in different floors and hotel rooms. This leads me to the conclusion that we have to use IBase which leads my directly to the second question
2. When using IObjects there is a Create-Button to create a new IOBject but this create button does not exists for a IBase in the View. When the end-user is calling me can I create in a very short time the installed base (IBase)? I hope I could make myself clear?
Basically I need to know if using IBase or IObjects for bathroom products and if using IBase how can I create it quickly as an IC Agent when the client is calling?
Best Regards
Oliver

Hello Oliver,
Yes, you are correct. The IObject (individual object) is intended primarily for consumer-facing scenarios involving serialized registered products. For a B2B scenario where a company has a footprint of installed products (whether it be HVAC equipment, plumbing systems, faucets, etc.) it is probably preferrably to use the Installed Base object to model the installation.
As you noticed, there is no native possibility to directly create new Installed Base hierachies from inside the Interaction Center directly (though there is an option for IObjects). The rationale here is that while a contact center agent would often register a new consumer product, they probably would not usually create new Installed Base hierarchies; rather this is something that, like creation of service contracts for example, is typically done by a Service Professional using the ServicePro role. However, you can always add a link to your IC menu to launch the ServicePro screen for IBase maintenance/creation in order to allow the agent to create or maintain the IBase hierarchy. A little cumbersom of course, but definitely a possible workaround.
Warm regards,
John

Connecting SAP CRM (or R/3) to FileNet

We are implementing a SAP CRM 5.0 system, and FileNet P8 is to be used as the document repository for SAP CRM.
We are using the FileNet adaptor, called ACSAP for SAP R/3, which allows us to connect to SAP CRM using the generic ArchiveLink functionality. However, we have found that the generic SAP ArchiveLink functionality is very restricted compared with the standard SAP CRM document management (e.g. versioning, creation from templates etc).
For example the documents tab on a SAP object, such as the business partner, allows users to import or create documents from new or from a template. The user will be prompted to enter metadata and this document will have a version associated with it and it can be checked in and checked out by the user. However we are currently using ArchiveLink which requires the user to click "activate ArchiveLink" to create the ArchiveLink folder. In order to save a document in ArchiveLink the user must then import or create a document in the ArchiveLink folder. Unfortunately most of the functionality mentioned previously, such as creation from a template and metadata capture, is not available when creating a document in the ArchiveLink folder. We have also found that due to the lack of metadata the document name is generically assigned and thus is not useful to the user for identification.
In addition it is not possible to force users to save their documents into ArchiveLink, therefore they are able to save them outside of the required document repository. We have been unable to find a good solution to this problem.
So we want to know if it is either possible to:
- Specify that SAP CRM document management use ArchiveLink as its standard document repository?
- Connect FileNet/ACSAP directly to SAP CRM document management without using ArchiveLink?
Has anyone had experience connecting SAP CRM (or SAP R/3) to FileNet, and is able to provide us with some insight?
Thanks
Philip

Question was recreated in DMS group. No answer as yet, but hoping to get answers from SAP soon.

Moving OTC processes from SAP R/3 into SAP CRM 5.0

Hi all,
A SAP CRM client that I am currently working on have decided to extend the project scope and now want to move all their existing OTC processes from R/3 to CRM 5.0. Their system is heavily bespoked with a high level of user exits, as during the initial implementation they preferred to use more ABAP than config although some of the functionality was available as standard. If they havent figured it out yet, Im sure theyll be asking themselves soon whose clever idea that was. They have over 1m customer records with a low transaction volume per customer per year, configurable products, complex pricing and use Biller Direct, just to mention a few.
Has anyone got any experience in doing this previously? Any issues, challenges or lessions learnt apart from the obvious ones?
Thanks!
J

Seshu Mannepalli wrote:
> As part of the upgrade we are going to do initial upgrade in the mock server and vendor is going to provide mock server with AIX 7.1 O/S. Current database size is 100GB, hence we are going to copy the production server data into the mock server using export and import method,
>
> Here my doubt is can i install db9.7 directly and do the import (using compitable kernel)?, insteady of installing source database version 8.1 and later upgrading to db2 9.7 . Please clarify me whether can i go head and install the db2 9.7 and do the system copy using R3load.
Hello,
You can go ahead for IMPORT with DB 9.7.
We completed an OS/DB Migration Project (which involves system copy using EXPORT/IMPORT) and we utilized direct newer version of DB2 on the target during IMPORT.
But please confirm whether the kernel of your release would work fine with DB 9.7 or not. Otherwise, there is no problem in going for higher version of DB2 here.
Small question - Why you want to test the Mock Upgrade on DB2 version which is different than the current version on production server ? Or are you planning to upgrade your current DB2 8 to DB2 9.7 BEFORE the SAP Upgrade on all the servers - then the testing is OK I think (however OS is still the different - Or may be you will go for system copies for this too !)
Thanks

Order not available in ECC6.0 where as the same order is in SAP CRM?

Hi SAP Experts,
I have come up with one issue as follows:
I have changed the sales order in SAP CRM and when i try to open the same document in ECC 6.0 in TCode:VA02,it is directing to logon screen with user ID and Password.When i input my logon details and enter , it is now directing to VA02 screen with error as " sales Document Cannot be blocked" and the error info shows as " document may be archived in CRM".
In VA03 ,i can access the order but in VA02 this problem is occurring.This only one order is having the problem and other orders i can access and change in VA02.
I would appreciate providing the solution.
Thanks in advance.
Best Regards
Succhi

Hi Succhi,
Since your document is changeable in CRM then report CRM_CHECK_DISTRIBUTION_STATUS wont fix in this case but just in case you need the report in the future you enter the object ID which you can get in table CRMD_ORDERADM_H and the transaction type. To update the status you uncheck the P_CHECK field as this just runs in test mode to see if the document status needs updating.
The orders have the status I1056 - transfer_failed. If the order have this status we don't delete the csl reference because the order can only changed in the crm system and should be not changed in the r/3 system. Does your document in CRM have this status? If there are no unprocessed queues then you can manually delete the CSL lock in ERP but this should only be an exception and not part of normal processing.
Kind regards,
Vanessa

SAP CRM multiple clients possible

Hi,
We have a NetWeaver SAP CRM system (ABAP + JAVA) stack.
We run an internet webshop application on the JAVA stack connected to CRM ABAP stack, client 010. The CRM ABAP stack connects to SAP ERP.
Q1: Is it possible to add a new client 020 in the ABAP stack of the CRM system?
Q2: I don't understand in CRM the connection between the JAVA and ABAP stack. If I add a new ABAP client 020, do I need to copy the JAVA stack/client also?
Who can help me guiding in which direction I have to go?
Note: We want to connect a non-SAP system to client 020.
Overview:
ERP ABAP (client 010) --> CRM ABAP (client 010) --> CRM JAVA stack
non-SAP (legacy system) --> CRM ABAP (client 020) --> CRM JAVA stack
Q3: What are the problems (challenges) I can expect?

Hi Rene,
I think it is not supporting multiple clients. Wait for some additional replies.
Regards,
Ravindra

Integrating with SAP CRM / SAP ECC apps with SMP 3.0

Hi All,
I have some questions for integrating SAP ERP / SAP CRM applications with SMP 3.0, what my questions is
1) I want integrate SAP ERP / SAP CRM apps with SMP 3.0 from scratch. (which are available in the SAP Portal)
2) For that what are all the per-requisites, after integration is done if application want required any changes then how to update that app.
3) Provided SAP ERP / SAP CRM applications are all available executable only, is there any source are available for all theat apps.
Some of SAP ERP applications SAP ERP Customer Order Entry, SAP ERP Order Status, SAP ERP Quality Issue, SAP Employee Lookup and etc.. and
Some of SAP CRM applications SAP CRM SALES, SAP CRM SERVICE MANAGER, SAP Customer and Contacts, SAP Customer Briefing, SAP Customer Financial Fact Sheet, SAP Customer Loyalty, SAP Direct Store Delivery and etc... which are all available in the SAP Portal.
Please help me on the same.
Thank & Regards,
Ranjith Lingala
+91-9985241328

Hi All,
I have some questions for integrating SAP ERP / SAP CRM applications with SMP 3.0, what my questions is
1) I want integrate SAP ERP / SAP CRM apps with SMP 3.0 from scratch. (which are available in the SAP Portal)
2) For that what are all the per-requisites, after integration is done if application want required any changes then how to update that app.
3) Provided SAP ERP / SAP CRM applications are all available executable only, is there any source are available for all theat apps.
Some of SAP ERP applications SAP ERP Customer Order Entry, SAP ERP Order Status, SAP ERP Quality Issue, SAP Employee Lookup and etc.. and
Some of SAP CRM applications SAP CRM SALES, SAP CRM SERVICE MANAGER, SAP Customer and Contacts, SAP Customer Briefing, SAP Customer Financial Fact Sheet, SAP Customer Loyalty, SAP Direct Store Delivery and etc... which are all available in the SAP Portal.
Please help me on the same.
Thank & Regards,
Ranjith Lingala
+91-9985241328

Direct certification in SAP CRM

Similar Messages

Maybe you are looking for