Direct comparison old and new mini into tv

Hi all. I notice a slew of threads berating the display quality of the mini and I want to put my chime in.
I have a 1.6 core duo mini and I replaced it Saturday with a new one.
I have a 32 in LCD in the living room, the old one was hooked up with a dvi to hdmi lead and the new one is the same except there is the mini dvi to dvi adaptor in the way.
The old mini displayed fine I noticed no gradient issues etc. With the new mini any gradients cause large chunks of banding as if there were only 256 colours and I have to say I am not very impressed.
I suppose what I am asking is, is there anything I can do, but I rather fancy I know the answer.
The LCD is being run in its native res and the two mins were/are doing identical duties. But the long and short is the old mini displayed much better on my TV.

My new Mac Mini works perfect in 1080p 1920x1080 mode on my 42" and 47" 1080p HDTVs using a DVI-HDMI cable with the included mini dvi-dvi adapter.
screen capture:
http://i8.photobucket.com/albums/a21/jogiba/computer%20sales/Picture1-1.png

Similar Messages

I am ordering a new IPad 4 and I now own an Original IPad. Can I transfer all settings and info. direct from old to new?

I am ordering a new IPad 4 and I now own an Original IPad. Can I transfer all settings and info. direct from old to new? How?

Yes, restore the iPad usind a backup file created in iTunes from the iPad 1.

Difference old and new transfer

I will find out the fifference between old and new transfer process.
On one hand I know the old works with update rules an inforsource and transfer rules. the new one has an transformation and a dtp.
also I know that there are update rules for direct writing and update rules for flexible writing.
direct is for hierarchies also and flexible is to change data before the target.
So my question:
I wrote that I need Update Rules when I want to write from master data while loading data into a charakter. I wonder is the name flexible update rule here used in the same way as transformation rule? or do i really have to use the old transfer 3.x?
At least the question: What is the real difference between direct or flexible update rules and a transformation?
Why can'T I load a history with a transformation and with flexible update rules? Why do I have to use direct update rules?
I would be very happy if you tell me that update rules and declaring rules in transformation means the same... but i think it is not like that..

In BI 7.0 we have DTP to load data. In transformation we have start routine, end routine and transfer routine.
You can go through these links:
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=32737032
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417800)ID0190221850DB00612828832805035416End?blog=/pub/wlg/6772

I accidently created a new apple account on my new phone, How do I merge my old and new accounts

I had an old account but had lost access to the email. In frustration I created a new account to use with iTunes on windows. Now history repeats itself and I've a new iPhone 4 that I want to load with data from both old and new accounts. Do I need to just go to the Genius bar next time I'm in town or is there some way to log into each account, back up the data and merge to the new account?

Actually not trying to merge the accounts, but back up the DATA i have stored in those accounts. Once I've pulled the many songs I purchased under the old account I'll burn them to something and delete the old account... and I think I've just answered my own question.
i.e. Don't try to merge anything, just salvage music and other data (contacts, notes)

HT5548 I upgraded one of my programs and now the old and new both appear on launch pad, and I can't delete the old one. Is there a way I can do that?

I upgraded one of my programs and now the icons for both old and new appear on the launch pad. I don't need or want the old version to display, as it's been imported into the new one. I can't seem to figure out how to edit it off the launch pad.

Hi there,
More then likely, the old version was installed independently from the App Store. The article below goes over the process for removing these application.
OS X Lion: Install, update, and uninstall apps
http://support.apple.com/kb/ph4524
To uninstall other apps, drag the app to the Trash (the Trash is located at the end of the Dock), and then choose Finder > Empty Trash.If you change your mind, before emptying the Trash, select the app in the Trash, and then choose File > Put Back.Warning: When you empty the Trash, the app is permanently removed from your computer. If you have any files that you created with the app, you may not be able to open them.
Hope that helps,
Griff W.

Fetching old and New Data in HRMS for 'Update' Transactions

Hi All,
I need to find out the old and new values for a person_id from HRMS tables (Per_all_people,Address,contacts etc) based on Person Id. Do we have any Standard Script or has someone prepared such script and can share with me. I am not expecting the Corrected records to be fetched as it overrides the same line but atleast for such records which comes under 'Update'.
For Example, If for Perso_id 123, the Telephone# was 8888 and then it is updated to 9999. So my query Should return somethign like:
Information From To Effective Date
Telephone 8888 9999 28-Nov-2011
Note: Can't use any triggers.
Thanks

Hi,
You need to include a new keyfigure in the cube and map with both the new and old compcodes and the write a field routine with the logic that meets your requirement by passing the values of PSPNR into the internal table and get the output for the keyfigure value. Also you use if else condition as per the requirement.
Hope this helps...
Rgs,
Ravikanth.

Combing lines in all of my footage old and new???

I am having combing lines problem with all of my footage. It doesnt matter if it is DV,HD, or uncompressed footage. On all of my projects old and new. Could this be a quicktime thing? It has affected all of my footage. I just noticed this the last time I worked with it all was fine???
FCP 6.0.4

Never judge the quality of your footage on the computer monitor nor in the CANVAS or VIEWER. They lower the quality to allow for smooth playback.
I SHOUT in this stock answer...pardon that.
#2 Blurry Playback
Shane's Stock Answer #2: Blurry playback
ONLY JUDGE THE QUALITY OF YOUR MATERIAL ON AN EXTERNAL BROADCAST MONITOR, OR AT LEAST A TV.
The Canvas shows you what happens after the codec you are working with has been applied. The Viewer shows you the material in its native format. Once you drop the footage from the Viewer into the timeline, it inherits the attributes of the sequence. If it is a DV sequence, the footage will render out as DV.
1. Disable overlays on the Canvas.
2. Make sure you've rendered everything (no green bars at the top of the timeline).
Video playback requires large amounts of data and many computations. In order to maintain frame rate and be viewable at a normal size, only about one-fourth of the DV data is used in displaying the movie to the screen. However, the DV footage is still at full quality, and is best viewed thru a TV or broadcast monitor routed thru your camera or deck.
Shane

Difference when using old and new PCA datasources

Hello experts,
We have implemented the new PCA datasources provided by business content version 3.3. We have built a new infocube (ZPCA_C01) as we were not concerned about the appropriate performance of these new datasources 0EC_PCA_3 and 0EC_PCA_4.
After loading the new cube (ZPCA_C01) with the new datasources 0EC_PCA_3 and 4, we made a comparison to the content of the old cube 0PCA_C01, that was loaded with 0EC_PCA_1.
For thesame period (2005.001-002) there is a difference between the contents of the cubes. When checking the results I found that this may be caused by the fact, that 0EC_PCA_4 does not populate "Total credit postings" and "Total debit postings" fields in the new cube, however, we have a couple of records in table GLPCA, where ACTIV = 'PRC4', and that have a corresponding record in GLPCT, where there is a figure in
TSL02 field. It results in the fact that>
- 0EC_PCA_1 extracts the figure from GLPCT for Posting Period 2,
- 0EC_PCA_4 does not extract the same figure from GLPCA.
Can you please help me with the above problem? Do you know how Credit and Debit figures get to BW from GLPCA, where ACTIV='PRC4'?
Thanks,
Csaba

user10871298 wrote:
Hi
I am exeuting a trigger and while retrieving a date field from it using :OLD and :NEW variables, it leaves the timestamp part.
for example,the actual value for start_date field in the table is '10/12/2005 7:04:25 PM', but when I use :NEW.start_date , it returns only '10/12/2005' .
How to make it return the timestamp also?
Thanks.How are you determining that it's missing the time component from it?
If it's a DATE datatype then it will have both date and time components. If you take that and store it in a DATE datatype column then that too will store the date and time components. If you then go and view that data, it will have both date and time components unless you have your local settings (NLS settings etc) set so that dates are displayed without the time portion. That doesn't mean the data is not there, but that you are not displaying it when you query it.

Facetime stopped working on mac. says "failed". works fine on phone and new mini. Any ideas. already went thru all the troubleshooting. added a unique email address to the mac. just keeps failing. ????

facetime stopped working on mad. says "failed". works fine on phone and new mini. tried all the troubleshooting, added a unique email to the mac facetime, nothing seems to work. just keeps saying "facetime failed". any ideas???

I Got the same problem. When you change the output to internal speakers again facetime works again in the mac.
I think it may be some kind of incompatibility with the current driver. I used in the past the old tascam Us-122 and worked well but its driver don't work more for the mountain lion system so i bought this newest one.
When i used the old one I could use the volume keys on the mac keyboard to control output volume; now with the us-322 when hearing music you can control volume just from the tascam.

T.code FF7A: how to see old and NEW open items?

Hi All,
I've filled the "Cash Managemeng Group" in the master data of a Customer.
The report Cash Manag.& Forecast doesn't update its old open line Items.
Only the documents successive to the insertion of the "Cash Managemeng Group" in the master data are updated in the report.
Could anyone tell how to obtain all the items (old and new) in the report?
Thanks
Gandalf

There are a couple options depending on the additional details of your situation....
Within t-code FDFD, there is a button labeled Data Setup. This button is intended for use when cash management (CM) is activated for an existing company code and CM needs to be updated with transactions created prior to the activation. It deletes all data in cash management for the Co.Cd. and then builds the CM data for all GL, customer and vendor accounts. There are also options to update CM for other areas (Sales, Procurement, Treasury, etc.)
Also within t-code FDFD, there is a button labeled Correct Data. This button can be used instead of the Data Setup button, if the CM data for a particular area needs to be corrected. This function has the following options: All GL accounts, All GL accounts with open items, All GL accounts w/o open items (non-open item managed accounts), All Customers/Vendors, All Customers, All Vendors.
It's best to run these functions when transactions are not being created on the system.
Regards,
Shannon

Regarding passport registration issues, I need to have a letter from you including both the old and new imei numbers. Could you please send me an email mentioning that I have changed the phones with the given imei numbers?

Regarding passport registration issues, I need to have a letter from you including both the old and new imei numbers. Could you please send me an email mentioning that I have changed the phones with the given imei numbers?

You're not addressing Apple here. This is a user-to-user technical support forum. If you want to contact Apple, use the Contact Us link at the bottom right of every page for information on how to do so.
Best of luck.

Please help me to merge two places.sqlite to get my old and New history at the same time, every time i rename my two places.sqlite to see my old and new history

every time i rename my new places.sqlite to see my old history and come back rename old places.sqlite to see my new history, i tired and i found No Way to merge two places.sqlite :( but it's must be found this way for The PPL to see their old and new history :(
Thank You all in Advance

You can't merge history otherwise then using Sync to store the history and bookmarks of one places.sqlite on the Sync server and then disconnect.<br />
Copy the second places.sqlite file to your Firefox profile folder with Firefox closed.
Then setup Sync once again using that account and merge the content on the Sync server with your computer.
* Merge this device's data with my Sync data

How to fetch old and new value from of a field(non-key) from LOGDATA

Hello SDNers,
i m fecthing LOgdata from dbtlog table[in our case the log is not getting Updated in CDHDR and CDPOS table]
i m using the same logic as it is used in RSVTPROT
but the problem is
" IT is fetching OLD and NEW VALUE after Update from same field LOGDATA of dbtlog table BUT when i used same logic it is FEtching only OLD VALUEs,
CAN U GUYS PLS TELL ME HOW TO FECTH OLD VALUE and NEW VALUE of a PArticular field(non-key field, fecthing key field is not an issue) From LOGDATA field of DBTLOG.
thx a lot in advance
Regards
Kuldeep

Hi,
May be this link is useful to you.
a®

Error : Old and new exceptions cannot be used at the same time.

HI ALL,
i build a new exception class with message class and i want to replace the
old exception that i had in the method ,what i did is delete the exception from the method
signature and add the exception class .
the problem is that when i try to activate the method i get error :
Old and new exceptions cannot be used at the same time.
CALL FUNCTION 'CALCULATE_HASH_FOR_CHAR'
      EXPORTING
        alg            = 'MD5'
        data           = iv_iss
      IMPORTING
        hash           = lv_issu
      EXCEPTIONS
        unknown_alg    = 1
        param_error    = 2
        internal_error = 3
        OTHERS         = 4.
    IF sy-subrc <> 0.
      RAISE EXCEPTION TYPE cx_user_mng EXPORTING
      textid = cx_user_mng=>wrong_isrs.
    ENDIF.
I want to use the new exception class ,
how can i avoid this error ?
Best Regards
Edited by: Joy Stpr on Jul 22, 2009 2:56 PM
Edited by: Joy Stpr on Jul 22, 2009 3:16 PM

Hi Joy,
Check this link.
[Old and New Exceptions Cannot be used at same time|Urgent problem, give me a hand;
Old and new exceptions cannot be used the same time, what does this mean???
Regards,
Lakshman.

My airmac no longer finds cameras. Will find iphone, but no longer photos either. My Canon Power Shots, old and new, are as good as rocks.

Recently my MacBook Air does not list devices that are cameras. It used to, but does not now. I have recently a) used MacKeeper, b) deleted movies, photos (thousands of those spawning ones) for space, c) installed ios 7 on my iphone, d) bought a Canon Power Shot SX 170is.
Image Capture, Image Browser EX, iphoto--nothing gets photos...nothing sees photos residing on my Canon PowerShots (old and new) or my iphone. Macbook Air can not find cameras.
Help. All cameras are rocks now.

MacKeeper is considered Malwear and has destroyed many iPhoto libraries - read the user tip on it - https://discussions.apple.com/community/ilife/iphoto?view=documents - my best guess is that your problem was caused by MacKeeper - I suggest you remove it according to the instructions in that user tip
to test depress the option key and launch iphoto - create a new library and see if it works correctly with your cameras - post back with the results
LN

Direct comparison old and new mini into tv

Similar Messages

Maybe you are looking for