Direct Connect Migration Issues
So I'm about to get my MacBook Pro in the mail soon and I was looking at Apple's Great Migration page. Here is what I want to do (direct connect):
Direct connect
To move files by connecting your Mac directly to your PC:
1. Connect your Mac to your PC using a standard Ethernet cable.
2. Make sure that both computers are turned on.
3. In the Finder on your Mac, choose Connect to Server from the Go menu to open the window.
4. Type your PC's network address in the Server Address text box using one of these formats:
* smb://DNSname/ShareName
* smb://IPaddress/ShareName
5. Click Connect.
6. Follow the onscreen instructions to enter your PC's workgroup name, user name, password, and the volume or folder you wish to access.
7. Your PC volume should appear on your Mac Desktop.
8. Open the volume and drag and drop files directly from it to anywhere on your Mac.
9. When finished, drag your PC volume to the Trash to unmount it.
For #4, what do I enter in for this?:
* smb://DNSname/ShareName
* smb://IPaddress/ShareName
Thanks so much!
There are several BDE replacements that allow you to connect to
Oracle from Delphi with out BDE or ODBC
DOA- Direct Oracle Access from Allaround Automation ~$200.00
http://www.allroundautomations.nl/index.html
NCOCI8 is freeware.
Goto to www.kylecords.com and they list BDE replacements.
I use DOA and their PL/SQL developer systems from Allaround
Automations and they are both excellent systems with excellent
support.
Similar Messages
-
8350i direct connect messages issue
Hi I was wondering if there was a solution for the messages popping up in the messages folder when someone direct connects me? Yes I have turned off the forward to none and really could not make heads or tails of the one post there is on this issue. I am assuming that us 8350 owners have to wait for a software upgrade. Is this correct or has this issue been solved in another way.
ThanksI have the 8350i and a Mac.
I have my info on iCal and Address Book.
When I sync, everything is ok, except 2 problems.
The Direct Connect ID's and the BB PIN's do not sync.
In the Mac's Address Book, I have them under:
DCID = 'Home 2'
BB PIN = 'Home Fax'
I have them labeled like that because that's how Entourage/Address Book syncs them.
For example,
When I create a new contact on my BB that has email, phone, address, direct connect#, PIN, company... and then I sync with my mac... I will see in the Mac's Address Book the new contact with the email, phone, address, company... but no direct connect# and no PIN.
In short, there is no field that corresponds to Direct Connect# and PIN# when trying to sync with BlackBerry Desktop Manager for Mac and a BlackBerry Curve 8350i. Is this true?
THX
Message Edited by framal on 10-05-2009 02:19 PM -
you are running the latest version of iTunes, have no other USB devices attached, have no security software installed, and are directly connected to your ISP source, simply restarting the computer and the iOS device can clear up certain issues that could prevent you from restoring. After restarting the computer and iOS device, attempt to restore again.
How big is your library? I would recommend the following troubleshooting steps:
- Backup your library. Always a good idea before messing with things.
- Create a new library. Refer to this article for details: http://support.apple.com/kb/HT1589. This won't delete your old library, you're just creating a new empty one. Also refer to this article to get back to your old library later.
- Add a few albums into this new library. Not everything, just a small sampling, as a test.
- Activate Match on this new library. You shouldn't have to re-pay, it should just say "Add Computer" or similar.
- At this point, Match should run again. With just a few albums it should complete in just a few minutes.
If iTunes doesn't crash at this point, then likely there's something about your original library that Match doesn't like - what that is I don't know, but at least you'll know it's not your PC. If iTunes still crashes, then if could be a number of other things, but probably not your library. My next suggestion (if you haven't already done this) is to uninstall / reinstall iTunes. If that doesn't work, then my next ideas you won't like. -
Started the transfer process from my old MacBook to a new MacBook pro using Migration assistant 12 hours ago. The screen says transferring your information. Moving about 270 GB using an Ethernet cable directly connected. Is this normal?
You can get a thunderbolt to firewire adapter. You can then get a firewire 400 to 800 cable and put the old computer in target mode. Then you can follow these instructions.
http://support.apple.com/kb/HT4889
Choose migrate from other disk or volume. -
Traceroute issue- MPLS VPN on directly connected interfaces
I have 2 Catalyst 6509 Switches that Im trying to bring up and MPLS VPN connection between. The loopbacks can ping each other, as well as the directly connected interfaces (the interfaces travel through 2 switches, but no routing etc in between). An OSPF neighbor relationship DOES come up, and the routing tables appear normal. However, the MPLS VPN does NOT come up.
After further review, I found that the routing tables are correct on either side for the loopbacks (public addresses X’d out on first 3 octets):
SWITCH A:
Bryan-26th-CAT-2#sh ip route 10.255.2.2
Routing entry for 10.255.2.2/32
Known via "ospf 23532", distance 110, metric 2, type intra area
Last update from X.X.X.70 on Vlan65, 00:10:25 ago
Routing Descriptor Blocks:
* X.X.X.70, from 10.255.2.2, 00:10:25 ago, via Vlan65
Route metric is 2, traffic share count is 1
SWITCH B:
DAL-COLO-6509-1#sh ip route 10.255.2.3
Routing entry for 10.255.2.3/32
Known via "ospf 23532", distance 110, metric 2, type intra area
Last update from X.X.X.69 on Vlan65, 02:26:50 ago
Routing Descriptor Blocks:
* X.X.X.69, from 10.255.2.3, 02:26:50 ago, via Vlan65
Route metric is 2, traffic share count is 1
This is exactly the same for the directly connected interfaces on VLAN65. (X.X.X.69 and X.X.X.70). The ARP cache also shows to be correct:
SWITCH A:
Bryan-26th-CAT-2#sh arp
Protocol Address Age (min) Hardware Addr Type Interface
Internet X.X.X.70 147 0009.b6a4.b800 ARPA Vlan65
Internet X.X.X.69 - 001c.b144.5800 ARPA Vlan65
SWITCH B:
DAL-COLO-6509-1#sh arp
Protocol Address Age (min) Hardware Addr Type Interface
Internet X.X.X.70 - 0009.b6a4.b800 ARPA Vlan65
Internet X.X.X.69 141 001c.b144.5800 ARPA Vlan65
And once again, the OSPF Neighbor relationship does come up:
SWITCH A:
Bryan-26th-CAT-2# sh ip ospf neigh
Neighbor ID Pri State Dead Time Address Interface
10.255.2.2 1 FULL/BDR 00:00:30 X.X.X.70 Vlan65
SWITCH B:
DAL-COLO-6509-1#sh ip ospf neig
Neighbor ID Pri State Dead Time Address Interface
10.255.2.3 1 FULL/DR 00:00:33 X.X.X.69 Vlan65
In the Troubleshooting MPLS VPN manuals- it shows to test trace routes. All of our other connections like this the trace routes work fine. In this case though, I cannot trace route not only between the loopback interfaces, but between the DIRECTLY CONNECTED interfaces. I don’t know what this is. It should simply be a one hop trace route. I believe this is what is keeping the MPLS VPN from coming up. Any ideas? Here are the relevant OSPF configs and interface configs as well:
SWITCH A:
interface Vlan65
description Connection to DAL-COLO-6509-2
mtu 1580
ip address X.X.X.69 255.255.255.252
no ip redirects
no ip unreachables
ip pim sparse-dense-mode
ip ospf mtu-ignore
mpls label protocol ldp
mpls ip
router ospf 23532
log-adjacency-changes
redistribute connected subnets
redistribute static subnets
passive-interface default
no passive-interface Vlan65
network 10.255.2.3 0.0.0.0 area 0
network X.X.X.69 0.0.0.0 area 0
SWITCH B:
interface Vlan65
description Connection to Bryan-26th-CAT-2
mtu 1580
ip address X.X.X.70 255.255.255.252
no ip redirects
no ip unreachables
ip pim sparse-dense-mode
ip ospf mtu-ignore
mpls label protocol ldp
mpls ip
router ospf 23532
log-adjacency-changes
redistribute connected subnets
redistribute static subnets
passive-interface default
no passive-interface Vlan65
network 10.255.2.2 0.0.0.0 area 0
network X.X.X.70 0.0.0.0 area 0
Any ideas would be appreciated.
Thanks
GregGreg,
Can you explain more about your issue?. When you say MPLS VPN is not coming up, do you mean the ping (or traffic) from CE connected to one 6509 is not traversing the MPLS cloud to otehr CE connected to remote 6509?.
Do you have VRF enabled with respective RT import/export?. Do you have MP-BGP with VPNv4 AF enabled?.
To confirm if basic MPLS is working fine, Can you check if you have LDP neighborship up and running?. Use "show mpls ldp neighbor" to see the session.
Also do a "ping mpls ipv4 <remote-loopback> <mask>" and see if it works?.
-Nagendra -
10.1.3 Migration Issue with data-sources.xml
Hi:
Running into lots of migration issues for an application built in 10.1.3 EA, migrating to 10.1.3. production, mostly in the BC project. Here's one: the database connections built in EA were not carried over to prod, so they needed to get re-built. No biggie. But now the data-sources.xml file in the model project has duplicate entries for my data sources. I have tried directly editting that file and removing the duplicates, but when I go to run my application (ADF Faces & ADF BC) JDeveloper hangs. When I abort JDev and re-start it, the duplicate entries are back in data-sources.xml (and yes, I did save the file after making the changes). It seems that the xml file is built dynamically from definitions stored elsewhere. Where is the source? What will I need to modify to get the changes to take?
Thanks.
Johnny LeeThere is new control over when/whether JDeveloper add/updates your data-sources.xml file for the embedded server. The settings are located here:
Tools | Embedded OC4J Server Preferences | Current Workspace | Data Sources
There are some settings there that control whether/when we update the data-sources.xml -
New Mac! Migrating issue from Tiger to Snow Leopard
I recently bought a new MacBook Pro 15" before I relocated overseas (because I couldn't live without a Mac while I waited for my iMac to be shipped abroad).
During the initial set-up, I used the migration assistant to transfer everything from my iMac (running 10.4) to the MacBook Pro (running 10.6). As expected, the transfer worked perfectly!
Actually, it worked a bit too perfectly because the MacBook Pro now seems to think it is called 'Geoffrey Sharpe's iMac G5'. To make matters worse, I am not yet able to connect to the internet from my apartment so I am writing this from the PC at work.
Is there an account setting somewhere that I will need to change?Geoff, how did you go about the migration? Did you simply connect the two Macs, open the MBP and follow the initial prompts to 'Migrate From Another Mac'?
Or did you use the Snow Leopard DVD and perform a "Restore System from Backup..."? If so, not necessarily a good idea when you are moving from one Mac to another. See the following:
Mac OS X v10.6: Issues after restoring a Mac from a Time Machine backup made with a different Mac
http://support.apple.com/kb/TS3243
Your initial Restore/Migration approach will determine which direction resolving this issue will take. So let us know by answering the questions above. The fact that it thinks it is your iMac points to the possibility that you performed a "Restore System from Backup..." and not a simply migration of your user data and apps. -
Problems setting up my TC. Have just bought new iMac(OS 10.6.8) and TC. I tried to set it up. iMac cannot find it. I have tried direct connection with an ethernet cable to Mac or direct to my wireless router but nothing. Just a flashing orange light. Help for a simpleton please. Have tried reseting TC, but to no avail.
Just updated from 10.6.7 ---> 10.6.8 and had the same issue. Despite having done a clean install from 10.6 and got everything back off my TC, now Time Machine can't find it!
Green light is on, ethernet cable conected, network CP says its conected but nothing. Airport Utility can't find it. Hit reset button, Orange flashing light but still no show in Airport Utility.
But I know its there, as rebooting from 10.6 SL disk shows the backups are still ok?
Hmm, ideas anyone?
SBB -
I have an iPad mini, I am connected to my work wireless connection. My printer also is on the same wireless network, however I am not able to print to my airprint enabled printer through this wireless connection. Is there a way to direct connect to the printer via a cable ?
I am missing something here on the connection. I am thinking possibly a firewall here at work will not allow me to use the airprint function. Help ?There is no support for wired printing.
It is probably a firewall issue, possibly where all inbound communications are blocked. Since you're at work, I'd call your work IT department and find out from them what you can/can't do. -
Hii frnds,
here is the configuration in my router C1841..for the cisco ipsec remote access vpn..i was able to establish a vpn session properly...but there after i can only reach up to the inside interfaces of the router..but not to the lan devices...
Below is the out put from the router
r1#sh run
Building configuration...
Current configuration : 3488 bytes
! Last configuration change at 20:07:20 UTC Tue Apr 23 2013 by ramana
! NVRAM config last updated at 11:53:16 UTC Sun Apr 21 2013 by ramana
version 15.1
service config
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname r1
boot-start-marker
boot-end-marker
enable secret 5 $1$6RzF$L6.zOaswedwOESNpkY0Gb.
aaa new-model
aaa authentication login local-console local
aaa authentication login userauth local
aaa authorization network groupauth local
aaa session-id common
dot11 syslog
ip source-route
ip cef
ip domain name r1.com
multilink bundle-name authenticated
license udi pid CISCO1841 sn FHK145171DM
username ramana privilege 15 secret 5 $1$UE7J$u9nuCPGaAasL/k7CxtNMj.
username giet privilege 15 secret 5 $1$esE5$FD9vbBwTgHERdRSRod7oD.
redundancy
crypto isakmp policy 10
encr 3des
authentication pre-share
group 2
crypto isakmp client configuration group ra-vpn
key xxxxxx
domain r1.com
pool vpn-pool
acl 150
save-password
include-local-lan
max-users 10
crypto ipsec transform-set my-vpn esp-3des esp-md5-hmac
crypto dynamic-map RA 1
set transform-set my-vpn
reverse-route
crypto map ra-vpn client authentication list userauth
crypto map ra-vpn isakmp authorization list groupauth
crypto map ra-vpn client configuration address respond
crypto map ra-vpn 1 ipsec-isakmp dynamic RA
interface Loopback0
ip address 10.2.2.2 255.255.255.255
interface FastEthernet0/0
bandwidth 8000000
ip address 117.239.xx.xx 255.255.255.240
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
crypto map ra-vpn
interface FastEthernet0/1
description $ES_LAN$
ip address 192.168.10.252 255.255.255.0 secondary
ip address 10.10.10.1 255.255.252.0 secondary
ip address 172.16.0.1 255.255.252.0 secondary
ip address 10.10.7.1 255.255.255.0
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
ip local pool vpn-pool 172.18.1.1 172.18.1.100
ip forward-protocol nd
ip http server
ip http authentication local
no ip http secure-server
ip dns server
ip nat pool INTERNETPOOL 117.239.xx.xx 117.239.xx.xx netmask 255.255.255.240
ip nat inside source list 100 pool INTERNETPOOL overload
ip route 0.0.0.0 0.0.0.0 117.239.xx.xx
access-list 100 permit ip 10.10.7.0 0.0.0.255 any
access-list 100 permit ip 10.10.10.0 0.0.1.255 any
access-list 100 permit ip 172.16.0.0 0.0.3.255 any
access-list 100 permit ip 192.168.10.0 0.0.0.255 any
access-list 150 permit ip 10.10.7.0 0.0.0.255 172.18.0.0 0.0.255.255
access-list 150 permit ip host 10.2.2.2 172.18.1.0 0.0.0.255
access-list 150 permit ip 192.168.10.0 0.0.0.255 172.18.1.0 0.0.0.255
control-plane
line con 0
login authentication local-console
line aux 0
line vty 0 4
login authentication local-console
transport input telnet ssh
scheduler allocate 20000 1000
end
r1>sh ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, + - replicated route
Gateway of last resort is 117.239.xx.xx to network 0.0.0.0
S* 0.0.0.0/0 [1/0] via 117.239.xx.xx
10.0.0.0/8 is variably subnetted, 5 subnets, 3 masks
C 10.2.2.2/32 is directly connected, Loopback0
C 10.10.7.0/24 is directly connected, FastEthernet0/1
L 10.10.7.1/32 is directly connected, FastEthernet0/1
C 10.10.8.0/22 is directly connected, FastEthernet0/1
L 10.10.10.1/32 is directly connected, FastEthernet0/1
117.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C 117.239.xx.xx/28 is directly connected, FastEthernet0/0
L 117.239.xx.xx/32 is directly connected, FastEthernet0/0
172.16.0.0/16 is variably subnetted, 2 subnets, 2 masks
C 172.16.0.0/22 is directly connected, FastEthernet0/1
L 172.16.0.1/32 is directly connected, FastEthernet0/1
172.18.0.0/32 is subnetted, 1 subnets
S 172.18.1.39 [1/0] via 49.206.59.86, FastEthernet0/0
192.168.10.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.10.0/24 is directly connected, FastEthernet0/1
L 192.168.10.252/32 is directly connected, FastEthernet0/1
r1#sh crypto isakmp sa
IPv4 Crypto ISAKMP SA
dst src state conn-id status
117.239.xx.xx 49.206.59.86 QM_IDLE 1043 ACTIVE
IPv6 Crypto ISAKMP SA
r1 #sh crypto ipsec sa
interface: FastEthernet0/0
Crypto map tag: giet-vpn, local addr 117.239.xx.xx
protected vrf: (none)
local ident (addr/mask/prot/port): (0.0.0.0/0.0.0.0/0/0)
remote ident (addr/mask/prot/port): (172.18.1.39/255.255.255.255/0/0)
current_peer 49.206.59.86 port 50083
PERMIT, flags={}
#pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0
#pkts decaps: 2, #pkts decrypt: 2, #pkts verify: 2
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 0, #pkts compr. failed: 0
#pkts not decompressed: 0, #pkts decompress failed: 0
#send errors 0, #recv errors 0
local crypto endpt.: 117.239.xx.xx, remote crypto endpt.: 49.206.xx.xx
path mtu 1500, ip mtu 1500, ip mtu idb FastEthernet0/0
current outbound spi: 0x550E70F9(1427009785)
PFS (Y/N): N, DH group: none
inbound esp sas:
spi: 0x5668C75(90606709)
transform: esp-3des esp-md5-hmac ,
in use settings ={Tunnel UDP-Encaps, }
conn id: 2089, flow_id: FPGA:89, sibling_flags 80000046, crypto map: ra-vpn
sa timing: remaining key lifetime (k/sec): (4550169/3437)
IV size: 8 bytes
replay detection support: Y
Status: ACTIVE
inbound ah sas:
inbound pcp sas:
outbound esp sas:
spi: 0x550E70F9(1427009785)
transform: esp-3des esp-md5-hmac ,
in use settings ={Tunnel UDP-Encaps, }
conn id: 2090, flow_id: FPGA:90, sibling_flags 80000046, crypto map: ra-vpn
sa timing: remaining key lifetime (k/sec): (4550170/3437)
IV size: 8 bytes
replay detection support: Y
Status: ACTIVE
outbound ah sas:
outbound pcp sas:hi Maximilian Schojohann..
First i would like to Thank you for showing interest in solving my issue...After some research i found that desabling the " IP CEF" will solve the issue...when i desable i was able to communicate success fully with the router lan..But when i desable " IP CEF " Router cpu processer goes to 99% and hangs...
In the output of " sh process cpu" it shows 65% of utilization from "IP INPUT"
so plz give me an alternate solution ....thanks in advance.... -
I copied all my CD's onto a hard drive. Can I transfer each CD from the hard drive to my iPhone either wirelessly or by direct connection? Do I have to make a playlist for each cd and then transfer it to my iPhone?
When you buy your new iMac you will be able to have the installation process transfer all your applications, data (including music, pictures, documents, etc) and settings to your new computer. In the past that was done via Firewire. I'm not entirely sure of the process with the new iMacs that don't have firewire. I think it can be done via ethernet and probably via tha thunderbolt cord using a firewire adapter but you'll want to check that out.
With the your new computer properly connected to your old computer, the initial booting of the new computer will include the ability to move everything over.
If for some reason you don't want to do that (smart if you have some horrible software issue that is causing problems) you can connect your old computer to the new one and start it in Target Disk mode where it will be seen as a hard drive. You can then manually copy over all your music and import that into iTunes (and any other data you want).
Somebody here will surely point you to directions for connecting an older iMac with no Thunderbolt to a newer iMac with no Firewire. -
Exchange 2013 Migration issues
I have three issues and decided to list them here. Please pick and choose to assist. Thanks in advance.
Environment:
Mixed 2007 SP3 R12 and 2013 CU3. 2007 Environment was webmail.domain.com. I installed new Exchange 2013 (1 CAS, 1 Mailbox) according to:
http://technet.microsoft.com/en-us/library/ff805032(v=exchg.150).aspx. Exchange 2007 is now legacy.domain.com and Exchange 2013 CAS is webmail.domain.com.
Machine 1: Windows 8.1, not domain joined, using Outlook Anywhere external. Outlook 2013
Machine 2: Windows 7, domain joined, using Outlook Anywhere internal. Outlook 2010 SP2
I have migrated 1 user so far to Exchange 2013. This user was a Domain Admin. I have removed that membership. I checked the box to inherit permissions of the security of the object and reset the AdminCount attribute in ADSIedit to 0 and verified this replicated
to all domain controllers. ( I originally thought this to be the issue with it prompting for the password. )
Here is a Get-OutlookAnywhere cmdlet...
ServerName : EXCHANGE2007SVR
SSLOffloading : False
ExternalHostname : legacy.domain.com
InternalHostname :
ExternalClientAuthenticationMethod : Basic
InternalClientAuthenticationMethod : Basic
IISAuthenticationMethods : {Basic}
XropUrl :
ExternalClientsRequireSsl : True
InternalClientsRequireSsl : False
MetabasePath : IIS://EXCHANGE2007SVR.domain.local/W3SVC/1/ROOT/Rpc
Path : C:\WINDOWS\System32\RpcProxy
ExtendedProtectionTokenChecking : None
ExtendedProtectionFlags : {}
ExtendedProtectionSPNList : {}
AdminDisplayVersion : Version 8.3 (Build 83.6)
Server :
EXCHANGE2007SVR
AdminDisplayName :
ExchangeVersion : 0.1 (8.0.535.0)
Name : Rpc (Default Web Site)
DistinguishedName : CN=Rpc (Default Web Site),CN=HTTP,CN=Protocols,CN=EXCHANGE2007SVR,CN=Servers,CN=Exchange
Administrative Group (FYDIBOHF23SPDLT),CN=Administrative
Groups,CN=DOMAIN,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=local
Identity : EXCHANGE2007SVR\Rpc (Default Web Site)
Guid : 4901bb14-ab81-4ded-8bab-d5ee57785416
ObjectCategory : domain.local/Configuration/Schema/ms-Exch-Rpc-Http-Virtual-Directory
ObjectClass : {top, msExchVirtualDirectory, msExchRpcHttpVirtualDirectory}
WhenChanged : 12/31/2013 4:08:04 PM
WhenCreated : 7/18/2008 10:56:46 AM
WhenChangedUTC : 12/31/2013 9:08:04 PM
WhenCreatedUTC : 7/18/2008 2:56:46 PM
OrganizationId :
OriginatingServer : DC1.domain.local
IsValid : True
ObjectState : Changed
ServerName :
EXCHANGE2013SVR
SSLOffloading : True
ExternalHostname : webmail.domain.com
InternalHostname : webmail.domain.com
ExternalClientAuthenticationMethod : Basic
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods : {Basic, Ntlm}
XropUrl :
ExternalClientsRequireSsl : True
InternalClientsRequireSsl : True
MetabasePath : IIS://EXCHANGE2013SVR.domain.local/W3SVC/1/ROOT/Rpc
Path : C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\rpc
ExtendedProtectionTokenChecking : None
ExtendedProtectionFlags : {}
ExtendedProtectionSPNList : {}
AdminDisplayVersion : Version 15.0 (Build 775.38)
Server : EXCHANGE2013SVR
AdminDisplayName :
ExchangeVersion : 0.20 (15.0.0.0)
Name : Rpc (Default Web Site)
DistinguishedName : CN=Rpc (Default Web Site),CN=HTTP,CN=Protocols,CN=EXCHANGE2013SVR,CN=Servers,CN=Exchange
Administrative Group (FYDIBOHF23SPDLT),CN=Administrative
Groups,CN=DOMAIN,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=local
Identity : EXCHANGE2013SVR\Rpc (Default Web Site)
Guid : d983a4b1-6921-4a7f-af37-51de4a61b003
ObjectCategory : domain.local/Configuration/Schema/ms-Exch-Rpc-Http-Virtual-Directory
ObjectClass : {top, msExchVirtualDirectory, msExchRpcHttpVirtualDirectory}
WhenChanged : 1/7/2014 11:29:05 AM
WhenCreated : 12/31/2013 1:17:42 PM
WhenChangedUTC : 1/7/2014 4:29:05 PM
WhenCreatedUTC : 12/31/2013 6:17:42 PM
OrganizationId :
OriginatingServer : DC1.domain.local
IsValid : True
ObjectState : Changed
ISSUE 1
Issue: On Machine 1 (reference above) Windows Security prompt that says "Connecting to
[email protected]". Almost always prompts when Outlook is first opened. Afterwards (if it goes away) seemingly random on when it asks for it. I put in the credentials (absolutely correct) and it fails and prompts again.
I always check the box for it to save the password. To get rid of it, I click the Cancel button at which Outlook reports "NEED PASSWORD", but still acts fine sending and receiving emails. Eventually the "NEED PASSWORD" sometimes changes
to say "CONNECTED", but it works regardless.
No issues on Machine 2 so I don't know where the problem might be as there are a lot of variables in play here.
ISSUE 2
Migrated user is unable to open Public folders from Exchange 2007.
Cannot expan the folder. Microsoft Exchange is not available. Either there are network problems or the Exchange server is down for maintenance. (/o=...).
This error occurs on Machine 1, Machine 2 and from OWA, same error each time.
ISSUE 3
Apps. Installed by default are 4 apps (Bing Maps, Suggested Meetings, Unsubscribe, Action Items). I have made sure the apps are enabled in OWA and they show up in mail items on both Machine 1 (Outlook 2013) and OWA. They do not show up in Machine 2 (Outlook
2010). I'm assuming that isn't supported.
In OWA, when I go to the installed apps listing it shows all of the apps but has a broken link on the image describing the app.
When I click the app in either Outlook 2013 or in OWA, I get "APP ERROR, Sorry we can't load the app. Please make sure you have network and/or internet connectivity. Click "Retry" once you're back online.
Current workaround is just disabling them through OWA.Hello,
In order to avoid confusion, we troubleshoot a issue per thread usually.
For your first isue, I agree with Ed's suggestion to check if your certificate name is correct.
Besides, I recommend you change ExternalClientAuthenticationMethod from Basic authentication to Negotiate authentication to check the result.
For the second issue and third issue, please create a new post.
If you have any feedback on our support, please click here
Cara Chen
TechNet Community Support -
Problem with direct connect on my 8350i
when i try to use my direct connect on my smartphone it beeps and says turn radio on. i can turn the radio on and try again and it says the same thing. when someone dc's my phone i try to answer and it tells me again to turn on radio. called nextel and they said to do a master radio reset and it still didn't work. now they tell me it is a software issue and they can't help me. i need help please.
Hi and Welcome to the Forums!
Wow! Formal support for all BBs is via the carriers...for them to blow you off like that is pretty horrible. I'd suggest contacting them again and push them a little bit more...you have a support agreement with them, if they are not honoring it, escalate with them.
In the meantime, are you on their most recent device OS level? If not, then you might consider updating to see if indeed what they have said holds some kernel of truth. You can check their DL site via this portal:
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
8350i Nextel Direct Connect doesn't work with GM Onstar Bluetooth
Paired my 8350i to my 2009 Chevy Silverado with Onstar and Bluetooth. Can make and receive phonecalls with Bluetooth but Direct Connect cannot. I have to turn off Bluetooth on the 8350i in order to utilize Direct Connect.
I have an 8350i with Nextel, and had similar issues with the Bluetooth in my 2012 Hyundai Accent. Also by accident, I was able to figure out how to work the Nextel. You do need to use the PTT button on the phone as you normally would. (If you try listening in the handset it will not work, the connection to the bluetooth in the car needs to activate.) If someone initiates a PTT conversation with you press the green "pick up call" button on the vehicle's bluetooth. This will cause the bluetooth connection with the vehicle to activate. Then you will be able to hear and speak through the vehicles bluetooth system while pressing and releasing the PTT button as you would if you were using Nextel through the handset.
It is even more awkward if you try placing a PTT call. Hit the green "pick up call" button and even though the bluetooth system will be asking you for verbal commands to initiate a phone call, ignore them and "chirp" the person as you normally would. It will work, not pretty, but it will work. At the end of the call the system will still be asking for verbal commands, but simply hang up.
This worked whether the phone was in vibrate, speaker or not. -
Bridge tables only direct connected to fact table?
I have a dimension BOOKS, and I have to model N:N between BOOKS and their authors. I used a bridge table (checked as it in BI Admin) so my join schema is:
FACT TABLE - BOOKS - BRIDGE_BOOK_AUTHOR - AUTHORS
I created a BOOK dimension with 2 levels, author and book, but when I go to Answers and try the query:
SQL Issued: SELECT AUTHORS.AUTHOR saw_0, FACT_TABLE.MEASURE saw_1 FROM SubjectAREA ORDER BY saw_0
I get the error:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14026] Unable to navigate requested expression: ARCMUL_AUTORE.AUTORE. Please fix the metadata consistency warnings. (HY000)
In his blog: http://gerardnico.com/wiki/dat/obiee/obiee_bridge_table gerardnico says "I was obligated to made only one logical table of the tables Dimension table 1 and Bridge table by using eht join property of the Logical Table Source because a bridge table in OBIEE must be directly connected to the fact table."
Is it right?
I also tried his trick but it doesn't work...For me, it's true ;-)
An easiest other way to model a many-to-many is to use the join property of the logical table :
http://gerardnico.com/wiki/dat/obiee/bi_server/obiee_join_in_lts
Cheers
Nico
Maybe you are looking for
-
My nokia c2-01 restarts itself again nd again at any time while using internet,playing games,or viewing videos,i think there is problem with the operating system,plz let me know what cn i do to cure that fault
-
Hii, We are on Global Catalog Implementation.For a global catalog, we have US users, for certain items there UOM is gallons, for the same items, the european users want in liters can we do the UOM conversion with the OCI Interface BADI BBP_CATALOG_T
-
Local Users (belongs to domain) on ISE cannot derive Password from Windows Database
Dear Support Team We are in the progress of Migrating ACS4.2 to ISE3355 running 1.1.4. We have SSL VPN Users & Wireless Users to be migrated. ISE 1.1.4 is already integrated with AD Windows 2008 and can see all the groups defined on AD. 1: in ACS 4.x
-
No sound when exporting movie to Ipod
I recently got myself an iPod video 30gb and i tried to export a couple music videos to my ipod. I follow the exact instructions on the web site http://www.apple.com/quicktime/tutorials/creatingvideo.html But still when i get the video on my iPod i f
-
Can I transfer music from my ipad to iPod
Can I transfer music from my ipad to my iPod ?