Direct connect won't work since 5.0.0.1051 upgrade

Direct Connect won't work any more since upgrade
Number not in service when somone beeps me
Out of Dispatch range
Try again later
If I reboot phone (battery removed)
Uncaught  Exception
0x9850447e783b0596
application registry
wait for time out

Well, I found something I can live with to make this work.
Using the 5.0.1 desktop... before I connect the Blackberry to synch, I set the Windows 7 default email to Outlook.  Then I synch the calendar.  Then I set the Windows email default back to Thunderbird.  That works.
I can live with this for awhile, but I would hope that eventually the desktop would allow you to synch even if you don't use Outlook email. *sigh*  I really don't need it to synch email at all... and with the amount of spam I'm filtering, trying to cope on the BBerry wouldn't be much fun anyway.

Similar Messages

  • FaceTime won't work since iso 6 updated to Iso 6.

    FaceTime won't work since iso6 update. Every time since I have updated to Iso 6, FaceTime will not work. When I try to FaceTime, after about 30 seconds it tells me that the connection is lost! My iPad is wifi only. Help!!!!!

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet
    http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Programs that require a network connection won't work because there is no virtual IP address available for this session.

    Programs that require a network connection won't work because there is no virtual IP address available for this session.  Per application IP virtualization is enabled.
    There are in fact available IP address's within the dhcp scope.  Before I dig to deep into root cause.. Could the problem be RDS CAL licensing running out, or isn't that not a symptom of my error message?

    Hi,
    Thank you for posting in Windows Server Forum.
    As per my research, there is no any issue related to RDS CAL licensing. Prior to the issue which you are facing, there are some basic setting which need to configure.
    Application Compatibility – Turn on Remote Desktop IP virtualization
    Some applications require a unique IP address, which is by default logically not the case if the application is running on RD Session Host. To solve this issue, Remote Desktop IP Virtualization is introduced. With this setting you enable the IP virtualization
    feature. When enabling this setting you need to specify if the virtual IP is provided per session or per program. When using per program you need to define the executable to which an IP address should be configured. Desktop IP virtualization also needs the
    configuration of the next setting.
    Application Compatibility – Select the network adapter to be used for Remote Desktop IP Virtualization
    When you need to use Remote Desktop IP virtualization configuring this setting is mandatory. You need to specify the IP address of the Network Interface Card which should be used for this feature. Besides the IP address you need also to specify the network
    mask using the slash notation, for example 192.168.77.201/24.
    Application Compatibility – Do not use Remote Desktop Session Host server IP address when virtual IP address is not available
    More information:
    Microsoft RDS Policies explained (Part 2)
    http://www.virtualizationadmin.com/articles-tutorials/vdi-articles/microsoft-hyper-v/microsoft-rds-policies-explained-part2.html
    Configuring Remote Desktop IP Virtualization II
    http://blogs.msdn.com/b/rds/archive/2009/07/15/configuring-remote-desktop-ip-virtualization-ii.aspx
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • HTC DNA Backup Assistant won't work since 1/1/13

    HELP!  No matter what we've done - hard reset and GOT A BRAND NEW HTC DNA - still backup assistant won't work since 1/1/13.  This is NOT anything to do with Facebook.
    This all started with that same 1/1/13 error that so many of you got.  The tech also had me clear the contact storage.  That worked for the error.  But since then I don't have contacts.  I have talked to at least 7 Verizon techs, one HTC tech, then spent 2.5 hours in the Verizon store today.  Ended up with a brand new HTC DNA (mine was only one week old) for free.. and we immediately tried to sync to Backup ASsistant and it still won't work on the new phone.  I have 521 contacts stored online in My Verizon Backup Assistant and they will not, no matter what we try, sync to my phone.  So frustrated.  Anyone else experiencing this?
    ~Tami

    After all my hell- after so many calls and trips to Verizon...as well as getting a new phone..... guess what FINALLY worked: 
    http://www.droidxforums.com/forum/droid-x-faqs/10144-migrating-contacts-phone-backup-assistant-google-contacts.html
    Now I finally see ALL my contacts in "people" when I select my phone icon and people.  But now I'm trying to test it out by composing a new text message and all these people aren't showing up there.  Does it just take a lot of time!?!?  Since I did import 524 contacts from BUA to Google?... will it just take time for these contacts to be available for me to text!?!?  HELP.. (again).

  • Lighting effect won't work since downloading photoshop cc.

    lighting effect won't work since downloading photoshop cc.....i use a 1 yr old alienware laptop so am sure the graphics card is plenty robust enough.  any ideas?

    Hi,
    Can you post your info from here: Help> System Info...
    regards,
    steve

  • FaceTime won't work since ios7 installed

    FaceTime won't work since iOS 7 got installed. Settings have not changed.

    powercycly and keep trying, it will let u get through eventually.

  • My itunes store won't work since upgrade to version 8.0

    My itunes store will not work since I upgraded to v8 I don't know what the problem is. Can someone please help me!!

    The #1 culprit for that is Norton security software.
    Here are Norton directions
    http://service1.symantec.com/SUPPORT/nip.nsf/0/7fb6e478e2a1abf78825708b00558625? OpenDocument&seg=hm&lg=en&ct=us
    If you don't have Norton, check whatever other firewall/security software you are using.

  • HP Director software won't work since I installed Linksys Wireless Print Server

    I have an HP 5510 Office Jet all in one.  It comes with bundled software called HP Director that enables scanning, printing, and faxing.  The software worked fine while I had the printer connected to my pc with a USB cable.
    To give myself flexibility I installed a WPSM54G Linksys Wireless G Printserver.  There is no direct connection between my printer and pc anymore.
    Printing still works fine.  This is being handled by the Linksys software.
    The HP Director no longer can find the printer.  When I try to scan (for example) using HP Director, I get a message that "an error occurred communicating with the printing device...".  It presumably is looking for a direct USB connection, and not finding one.
    I can't find a fix on the HP site, but I imagine there must be one.  Wireless print servers have been around for quite a while.  Is there a download that will solve this problem?
    Thanks for your help.

    kts0347 wrote:
    ...My printer interfaces wirelessly through my print server.  So, HP Director doesn't see the printer, and fails to run the tasks it is offered for - scanning, photos, faxes....
    Exactly my point.  These services: scanning, photos and faxes will never work through a print server.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • 8350i Nextel Direct Connect doesn't work with GM Onstar Bluetooth

    Paired my 8350i to my 2009 Chevy Silverado with Onstar and Bluetooth. Can make and receive phonecalls with Bluetooth but Direct Connect cannot. I have to turn off Bluetooth on the 8350i in order to utilize Direct Connect.  

    I have an 8350i with Nextel, and had similar issues with the Bluetooth in my 2012 Hyundai Accent.     Also by accident, I was able to figure out how to work the Nextel.  You do need to use the PTT button on the phone as you normally would.  (If you try listening in the handset it will not work, the connection to the bluetooth in the car needs to activate.)   If someone initiates a PTT conversation with you press the green "pick up call" button on the vehicle's bluetooth.   This will cause the bluetooth connection with the vehicle to activate.   Then you will be able to hear and speak through the vehicles bluetooth system while pressing and releasing the PTT button as you would if you were using Nextel through the handset. 
    It is even more awkward if you try placing a PTT call.   Hit the green "pick up call" button and even though the bluetooth system will be asking you for verbal commands to initiate a phone call, ignore them and "chirp" the person as you normally would.  It will work, not pretty, but it will work.  At the end of the call the system will still be asking for verbal commands, but simply hang up.  
    This worked whether the phone was in vibrate, speaker or not.  

  • Musicapp, speaker and volume control won't work since updated to iOS 7.1

    Since I updated my iPhone 4 to iOS 7.1 my iPhone works faster than iOS 7. But some apps like musicapp, youtube have no volume control and the speakers won't work. When somebody call me the iPhone rings normally. I tried turn off bluetooth because I thought the iPhone will conect to my car. I pressed the lock and homebutton for reseting, I deletetet my whole iPhone and installed iOS7.1 again - nothing changed. Only when i plug in my earphones everything will work as normal.

    Hi AmishCake!
    Thanks for your tipp! i cleaned the headphone port and usb-port and reinserted the plug several times!
    i think this isn't the problem!
    here i prepared a picture how the screen looks like when i plug in my headphones!
    https://www.dropbox.com/s/omi3hlp1zzyx43k/Foto%2026.03.14%2013%2017%2040.png
    it seems to be a problem of the update to 7.1 because some guys posted the same problem on other sites.
    sorry for my bad english and thank you for trying to solve my problem!

  • My scrollbar on my mouse pad on my laptop won't work since I downloaded the 4.0 version. I tried what some other people tried but I still can't get it to work.What can I do to fix it?

    I just download the 4.0 version and my scroll pad on my laptop won't work. I have to use my arrow keys or the side bar on the side. The scroll pad works with Internet Explorer and anywhere else just not with Firefox's newest version.

    This one is easy. The shortcut is for the old iTunes, that is why it won't work.
    I assume you are using Windows.
    If so, go to the bottom left of your screen and click the start button. Go up to programs and hold your cursor over it. A list of all your programs should pop up to the right. Move the curso over to iTunes. There should be an "about iTunes" and an iTunes logo there. Right click on the iTunes logo and click create shortcut (you can also just drag it out to your desktop). That will give you a desktop shortcut for your new version.

  • Remote Desktop Connection won't work from Leopard to Windows XP

    Hi, folks:
    I'm unable to connect to my work XP computer via my home iMac (Leopard 10.5.7) using Microsoft's Remote Desktop Connection for Mac. The XP settings are correct, I'm connected on my work network VPN, and I don't believe I have any router firewalls causing the problem --- the reason I know this is because I also have an MacBook running Tiger (10.4.11) and it has been connecting to my work PC without any problems. So, this must be a Leopard firewall setting?
    As far as that goes, on my iMac I've got Screen Sharing, Remote Login and Internet Sharing turned on. Again, work network VPN is on.
    I'm getting this error from Remote Desktop Connection:
    "The Mac cannot connect to the Windows-based computer
    This problem can occur if:
    - The Windows-based computer is not set up to accept remote connections
    - The Windows-based computer is not turned on
    - The Mac, or the Windows-based computer is experiencing network problems
    Try connecting to the Windows-based computer again, or contact your administrator"
    Anyone know of a fix? I'd greatly appreciate it!
    Thanks.

    What Firewall setting do you have on your Mac? Try setting it to allow all connections. At least as an experiment.
    Do you have any Proxies set in System Preferences -> Network -> Advanced -> Proxies? If yes, then is it possible that "Bypass" list is not covering the XP system.

  • My Seagate external drive won't work since I downloaded Yosemite

    My Mac recognizes my Seagate external drive but it doesn't work since I downloaded Yosemite.

    Yosemite  is not a Classic operating system.  See where to post here:
    Site map of Communities and Categories
    Also you may find this tip useful:
    WD, Seagate, and Toshiba drives

  • External drives won't work since upgrading to Lion.

    This is a really frustrating problem.  I have two portable external hard drives that have both ceased to work ever since I upgraded to 10.7.  These are both used for large video files and I need them to work as they have some important stuff on them.
    One is a 1TB WD MyPassport, USB connection.
    The other is a 500GB Seagate FreeAgent, FireWire 800 connection. 
    The drives are both giving me the same weird phenomenon:
    I plug them in, and they'll boot up--sometimes right away, sometimes after several minutes--but then they make my Finder worthless.  The files won't preview in Cover Flow, and expanding a folder takes forever. When I try opening a video file in QuickTime, I end up with the beach ball of death.  I try restarting the computer, but I can't even do that because "Finder (Not Responding)."
    So I tried manually shutting down by holding down the power button.  When I restarted the computer with the drive attached, the Finder wouldn't launch.  The dock would appear, but no icons on my desktop whatsoever.  When I unplug the drive, once again hold down the power button to shut down, and restart without the drive attached, everything boots up just fine.
    If anyone has experienced this, please help ...

    Open Disk Utility, select the external disk in the sidebar and verify the disk. If there's an issue with them, repair the disks

  • [SOLVED]NetworkManager won't work since updating to KDE 4.3.4

    Hello there,
    I'm running Arch64 on Qosmio X300 notebook. I have just updated to KDE 4.3.4 and since the update the NetworkManager won't connect to my wifi (I haven't tried wired yet). I use following packages for NetworkManager and KNetworkManager applet
    kdeplasma-applets-networkmanager 1047027-1
    networkmanager 0.7.2-1
    There seems to be nothing strange in the daemons.log, but the KNMgr tray icon keeps saying "Networking information not available" and when I click it I get "Network Management Disabled" instead of the usual menu. I still can configure network manually and wicd is also working fine.
    I remember putting my notebook to suspend-to-disk by mistake instead of shutting it down right after the update, so that's when it might have gone crazy. I tried reinstalling NetworkManager and the KDE applet and googling around a bit, but nothing has helped so far...
    Last edited by MadCat_X (2009-12-02 18:34:55)

    NM is definitely running, "ps aux | grep Network" gives me
    root 1573 0.0 0.0 61976 3876 ? Ss 01:35 0:00 /usr/sbin/NetworkManager
    root 1589 0.0 0.0 68868 3176 ? S 01:35 0:00 /usr/sbin/nm-system-settings --config /etc/NetworkManager/nm-system-settings.conf
    madcat 1849 0.0 0.0 8360 976 pts/2 S+ 01:36 0:00 grep Network
    I tried uninstall -reinstall method, but the plasma applet still sticks to the "Networking information not available" message.
    This is how the NM related info in daemon.log looks like
    Dec 2 01:35:34 Qosmio-X300 NetworkManager: <info> starting...
    Dec 2 01:35:34 Qosmio-X300 NetworkManager: <WARN> nm_generic_enable_loopback(): error -17 returned from rtnl_addr_add():
    Dec 2 01:35:34 Qosmio-X300 NetworkManager: <info> Found radio killswitch /org/freedesktop/Hal/devices/pci_8086_4232_rfkill_phy0_wlan
    Dec 2 01:35:34 Qosmio-X300 NetworkManager: <info> Trying to start the supplicant...
    Dec 2 01:35:34 Qosmio-X300 NetworkManager: <info> Trying to start the system settings daemon...
    Dec 2 01:35:35 Qosmio-X300 nm-system-settings: Loaded plugin keyfile: (c) 2007 - 2008 Red Hat, Inc. To report bugs please use the NetworkManager mailing list.

Maybe you are looking for