Direct Dial Widget does not work

After adding several direct dial widgets to my home screen I noticed none of them work. You press the widget, the top notification bar turns Turquoise "same color as the phone app background" and a spinning "thinking" wheel appears for a few seconds. Nothing happens after. I have deleted the widget and re-made them numerous times. Any ideas?

Well that is great news! When a phone is in Safe Mode, it disables all 3rd party applications. Since your widget works in Safe Mode, all we need to do is remove the affecting 3rd party application. I would recommend uninstalling all 3rd party apps that were added on right before your widget stopped working. If your not sure what app might be causing this a Factory Reset is recommended http://vz.to/1qxiwgX to remove all 3rd party apps from the phone. I do recommend backing up all your information before you do this step. You can use Verizon Cloud http://vz.to/1qxj1HQ to store your media. Please keep us posted with your progress!
SandyS_VZW
Follow us on Twitter @VZWsupport

Similar Messages

Some Widget does not work after latest upgrade

Today is July 23rd, 2011. By recent latest upgrade, mainly for supporting Lion, where I am still using Snow Leopard 10.6.8, some widget does not work, including Battery Meter, Digital Clock Alarm, Victoria Digital Clock, etc.
By the way, my company use Chatter and I installed Chatter Desktop. Again, after recent upgrade, it no longer work anymore.
Do you experience the same problem?
For those who has upgraded to Lion, do you also find some widget does not work?

I have read a couple of complaints like that, but not sure it's widespread.
At this point I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
If that does NOT help, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
Then move these files to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.
If that does NOT help then I suspect the optical drive or media itself, or possibly just needs a cleaning CD run on it.

Air Traffic Control Widget Does Not Work With OS 10.6.8

Air Traffic Control Widget Does Not Work With OS 10.6.8.
Any suggestions?
SR

No I have not. I have thought about just downloading another version...
Thanks for your reply.
SR

[Solved] Awesome 3.5: gmail vicious widget does not work

I updated my awesome from 3.4 to 3.5. I noticed that vicious.widgets.gmail does not work anymore. When I move my cursor on mailicon, I can only see N/A. Obviously in my home there is ~/.netrc file:
machine mail.google.com login MYMAIL password MYPASSWORD
This is how I configured the widget: Solved someone this or has someone any idea about how to solve?
-- Gmail
mailicon = wibox.widget.imagebox(beautiful.widget_gmail)
mailwidget = wibox.widget.textbox()
gmail_t = awful.tooltip({ objects = { mailwidget },})
vicious.register(mailwidget, vicious.widgets.gmail,
function (widget, args)
gmail_t:set_text(args["{subject}"])
gmail_t:add_to_object(mailicon)
return args["{count}"]
end, 120)
--the '120' here means check every 2 minutes.
mailicon:buttons(awful.util.table.join(
awful.button({ }, 1, function () awful.util.spawn("urxvt -e mutt", false) end)
Bye! ^^
Last edited by ninquitassar (2013-02-17 20:22:28)

nostalgix wrote:
I don't know for sure, but maybe it's
mailicon = wibox.widget.imagebox(beautiful.widget_gmail)
instead of
mailicon = wibox.widget.imagebox()
mailicon.set_image(beautiful.widget_gmail)
That's what he has.
Last edited by nomorewindows (2013-02-12 21:16:51)

CODE ADDED using HTML Snippet Widget does not work

I am trying to add some code to a web page using the HTML Snippet widget and it does not work on my page. the code is as follows:
<script src='http://adn.ebay.com/files/js/min/ebay_activeContent-min.js'></script>
<script src='http://adn.ebay.com/cb?programId=1&campId=5336536214&toolId=10026&keyword= coinset+nationaruba&catId=11116&width=728&height=90&font=1&textColor=333366&linkColor=333333&a rrowColor=8BBC01&color1=B5B5B5&color2=FFFFFF'></script>
Can anyone help me to get this to work?
Thanks!
Gregg

I got this code from Ebay. It is an Ebay partner link.
Gregg

Marketplace widget does not work after update

Updated phone (Droid X) this morning (10-24-10). Seemed to go fine until I clicked on what was supposed to be the marketplace widget. It said something to the effect that the application was not installed. The usual Icon was replaced by a blue icon with the settings "cog" on the right side. Is there anyway to get the Marketplace widget back? By the way, it also does not show up in the application window or in the "Manage Applications" list. I have temporarily put a shortcut to the internet Marketplace on the home page.

This is a common issue after update.
There is only 2 ways I know that seem to work.
1. Reinstall app from a market backup apk (EStrong File Explorer works well)
2. Hard Reset on device.
Reset works but use the method here.... http://community.vzw.com/t5/DROID-X-by-Motorola/Minimize-Droid-X-Issues-After-Froyo-Update/m-p/296586#M11211 or
Follow these settings during restore to avoid issues being restored automatically.
1. Go to homepage on device
2. Click left menu hard button
3. Select Settings from list (Bottom Right of Screen)
4. Scroll to "Privacy" in list
5. Select "Privacy"
6. Uncheck "Automatic Restore" and then "Back up my data" under Settings/Privacy
7. Click OK on the menu that pops up that says "Are you sure you want to stop bacing up your settings andapplication data and erase all copies on Google server?"
8. Click Factory Data Reset
9. Click Reset Phone
10. After reset is complete follow step to setup but do not input Google Email information
11. Once phone is at homepage go back into Settings/Privacy and make sure the Automatic Restore option is unchecked, even if grayed out, activate "Back up my data" and quickly disable "Automatic Restore"
5. After being sure that the Automatic Restore option is off it will be safe to log into Google by going to My Accounts and press New account button at bottom and input email account information.
This process will stop all applications and settings from restoring automatically and restoring original issues that usually resolve a number of issues.

Date Picker Widget does not work on template spawned (copied) pages

Hi,
I am trying to set up a PDF document form for a client using Adobe Acrobat Pro XI. I have several date fields where I am wanting to use the Form Router Date Picker Widget (which has been downloaded and installed). This works perfectly fine when it is just one page. However, I am using a template with a script that creates a copy of the first page activated from a button -- ideally to allow users to create however many pages they want before submitting everything. The code from the button is as follows:
var myTemplateArray = this.templates;
var myTemplate = myTemplateArray[0];
myTemplate.spawn(this.numPages, true, false);
// Get the field name prefix that Acrobat automatically adds to the new fields
var f_prefix = "P" + (this.numPages - 1) + ".cvcIntake";
// Reset the newly created fields
this.resetForm([f_prefix]);
// Go to the new page
this.pageNum = this.numPages-1;
The problem begins when a new page is added. If I try to click on the date picker on the second page, it shows up on the first page next to the same field that was copied. And if a date is selected it is entered into the field on the first page.
In looking into what is going wrong I found several things. First, the naming aspect on the copied page is creating all of the calendar objects with the prefix "P1.cvcIntake.fld" ("fld" is the prefix of the form fields on the first page). Second, going to the properties of the date picker object, its name has been changed to "P1.cvcIntake.FR_00000_CALENDARBUTTON_fld.Start_Date" and that action code is:
FormRouter_PlaceCalendar(getField("fld.Start_Date"), 3, "yyyy-mm-dd", 18.61102294921875);
Obviously both the name and the action code are going to cause it to do what it is doing now. Unfortunately I am not sure what to try to do to fix things, as my skills at writing code for Acrobat is probably just a little better than beginner. It seems to me that I need to be using a completely different approach for this part. Does anyone have any advice on how I might be able to manage this problem?
Thanks ahead for your time and consideration,
Mike

It took quite a while for me to solve this problem, but even longer to post it here (my apologies to anyone looking for a solution to it prior to now). Anyway, the real trick for me was to discover that I didn't have to explicitly put any numbering notations after adding the new fields (such as + "#" + this.pageNum) -- it turns out that the proper notational numbering is handled automatically.
While I am sure the real pros out there might be able to find a lot of ways to handle certain aspects better, below is the result of a great many hours of research, trial and error, and persistence. Considering the help I have received from this forum, I would be thrilled if I could make a contribution that helps anyone solve this problem. If so, I would be glad to hear from you! In any case, if anyone has any comments or questions please let me know.
// Get templates in array.
var aTemplates = this.templates;
var myTemplate = aTemplates[0];
// Spawn new form page to end using page renaming.
myTemplate.spawn(this.numPages, true, false);
// Get the field name prefix that Acrobat automatically adds to the new page fields.
var fldNamePrefix = "P" + (this.numPages - 1) + ".cvcIntake";
// Reset the newly created fields to be cleared of any data.
this.resetForm([fldNamePrefix]);
// Init array counter for found calendar fields.
var calFldsCnt = 0;
// Array for found unusable copied calendar fields.
var aCvcIntakeCalFlds = [];
var pageCnt = this.numPages-1;
// Loop through all fields.
for (var i=0; i<this.numFields; i++) {
   var f = this.getField(this.getNthFieldName(i));
   var aNameSlice = f.name.split(".");
   // Find all copied template-renamed calendar fields and save names in array.
   if ((aNameSlice[1] == "cvcIntake" && aNameSlice[2] == "FR_00000_CALENDARBUTTON_fld") || ((aNameSlice[1] == "cvcIntake" && aNameSlice[2] == "FR_00000_Calendar"))) {
      aCvcIntakeCalFlds[calFldsCnt] = f.name;
      calFldsCnt++;
      continue;
   // Skip template-renamed fields.
   } else if (aNameSlice[1] == "cvcIntake") {
      continue;
   // Find non-button calaendar fields to create copy for new page.
   if (aNameSlice[0] == "FR_00000_Calendar") {
      var calFieldsName = aNameSlice[0] + "." + aNameSlice[1];
      var calField = this.addField(calFieldsName, f.type, pageCnt, f.rect);
      var t = this.getField(calFieldsName);
      // Copy non-function proprties of page 0 calendar fields.
      for ( var p in f ) {
         try {
            if ( typeof f[p] != "function" ) {
               if (p != "name" || p != "page" || p != "rect" || p != "type") {
                  t[p] = f[p];
         } catch(e) {}
      // Default all to hidden.
      t.display = display.hidden;
      // Set "CalendarMonth" items as they are on page 0.
      if (aNameSlice[1] == "CalendarMonth") {
         var aMonths = new Array(["January", "1"],
            ["February", "2"],
            ["March", "3"],
            ["April", "4"],
            ["May", "5"],
            ["June", "6"],
            ["July", "7"],
            ["August", "8"],
            ["September", "9"],
            ["October", "10"],
            ["November", "11"],
            ["December", "12"]);
         t.setItems(aMonths);
      // Copy button captions.
      if (f.type == "button") {
         t.buttonSetCaption(f.buttonGetCaption());
      // Set action for all calendar "Day_X" fields.
      if (calFieldsName.indexOf("Day_") > 0) {
         t.setAction("MouseUp","FormRouter_SetCurrentDate(event.target.buttonGetCaption());");
   // Find page 0 calendar buttons and make new page copies.
   if (aNameSlice[0] == "FR_00000_CALENDARBUTTON_fld") {
      var calButtonName = "FR_00000_CALENDARBUTTON_P" + pageCnt + ".cvcIntake.fld." + aNameSlice[1];
      var calButton = this.addField(calButtonName, f.type, pageCnt, f.rect);
      var t = this.getField(calButtonName);
      // Copy non-function proprties of page 0 calendar buttons.
      for ( var p in f ) {
         try {
            if ( typeof f[p] != "function" ) {
               if (p != "name" || p != "page" || p != "rect" || p != "type") {
               t[p] = f[p];
         } catch(e) {}
      // Get button icon copy.
      t.buttonSetIcon(f.buttonGetIcon());
      // Set up variable name for button action that call calendar activation.
      var dateFieldName = "P" + pageCnt + ".cvcIntake.fld." + aNameSlice[1];
      t.setAction("MouseUp","FormRouter_PlaceCalendar(getField(" + "\"" + dateFieldName + "\"" + "), 1, \"mm\/dd\/yyyy\", 0);");
// Go through array of captured non-usable template-copied calendar fields and buttons, removing each from page.
for (i=0; i<=aCvcIntakeCalFlds.length; i++){
   this.removeField(aCvcIntakeCalFlds[i]);
// Go to the new page
this.pageNum = pageCnt;

My iTunes album discovery widget does not work properly.

Hi,
I wanted to use the iTunes album discovery widget from apple.com for my website to promote a new release of mine. While the widget will take you to my iTunes page when you click on view, it will not play audio when one presses play on the song selection of the widget at my website. The play and stop feature seem to work, but no sound. I put in some major acts into the widget and I had the same issue. I contacted Apple and they told me they are not responsible for their widgets and to find someone who knows more about them possibly so here I am.
http://widgets.itunes.apple.com/builder/
Thanks,
missingsock

http://www.woodshampoo.net/ is my link to see the widget on my webpage music page
missingsockout

Printing Directly To Printer Does Not Work

Dear Friends,
We have a label report that can only be printed when it has been previewed first.
However, printing this report directly to the selected printer raises the error message ' Protocol Error' and printing stops.
What could be the problem and how can that be resolved ?
Thank you in advance for your help.

Hello Bhushan,
Thank you for the reply.
Version os CR with SP level.
The report was designed with SAP Crystal Reports 2011 and the version of the runtimes currently deployed is CRforVS_redist_install_32bit_13_0_8.
Version of VS
Version of Visual Studion is 2010.
Win or web app?
It is a Windows application.
Report is printed using code or viewer print button?
The report is printed via code.
What is the exact error, post the stack trace?
The exact error is simply 'Protocol Error' on the printer display.
Does the issue occur on dev or production machine?
The error occurs on a Production environment.
Is this printer specific?
Yes, the exact printer in use is CAB A4+/300.
Could you print the report to PDF printer or MS XPS writer?
The report can be printed directly to PDF or MS XPS writer without any error. It's just to this printer where the error occurs.
I will be glad to provide more information if needed.
Thank you.

TS1702 Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a

Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a blur.

Do you have a question? This is a user to user help forum. Apple is not here only other users like yourself. You don't report problems to Apple here.
By the way, it might help if you indicated where you are located.
To complain to Apple use http://www.apple.com/feedback/ipad.html

I look for integrated in the legend bloc of diaporama, a widget such as "Accordion" for, with a click, or passing with mouse, open a new legend for each photo. I tried with "Accordion" of Muse, it does not work. I tried copy/paste, mais no result. The wid

Question.
I look for integrated in the legend bloc of diaporama, a widget such as "Accordion" for, with a click, or passing with mouse, open a new legend for each photo. I tried with "Accordion" of Muse, it does not work. I tried copy/paste, mais no result. The widget disappear in bloc legend. disparaître. Have you one solution?
Thank you,
Loïc

Accordion or Tabbed panel should to it, with click and open container.
Please provide site url where this does not work, also if you can provide an example where we can see the exact action then it would help us.
Thanks,
Sanjit

Fast dial (visual bookmarks) does not work with the new 5.0 upgrade. How do I correct this issue

fast dial (visual bookmarks) does not work with the new 5.0 upgrade. How do I correct this issue Asked this question yesterday. I desperately need info, will I ever be able to use fast dial again?

I tried it and it WORKED....I even tried the other version BEFORE this one and it didn't work so I tried yours and it worked like a charm so THANKS brother....

You must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

you must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

I tried to answer in your other post.. please stick to one thread ..
What method of internet do you have.. is this fibre install.. if so the TC should just plug in and use dhcp in router mode.. press and hold the reset and it will go back to router mode by default.

I bought Adobe Elements 12; I cannot use panorama photomerge, I have followed the directions to go to Full Edit mode in edit workspace choose File New Photomerge. However the Photomerge does not work, it does not respond. The only thing I can come u

I bought Adobe Elements 12; I cannot use panorama photomerge, I have followed the directions to go to Full Edit mode in edit workspace> choose File> New> Photomerge. However the Photomerge does not work, it does not respond.
The only thing I can come up with is that I found a blog that said that in the Trial version Photomerge does not work, however I do Not have the Trial version, I did at one time but I purchase Adobe Elements. Thank you.

The blog was incorrect. Photomerge should work in the trial, too.
When things get weird in PSE the first thing to do is to delete the prefs. Go to the editor preferences>general, click this button and restart the editor:

Widget Browser Does Not Work

I have the Adobe CC Suite and Dreamweaver CS5.5 and everything is included, however whenever I'm making a webpage and I'm trying to use the widget browser it does not work. I have tried re-installing Dreamweaver and the wideget browser and it does not work, I am signed into Adobe Exchange and everything. I looked at all the other forums about this and none of thos solutions worked out for me. I also could not find the Widget Browser forum so I posted it here because they are intergrated!
And help would be great!
Thanks!

You don't need a widget for this. HTML5 <video> is a web standard supported by all modern browsers/devices. Simply copy & paste the following code into a new, blank document. Change sample videos to your own.
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>HTML5 with Video</title>

</head>
<body>

<video width="500" height="325" poster="Your_poster_image.jpg" controls>

<source src="http://techslides.com/demos/sample-videos/small.webm" type="video/webm">
<source src="http://techslides.com/demos/sample-videos/small.ogv" type="video/ogg">
<source src="http://techslides.com/demos/sample-videos/small.mp4" type="video/mp4">
NOTE: If you see this, you're using an
outdated browser that doesn't support
the video tag. </video>

</body>
</html>
Nancy O.

Direct Dial Widget does not work

Similar Messages

Maybe you are looking for