Direct Input via BDT?

Does anyone know, what exactly the transactions 'BUTI' or 'BUTJ' are doing? I'm actualy searching for a starting point to migrate (non sap) business partner informations via BDT. Can someone give me a hint?
Thanks

Michael,
Just for future reference, this is the Customer Relationship Management forum not the ERP(R/3) forum. I would recommend posting your question in the ABAP forum, or the ERP forum, as this forum strictly concentrates on CRM system issues. You will also need to provide more details on what type of business partners you are trying to load, since data conversion to an ERP system is a very established practice and someone should be able to give you the right hints on how to load the data.
Thus my answer was aimed at solving a CRM data load issue and not ERP issues.
Good luck,
Stephen

Similar Messages

How to extend WM view for materail masterial via direct input?

Hi,
Currently I'm using LSMW + Recording to extend warehouse management view of material master, but I found that it's not so good,
My question is, how to use Direct Input in LSMW to extend warehouse management view of material master? As I don't know how to use direct input, kindly please advise.
Thanks a lot!

Hi Ashok,
Thanks a lot for your advice.
I tried to use MM50 but no materials can be found, as these materials are totally new when WM go alive, the warehouse management view is not active yet so MM50 can not found any data need to be extended, so is there any method to solve this problem of MM50?
Kindly please advise again.
Thanks.

Using Direct Input mode: UTF-8 character encoding assumed

When I validate a web page in dreamweaver CS5 (using Jeffrey Zeldman's Web Standards Advisor ) I receive the following warning; Using Direct Input mode: UTF-8 character encoding assumed.
However if I validate using W3C either as a file upload or via the live site the page validates correctly.
Can anybody please help, as it is driving me insane.

Hi John
Thank you for your swift response,
As I said before this only happens locally within Dreamweaver CS5.
However The web address is www.countryimage.co.uk/index.htm
As you will see from the code I have included <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> within the head

LSMW - Direct Input

Hi Pals,
We are using the standard direct input pgm RCSBI010 for creation on BOMs using an LSMW. However, when we are giving multiple BOM components in our file for a single header, each component is getting created separately. But this is not the case that we want. We want all the BOM components given in the file for a single header to be created for a single BOM itself. We are using the transaction CS01 to acheive this.
When I checked the LSMW, the target field for this BOM COMPONENT is IDNRK. However to enter multiple BOM line items I would require it to be something like IDNRK(01). But I am not sure if this is a right analysis.
If any of you have an idea how to handle this, please provide your valuable inputs.
Regards,
Gayathri N.

Hai Gayatri
Check the following LSMW Steps
Using Tcode MM01 -- Maintain the source fields are
1) mara-amtnr char(18)
2) mara-mbrsh char(1)
3) mara-mtart char(4)
4) makt-maktx char(40)
5) mara-meins char(3)
the flate file format is like this as follows
MAT991,C,COUP,Srinivas material01,Kg
MAT992,C,COUP,Srinivas material02,Kg
AMT993,C,COUP,Srinivas material03,Kg
MAT994,C,COUP,Srinivas material04,Kg
MAT995,C,COUP,Srinivas material05,Kg
goto Tcode LSMW
give Project Name
 Subproject Name
 object Name
Press Enter -
Press Execute Button
It gives 13 radio-Button Options
do the following 13 steps as follows
1) select radio-Button 1 and execute
 Maintain Object Attributes
select Standard Batch/Direct Input
 give Object -- 0020
 Method -- 0000
 save & Come Back
2) select radio-Button 2 and execute
 Maintain Source Structures
 select the source structure and got to click on create button
 give source structure name & Description
 save & Come Back
3) select radio-Button 3 and execute
 Maintain Source Fields
 select the source structure and click on create button
 give
 first field
 field name matnr
 Field Label material Number
 Field Length 18
 Field Type C
 Second field
 field name mbrsh
 Field Label Industrial Sector
 Field Length 1
 Field Type C
 Third field
 field name mtart
 Field Label material type
 Field Length 4
 Field Type C
 fourth field
 field name maktx
 Field Label material description
 Field Length 40
 Field Type C
 fifth field
 field name meins
 Field Label base unit of measurement
 Field Length 3
 Field Type C
save & come back
4) select radio-Button 4 and execute
 Maintain Structure Relations
 go to blue lines
 select first blue line and click on create relationship button
 select Second blue line and click on create relationship button
 select Third blue line and click on create relationship button
save & come back
5) select radio-Button 5 and execute
 Maintain Field Mapping and Conversion Rules
 Select the Tcode and click on Rule button there you will select constant
 and press continue button
 give Transaction Code : MM01 and press Enter
 after that
 1) select MATNR field click on Source filed(this is the field mapping) select MATNR and press Enter
 2) select MBRSH field click on Source filed(this is the field mapping) select MBRSH and press Enter
 3) select MTART field click on Source filed(this is the field mapping) select MTART and press Enter
 4) select MAKTX field click on Source filed(this is the field mapping) select MAKTX and press Enter
 5) select MEINS field click on Source filed(this is the field mapping) select MEINS and press Enter
finally
save & come back
6) select radio-Button 6 and execute
 Maintain Fixed Values, Translations, User-Defined Routines
 Create FIXED VALUE Name & Description as MM01
 Create Translations Name & Description as MM01
 Create User-Defined Routines Name & Description as MM01
 after that delete all the above three just created in the 6th step
 FIXED VALUE --MM01
 Translations --MM01
 User-Defined Routines --MM01
 come back
7) select radio-Button 7 and execute
 Specify Files
 select On the PC (Frontend) -- and click on Create button(f5)
 give the path of the file like "c:\material_data.txt"
 description : -
 separators as select comma radiao- button
 and press enter save & come back
8) select radio-Button 8 and execute
 Assign Files
 Save & come back
9) select radio-Button 9 and execute
 Read Files
 Execute
 come back
 come back
10) select radio-Button 10 and execute
 Display Imported Data
 Execute and press enter
 come back
 Come back
11) select radio-Button 11 and execute
 Convert Data
 Execute
 come back
 Come back
12) select radio-Button 12 and execute
 Display Converted Data
 Execute & come back
13) select radio-Button 13 and execute
 Start Direct Input Program
 select the Program
 select continue button
go with via physical file
give the lock mode as 'E'
and execute
BOM Explosion
/people/prakash.singh4/blog/2005/05/15/explode-boms-in-enterprise-portal-using-htmlb-tree--part-1-abap
BOM
http://help.sap.com/saphelp_erp2005/helpdata/en/ea/e9b7234c7211d189520000e829fbbd/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/d1/2e4114a61711d2b423006094b9d648/frameset.htm
http://www.sap-img.com/sap-sd/sales-bom-implementation.htm
http://www.sap-basis-abap.com/sappp007.htm
LSMW
http://www.sap-img.com/sap-data-migration.htm
http://www.sapgenie.com/saptech/lsmw.htm
http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf
http://www.sap.info/public/INT/int/glossary/int/glossaryletter/Word-17643ed1d6d658821_glossary/L#Word-17643ed1d6d658821_glossary
Thanks & regards
Sreenivasulu P
Thanks & regards
Sreeni

Internal PLNNR assignment in Routing (Direct input RCPTRA02)

Hi all,
i finally managed to complete my multiple structure lsmw to create routings via direct input RCPTRA02 program. The only thing i want from SAP now is to assign plan numbers internally. i dont want to give a plannumber for each routing i create, and besides, there's so much data that i can't find logical plan numbers for all those materials.
Can anyone explain how i can make my RCPTRA02 lsmw assign the plannr internally? In change of each material, i want system to create a new plan number. Every material will have its own plan this way.
Any suggestions?
Regards,
Bora.

The number is auto-generated, have you tried creating a few routings in your sandbox? If not please check, system will auto-generate the number.
Check & revert.
Regards,
Vivek

AS91 error direct input LSMW

Hi all
I created an LSMW project for tcode AS91 using Direct Input method. I am encountering an error saying that "No valid cost center was entered". This error appears although there is a const center entered in the upload file. What would cause this error?
Please help
Thanks

Is the cost center mapped correctly to the target field? Make sure the cost center has been created for a validity period that matches the period of the time dependent asset data you are loading.
Edit: just found out that the cost center must be valid on the day after the day of migration as in T093C-DATUM, please doublecheck in table CSKS or via KS03.
Thomas

Error in uploading the PO while running Direct Input porgram RM06EEI0

Hi all
i have written one conversion program to upload PO. Here in the program i am populating the batch input structures MBEPOH and MBEPOI and finally writing it to the unix file.
Finally when i execute the direct input program RM06EEI0
using the logical filename , it gives the error as 'Net price should be greater than 0' .
i have also checked the file in the unix directory , there the net price is getting populated correctly. Also i debugged the direct input program and found out that net price is getting passed correctly to FM ME_CREATE_PO_ITEM but somewhere the KOMP structure is not getting populated ,that is why net price becomes 0.
Can anybody please tell whether there is some issue in writing the conversion program or i am missing some parameters to be passed in MBEPOH or MBEPOI, or what has to be done.
Please help me , it is urgent .
Thanks and Regards,
Syed

I have the same problem, could somebody help?
Thanx, Marian

Tax issue with Direct Input mode of RFBIBL00

Hi, I have a problem using RFBIBL00 (direct input mode) to create A/R invoices. There is no tax associated with the invoice, however, when I use direct input mode, instead of posting immediately, a batch input session is created. In the log, an information message: 'Specify a tax jurisdiction key'. The BDC session is processed with no error.
When using Call transaction mode for RFBIBL00, the document is posted immediately but the requirement is to use Direct input mode.
There is no converted data in the BBTAX structure since the doc. does not need to post to tax account. Do I need to populate the Tax amount, Tax code and jurisdiction code in this structure and BBSEG in order to by pass the information message?
Any advice is appreciated.
- Minami

Problem solved. Just need to untie the relationship between the ITEM import structure and the BBTAX so the Direct Input program will not require a tax jurisdiction code.

LSMW direct input method

Hi
What is the procedure to include a specific program / report in the drop down box of program name of Direct Input method in LSMW?
What is the diff. between Physical path and Logical path?
How can we give our input data using logical path when we execute some standard batch or direct input programs?
Ex. RMDATIND.

http://help.sap.com/saphelp_erp2005vp/helpdata/en/87/f3ae63e68111d1b3ff006094b944c8/frameset.htm
Regards,
Amit

"Indicator: GR-Based Invoice Verification" direct input Upld PO LSMW

Hi, Im using lsmw direct input method. I am uploading the PO. But the GR Based invoice verification field was not checked ON. Im trying this using USER_EXIT in enhancement MM06E005, with EXIT_SAPMM06E_017.
Any body can tell me how i can check ON the field WEBRE( GR based invoice verification) while creating the PO through LSWM.
regards
RAJ

Hi,
How you solved, kindly explain
Also explain how to upload PO through LSMW in the case of multiple line items for single PO?
Thanks & Regards
Ravi

Problem with direct input program while uploading data into database

TABLES: BGR00, " Mappensatz
 BMM00, " MM01/MM02 BTCI-Kopfdaten
 BMMH1, " MM01/MM02 Hauptdaten
 BMMH2, " Länderdaten (Steuern)
 BMMH3, " Prognosewerte
 BMMH4, " Verbrauchswerte
 BMMH5, " Kurztexte
 BMMH6, " Mengeneinheiten
 BMMH7, " Langtexte
 BMMH8. " Referentielle EAN's
 Satztypen
DATA: MAPPENSATZ LIKE BMM00-STYPE VALUE '0',
 KOPFSATZ LIKE BMM00-STYPE VALUE '1',
 HAUPTSATZ LIKE BMM00-STYPE VALUE '2',
 KUN_SATZ LIKE BMM00-STYPE VALUE 'Z',
 LANDSATZ LIKE BMM00-STYPE VALUE '3',
 PROGSATZ LIKE BMM00-STYPE VALUE '4',
 VERBSATZ LIKE BMM00-STYPE VALUE '5',
 KTEXTSATZ LIKE BMM00-STYPE VALUE '6',
 MESATZ LIKE BMM00-STYPE VALUE '7',
 TEXTSATZ LIKE BMM00-STYPE VALUE '8',
 EANSATZ LIKE BMM00-STYPE VALUE '9'.
Common Data Bereich fuer die extern aufgerufenen Routinen
 Initialstrukturen
DATA: BEGIN OF COMMON PART RMMMBIMY.
DATA: BEGIN OF I_BMM00.
 INCLUDE STRUCTURE BMM00. " Kopfdaten
DATA: END OF I_BMM00.
DATA: BEGIN OF I_BMMH1.
 INCLUDE STRUCTURE BMMH1. " Haupdaten
DATA: END OF I_BMMH1.
DATA: BEGIN OF I_BMMH2.
 INCLUDE STRUCTURE BMMH2. " Länderdaten
DATA: END OF I_BMMH2.
DATA: BEGIN OF I_BMMH3.
 INCLUDE STRUCTURE BMMH3. " Prognosewerte
DATA: END OF I_BMMH3.
DATA: BEGIN OF I_BMMH4.
 INCLUDE STRUCTURE BMMH4. " Verbrauchswerte
DATA: END OF I_BMMH4.
DATA: BEGIN OF I_BMMH5.
 INCLUDE STRUCTURE BMMH5. " Kurztexte
DATA: END OF I_BMMH5.
DATA: BEGIN OF I_BMMH6.
 INCLUDE STRUCTURE BMMH6. " Mengeneinheiten
DATA: END OF I_BMMH6.
DATA: BEGIN OF I_BMMH7.
 INCLUDE STRUCTURE BMMH7. " Textzeilen
DATA: END OF I_BMMH7.
DATA: BEGIN OF I_BMMH8.
 INCLUDE STRUCTURE BMMH8. " Referentielle EAN's
DATA: END OF I_BMMH8.
DATA: END OF COMMON PART.
DATA: WA LIKE TEDATA-DATA.
 Einzelfelder
DATA: GROUP_COUNT(6) TYPE C, " Anzahl Mappen
 TRANS_COUNT(6) TYPE C, " alte Definition für rmmmbim0
 SATZ_COUNT LIKE MUEB_REST-TRANC, " Trans.zähler neu
 H_IND_COUNT LIKE MUEB_REST-D_IND, " Index welches Feld zurücks.
 SATZ2_COUNT(6) TYPE C. " Anz. Sätze je Trans. ohne Kopfsatz
DATA: XEOF(1) TYPE C, " X=End of File erreicht
 XHAUPTSATZ_EXIST TYPE C, " X=Hauptsatz zum Kopf exi.
 NODATA(1) TYPE C. " kein BI für dieses Feld
mk/15.08.94:
DATA: GROUP_OPEN(1) TYPE C. " X=Mappe schon geöffnet
*eject
 Konstanten
DATA: C_NODATA(1) TYPE C VALUE '/'. " Default für NODATA
DATA: MATNR_ERW LIKE MARA-MATNR VALUE '0 '.
DATA: MATNR_ERW_INT LIKE MARA-MATNR. "internal sight of '0 '
DATA: MATNR_LAST LIKE MARA-MATNR. "Material number
mk/11.08.94 2.1H:
If this flag is initial, the database updates will be done directly
during background maintenance instead of using a separate update
task. (no usage of this flag in dialogue mode!)
DATA: DBUPDATE_VB(1) VALUE ' '. "note 306628
data: matsync type mat_sync. "wk/99a no update in dialog if called
***INCLUDE ZMUSD070.
TABLES: MARA, "Material Master: General Data
 MARC, "Material Master: C Segment
 MARD, "Material Master: St Loc/Batch
 MBEW, "Material Valuation
 MVKE, "Material Master: Sales Data
 MLGN, "Material Data per Whse Number
 MLAN, "Tax Classification: Material
 T001W, "Plants/Branches
 TBICU.
DATA: BEGIN OF VALUTAB OCCURS 0.
 INCLUDE STRUCTURE RSPARAMS.
DATA: END OF VALUTAB.
DATA: BEGIN OF VARTECH.
 INCLUDE STRUCTURE VARID.
DATA: END OF VARTECH.
DATA: PARMS LIKE ZXXDCONV.
DATA: REC_COUNT TYPE I,
 REC_COUNT_BAD TYPE I,
 ZJOBID LIKE TBIZU-JOBID,
 ZJOBCOUNT LIKE TBIZU-JOBCOUNT,
 ZMATNR LIKE MARA-MATNR,
 ZTEXT(80) TYPE C.
CONSTANTS: LIT_ZERO(18) TYPE C VALUE '000000000000000000',
 LIT_CHAR TYPE C VALUE '_',
 LIT_CREATE LIKE BMM00-TCODE VALUE 'MM01',
 LIT_CHANGE LIKE BMM00-TCODE VALUE 'MM02',
 LIT_CHECK(1) TYPE C VALUE 'X'.
DATA: BEGIN OF INP_DATA OCCURS 0,
 MATNR(18) TYPE C, " Material code
 UMREN(6) TYPE C, " Denominator
 MEINH(3) TYPE C, " Alternate UOM
 UMREZ(6) TYPE C, " Numerator
 END OF INP_DATA.
*eject
SELECTION-SCREEN BEGIN OF BLOCK INOUT WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (13) TEXT-004.
PARAMETERS: P_PC RADIOBUTTON GROUP SRC DEFAULT 'X'.
SELECTION-SCREEN COMMENT (6) TEXT-005.
PARAMETERS: P_UNIX RADIOBUTTON GROUP SRC.
SELECTION-SCREEN COMMENT (6) TEXT-006.
PARAMETERS: P_DS_TYP LIKE ZXXDCONV-DS_TYP
 DEFAULT 'ASC'.
SELECTION-SCREEN END OF LINE.
*SELECT-OPTIONS: S_PATH FOR PARMS-PATH
 NO INTERVALS
 LOWER CASE.
PARAMETERS: P_PATH TYPE RLGRAP-FILENAME.
PARAMETERS: P_HDRLIN LIKE ZXXDCONV-HDR_LINES
 DEFAULT 0,
 P_JOBNAM LIKE TBICU_S-JOBNAME
 MEMORY ID BM1,
 P_DI_EXE AS CHECKBOX
 DEFAULT LIT_CHECK,
 P_MAPPE LIKE BGR00-GROUP
 DEFAULT 'MRP_UOM_LOAD'
 NO-DISPLAY.
SELECTION-SCREEN END OF BLOCK INOUT.
*eject
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_PATH.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
 EXPORTING
 PROGRAM_NAME = SYST-REPID
 DYNPRO_NUMBER = SYST-DYNNR
 FIELD_NAME = 'P_PATH'
 CHANGING
 FILE_NAME = S_PATH-LOW
 FILE_NAME = P_PATH
 EXCEPTIONS
 MASK_TOO_LONG = 1
 OTHERS = 2.
AT SELECTION-SCREEN.
Set up parameter record
PARMS-UNIX = P_UNIX.
PARMS-PC = P_PC.
PARMS-DS_TYP = P_DS_TYP.
PARMS-JOBNAME = P_JOBNAM.
PARMS-MAPPE = P_MAPPE.
PARMS-HDR_LINES = P_HDRLIN.
*eject
 Main Processing Routine *
START-OF-SELECTION.
Initialization
PERFORM 0000_HOUSEKEEPING.
Initialize transaction data in I_BM00
PERFORM 0500_INIT_BMM00.
Process input files
SORT S_PATH BY SIGN OPTION LOW.
 MOVE S_PATH-LOW TO PARMS-PATH.
 MOVE P_PATH TO PARMS-PATH.
LOOP AT S_PATH.
 AT NEW LOW.
 CLEAR INP_DATA.
 REFRESH INP_DATA.
Read source data into internal table
 PERFORM 1000_GET_SOURCE_DATA TABLES INP_DATA.
Processs each record in internal table
 ZTEXT = TEXT-007.
 ZTEXT+13 = PARMS-DS_NAME.
 PERFORM 4000_PROGRESS_INDICATOR USING ZTEXT.
Initialize transaction data in I_BM00
PERFORM 0500_INIT_BMM00.
 LOOP AT INP_DATA.
Reset tables for each record
 BMM00 = I_BMM00.
 BMMH1 = I_BMMH1.
 BMMH6 = I_BMMH6.
Load structures with data
 MOVE-CORRESPONDING INP_DATA TO BMM00.
 PERFORM 2000_WRITE_OUTPUT USING BMM00.
 MOVE-CORRESPONDING INP_DATA TO BMMH1.
 PERFORM 2000_WRITE_OUTPUT USING BMMH1.
 MOVE-CORRESPONDING INP_DATA TO BMMH6.
 PERFORM 2000_WRITE_OUTPUT USING BMMH6.
 REC_COUNT = REC_COUNT + 1.
 ENDLOOP.
 ENDAT.
ENDLOOP.
IF REC_COUNT GT 0
AND P_DI_EXE EQ LIT_CHECK.
 PERFORM 3000_START_DI_JOB.
ENDIF.
WRITE: / TEXT-008,
 REC_COUNT.
PERFORM 9000_END_OF_JOB.
*eject
Include containing common routines used by direct input programs
INCLUDE ZMUSD071.
*eject
 FORM 0500_INIT_BMM00 *
 Initialize I_BMM00 with transaction code and views selected *
FORM 0500_INIT_BMM00.
***this changes done by samson**
if not inp_data[] is initial.
select single matnr from mara INTO ZMATNR where matnr = inp_data-matnr.
if sy-subrc = 0.
I_BMM00-TCODE = LIT_CHANGE.
Basic data
I_BMM00-XEIK1 = LIT_CHECK.
else.
I_BMM00-TCODE = LIT_CREATE.
Basic data
I_BMM00-XEIK1 = LIT_CHECK.
endif.
endif.
**this changes above done by samson**
Transaction code
I_BMM00-TCODE = LIT_CHANGE.
Basic data
I_BMM00-XEIK1 = LIT_CHECK.
ENDFORM.
INCLUDE ZMUSD069.
*eject
 FORM 0000_HOUSEKEEPING *
 Initialization routines *
FORM 0000_HOUSEKEEPING.
PERFORM 0010_LDS_NAME.
PERFORM 0020_DS_NAME.
PERFORM 0030_OPEN_FILE.
PERFORM 0040_INIT_STRUCTS.
ENDFORM.
*eject
 FORM 0010_LDS_NAME *
 Obtain logical file name from DI job details *
FORM 0010_LDS_NAME.
Check valid job name
SELECT SINGLE * FROM TBICU
 WHERE JOBNAME EQ PARMS-JOBNAME.
IF SY-SUBRC EQ 0.
 CALL FUNCTION 'RS_VARIANT_VALUES_TECH_DATA'
 EXPORTING
 REPORT = TBICU-REPNAME
 VARIANT = TBICU-VARIANT
 IMPORTING
 TECHN_DATA = VARTECH
 TABLES
 VARIANT_VALUES = VALUTAB
 EXCEPTIONS
 VARIANT_NON_EXISTENT = 1
 VARIANT_OBSOLETE = 2
 OTHERS = 3.
 IF SY-SUBRC EQ 0.
 READ TABLE VALUTAB WITH KEY 'LDS_NAME'.
 MOVE VALUTAB-LOW TO PARMS-LDS_NAME.
 ELSE.
 MESSAGE I001 WITH PARMS-JOBNAME.
 MESSAGE A099.
 ENDIF.
ELSE.
 MESSAGE I000 WITH PARMS-JOBNAME.
 MESSAGE A099.
ENDIF.
ENDFORM.
*eject
 FORM 0040_INIT_STRUCTS *
 Initialize structures for direct input records *
FORM 0040_INIT_STRUCTS.
Start of standard SAP initialization from example program RMMMBIME
*------- Write session record -
CLEAR BGR00.
BGR00-STYPE = MAPPENSATZ.
BGR00-GROUP = PARMS-MAPPE.
BGR00-NODATA = C_NODATA.
BGR00-MANDT = SY-MANDT.
BGR00-USNAM = SY-UNAME.
BGR00-START = BGR00-NODATA.
BGR00-XKEEP = BGR00-NODATA.
PERFORM 2000_WRITE_OUTPUT USING BGR00.
*----- Initialize structures -
NODATA = BGR00-NODATA.
PERFORM INIT_STRUKTUREN_ERZEUGEN(RMMMBIMI) USING NODATA.
End of standard SAP initialization from example program RMMMBIME
ENDFORM.
*eject.
 FORM 3000_START_DI_JOB *
 Start direct input job *
FORM 3000_START_DI_JOB.
ZTEXT = 'Starting '(021).
ZTEXT+9 = TBICU-JOBNAME.
PERFORM 4000_PROGRESS_INDICATOR USING ZTEXT.
CALL FUNCTION 'BI_START_JOB'
 EXPORTING
 JOBID = ' '
 JOBTEXT = TBICU-JOBNAME
 REPNAME = TBICU-REPNAME
 SERVER = TBICU-EXECSERVER
 VARIANT = TBICU-VARIANT
 NEW_JOB = 'X'
 CONTINUE_JOB = ' '
 START_IMMEDIATE = 'X'
 DO_NOT_PRINT = 'X'
 USERNAME = SY-UNAME
 IMPORTING
 JOBID = ZJOBID
 JOBCOUNT = ZJOBCOUNT
 EXCEPTIONS
 JOB_OPEN_FAILED = 1
 JOB_CLOSE_FAILED = 2
 JOB_SUBMIT_FAILED = 3
 WRONG_PARAMETERS = 4
 JOB_DOES_NOT_EXIST = 5
 WRONG_STARTTIME_GIVEN = 6
 JOB_NOT_RELEASED = 7
 WRONG_VARIANT = 8
 NO_AUTHORITY = 9
 DIALOG_CANCELLED = 10
 JOB_ALREADY_EXISTS = 11
 PERIODIC_NOT_ALLOWED = 12
 ERROR_NUMBER_GET_NEXT = 13
 OTHERS = 14.
IF SY-SUBRC EQ 0.
 WRITE: / 'Direct input job'(022), TBICU-JOBNAME, 'started'.
ELSE.
 WRITE: / 'Direct input failed with return code'(023), SY-SUBRC.
ENDIF.
FORM 0020_DS_NAME.
CALL FUNCTION 'FILE_GET_NAME'
 EXPORTING
 CLIENT = SY-MANDT
 LOGICAL_FILENAME = PARMS-LDS_NAME
 OPERATING_SYSTEM = SY-OPSYS
 IMPORTING
 FILE_NAME = PARMS-DS_NAME
 EXCEPTIONS
 FILE_NOT_FOUND = 1
 OTHERS = 2.
IF SY-SUBRC NE 0.
 MESSAGE E002 WITH PARMS-LDS_NAME.
 MESSAGE A099.
ENDIF.
ENDFORM.
*eject
 FORM 0030_OPEN_FILE *
 Open physical file for output *
FORM 0030_OPEN_FILE.
OPEN DATASET PARMS-DS_NAME FOR OUTPUT IN TEXT MODE. "thg191105
OPEN DATASET PARMS-DS_NAME FOR OUTPUT IN TEXT MODE
 encoding default. "thg191105
IF SY-SUBRC NE 0.
 MESSAGE E003 WITH PARMS-DS_NAME.
 MESSAGE A099.
ENDIF.
ENDFORM.
*eject
 FORM 1000_GET_SOURCE_DATA *
 Read source data into internal table *
--> INP_DATA " Name of internal table passed as parameter *
FORM 1000_GET_SOURCE_DATA TABLES INP_DATA.
CALL FUNCTION 'Z_FILE_UPLOAD'
 EXPORTING
 UNIX = PARMS-UNIX
 PC = PARMS-PC
 FILETYPE = PARMS-DS_TYP
 FILENAME = PARMS-PATH
 HDR_LINES = PARMS-HDR_LINES
 TABLES
 DATA_TAB = INP_DATA
 EXCEPTIONS
 CONVERSION_ERROR = 1
 FILE_OPEN_ERROR = 2
 FILE_READ_ERROR = 3
 INVALID_TABLE_WIDTH = 4
 INVALID_TYPE = 5
 NO_BATCH = 6
 UNKNOWN_ERROR = 7
 INVALID_SOURCE = 8
 OTHERS = 9.
ENDFORM.
*eject
 FORM 2000_WRITE_OUTPUT *
 Write record in standard SAP structure to UNIX file *
--> I_STRUCT " Name of record passed as parameter *
*FORM 2000_WRITE_OUTPUT USING I_STRUCT."SRY28NOV05
FORM 2000_WRITE_OUTPUT USING I_STRUCT TYPE ANY. "SRY28NOV05
 TRANSFER I_STRUCT TO PARMS-DS_NAME.
IF SY-SUBRC NE 0.
 MESSAGE E004 WITH PARMS-DS_NAME.
 MESSAGE A099.
ENDIF.
ENDFORM.
*eject
*& Form 2100_WS_DOWNLOAD
 text *
--> p1 text
<-- p2 text
FORM 2100_WS_DOWNLOAD TABLES INP_DATA.
DATA: FILENAME LIKE RLGRAP-FILENAME. "SRY28NOV05
DATA: W_FILENAME TYPE STRING. "SRY28NOV05
DATA: W_FTYP(10) TYPE C VALUE 'DAT'. "SRY28NOV05
MOVE PARMS-DS_NAME TO FILENAME. "SRY28NOV05
MOVE PARMS-DS_NAME TO W_FILENAME. "SRY28NOV05
*BEGIN OF BLOCK COMMENT BY SRY28NOV05
CALL FUNCTION 'WS_DOWNLOAD'
 EXPORTING
 BIN_FILESIZE = ' '
 CODEPAGE = ' '
 FILENAME = FILENAME
 FILETYPE = 'DAT'
 MODE = ' '
 WK1_N_FORMAT = ' '
 WK1_N_SIZE = ' '
 WK1_T_FORMAT = ' '
 WK1_T_SIZE = ' '
 COL_SELECT = ' '
 COL_SELECTMASK = ' '
 importing
 filelength =
 TABLES
 DATA_TAB = INP_DATA
 FIELDNAMES =
 EXCEPTIONS
 FILE_OPEN_ERROR = 1
 FILE_WRITE_ERROR = 2
 INVALID_FILESIZE = 3
 INVALID_TABLE_WIDTH = 4
 INVALID_TYPE = 5
 NO_BATCH = 6
 UNKNOWN_ERROR = 7
 OTHERS = 8.
*END OF BLOCK COMMENT BY SRY28NOV05
*BEGIN OF BLOCK ADDED BY SRY28NOV05
CALL FUNCTION 'GUI_DOWNLOAD'
 EXPORTING
 FILENAME = W_FILENAME
 FILETYPE = W_FTYP
 TABLES
 DATA_TAB = INP_DATA
 EXCEPTIONS
 FILE_WRITE_ERROR = 1
 NO_BATCH = 2
 GUI_REFUSE_FILETRANSFER = 3
 INVALID_TYPE = 4
 NO_AUTHORITY = 5
 UNKNOWN_ERROR = 6
 HEADER_NOT_ALLOWED = 7
 SEPARATOR_NOT_ALLOWED = 8
 FILESIZE_NOT_ALLOWED = 9
 HEADER_TOO_LONG = 10
 DP_ERROR_CREATE = 11
 DP_ERROR_SEND = 12
 DP_ERROR_WRITE = 13
 UNKNOWN_DP_ERROR = 14
 ACCESS_DENIED = 15
 DP_OUT_OF_MEMORY = 16
 DISK_FULL = 17
 DP_TIMEOUT = 18
 FILE_NOT_FOUND = 19
 DATAPROVIDER_EXCEPTION = 20
 CONTROL_FLUSH_ERROR = 21
 OTHERS = 22.
IF SY-SUBRC NE 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*END OF BLOCK ADDED BY SRY28NOV05
ENDFORM. " 2100_WS_DOWNLOAD
*eject
 FORM 4000_PROGRESS_INDICATOR *
 Write progress text to status bar *
--> TEXT " Text passed as parameter *
FORM 4000_PROGRESS_INDICATOR USING TEXT.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
 EXPORTING
 PERCENTAGE = 0
 TEXT = TEXT
 EXCEPTIONS
 OTHERS = 1.
ENDFORM.
*eject.
 FORM 9000_END_OF_JOB *
 Close files on UNIX *
FORM 9000_END_OF_JOB.
CLOSE DATASET PARMS-DS_NAME.
ENDFORM.
FORM 1000_GET_SOURCE_DATA TABLES INP_DATA.
CALL FUNCTION 'Z_FILE_UPLOAD'
 EXPORTING
 UNIX = PARMS-UNIX
 PC = PARMS-PC
 FILETYPE = PARMS-DS_TYP
 FILENAME = PARMS-PATH
 HDR_LINES = PARMS-HDR_LINES
 TABLES
 DATA_TAB = INP_DATA
 EXCEPTIONS
 CONVERSION_ERROR = 1
 FILE_OPEN_ERROR = 2
 FILE_READ_ERROR = 3
 INVALID_TABLE_WIDTH = 4
 INVALID_TYPE = 5
 NO_BATCH = 6
 UNKNOWN_ERROR = 7
 INVALID_SOURCE = 8
 OTHERS = 9.
ENDFORM.
*eject
 FORM 2000_WRITE_OUTPUT *
 Write record in standard SAP structure to UNIX file *
--> I_STRUCT " Name of record passed as parameter *
*FORM 2000_WRITE_OUTPUT USING I_STRUCT."SRY28NOV05
FORM 2000_WRITE_OUTPUT USING I_STRUCT TYPE ANY. "SRY28NOV05
 TRANSFER I_STRUCT TO PARMS-DS_NAME.
IF SY-SUBRC NE 0.
 MESSAGE E004 WITH PARMS-DS_NAME.
 MESSAGE A099.
ENDIF.
ENDFORM.
*eject
*& Form 2100_WS_DOWNLOAD
 text *
--> p1 text
<-- p2 text
FORM 2100_WS_DOWNLOAD TABLES INP_DATA.

Hi,
Thnaks for your reply, This is my requirement.
Here my problem is i am trying to upload the data from flatfile which contain materil number, denominator, Actual UOM, Nominator field values.
Which is the data i need to upload into MM02 and MM01, if material number is new then it has to create the material, if material is already existing it has to update the UOM values.
here i am getting data into my internal table INP_DATA, from that i am trying to upload the data to database by using job name MRP_MATERIAL_MASTER_DATA_UPLOAD with direct input program RMDATIND.
when i execute my program i am getting success message all the records writtin from flatfile to application server. and job started message.
then if i go into sm37 screen there i execute the job it is also giving active message. if i refresh it it is showing job completed message.
then i look at job log status. there i found that for existing material it is expecting material type, for new material it is giving some gravity error.
So could u help me in this it will be gr8.
Thanks & Regards,
RamNV

Problem while updating the forecast value in m.master by direct input menth

Hi All
Good Day
I am updating the forecast value in material master by direct input method.
my program is working fine when I am running it online.
but when i am runnig in back ground I am getting one error which is mentioned below
 Job ZM_OPTIMIZA_UPLOAD: Data does not match the job definition; job terminated BD 078 E
Please anyone can help ne in above case.
Thanks in advance.
Cheers
Vallabhaneni

Hi Hakim
How are you
Thanks for your valuable suggestion.
I am executing my program in background with bmv0 transaction with variant, in development I can run this job in background with out any logical errors but in QA I am getting errors.
Can you please help me in the above case.
In Bmv0 transaction first I defined the job and in program rmdatind (execute) screen first I mentioned the Max. no of logical errors as 500 and Transactions per commit unit as 500 and I run the program in background in bmv0 transaction and I am getting the message background job terminated immediately
Because of this again I changed the Max. no of logical errors 500 to 99999 and transaction per commit unit 500 to 999999 and then i scheduled my program in background.
Alomost it ran for 27 hours and then it has given the message background job terminated.
Job log entries are as follows.
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040840; material number SUJ82J8400; error gravity E
22.12.2008 11:19:46 Transaction 0000040840: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040841; material number SUJ84G3001; error gravity E
22.12.2008 11:19:46 Transaction 0000040841: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040842; material number SUJ84G3002; error gravity E
22.12.2008 11:19:46 Transaction 0000040842: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040843; material number SUJ86G0100; error gravity E
22.12.2008 11:19:46 Transaction 0000040843: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040844; material number SUJ86G0300; error gravity E
22.12.2008 11:19:46 Transaction 0000040844: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040845; material number SUJ86G0900; error gravity E
22.12.2008 11:19:46 Transaction 0000040845: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040846; material number SUJ86G9600; error gravity E
22.12.2008 11:19:46 Transaction 0000040846: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040847; material number SUJ86G9601; error gravity E
22.12.2008 11:19:46 Transaction 0000040847: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040848; material number SUJ86J0000; error gravity E
22.12.2008 11:19:46 Transaction 0000040848: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:20:54 Transaction 0000040848 completed Mat. no. No. of log. errors 0000040848
22.12.2008 11:21:30 ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILED
22.12.2008 11:21:30 Job cancelled
I know it has taken long time to process the job because of I changed the transactions per commit unit (500 to 999999) it kills the system
But I am supposed to provide some number < 999999 in transactions per commit unit
actually I haven't tried like I said above < 999999 because i don't have any hopes.
Please look at this problem and help me in this case.
Thanks in advance.
Vallabhaneni

Direct input (DINP) in Lsmw

Hii All,
I am using direct input method for uploading Material Forecasting in SAP server ...
But the problem is that , I m not able to get the error log ie im not getting the material no.
that are ended up in error while uploading. Actually, i can see the material that are in
error but im not abe to save it or download it,So as to pass it to functional Consultants.
Im using the RMDATIND program to upload the file.
Requesting all to provide some suggestion to get /capture the error data.
Thanks in Advance.
Chandan

hi Venu
can you please tell me why do u want to upload data from adrc table.
thanks
abdul

LSMW Direct input method error

Hi experts,
   I created the LSMW using direct input method (PR Creation).
   In the create batch input session step (executed) i am getting below
message and follwed bt processing terminated message and going out
Transaction 0: transaction code / not supported
what could be the problem ? any problem in specifying logical path .
pls let me know the solution.
Thanks
sai

Hi chenna,
   Thanks for reply, I added the tcode and now getting the message like the session was created
but when i see in sm35 there is no seesion created and there is no log also.
what could be the reason? pls explain
thanks
sai

Best practice "changing several related objects via BDT" (Business Data Toolset) / Mehrere verbundene Objekte per BDT ändern

Hallo,
I want to start a
discussion, to find a best practice method to change several related master
data objects via BDT. At the moment we are faced with miscellaneous requirements,
where we have a master data object which uses BDT framework for maintenance (in
our case an insured objects). While changing or creating the insured objects a
several related objects e.g. Business Partner should also be changed or
created. So am searching for a best practices approach how to implement such a
solution.
One Idea was to so call a
report via SUBMIT AND RETURN in Event DSAVC or DSAVE. Unfortunately this implementation
method has only poor options to handle errors. Second it is also hard to keep LUW
together.
Another idea is to call an additional
BDT instance in the DCHCK-event via FM BDT_INSTANCE_SELECT and the parameters
iv_xpush_classic = ‘X’ and iv_xpop_classic = ‘X’. At this time we didn’t get
this solution working correctly, because there is always something missing
(e.g. global memory is not transferred correctly between the two BDT instances).
So hopefully you can report
about your implementations to find a best practice approach for facing such
requirements.
Hallo
ich möchte an der Stelle eine Diskussion starten um einen Best Practice
Ansatz zu finden, der eine BDT Implementierung/Erweiterung beschreibt, bei der
verschiedene abhängige BDT-Objekte geändert werden. Momentan treffen bei uns
mehrere Anforderungen an, bei deinen Änderungen eines BDT Objektes an ein
anderes BDT Objekte vererbt werden sollen. Sprich es sollen weitere Objekte geänderte
werden, wenn ein Objekt (in unserem Fall ein Versicherungsvertrag) angelegt
oder geändert wird (zum Beispiel ein Geschäftspartner)
Die erste unserer Ideen war es, im Zeitpunkt DSAVC oder DSAVE einen
Report per SUBMIT AND RETURN aufzurufen. Dieser sollte dann die abhängigen Änderungen
durchführen. Allerdings gibt es hier Probleme mit der Fehlerbehandlung, da
diese asynchrone stattfinden muss. Weiterhin ist es auch schwer die Konsistenz der
LUW zu garantieren.
Ein anderer Ansatz den wir verfolgt hatten, war im Zeitpunkt
DCHCK per FuBA BDT_INSTANCE_SELECT und den Parameter iv_xpush_classic = ‘X’ and
iv_xpop_classic = ‘X’ eine neue BDT Instanz zu erzeugen. Leider konnten wir diese
Lösung nicht endgültig zum Laufen bekommen, da es immer Probleme beim
Übertragen der globalen Speicher der einzelnen BDT Instanzen gab.
Ich hoffe Ihr könnt hier eure Implementierungen kurz beschreiben, dass wir
eine Best Practice Ansatz für das Thema finden können
BR/VG
Dominik

Direct Input via BDT?

Similar Messages

Maybe you are looking for