Direct inward System Access (DISA) Audio or script files ??

Dear All,
I was looking for Simple-DISA-SBCS.zip files as I search on cisco website and support community forums but I am unable to find the files.
It will be very helpful if anyone send the link to download the files or send the files.
Model : UC560

Similar Messages

Implement Direct Inward System Access (DISA) in VoIP Environment

Hi,
May i know, is it possible to implement DISA Call in VoIP environment. If yes, how we can make it? Is it some configuration in CE Router at SRST Sites or CE Router at Main Sites? Also can you give me the information how to implement it?
As I understand DISA (Direct Inward System Access) allows someone calling in from outside the telephone switch (PBX) to obtain an "internal" system dialtone and dial calls as if from one of the extensions attached to the telephone switch. Frequently the user calls a number DISA number with invokes the DISA application. The DISA application in turn requires the user to enter his passcode, followed by the pound sign (#). If the passcode is correct, the user will hear dialtone on which a call may be placed.
Please advise me as soonest.
Thanks in advanced
Rgds,
Izazi Zainy

Giving users access to system dial tone via DISA is a security hole on PBX's and VOIP system so be careful how you use it. The following note describes how to use a TCL script and audio prompts to allow a user to call in and authenticate via an account number and PIN before they can dial an internal number. This will allow basic DISA type functions on a H323 gateway. Obviously you would also want to log the details of who made the call and when they made it, so syslog VOIP accounting is enabled to send a CDR to a syslog server.
We use an inbuilt TCL script that is inbuilt in IOS called 'clid_authen_collect'. This script authenticates the call with the ANI (Calling number) and DNIS (Called number) of the incoming call, or if this fails, it then prompts the user to enter an account number and then a PIN number. Since the call is coming in on an FXO (or FXS) port, there is no associated ANI and DNIS, so the script immediately prompts the user for the account number and PIN. We do the authentication by a local 'username XXX password YYY' command in the router config. The user keys in the account code and PIN (can use the # as a string terminator to speed the process up and if the values entered match a local username and password, it then prompts for the user to enter the actual destination telephone number.
I have also enabled syslog accounting for call detail records, so when the call completes you get a basic record of the called number and durations. If they wanted to use a full blown AAA server, they could run the authentication from this and this way keep a full log of all users calling in, and it would also log the CDR's for billing etc ...
The router needs the following audio .AU files on the flash memory :
Test#sh flash
System flash directory:
File Length Name/status
1 14097360 c2600-is-mz.122-11.T.bin
2 14150 enter_account.au
3 14869 auth_fail_retry.au
4 11510 enter_pin.au
5 52644 enter_destination.au
[14190860 bytes used, 2062068 available, 16252928 total]
16384K bytes of processor board System flash (Read/Write)
Test#
(obviously needs the IOS image but the important files are the audio prompts)
The .au files are the audio prompts that the IVR plays. These are in Sun/Next audio 64Kbps G711ulaw audio format. Use an audio editor to create the files and save them in this format.
When a call comes in on FXO port 1/0/0, you will hear a prompt to enter the account code. Key in the account number, followed by a #, then key in the PIN , followed by #. The caller will be prompted to enter the destination phone number, and this is matched on any subsequent voip or pots dial peers.
Configured user account numbers/passwords are 1000/1000 and 1001/1001
Refer to the attachment for the full router configs. Hope this helps.

Not able to access local path for script file

Hi All,
I am integration my application (built in Asp.Net/Vb.Net) with InDesign Server CS4.
InDesignServer is installed on separte machine other than the machine on which application is running.
All of the scripts and indd files are placed on the machine (on which application is running):
When I send SOAP request to the InDesign Server from my application. I get following error:
"Cannot find the folder for the script "C:\ Path of the Script (.jsx)"
Please let me know how to manage this error.
It would be great if I get following doubts clerified:
1. Is it required to put network-path for the script files when InDesign Server is running on different machine and client machine is on other machine?
Kind Regards...
Prashant

I get the same error, I'd like to know if anybody can help me here??

Direct File System access problems from JAWS application

Hello,
I have built a Web Start application that consists of a Webserver (Jetty) ,
a WAR file and a Java (main) class that deploys the web application on
the server and starts the server. It all works fine, apart from the fact
that I am getting java.security.AccessControlExceptions when I try to
access the local filesystem or system variables like the java.io.tmpdir.
I have signed all the jar files and I included the<security> <allpermissions />
</security> tag in the jnlp file. Still, I can't seem to get out
of the sandbox.
I have read in this article (http://mindprod.com/jgloss/javawebstart.html)
that direct file system access from a Web Start application is impossible
(Quote: "There is still no way for even a signed JAWS app to
find some persistent disk space in an easy way. It pretty well
has to ask the user for the name of some directory to use.")
Is this true?
Thank you,
Peter

Hi Guys,
I found a way to access the local filesystem...
Besides signing all the jar files and including the<security><allpermissions /></security> tag in the jnlp file I have to include this line in the code I execute on the client machine:
System.setSecurityManager(null);
Regards,
Peter

Is there no way to direct an AIR app's audio to different audio output devices?

I'm needing to make a couple of our AIR apps select certain audio devices to send their audio output to, and last year, somebody mentioned possibly using native extensions to do this. I had to start working on other things for a while, but I've come back to this (for the moment), and I've basically learned how to create native extensions.
But so far, they don't seem to provide me any special access to anything going on under the hood of an AIR app. When you stream live audio in through RTMP or RTMFP, the details of the audio are hidden from you. There doesn't appear to be any place where you can actually access the audio bytes that are being sent over the wire. You can specify a certain SoundTransform object for the NetStream to use, but that class is final and a vanilla Flash construct, so even if it may have a way to access the audio bytes, they're not acessible at all.
It really looks like, when a NetStream object starts streaming in live audio, there is no way under the sun to access the audio bytes and direct them to a certain audio output device, with or without extensions. Is this so? It would be unfortunate if Adobe didn't allow this, even through native extensions. Thanks.

Couple quick thoughts..
Limits are important. There's a large amount of work done to keep a clear separation between a users decision and a developers decision. For instance, you can't change a users default audio output because that clearly violates a users decision. That said, here's a whole mess of people debating the issue and actually eventually an undocumented COM API you can find that will actually let you do it in Vista/Win7 (but not 8), however don't expect that to be a 'good thing to do':
http://social.microsoft.com/Forums/en-US/9ebd7ad6-a460-4a28-9de9-2af63fd4a13e/programatica lly-setting-the-default-playback-device-and-recording-device?forum=windowspro-audiodevelop ment
You might want to get a beverage before reading that.
Aside that, RTMP is secured, which is why you can't gain access to the bytes. The entire purpose of it is to assure media developers that their media can't easily be copied/stolen. Adobe doesn't document their method of securing streams but they do publish the RTMP specification. It's entirely possible for you to create your own RTMP server and encryption method while delivering a RTMP stream to custom client that you code yourself which can read the stream. Here's the spec:
http://www.adobe.com/devnet/rtmp.html
So I'd say it would be unfortunate if Adobe did give you access to the bytes. You might as well just hand users a mp3 of whatever song is playing because they would steal media left and right.
That isn't to say you can't use a multitude of ways of getting the data going across the default output device. Plenty of apps (fraps/etc) capture video and mixed audio streams. But Adobe isn't going to give you the keys to the kingdom and let you decrypt their protected media protocol.

Direct database data access without data level authorization check

Hello,
My customer raised issue about direct database data access. Due to the customeru2019s strong security policy, it shouldnu2019t be allowed.
To prevent this kind of illegal data access, customer ask me to list up all the possibilities to display data without data level authorization check.
The things in my mind are
SQL Command Editor (for Oracle based system) : ORASPACE, DB02, ST04
Query Based : SQVI (Quick Viewer), SQ01/SQ02/SQ03 (SAP Query)
Data Browser : SE11, SE12, SE16, SE16N, SE17
Table Maintenance : SM30
Function Module : RFC_READ_TABLE
Function Module : DB_EXECUTE_SQL (DML)
Anyone knows anything which is not listed above?
Thanks

HI,
Generally in production user's should not be given all these authorizations.
Ram.

Trying to access the java script files via jar file in WEB SERVER

hi all,
I am trying to access the java script files via jar file ,which is present in Apache webserver in order to minimise the number of hits to app server.some thing like cache ...
in jsp the code goes like this...
<script type="text/javascript" archive="http://localhost:14000/dojo.jar!" src="dojo.jar/parser.js" " ></script>{code}
But i am not able to access the js file which is put in jar file present in the webserver.

Hi,
You can use DWR (Direct Web remoting) for that. It is easy AJAX for java. ou can directly call the java script function from java class and also java class from javaScripts..
Regards,
Hardik

I get an error message saying "system overload, the audio engine was not able to process all the required data in time (10011)

i get an error message saying "system overload, the audio engine was not able to process all the required data in time (10011)

The thing is, that error message has been appearing when playing/recording a track that was running perfectly a few minutes ago and nothing has changed!
That can mean, that your project is too ambitious for your Mac. Are you using many complicated automations on that track?
4GB memory is not much, when doing audio processing. GarageBand will need all memory it can get, or will be forced to continually swap pages to your disk, to free RAM, and that can cause this error.
When this error occurs, it is best to restart the computer. This will free your RAM. Close all other applications that are competing for memory, i.e. other multimedia applications, and Safari.
Also, make sure, that you have plenty of free disk space. Don't let the free disk space drop below 20G.
Where is your project located? On an external drive or your internal drive? If it is on an external drive, connect this drive directly, not daisy-chained, or move the project to your internal drive.
I got up to eat, came back and tried to continue but GarageBand shuts down and displays that message every time I try to run the song. I've also recently run songs with several more tracks than this one and they worked perfectly. Any tips?
Are your other projects, that worked perfectly, still working?

Direct Oracle Database Access restriction

Hello All,
How do I find out whether direct Oracle database access has been restricted to defined nodes?
Thank you.

You can try some of these:
1. check if any non-SAP ids are created in the database, in oracle for example in dba_users
2. check if any dummy default ids that come with database are unlocked and being used
3. if you are setup to use external identification such as ops$sidadm in oracle (in places they are), check who can su or sudo to sidadm
4. obviously anyone with password for system and sap ids can login using number of tools; you can investigate options to tighten using SQL*Net listener
Hope this gives some preliminary pointers...

Direct Inward Dialling

Hello,
I am about to deploy CUCM 8 at our company and doing some prep for it.
I am trying to configure DID and wish to know some info.
Below is a sample config that i will deploy on my voice router which is an MGCP gateway. Currently I'm outside US and here we have 7 digit phone system. We use a digitial PABX and our we have two different set of DIDs, one starting 211 71XX and 202 45XX.Extensions inside are 1XXX
My PRI is an E1.
Below is what I am planning as config:
dial-peer voice 1 pots
application mgcpapp
incoming called-number 211....
destination-pattern 9T
direct-inward-dial
port 1/0:15
dial-peer voice 2 pots
application mgcpapp
incoming called-number 202....
destination-pattern 9T
direct-inward-dial
port 1/0:15
dial-peer voice 3 voip
application mgcpapp
destination-pattern 1...
session target ipv4:10.1.2.45
codec g711alaw
Is the above correct, can I include incoming called-number . instead of having the dial-peer voice 2 pots?
After doing this, what do i Configure on CUCM, Do I configure translation pattern or transformation Masks, i a bit confused.
As for CSS the gateway must use the same CSS as the phones?
Thanks to help.

I'd strongly recommend you to review MGCP documentation about how to configure this.
How to Configure MGCP with Digital PRI and Cisco CallManager
http://www.cisco.com/en/US/partner/tech/tk1077/technologies_configuration_example09186a00801ad22f.shtml
Configuring the Cisco IOS MGCP Gateway
http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/products_tech_note09186a008017787b.shtml
Inbound CSS from GW is exactly the same as what you configure in any device, it determines what devices you can reach. Just configure it accordingly to reach whatever internal devices you will reach thru that GW.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk

I use audio memos and files are saved in icloud. while updating audio memo the apps stop working. i cannot access the apps. how can i retrieve the files saved in icloud ?

I can't access the audio memo apps but i can see under usage - manage storage that all the files are located in icloud. how to extract .wav files from icloud if the apps is no longer responding to fileshare in itunes? Thanks.

yes it was solved some time ago. i cant remember exactly but i think i disconnected from the internet and tried accessing the audio apps (or maybe i had accessed the apps first then only turned off internet i cant remember) thereafter the files were in my local apps and then I turned off use icloud. i suggest you backup your ipad on itunes before trying anything. All the best - hope you solve your problem.

No longer able to export .snd or System 7 .sfil audio files

I don't know what version of Quicktime or OS X removed the export option, but I can no longer create .snd or System 7 .sfil audio files using the Quicktime export feature.
Any suggestions as to how I can convert any newer sound file format to this older NeXT/Sun sound file format?
My current OS is 10.4.3 with Quicktime 7.0.3 Pro.
I'm ultimately trying to change my new mail notification in Entourage using Expression (http://soundsetcentral.com) to modify the Microsoft Sound Set.
PowerBook G4 Mac OS X (10.4.3)

I have found the solution to this issue...
1) You need to install OS 9 on your OS X "Tiger" using the OS 9 installation disc that shipped with your Mac.
2) Go to System Preferences and select Sytem/Classic.
3) Select the "Start/Stop" tab and highlight the System Folder on your boot HDD. Click the Start Button.
4) Download SoundApp 2.7.3 from http://www.versiontracker.com/dyn/moreinfo/macos/4124&vid=4134
5) Extract the SoundApp directory to "/Applications (Mac OS 9)"
6) Open SoundApp
7) Select File/Convert...
8) Find the sound file you wish to convert.
9) Set your settings for export:
Format: System Sound
Encoding: u-Law
Rate: No Change
Channels: No Change
Bits: 16-Bit
10) Click the Convert Button.
11) Save the file.
This file will now be recognized by "Expression X" (http://soundsetcentral.com/)
You can now create your own notifications for Entourage in Apple OS X "Tiger".
I hope this helps. Please let me know if you have any questions or comments.
Regards.

Sun Java System Access Manager 7.1 config. failed during installation

{color:#0000ff}Hi,
I have installed sun java communication suite 5 on a single host on sun solaris 10.
I have installed required packages and it works fine.
But as per organization need, I have to change domain name.
So i have uninstalled everything and tried to install again with new domain name.
I have made proper entries in hosts file and resolve.conf file.
But duing the first phase of installation only , i failed in configuring access manager 7.1
I have also cerate same scenario in my test environment, but everytime i face the same error.
and sun java access manager 7.1 fails in first stage of installation only.
So would like to know the proper installation procedure while i change the domain name on same hardware...
I have checked both installation logs & summary logs.
But no error, no failed , no severe.
Attached is the summary of installation logs.
Summary Logs :
Installation Summary Report
Install Summary
Sun Java(TM) Communications Suite : Installed
Sun Java(TM) System Web Server 7.0 : Installed, Configured
Java DB : Installed, Configure After Install
Sun Java(TM) System Message Queue 3.7 UR1 : Installed
Sun Java(TM) System Monitoring Console 1.0 : Installed, Configure After Install
Sun Java(TM) System Directory Preparation Tool : Installed
Sun Java(TM) System Directory Server Enterprise Edition 6.0 : Installed, Configured
Sun Java(TM) System Access Manager 7.1 : Installed, Configuration Failed
Sun Java(TM) System Messaging Server 6.3 : Installed, Configure After Install
Sun Java(TM) System Communications Express 6 : Installed, Configure After Install
Communication Services Delegated Administrator : Installed, Configure After Install
Configuration Data
Sun Java(TM) System Web Server 7.0 :
Web Server Instance installation Directory : /var/opt/SUNWwbsvr7
Web Server installation Directory : /opt
Web Server Administration Server Host : RADAGWMSG221.myreliancemail.com
Web Server Admin Server Mode : true
Web Server only CLI installation : false
Sun Java(TM) System Directory Preparation Tool :
Directory Preparation Tool Installation Directory : /opt/SUNWcomds
Sun Java(TM) System Directory Server Enterprise Edition 6.0 :
Directory Server Installation Directory : /opt/SUNWdsee
Sun Java(TM) System Access Manager 7.1 :
Access Manager Installation Directory : /opt
Access Manager Protocol : http
Access Manager Port : 80
LDAP User ID : amldapuser
Administrator User ID : amAdmin
Web Container : WebServer
Access Manager Web Server Host Name : RADAGWMSG221.myreliancemail.com
Access Manager Web Server Instance Directory : /var/opt/SUNWwbsvr7/https-RADAGWMSG221.myreliancemail.com
Access Manager Web Server Port : 80
Access Manager Console Host (for Existing console) : RADAGWMSG221.myreliancemail.com
Access Manager Console Deploy URI : amconsole
Access Manager Password Deploy URI : ampassword
Access Manager Host : RADAGWMSG221.myreliancemail.com
Access Manager Console Port(for Existing console) : 80
Access Manager Services Deploy URI : amserver
Access Manager Cookie Domain List : .myreliancemail.com
Access Manager Common Domain Deploy URI : amcommon
Access Manager Directory Server Host Name : RADAGWMSG221
Access Manager Directory Server Host : RADAGWMSG221.myreliancemail.com
Access Manager Directory Server Port : 389
Access Manager Directory Root Suffix : o=rmail
Access Manager Directory Manager DN : cn=Directory Manager
Organization Marker Object Class : sunISManagedOrganization
User Marker Object Class : inetorgperson
Organization Naming Attribute : o
User Naming Attribute : uid
Sun Java(TM) System Messaging Server 6.3 :
Messaging Server Installation Directory : /opt/SUNWmsgsr
Sun Java(TM) System Communications Express 6 :
Communications Express Installation Directory : /opt/SUNWuwc
Communication Services Delegated Administrator :
Communication Services Delegated Administrator Installation Directory : /opt/SUNWcomm
{color}

Rushi-Reliance wrote:
Kindly let us know how to proceed further as we are waiiting some reply from your team.As I already advised in your previous posting (http://forums.sun.com/thread.jspa?threadID=5359095), you are best off re-installing solaris from scratch and installing Communication Suite 6 update 1 if you cannot get Access Manager 7.1 configured.
Regards
Shane.

Not able to start the Sun Java System Access Manager 7 Console

Hi All,
I have successfully installed the Sun Java System Portal Server 7 on RHEL 4.0.The problem I am facing is not able to start the Sun Java System Access Manager 7 Console while accessing the URL: http://fqdn:8080/amconsole
As soon as I try to access this URL it gives me following Excepiton:::::::
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
com.iplanet.jato.NavigationException: Exception encountered during forward
Root cause = [java.lang.NullPointerException]
     com.iplanet.jato.view.ViewBeanBase.forward(ViewBeanBase.java:386)
     com.iplanet.jato.view.ViewBeanBase.forwardTo(ViewBeanBase.java:267)
     com.iplanet.am.console.base.ConsoleServletBase.onUncaughtException(ConsoleServletBase.java:338)
     com.iplanet.jato.ApplicationServletBase.fireUncaughtException(ApplicationServletBase.java:1023)
     com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:469)
     com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:324)
     com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:294)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:747)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
     sun.reflect.GeneratedMethodAccessor106.invoke(Unknown Source)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:585)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
If anyone have any idea about the cause of this error,please let me know.All suggestions are welcome .
Thanx and Regards,
Chirag.

Hi All,
I am having exactly the same problem with the same stack trace. Has anybody have an idea how to fix this?
I have downloaded the Java Identity Management Suite.(java_es-5-identsuite-ga-windows-x86.zip) The first time installation was fine and I was able to bring the Access Manager console. I was able to create users groups etc.
However, when I uninstalled and installed it again, I got exactly the same error described in the thread. Running "amserver start" and "amserver restart" did not help. I did the installation one more time
but again I got the same error.
Thanks for the help.
celikkan

Can't login System Access Manager and Delegated Administrator page

Hi.
Suddenly I can't log in System Access Manager & Delegated Administrator page. Yesterday,I could.
Do you help me?
thanks.

k-m-i wrote:
Suddenly I can't log in System Access Manager & Delegated Administrator page. Yesterday,I could.Given that you have provided nothing in the way of usable information to isolate the problem I can only suggest restarting your directory server (assuming it hasn't crashed) then restarting the web-container hosting Access Manager and see if that fixes the problem.
If not, you will have to look further into the web-server logs and the directory server logs to see why the problem is occurring.
Regards,
Shane.

Direct inward System Access (DISA) Audio or script files ??

Similar Messages

Maybe you are looking for