Direct Link to Detail Navigation Report

Hi, I have a number of reports(IViews) in my Detail Navigation Area. Is there anyway to get a direct link to a specific IView in the Portal?
Thanks!

You might want to read up about iViews and quicklinks, which are basically a named shortcut to an iView... Of course, the user needs to have the iView as one of the iViews in their role before they can launch it with the quicklink.
Cheers

Similar Messages

How to disable or grey out a link in detailed Navigation

Hi All,
We have requirement in which few of the links in are to be displayed as greyed out or disabled in detailed navigation and in navigational pages. This is to stop the users from accessing the link for sometime say for a week or so.
I have managed to grey out the link in navigational area. But couldnt find a way to do it from Detailed Navigation. If i click on the link on detailed navigation, it would open the applicaton.
Kindly help me on how to disable or grey out a link in detailed navigation.
Thanks
Namit

Hi Namit,
Open the particular page , and select dynamic navigation (from the right hand side corner Display drop down menu ) .
U will get all the links which r there in the detailed navigation.
and uncheck the visible property .
Surekha.

How to create links under Detailed Navigation Panel

Hi All,
Our reqt is to create many links under "Detailed Navigation Panel" so that portal users may click on any of those links to navigate to that particular iView.
For example. I have created 3 iViews ( A,B and C). In the "Detailed Navigation Panel" i would like to have three links( One, Two and Three). If user clicks "One", it should go to iView A.
Kindly help me how to do this. Many Thanks in Advance. Appreciate if any one could send me the detailed steps involved on this.
Regs/Venkat

Hi Venkat,
As far as I understand your requirement, you don't want to have these links as part of the detailed navigation within the navigation hierarchy, but below, within the navigation panel, statically, right?!
For such a static solution, you could just create an iView displaying these links, and put that iView into the navigation panel of the desktop innerpage, see http://help.sap.com/saphelp_nw04/helpdata/en/b4/771158e4cb4bf6af9974380948db86/frameset.htm for the structure details (below the Detailed Navigation iView).
Hope it helps
Detlev

Links in detailed navigation

how do i add new links in the detailed navigation section? is it added in workset or page?

Hi Arun,
The Hierarchy of Portal object is iview, Page, workset, role. You can view application once the role is assigned to the user. If the entry point is role, role and workset appears in the Top Level Navigation (TLN) and the rest of the hierarchy appears in Detailed Level Navigation. Usually the no of items in TLN is 2. We can change it to 1,2 or 3 depending on the requirement and the rest if any will appear in the DLN. So we cannot say which object appears in the DLN.
Also there is concept of Workset within Workset, Page within Page. It all depends how the object is packaged.
Have a look at this documentation
http://help.sap.com/saphelp_nw04/helpdata/EN/47/3f703e632c7937e10000000a114084/content.htm
Regards,
Ganesh N

Adding a new link to Detailed Navigation

Hi,
I have created a new iview, now I have to display this iview in MSS by providing a link in the detailed navigation of the MSS role.
Can you tell me how add a new link in the detailed navigation iview ?
Regards
Bharath

Yes, For finding the appropriate Workset, In User administrator, check what all roles and Groups are assigned to the user. This will have the PCD path of role aswell. Once PCD path obtained, Open the Role and Via "Trace delta link" option find the approproate MSS role and Workset. Open MSS workset or Role, and Add your iview.
if it doesn reflect even after adding in this, Go to System administration -> navigation and clear all cache and check.
I hope this helps.
Thanks.

Javascript error generated on localization of detailed navigation links.

I m working on an application in EP KM and doing localization. when I log in with language user I m getting javascript error.
error comes when I click on the link in detailed navigation. All the detailed navigation links has been translated in 4 languages.(Spanish,French,Italian,german). Special character problem is also a problem in detailed navigation, on Page and iviews its fine.
anybody idea about translation of detailed navigation and any error that is generated by that link. ( We have done translation using worklist translation manually. )
I cannot modify Script that generates errors. Because It is auto generated by SAP.
I watched preview of available pages in that particular language, I am getting no errors.
So I think there is no error with language.
So what can be the problem actually?

Hi,
We are experiencing the same issue and believe it is a required change on the detailed navigation.
If you are able to fix this, please can you let me know what the possible fix is.
Thanks
Kai

Caching on detailed navigation besides navigation cache?

Hello Everyone,
We use Btexx EasyWCM as a content management system on our SAP NW portal.
When we create a new page in the portal it should appear directly in the detailed navigation, but instead it appears much much later, often after more then an hour. The same happens when deleting a page.
We thought of navigation cache at first but we disabled it and the problem was still there.
Because the new page does appear after a while, what makes it time-based, we still think it might be a caching issue. We don't know what other caches influence the detailed navigation.
The page does appear in the PCD (role) directly after it is made, same goes for deletion.
We tried a restart already, but that didn't resolve anything. And I donu2019t think it's a network problem because the PCD updates instantly. Just the detailed navigation doesn't. Even when we changed the customised detailed navigation back to the standard SAP detailed navigation there was no difference.
We tried creating a page directly on the server so the caches of the proxy's etc could be excluded and the problem was still there.
Thanks.

Hello Sander,
that's good to hear. But you do not need not turn the navigation cache off.
easyWCM supports the new Navigation Cache API. If a editor changes navigation structures, easyWCM automatically invalidates the relevant roles from the cache.
Please check if your SAP Portal release and easyWCM release supports that feature.
More information are available on our support plattform:
http://www.btexx.de/support/
Best regards,
Michael

User selecting default display page from detailed navigation

Hello all,
Can individual users select a default display page from the detailed navigation section? For instance, say I have a list of pages in the detailed navigation each showing a BW report;
Detailed Navigation
Report 1
Report 2
Report 3
Report 4
So when the users navigate from the top level to here then 'Report 1' is automatically displayed. Say that towards the end of the quarter userX will be looking at 'Report 3' mostly while userY will wish to concentrate on 'Report 2', can the users themselves set their default? Or must this be done by the portal admin, rearranging the order of these pages in the assigned role or changing the display priority of them? But then it wouldn't be per user, if they shared the role.
If the users cannot do this themselves is there a way to do it in Java perhaps?
Thanks for you time,
Patrick.

Hi Detlev,
We decided on an easy way through.
Each page has to display a BW report, very simple. So we're going to give the users an iView where they get a list of all BW reports that they have access to (read from a text file). From there they select what they wish to be their default report (written to another text file).
The default page (first on detailed navigation) reads the text file and displays the BW report found there in an IsolatedHtmlContainer. Not precisely what was wanted at the start but pretty much offers the same functionality.
Thanks for your help, I'll read the doc. It's always good to know these things.
Patrick.

Create link in detailled level navigation after creating BSP iview

Hi All,
I have created few bsp iview in portal. After assigning these iview to role, a create link is unnecessary visible in detailled navigation.
I would like to hide it.
I have tried to play with iview properties but no luck
please advice.
Regards
Shashwat Gupta

Dear Shashwat,
Try assigning BSP iview or page directly to roles and test it.
Also check in page or workset properties to hide from detailed navigation instead of iview itself.
Search in to help.sap.com
Hope it will helps
Best Regards
Arun Jaiswal

How to show a variable screen when clicking on direct link of report in ,when that report is used as target in RRI alsoRRI

Hi All,
I have created RRI between two reports and the type is web template/WAD.
My requirement is to show the variable screen of target report when clicked on direct link and it should not show the var. screen if it goes from jump/go to.
while currently I can not see var. screen on both the places and when switching the var. scree. display on in web template , it shows the screen at both the places.
Please suggest.
Thanks,
Anu

Hi Anu,
"And when I am using another var. in assignment details which is ready for input (in both the queries), its not helping."
Did you try using such a variable? What kind of a problem do you face? I am sorry I am still trying to understand your problem. I am just saying that which variable you use is not important for the first query. Only in the second query, add a variable with ready for input (I am not sure why the other doesn't work, I just tried and it gave an error, that's why I suggest this) and in RRI connection make the assignment with this variable. Please try this and let me know the result.

Making Detailed Navigation show, and put som links in there.

Hi!
I am trying to make some links show in Detailed Navigation(DN), but no matter what page i setup it doesnt show and when i expand DN my iviews still doesnt show.
I`ve tried to alter my default framework file at the inner page setup to make DN show, with no luck...
And i have tried to alter each page to make it show.
Any ideas?
Regards
Simon

Hi Simon,
Yes sure!! this was much better explaination
But as far as I know there is no way that you can show the iViews in the detail navigation if it is added to the page.
Look what the hierarchy of these are:
<b>Workset|_ Page1|_ iView11.
                   |_ iView12.
                   |_ iView13.
            |_ Page2--|_ iView21.
            |_ Page3--|_ iView31.</b>
But yes there can be one way out, you can directly add the iView to the workset. Then those specific iViews can be displayed in the detail navigation.
<b>Workset|_ Page1|_ iView11.
                   |_ iView12.
                   |_ iView13.
            |_ Page2--|_ iView21.
            |_ Page3--|_ iView31.
            |_ iView_41
            |_ iView_51
            |_ iView_61 </b>
By this arrangement you can add those three iViews which you are talking about to the workset and then view it in the Detail navigation .
Regards
Pravesh
PS: Please consider rewarding points

Access the detailed navigation link using webdynpro

Hi,
I have a requirement where we have two different DC's of which one is a standard DC and the other one is custom DC with one application in each of them.My requirement is to navigate to the other application in the second DC directly on clik of a link or button from the current application.Also since these applications are displayed in detailed navigation i want to access the detailed navigation link location and activate the other Application instead of using WDPortalNaviagtion.
The steps are:
Development Component - DC1 - This is custom DC
with application APP1
Development Component -DC2 - This is standard
with application APP2
I have APP1 & APP2 in the detailed navigation.
If i have a link or button in APP1 to navigate to APP2 i have to be able to activate the link on the detailed Navigation of APP2 to open up its content.

Hi Swathi,
Check the following threads:--
Replace an iView dynamically by another one by portal navigating service
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1aa4d188-0e01-0010-2382-c5c65202c433
http://help.sap.com/saphelp_nw04/helpdata/en/43/d1233b4c1d0a85e10000000a1553f6/frameset.htm
Hope This Will Help
Regards,
Siddharth

Changing the Detailed Navigation link

Dear All,
I need to change the Detailed Navigation link so that it is right aligned and the arrow image is followed after the link.
Ex.    Sales Reports =>
when it is opened then the following should be the view
          Sales Reports *
                   Report1 o
                   Report1 o
Do let me know if this can be achieved by any theme settings; if not then what should be the approach for the same.
Regards,
Samir

Hi Samir,
This is not possible by just theme settings, For this you need to modify the Detailed Navigation Par file.
Download the the Detailed Navigation par file open the jsp page and saw the columns .
Regards,
Piyush

View a Detailed report from a link in a General Report?

Greetings all,
I have no idea why I am confused on what I am trying to do. I have a Report that Generates a tabluar view off all tickets the actual ticket has 25 fields to be filled in, but of course on the tabular view, I only have four of the relevant fields that the user can see.
Example:
TICKETID TICKETDESCRIPTION TICKETSTATUS TICKETOWNER
0001 | Stuff Broke | Awaiting Customer | Bob
0002 | Part Missing | Open | Fred
0003 | Need Help with Stuff | Open | Sandy
What I am trying to do is create the TICKETID as a link that will open another report with all the details about the Ticket. Currently I have the report and it has a link to go and edit the fields on the form based on P12_TICKETID = #TICKETID# in the link field. But I can't find a way to link it to another report. Am I missing something? I want the user to see all the details about the ticket, but I don't want them to be able to edit the report. I guess I am not clear on how to create a selectable report based on one ticket verses a report that lists them all.
Currently the tabular report is on my Page 11 and I don't see how to reference the report fields by any P11_xxxx naming as I have tried and it tells me it can't see them.
The P12_TICKETID is the Form that analysts use to update the ticket, so I don't want the customers to access that unless there is a way to access it as a view only.
I hope that made sense and if so, could someone tell me what I am missing in my thinking. I would think this would be a standard process for APEX but I am lost on it.
Thanks in Advance.
Wally

If I understand right,you want a new report, that contains all 25 columns, but just for the selected record. There are several ways to accomplish this, including creating a form that would be read-only. To create this as a report, you need to create a new page, you can create a report on that page but use a value attribute pairs report template (this will show the label on the left and the value on the right for each column and each column going down the page, rather than across). Create a hidden item on your page to store the selected ticket_id and then link to that new page, passing #TICKETID# to the hidden item. Lastly, modify the query on your new page to include 'where ticketid = :P?_TICKETID'.
Again, you could create a classic report that just includes all 25 columns or a form and then make each item display only or the scenario I described above. Good luck.
-- Sharon

Direct Link to Report layout in Shared Components

Is it possible to put a link on my page that goes directly into the Shared-Components- Report Layouts? I do'nt want my developer users to have to open up the builder to create/upload new (.rtf) Report Layouts.

Yeah
It's
http://host:port/pls/apex/f?p=4000:1400:&APP_SESSION.With the normal substitutions for your setup and removing pls if your using EPG.
Cheers
Ben
http://www.munkyben.wordpress.com
Don't forget to mark replies helpful or correct ;)

Direct Link to Detail Navigation Report

Similar Messages

Maybe you are looking for