Direct linking to Blog

So, I've been wondering how to do something for awhile....
So, I want to be able to directly link to a BLOG via the Navigation bar at the top of a page.
I want to be able to do this without having to go through a module that THEN links to the OVERALL.html
So in short, I want the NAV bar link to connect directly to Overall.html. (I've tried linking directly, no go.)
ANy thoughts?
Thanks!
Ps- sorry if this is an easy answer, I just can't seem to find.
Thanks again!

Are you using the BC Dynamic Menus? If so it is quite simple, just go to where you normally set the link to any page and select blogs. See attached:

Similar Messages

Creating a direct link to the help topics?

Ok I have been building my first RoboHelp project with the help of some good tutorials online.
I have a number of different help topics and they have sub topics.
How do I direct a user when they click on a direct link to a subtopic. What is the HTML code to use to get to a subtopic?
If I use the HTML file name of the topic, the help TOC on the left doesn't show up.
Does this make sense?

Hi there
Have you investigated the links below? Perhaps you are overthinking it.
Click here
Or Click here
Cheers... Rick
Begin learning RoboHelp HTML 7 within the day - $24.95!
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Problem link with blog french iWeb

Have some problem with the "blog french" version iWeb8. Have a 1-Name 2-Entrées 3-Archive
About #2 Entrées ( é ) make error with Window user can't go to direct link, but with mac no problem
Can't change "Entrées" to exemple "Enter" with no french accent.
If you use Window can you try the link if work? Under " Les départs de groupe"
you can see "Explorer of the sea+Norwegian Gem+Tahitian Princess."
Thank's to help me http://web.mac.com/escapademedia/vps/Accueil.html
Michel

I am having the same problem-- and viewing with Safari as the browser has had no effect. Any thoughts on solutions?
I've been a Mac proponent for two years now, though recent problems are causing me to re-evaluate. Aside from this snafu, the most recent Quicktime update neutered all sound on my .avi files as well. When can we expect updates/solutions to these problems?

Direct Link Coming to SpeedGrade CC

Hi everyone,
On October 15 we'll release the next version of SpeedGrade CC, including Direct Link integration with Adobe Premiere Pro CC, support for multiple masks, linked masks, support (via Direct Link) for all of the file formats support by Premiere Pro, and new bundling of SpeedLooks.
With Direct Link you can open Premiere Pro CC projects inside SpeedGrade CC for color grading and send them back to Adobe Premiere Pro CC. There you can continue editing with color corrections and looks applied. Since color adjustments use the Lumetri Deep Color Engine, you can turn them on and off in Premiere Pro as required. Now you can easily move your projects back and forth between applications as you fine tune your edits and grades in one integrated workflow.
Support for multiple masks means you can add as many masks as you need to layers within your looks. This makes it easier to build complex looks and much faster to save and copy them to other parts of your project.
Read more about the new features on the Moving Colors blog: http://adobe.ly/18HR0BW
Eric

EricPhilpott wrote:
Hi everyone,
On October 15 we'll release the next version of SpeedGrade CC, including Direct Link integration with Adobe Premiere Pro CC, support for multiple masks, linked masks, support (via Direct Link) for all of the file formats support by Premiere Pro, and new bundling of SpeedLooks.
With Direct Link you can open Premiere Pro CC projects inside SpeedGrade CC for color grading and send them back to Adobe Premiere Pro CC. There you can continue editing with color corrections and looks applied. Since color adjustments use the Lumetri Deep Color Engine, you can turn them on and off in Premiere Pro as required. Now you can easily move your projects back and forth between applications as you fine tune your edits and grades in one integrated workflow.
Support for multiple masks means you can add as many masks as you need to layers within your looks. This makes it easier to build complex looks and much faster to save and copy them to other parts of your project.
Read more about the new features on the Moving Colors blog: http://adobe.ly/18HR0BW
Eric
Can you tell me if "ALL" attributes will move between both applications?? Speed changes, transitions, effects ETC... Dynamic Linking with Premiere and AE still does NOT bring everything over. If all attributes don't move between both applications then this will not really work.

Direct Link with Sony F55 RAW files

I'm editing a timeline with Sony RAW F55 files, when I use the new function Direct Link Speedgrade opens but the I get the "Media Offline" error.
Does Speedgrade supports Sony RAW files?
Thanks

I got the same problem with .mov files from a 5d mark III. If you check here: http://blogs.adobe.com/movingcolors/2013/10/31/speedgrade-cc-7-1-update/ you'll see adobe is aware of that issue, but not for my case.

Customized workspace and direct linking failing

Morning,
We are looking to archive the following.
- Customize the theme (colors) in Workspace based on the following PDF.
http://help.adobe.com/en_US/livecycle/es/customizeworkspaceui.pdf
We were successful in customizing the theme. (We simply changed the background color)
We have are trying to link directly to Workspace base don the following blog. I know this is documented by Adobe also
however I can't find it. Found it for ES2.
http://blog.pandyaparth.com/2009/04/workspace-url-parameters/
This direct link does not work for us when trying to make it work with our custom themed ear file.
Running ES Update 1 fully patch.
Adobe recommended Jboss version.
Windows 2003 environment.
Suggestions?
Thanks,
Carmen

Not sure if this is it or not but...
When the portal is restarted it will take your authschemesXX.xml file and rename it to authschemesXX.xml.bak. The portal does this for most types of files (.par files, etc.) when it's restarted.
Regards,
Robin Schmidt.

After delete file from documents the direct link still alive.

Hello.
I upload a image to the style libary folder, then i publish the file and delete him BUT the direct link to the image still work.
I try to upload anther image with the some name but when i try to browse the direct link i get to deleted file.
If i upload a image and delete it before i publish the file I don't have this problem.
I try to flush the blob cache with this commends:
$webApp = Get-SPWebApplication "<WebApplicationURL>"
[Microsoft.SharePoint.Publishing.PublishingCache]::FlushBlobCache($webApp)
Write-Host "Flushed the BLOB cache for:" $webAppbut this doesn't work.I clear the cache on the local pc and doesn't work to..Any idea someone?Thanks!

Hi,
To check if there is cache issue, please access the url in another PC to see if the issue persists. You could also open style library in SharePoint designer to double confirm it.
In addition, if you click the ellipsis of the image item, there will be a preview panel to show the picture, is it the newly upload one?
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Is there a DIRECT link between SD schedule lines and delivery lines?

Is there a direct link (db table) between schedule lines on a sales order (VBEP) and the delivery lines (LIPS)?
Is there a function module to retrieve the data?
Example-
One order line with 3 schedule lines.
Each schedule line is for 2 units (total of 6 units).
Three deliveries made. 1st is for 2 units, 2nd is for 1 unit (backorder), 3rd is for 3 units.
You can use document flow (table VBFA) or examine the SD document in the delivery line (LIPS) and link the delivery line to the order line. The schedule line already references the order line.
I am using math to decrement the schedule lines used and make the link between VBEP and LIPS. It works fine. I need four records back....
1st schedule line for 2 units uses delivery 123
2nd schedule line for 1 unit (partial) uses delivery 124
2nd schedule line for 1 unit (partial) uses delivery 125
3rd schedule line for 2 units uses delivery 125
Like I said, it works. Just wondering if I missed a more direct link.

As far as Db link is concern , I dont remember exactly , but 3 years before I had written a report which see Sales order schedule lines and devilry note lines against sales order. If you see process wise. when ever you create PO ( production order you assign some qty using 101 movement type .. and against production order you also give sales order . When you do delivery ( run seclude run ) it delivers against that material number , its movement is 601 ...
but I remember theres a link between these tables, VBAP,VBFA AND VBEP , LIPS ... against every sales order you can see sales invoice ( VBRP,VBRK) and you can also see your delivery note number in document flow .
I hope thisll give you some guide line, as right now I can not tell you the exact business process but I remember I written a report in SD 4 years before , in which they required Delivery against production order and sales order ... One more thing you also have production order reference on delivery item number. ( field :Empst ) . I think in my project they were maintaining this field .
Thanks

Speedgrade - Rectangle appears over footage in Premiere after direct link

I am using Speedgrade via direct link from Premiere, with a timeline that consists of a video track with all of my clips, another track containing adjustment layers, and a top track containing a .PNG file of a black letterbox.
Problem: After applying primary and secondary color adjustments in Speedgrade (no masks) I return to Premiere. If I hide the top track which contains my .PNG letterbox, a mysterious RECTANGLE appears over my footage. This rectangle is even present in clips that haven't been graded yet.
I have included a picture to illustrate my point.
System Specs:
- Intel Mac OS 10.9.2
- NVIDIA Quadro4000 GPU
- Premiere 7.2.1
- Speedgrade 7.2
- Editing with .R3D files from Red Epic Camera

**UPDATE
This problem may not be a result of speedgrade. Instead, I'm wondering if it's more of an issue within Premiere. I noticed that the rectangle is caused by my adjustment layer that is sitting directly above my main video track. As a test, I found several clips that were sitting below one adjustment layer. I applied a three-way color correction effect to the adjustment layer, and gave it a severe blue tint. One would expect the adjustment layer to effect the entire image on every underlying clip, but instead it only applied to a small rectangle within those clips. As I scrub through the timeline, the rectangle moves around and changes size. Then I realized that each clip had different amounts of scaling and positioning. So this mysterious rectangle seems to be caused by the scaling and positioning of the underlying clips. My adjustment layer is sized to the resolution of my 2K timeline. However, each clip is 5K, scaled to fit. So perhaps I need to make my adjustment layer the same exact size of my underlying clips?
As a test, I scaled my adjustment layer and noticed that if I increase the size by .01, the mysterious rectangle immediately jumps to fill the entire image. Weird.
Another weird thing to point out, referencing my original post: The image of the girl has NO color correction applied to it, and the same goes for the adjustment layer above it. However, there is still a rectangle present. This clip has a small amount of rotation applied, and the rectangle is also rotated, leading me to believe the problem is because of a scaling difference between the adjustment layer and clip. But still, WHY would there be a rectangle there when there is no color correction applied???

Does Direct Link from PP to SG actually work?? Does SG actually work???

I have been hassling with this all day.... the project will go over to SG (via Direct link), and I start grading and about after 30-40 mins it will just crash (SG actually closes down)... there is no file / no save as far as I can tell... so all the work I did is lost (and this has happened 3 times now). It is a short 5 min EPK with nothing heavy in the way of transistions. So I read about DIRECT LINKS problems and then tried the EDL method of bringing it over, consolidated to 1 video track as it is limited too (I honestly CANNOT believe this) who edits on 1 video track? This is ridiculious!! But anyway, I get the big red square with all kinds of "not supported" problems and my EDL never actually gets loaded. VERY FRUSTRATED... how am I ever going to even start thinking about grading a 90 min feature if I can't get a 5 min EPK to WORK. So far I am NOT IMPRESSED with SG.... which stinks after I have spent days in tutorials learning the program! Anyone actually ever use SG for a real project before???

Allent,
In direct-link mode, Speedgrade is using a PrPro project file directly ... and is NOT allowed to "touch" that file until you specifically tell it to go back to PrPro. That's a part that is oft mis-understood. It has a few major things to "know" or you'll get frustrated.
First, as you've discovered, there is NO auto-save while working on a direct-linked project in EITHER PrPro or Sg. So ... if you're over in Sg working for more than a few minutes, it is wise to manually save, perhaps adding an iterative letter/number, so that you've got your work to that point protected in case of crash.
Second ... as Sg is locked out of changing the timeline of a PrPro project file in any way, you cannot add a grading layer to the timeline from Sg in a direct-link session. So ... one needs to create any additional/supplemental grading layers one will need in Sg BEFORE leaving PrPro, by putting "adjustment layers" over the sequence or specific clips you'll want to use a separate grading layer on within Sg.
Third ... another hitch some people have been befuddled by is that when you first apply a Lumetri "look" or a LUT, it's in "preview" mode. You need to hit enter or a couple other things that Sg takes as "accepting" that look/LUT permanently before going back to PrPro or that effect doesn't "save" to the project.
So ... any timeline changes have to be done in PrPro. Corrections/grading done in Sg. Saving a file under work in a direct-link Sg session is manual ... and wise. And yes, this is now suited for working while editing, taking over sub-sequences perhaps is a way to look at it? There are some changes in workflow ... but as you get used to them, it is so much simpler than working edl's or DPX or those sorts of things. And quicker.
Neil

Direct Link to Install OS 9.2?

Hi all,
And is there a direct link to where I can install OS 9.2? That is how I originally installed mine, from a link someone emailed me, once.
I've mentioned this problem already in the Installing OS X folder where, before I could do so, I had a problem with my 9.2; where it took 40 minutes for my desktop to appear after starting up. When I called Apple Tech support, I was told to install OS 9 from a disk which should clear things up. The only one I had was 9.1from when I first bought this Mac so I had to do a clean installation. This did clear the problem with my desktop, but also caused me to lose some things. When I called Apple back, customer service told me to install 9.2, then update my firmware (a link which has already been given to me), before trying to get my Favorites back and my printer re-installed, and then install Tiger which I'd already bought on disks. She also said I could keep 9.2 alongside 10, but I'll see how that goes.
Anyway, if someone knows where I can find this link, I'd really appreciate it. An interesting digression: after installation, I tried getting online. Strangely I was able to connect to my remote access ( I still have dial-up) but couldn't get into any websites! When I called Apple back, they told me to open my TCP/IP box. And it was checked off connecting me to the Ethernet, instead of PPP. When I corrected that, voila! I was able to get into the Internet.
The rep told me to go to Apple support to get the download for 9.2 and offered to email it to me but I said no worry, I'd find it. Well, um, I haven't so if anyone knows where I can find it, I'd appreciate it.

Hi, MacMyDrive -
Since you have OS 9.1, you will need only two download updaters, those for OS 9.2.1 and OS 9.2.2. There are no later ones.
OSX does not install on top of OS 9. If OS 9 is already on the drive, OSX will install alongside it - you will have both OS's on the drive, and can boot to either. They are designed to cohabit the same volume, although many folk prefer to partition a drive such that each OS is on its own volume. Doing that make maintenance easier, and, should it ever be needed, re-installing either OS more convenient.
In order to install OSX you will need to acquire the retail package for the base version that you want. There are no free updaters to take OSX 10.2.x to 10.3.x, or OSX 10.3.x to OSX 10.4.x - there's no point in spending money on a version earlier than the final one you want, so get the retail package for the final base version. There are free downlods for incremental updates. For example, if you want to end up at the most current version of OSX 10.4, get the retail package for OSX 10.4. then apply the download update for OSX 10.4.11.
Before installing OSX, be sure your machine is prepared for it.
Since your G4 can run OS 9.1, it is one of the models that needs a firmware update before installing OSX. You can download the appropriate one from this Apple webpage -
Article #86117 - Firmware Updates
You will need to install the firmware update while OS 9 is still available on the drive (the installer runs only when the machine is booted to OS 9). This can be done using the old drive or the new one.
You will need to have adequate RAM in the machine. OSX 10.3 and earlier require a minimum of 128MB of RAM; double that is more realistic. OSX 10.4 requires a minimum of 256MB of RAM; double that is more realistic. The more RAM, the better. Your G4 can hold at least 1.5GB of RAM; the G4 (AGP) and G4 (GE) models can hold 2.0GB of RAM.
Plan on leaving at least 5GB of free space on the drive after OSX has been installed - this will be used by OSX for temporary swap files, its implementation of virtual memory, and defragging on the fly.
I would recommend not installing OSX until you get the new drive.

First direct link in google search causes "Internet Explorer blocked this site from downloading"

I've disabled both the Adobe Reader Add-on and the Adobe PDF Link Helper to force IE 8 to open PDF's outside of the browser i.e in the stand alone reader application.
After doing this I did some testing, a google search for "test pdf" produces numerous direct links to pdf files. If i click any of them it causes IE to display the message bar "Internet Explorer blocked this from downloading files to your computer, click her for options.." When I click on the message bar, it appears to download the file , then nothing happens. Next time I click the link it opens in the stand alone reader just fine and so do all PDF files, until the browser is restarted or a new tab is started.
This only seems to happen in IE8. IE9 doesn't have the problem.
If I open a web page that has a link to a PDF that always work.
Help? I can't roll this out to prod. Users will get very confused...

You actually trashed the whole Internet Preferences Folder including all your preferences still in there?
Actually, you were suppose to just trash the Internet Preference file/document which is inside the folder.
See if updating to the latest & last version of IE for Mac will help.
Internet Explorer (Classic) 5.1.7
Internet Explorer 5.1.7
Internet Explorer v5.1.7
"WARNING:" Microsoft ended support for Internet Explorer for Mac on December 31st, 2005, and is not providing any further security or performance updates.
Accordingly, as of January 31st, 2006, Internet Explorer for the Mac is no longer available for download from Microsoft.
Or, you can try the following w/your older version of IE:
Once a week Go into the system folder>preferences folder & trash the following preferences:
finder
ASLM
PPC Registration Database
Cache.waf-found inside the MS Internet Cache folder
MRJ Cache folder-a new one will be recreated.(If not found go to System folder>Application Support>MRJ Cache folder-trash all you find inside-(DO NOT TRASH THIS FOLDER)
Download Cache-found inside Explorer Folder
Downloads.html-found inside Explorer Folder
History.html-found inside Explorer Folder
Rebuild your desktop w/extensions off. Use Techtool Lite or Trash*Desktop - may delete Finder comments to rebuild your desktop w/extensions off. Does a better job than manually & you avoid all the finger gymnatics. You just have to hold down the shift key to shut off extensions.
Restart to turn the extensions back on again & empty the trash.
Good luck!

Direct link between planned/production order & Stock transport order

Hello,
We have the following situation.
Plant A = ordering/receiving plant
Plant B = producing/selling plant
Material is stock material in plant A (reorder point planning). If required, plant A creates intercompany purchase order with plant B as vendor.
Standard SAP behaviour: MRP run will create planned order in plant B but there is no direct link between the intercompany purchase order and the planned order. It can as well be that this planned order combines several requirements.
Our requirement: Have a 1 to 1 relationship (and a direct link) between the intercompany purchase order and the planned order (and also with the production order which will be generated afterwards). The solution we think about: After creation of the purchase order, create firmed planned order (or immediately production order) by means of a bapi.
My question is whether there are standard SAP solutions for this?
Best regards
Kurt

When customer give order and then it creates sales order.
depends on material - I mean Finshed good or Comapny own product ,
If it is outside material ,it creates Purchase req and then Purchase order.
if it is company material ,it creates Planned order and then production order.
Check the transaction you will get better idea.
MD04
MD02
MDBT
LS24
LS26
MMBE
CO01
CO02
CO03
CS03
ME51N
ME52N
ME21N
ME22N
VA01
VA02
VA03
Reward Points if it is helpful
Thanks
Seshu

Direct link between SES to activity in tables?

hello all
is there a way to have a direct link between a Service entry sheet and its activities in tables?
so far, the only link we found is the following:
table ESSR enter SES number: get package number and enter it in table ESLL. this will give me a sub package which I can enter in the package number by running a search on table ESLL again.
can i get this process by making only one link instead of twice?
thanks
Alisa

lets see: service entry sheets have activity lines.
the SES is in table ESSR while the activity lines are in table ESLL.
in order to make the link between the SES and its own activity lines, I use the package number from table ESSR but, this package number, is NOT a direct link.
meaning: the steps I follow are like this:
1) enter SES number in table ESSR and get Package number
2) enter package number in table ESLL and get SUB package number
3) enter SUB package number in field package number in table ESLL: this will give me finally the activities related to the SES.
what I want, is a direct link: SES, package number, activity (or any direct link is fine)

What is the direct link between Schedule Line item and Delivery line item?

Hi SAP SD Gurus,
The question is simple. I would like to calculate the Open order quantity for a particular month based on the Schedule Line Date.
I am taking all the Schedule lines falling below the running date of the month and sum up that and look for the deliveries happened for that Schedule lines.
I am unable to link that Schedule line with that Delivery line item.
The only link is Schedule Line Number in VBEP table which is not available in LIPS. I would like sum up the Schdule line Quantities and Subtract the sum of the Delivery quantities which will give me the Open orders for the particular day of the month.
Can anyone help me to link this VBEP table to LIPS table to connect the Schedule line number with the Delivery line item?
Thanks in advance for your help..
Augustine

Anuj,
I am aware of the Functional Modules.
I wanted to know for this Schedule Line, this is Delivery document created.
Where in SAP through Tables it is linked? Because, I need to source the Tables to calulate the open orders by way of external report through Business Object.
The table link from VBEP to LIPS is not directly linked. It is linked from Sales order line item level. Because we are capturing all the Sales order Line tiems through the Delivery Status which is not equalled to C. But if there are partial deliveries against the Scheuld Line item level, we need to identify. The only common joint should be Scheldule line number which is not available in LIPS.
If we are developing report inside SAP, we can use the said Functional Modules to capture through Structures VBEPD. Since it is a external reporting , we need to give correct tables and the joints. Hence I am looking for any other way to solve this.
Thanks
Augustine Ponraj

Direct linking to Blog

Similar Messages

Maybe you are looking for