Direct print in SAP

Hi all!
We have a problem in getting prints from F.64.From print preview screen, when I select print button, new spool request is generated and it's going for output device automatically.We don't have proper settings for direct print I hope,it's not printing.At least to print it from SP02, the spool number is not available there,it's getting deleted automatically.Please help where to make settings to avoid direct printing so that we can print from SP02.Our operating system is WINDOWS.

Hi,
might be printer configuration have problem?
check in su01 -> user id -> defaults ->
under spool control : OutputDevice -> check which output device is assigned
if you check print immediately the output request is created and try to print on this device
if there is problem with this output device the print is not perform and hence you check delete after output , the spool request is deleted so you can not find the reason for that.
uncheck delete after output so if error occured in print you can identify the problem using sp02
regards,
kaushal

Similar Messages

PCUI: is print functionality achievable directly as in SAP gui?

Hello All,
As happens in SAP GUI, we can directly print a document,
without taking its preview.
As per my understanding, in PCUI (BSP application), we always provide PRINT button which always create a preview and then we print it from the preview.
Is this functionality achievable in PCUI?
Please get back with your answers.
Many thanks in advance.
Regards,
Lata Bhandari

Hello Lata,
first: Welcome to SDN.
Please keep in mind that PC-UI is a Web Application. You have to live with the preview PDF because you normally never know if your system could reach the printer of the user. Through the web you could not use the local printers.
Regards
Gregor

Direct Print a webi report, from InfoView

Hi,
I want to direct print a webi report after I open it with InfoView, but i don't know if it's possible.
Right now, when I open a webi report in InfoView I have a button saying "Print to PDF", which will open that report as a PDF document.
But I want to print directly to a printer and not to open the report in a pdf viewer.
Is there a way to have a direct print button in InfoView for webi documents ?
Thank you.
Eugen
Edited by: eudor2000 on Jun 3, 2010 7:49 PM
Edited by: eudor2000 on Jun 3, 2010 7:49 PM

Hi Eugen,
At this point it is not possible.
Here is SAP Notes which clearly state that SAP BOJ is aware of it and got several enhancement request and these requests are reviewed every six months. Since these requests require major changes in the software, SAP BOBJ has not given any time frame of availability of this feature.
Here is SAP NOTE: 1345933
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3133343539333326]
Regards,
Bashir Awan

User not able to print from SAP

Hi guys,
User is not able to print from SAP. The printer is directly connected to his PC. It is not a network printer. The user is able to print at OS level perfectly. IN SP01, it shows in green and the print job has been completed successfully. I can see the output request. Its all fine in SAP. I am not sure why it is not printing from SAP. Please help ?
Thanks

hi venkata,
did you already defined your printer on SAP Server using tcode SPAD ?
What kind of printing you're using ?
My suggest for simplest one is create new output devices.
Type tcode SPAD
Give simple name
Choose SAPWIN for device type (if you're using WIndows clients)
On Access Method tab
Choose Host Spool Access Method F : Front end Printing or G :
For Host Printer fill with __DEFAULT (remember double underscore)
save and test it.
ardhian
http://sapbasis.wordpress.com

Image moves when printed from SAP queue versus Adobe Reader.

I've got a form with a image embedded into it that serves as a background watermark.
This document is usually printed from Adobe Reader, however some users have requested the ability to print directly to a SAP printer without using Adobe Reader to print using windows drivers.
When the form is sent to a SAP printer the image watermark is for some reason moved about 3mm to the right which causes the watermark not to align with the Text Fields that also print on the form. The text fields do not move, they print in exactly the same spot with either print method. Only the image seems to be affected.
Has anyone run into this? The image is an embeded .png file that is set to Scale Image Poportionally in the sizing options.
Thanks for any input!

Thank you for your replies.
I looked at the notes you suggested and it does seem related to the extra margin added to documents printed to PCL-5.
If I use LiveCycle to set an image field .5mm from the left edge of the page, and then print it from SAP directly and then from Adobe Reader I see two different things.
Adobe Reader (with page scaling option turned off) will simply omit anything that falls outside the printable range.
SAP will move the omitted content into the printable area. This is what is causing my image watermark not to align properly with the text in front of it. The image field was too close to the left margin and so in the process of printing, SAP has moved it over to fit in the printable area.
It seems I can fix this issue for my particular requirement by creating a new image field that has the extra white space removed so that I can keep the image field farther away from the left edge of the page.
Not sure if there is some way to change the way the drivers for device type HPLJ4 are handling these margins, but it will likely just be easier to change the images to move them further from the edge which seems to fix it.
Edited by: Clay Robinson on Feb 15, 2011 9:59 PM

Directly print to PDF

Hi,
I know that I can print to PDF choosing local printer and using for ex. PDF creator etc.
Is that possible to print from SAP directly to PDF? If yes, please explain this solution for me. How configure it?
I wil be grateful for information.
Regards
Michal

Hi,
Yes you can by using the report - RSTXPDFT4.Just create a spool request for any printer, even if it is dummy. Now do the following.
1. SE38 -> RSTXPDFT4 -> execute
2. In the first screen give the spool request #, you will get the spool request # in SP01. And then enter the filename of the pdf you want it to be downloaded as.
3. Save it to your dektop and view it as a pdf.
Hope this helps.
Regards, Dibya

Is direct connection from SAP BI 7.0 to XCelsius already available?

Hello,
Is direct connection from SAP BI 7.0 to XCelsius already available?
Thanks

In Xcelsius SP2, visualizations can be connected to an SAP system and use live data returned by an SAP query.
Refer Xcelsius SP2 what's new guide:
http://help.sap.com/businessobject/product_guides/xcelsius2008SP2/en/sp2_xcelsius_new_en.pdf

Printing report to direct print 9i

Hi,
I am able to direct print the reports on web using normal parameters...i.e. desname, destype and desformat.
When it prints successfully, it gives us a message in a separate browser window "The report has been successfully printed out"
And we don't want this message. Can anybody tell me to suppress this window and message ?
Command:
WEB.SHOW_DOCUMENT('/reports/rwservlet?
report=REPORT.rdf&userid=scott/tiger@ora&
P_DEPTNO='||:EMP.DEPTNO||'&
desformat=htmlcss&destype=printer', '_blank');
Thanks,
Martonio.

Martonio,
if you use RUN_REPORT_OBJECT() built-in in Forms to print Reports then you don't have this problem.
If you request the Report directly from a Web browser, not using Forms at all, please ask the same question on teh reports forum here on OTN.
Frank

Directly printing works - but viewer fails with an error

Hey,
we are using: Crystal Reports 2011 and runtime for VS2010.
I open and print my reports via c#. The directly printing works fine. But the viewer don't works. It's really crazy, because directly printing and viewing are using the same methods for database login etc.
At preview a form with the crystalreportsviewer will be opened and the reportsource is being set. After that the viewer shows the progress box. After a short while the progress box disappears and the following error is shown:
Crystal Report Windows Forms Viewer
Die Abfragen zum Abrufen der für diesen Bericht erforderlichen Daten können nicht ermittelt werden.
Daten konnten nicht aus Datenbank abgerufen werden.
Fehler in der Datei CS_201001_u {5BF5FF1B-C662-4A1E-80CA-B4BEB0124295}.rpt:
Daten konnten nicht aus Datenbank abgerufen werden.
OK
Translated in english:
Crystal Report Windows Forms Viewer
The queries to retrieve the required data for this report can not be determined.
Fehler in der Datei CS_201001_u {5BF5FF1B-C662-4A1E-80CA-B4BEB0124295}.rpt:
Data could not be retrieved from database.
OK
But the database logon methods etc. are all the same as at directly printing. What could it be?
            this.crystalReportViewer.ShowPrintButton = false;
            this.crystalReportViewer.ReportSource = pMainCRWReport;
            this.crystalReportViewer.ShowProgressAnimation(this._DruckOptionen.ShowDruckstatus);
            if (pPreviewOptions.Zoomlevel == 1 || pPreviewOptions.Zoomlevel == 2 ||
                (pPreviewOptions.Zoomlevel >= 25 && pPreviewOptions.Zoomlevel <= 400))
                this.crystalReportViewer.Zoom(pPreviewOptions.Zoomlevel);
                            pMainCRWReport.PrintToPrinter(pReport.Druckoptionen.AnzahlKopien,
                                                          pReport.Druckoptionen.KopieSeitenSortiert,
                                                          pReport.Druckoptionen.StartPage,
                                                          pReport.Druckoptionen.EndPage);
pMainCRWReport is ReportDocument.

Yes, it looks like that. I don't use postbacks or sessions.
I have inserted the following code just before the ReportSource of the viewer will be set.
ReportDocument doc = (ReportDocument)pMainCRWReport;
foreach (Table table in doc.Database.Tables)
       MessageBox.Show(string.Format("{0}: {1}", table.Name, table.TestConnectivity().ToString()));
All TestConnectivity returning true!
CrystalDecisions.CrystalReports.Engine.InternalException: Daten konnten nicht aus Datenbank abgerufen werden.
Details: Datenbankanbietercode: -243
Daten konnten nicht aus Datenbank abgerufen werden.
Fehler in der Datei CS_201001_u {870C483C-D947-4FEA-A1C6-1AD0DC4A2805}.rpt:
Daten konnten nicht aus Datenbank abgerufen werden.
Details: Datenbankanbietercode: -243 ---> System.Runtime.InteropServices.COMException (0x800002D3): Daten konnten nicht aus Datenbank abgerufen werden.
Details: Datenbankanbietercode: -243
Daten konnten nicht aus Datenbank abgerufen werden.
Fehler in der Datei CS_201001_u {870C483C-D947-4FEA-A1C6-1AD0DC4A2805}.rpt:
Daten konnten nicht aus Datenbank abgerufen werden.
Details: Datenbankanbietercode: -243
   bei CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.GetPage(PageRequestContext pPageRequestContext)
   bei CrystalDecisions.ReportSource.EromReportSourceBase.GetPage(PageRequestContext pageReqContext)
   --- Ende der internen Ausnahmestapelüberwachung ---
   bei CrystalDecisions.Windows.Forms.ReportDocumentBase.GetPage(Int32 pageN)
   bei CrystalDecisions.Windows.Forms.DocumentControl.ShowNthPage(Int32 PageNumber)
   bei CrystalDecisions.Windows.Forms.DocumentControl.ShowFirstPage()
   bei CrystalDecisions.Windows.Forms.PageView.ShowFirstPageEx()/
OK
The error -243 is an informix error:
Could not position within a table table-name.
The database server cannot set the file position to a particular row within the file that represents a table. Check the accompanying ISAM error code for more information. A hardware error might have occurred, or the table or index might have been corrupted (truncated). Unless the ISAM error code or an operating-system message points to another cause, run the oncheck utility (secheck with IBM Informix SE or tbcheck with IBM Informix OnLine) to check and repair table and index.
It seems to be that the viewer can't read the records with are locked within a transaction. I don't understand why the direct printing works. Is it possible to set the ISOLATION LEVEL for the report database connections?
I have tried this note but it don't works.

Is it possible to give Direct print of Excel format XML Report

Guru,
As far my understnading Excel Format reports are not supported for direct print in EBS,
I could see the following error in CM request logfile and came across couple of metalink Note : 387104.1 & 1317314.1
However iam not sure on this functionality .
Please provide your experience on this case.
<stdin>: File does not begin with '%PDF-'.
lp: stdin is empty, so no job has been sent.
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1
Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. Program exited with status 1.

Hi,
Initially I get the Form Name by calling FM: SSF_FUNCTION_MODULE_NAME and I store it in l_fm_name. now calling the FM: l_fm_name like below:
LOOP AT i_item INTO wa_item.
CALL FUNCTION l_fm_name
          EXPORTING
            wa_item                    = wa_item
         EXCEPTIONS
           formatting_error           = 1
           internal_error             = 2
           send_error                 = 3
           user_canceled              = 4
           OTHERS                     = 5.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
ENDLOOP.
As I have multiple form need to print, I am calling the smartform in loop.

Is it possible to get direct print without preview of the Smart Form?

Hi,
I developed a custom report where line items are coming with a check-box in front of each item. User can select single/multiple line-items by checking those check-boxes. The report also has a PRINT button in application tool bar by clicking which a Smart Form will be printing for each item. Thats mean, for 10 selected line items, 10 forms will be printed.
But, after clicking the PRINT button, print preview of the form is coming and from there I can go for a print/printer. I do not need the print preview and want to have the direct print option while clicking the PRINT button. How can I have this functionality?
Thanks in Advance
Roy

Hi,
Initially I get the Form Name by calling FM: SSF_FUNCTION_MODULE_NAME and I store it in l_fm_name. now calling the FM: l_fm_name like below:
LOOP AT i_item INTO wa_item.
CALL FUNCTION l_fm_name
          EXPORTING
            wa_item                    = wa_item
         EXCEPTIONS
           formatting_error           = 1
           internal_error             = 2
           send_error                 = 3
           user_canceled              = 4
           OTHERS                     = 5.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
ENDLOOP.
As I have multiple form need to print, I am calling the smartform in loop.

Open port issues with Direct Print functionality

Hi, I have been fighting with HP call support about the Photosmart 7525 printer.
Originally I setup and had performed all the functions to enable both web support and WIFI.
Within an hour the printer would not respond to wireless communication, though it had its wireless indecator showing it was connected.
I was told by HP support that the issue will be resolved in March, as there will be a firmware update to fix the issue.
Now that I had the printer install the new firmware I still get the issue.
Though I found through some sniffing, that there are a number of ports enabled and open that are over and beyond print requirements.
Funny thing I can send my printer into instant lockup with all lights flashing with a simple UDP ping sniff. I would think I can do this with other new HP printers using Eprint functions. I will find HP web based printers that are open for public printing and test my theory that HP Eprinters are open to hacking and denyal of service attempts. My Hp print app on andriod list three in my area, and one is at my local Walmart. This would be cool to find this, as I am usually not the first to point such matters out.
I assume some are for Apple devices to print.
Here is my sniffing report:
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 07:57 Central Daylight TimeNSE: Loaded 110 scripts for scanning.NSE: Script Pre-scanning.Initiating ARP Ping Scan at 07:57Scanning 192.168.223.1 [1 port]Completed ARP Ping Scan at 07:57, 0.23s elapsed (1 total hosts)Initiating Parallel DNS resolution of 1 host. at 07:57Completed Parallel DNS resolution of 1 host. at 07:58, 16.50s elapsedInitiating SYN Stealth Scan at 07:58Scanning 192.168.223.1 [1000 ports]Discovered open port 445/tcp on 192.168.223.1Discovered open port 139/tcp on 192.168.223.1Discovered open port 80/tcp on 192.168.223.1Discovered open port 443/tcp on 192.168.223.1Discovered open port 8080/tcp on 192.168.223.1Discovered open port 9220/tcp on 192.168.223.1Discovered open port 6839/tcp on 192.168.223.1Discovered open port 631/tcp on 192.168.223.1Discovered open port 7435/tcp on 192.168.223.1Discovered open port 8089/tcp on 192.168.223.1Discovered open port 9100/tcp on 192.168.223.1Completed SYN Stealth Scan at 07:58, 1.71s elapsed (1000 total ports)Initiating UDP Scan at 07:58Scanning 192.168.223.1 [1000 ports]Discovered open port 5353/udp on 192.168.223.1Completed UDP Scan at 07:58, 1.82s elapsed (1000 total ports)Initiating Service scan at 07:58Scanning 20 services on 192.168.223.1Discovered open port 161/udp on 192.168.223.1Discovered open|filtered port 161/udp on 192.168.223.1 is actually open
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 07:51 Central Daylight TimeNmap scan report for 192.168.223.1Host is up (0.0025s latency).Not shown: 93 closed portsPORT     STATE SERVICE     VERSION80/tcp   open http        HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)139/tcp open tcpwrapped443/tcp open ssl/http    HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)445/tcp open netbios-ssn631/tcp open http        HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)8080/tcp open http        HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)9100/tcp open jetdirect?MAC Address: A03:C1:BD:C8:34 (Unknown)Device type: printer|general purposeRunning: HP embedded, Wind River VxWorksOS CPE: cpe:/h:hp:laserjet_cm1415fnw cpe:/h:hp:laserjet_cp1525nw cpe:/h:hp:laserjet_1536dnf cpe:/o:windriver:vxworksOS details: HP LaserJet CM1415fnw, CP1525nw, or 1536dnf printer, VxWorksNetwork Distance: 1 hopService Info: Device: printer; CPE: cpe:/h:hphotosmart_7520OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .Nmap done: 1 IP address (1 host up) scanned in 34.11 seconds

OK now I am able to run a full scan on TCP ports without causing a lock up of the printer.
I found that having the printer connect to a router that has been setup to use channel 5, 6 or 7 will cause port scanning issues with the printer.
It is obvious that there are 18 ports that are seen as open, whether they are used or not. Two of which are active but have no service connected to them. Some are just dead like port 25, but over half are active enough to recieve data and lock network connectivity within the printer.
As the firmware states some other laser jets may be affected depending on how the configuration can be set.
I moved my routers channel to channel 1 as it is the only other option I have in a highly congested location. It is not as good as channel 6, but the printer seems to have channel 6 locked in for direct printing.
Here is the latest full scan with UDP enabled, it is the furthest and most complete scan I am able to complete, with UDP ports enabled. The TCP port scan has a bit more and I have placed a simple list below the information given here:
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 13:27 Central Daylight Time
NSE: Loaded 110 scripts for scanning.
NSE: Script Pre-scanning.
Initiating ARP Ping Scan at 13:27
Scanning 192.168.1.211 [1 port]
Completed ARP Ping Scan at 13:27, 0.44s elapsed (1 total hosts)
Initiating Parallel DNS resolution of 1 host. at 13:27
Completed Parallel DNS resolution of 1 host. at 13:27, 0.03s elapsed
Initiating SYN Stealth Scan at 13:27
Scanning 192.168.1.211 [1000 ports]
Discovered open port 443/tcp on 192.168.1.211
Discovered open port 80/tcp on 192.168.1.211
Discovered open port 139/tcp on 192.168.1.211
Discovered open port 8080/tcp on 192.168.1.211
Discovered open port 445/tcp on 192.168.1.211
Discovered open port 631/tcp on 192.168.1.211
Discovered open port 9100/tcp on 192.168.1.211
Discovered open port 7435/tcp on 192.168.1.211
Discovered open port 9220/tcp on 192.168.1.211
Discovered open port 6839/tcp on 192.168.1.211
Completed SYN Stealth Scan at 13:27, 5.25s elapsed (1000 total ports)
Initiating UDP Scan at 13:27
Scanning 192.168.1.211 [1000 ports]
Discovered open port 137/udp on 192.168.1.211
Completed UDP Scan at 13:27, 4.46s elapsed (1000 total ports)
Initiating Service scan at 13:27
Scanning 16 services on 192.168.1.211
Discovered open port 161/udp on 192.168.1.211
Discovered open|filtered port 161/udp on 192.168.1.211 is actually open
Completed Service scan at 13:29, 82.51s elapsed (17 services on 1 host)
Initiating OS detection (try #1) against 192.168.1.211
NSE: Script scanning 192.168.1.211.
Initiating NSE at 13:29
Completed NSE at 13:30, 82.29s elapsed
Nmap scan report for 192.168.1.211
Host is up (0.023s latency).
Not shown: 1983 closed ports
PORT     STATE         SERVICE      VERSION
80/tcp   open          http         HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
139/tcp open          tcpwrapped
443/tcp open          ssl/http     HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
| ssl-cert: Subject: commonName=HPPS7525/organizationName=HP/stateOrProvinceName=Washington/countryName=US
| Issuer: commonName=HPPS7525/organizationName=HP/stateOrProvinceName=Washington/countryName=US
| Public Key type: rsa
| Public Key bits: 1024
| Not valid before: 2014-02-25T10:12:24+00:00
| Not valid after: 2034-02-20T10:12:24+00:00
| MD5:   9144 ca3b 557e 09cc aba0 8387 2732 2375
|_SHA-1: a6b2 95c0 b72a 7201 578c 32de 662a e6fe b082 48ca
|_ssl-date: 2014-03-21T13:30:09+00:00; -4h59m12s from local time.
445/tcp open          netbios-ssn
631/tcp open          http         HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
6839/tcp open          tcpwrapped
7435/tcp open          tcpwrapped
8080/tcp open          http         HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
9100/tcp open          jetdirect?
9220/tcp open          hp-gsg       HP Generic Scan Gateway 1.0
137/udp open          netbios-ns   Samba nmbd (workgroup: HPPS7525)
138/udp open|filtered netbios-dgm
161/udp open          snmp         SNMPv1 server (public)
| snmp-hh3c-logins:
|_ baseoid: 1.3.6.1.4.1.25506.2.12.1.1.1
| snmp-interfaces:
|   Wifi0
|     IP address: 192.168.1.211 Netmask: 255.255.255.0
|     MAC address: a0:d3:c1:bd:c8:32 (Unknown)
|     Type: ethernetCsmacd Speed: 10 Mbps
|     Status: up
|_    Traffic stats: 6.16 Mb sent, 3.43 Mb received
| snmp-netstat:
|   TCP 0.0.0.0:7435         0.0.0.0:0
|   TCP 192.168.1.211:56076 15.201.145.52:5222
|   UDP 0.0.0.0:3702         *:*
|   UDP 127.0.0.1:666        *:*
|_ UDP 192.168.223.1:67     *:*
| snmp-sysdescr: HP ETHERNET MULTI-ENVIRONMENT
|_ System uptime: 0 days, 3:34:23.28 (1286328 timeticks)
| snmp-win32-shares:
|_ baseoid: 1.3.6.1.4.1.77.1.2.27
1022/udp open|filtered exp2
1023/udp open|filtered unknown
3702/udp open|filtered ws-discovery
5355/udp open|filtered llmnr
MAC Address: A03:C1:BD:C8:32 (Unknown)
Device type: general purpose
Running: Wind River VxWorks
OS CPE: cpe:/o:windriver:vxworks
OS details: VxWorks
Uptime guess: 0.150 days (since Fri Mar 21 09:55:04 2014)
Network Distance: 1 hop
TCP Sequence Prediction: Difficulty=255 (Good luck!)
IP ID Sequence Generation: Busy server or unknown class
Service Info: Hosts: HPA0D3C1BDC832, HPPS7525; Device: printer; CPE: cpe:/h:hphotosmart_7520
Host script results:
| nbstat:
|   NetBIOS name: HPA0D3C1BDC832, NetBIOS user: <unknown>, NetBIOS MAC: <unknown>
|   Names
|     HPA0D3C1BDC832<00>   Flags: <unique><active><permanent>
|     MSHOME<00>           Flags: <group><active><permanent>
|     HPA0D3C1BDC832<20>   Flags: <unique><active><permanent>
|     HPPS7525<00>         Flags: <unique><active><permanent>
|_    HPPS7525<20>         Flags: <unique><active><permanent>
| smb-security-mode:
|   Account that was used for smb scripts: guest
|   User-level authentication
|   SMB Security: Challenge/response passwords supported
|_ Message signing disabled (dangerous, but default)
TRACEROUTE
HOP RTT      ADDRESS
1   23.26 ms 192.168.1.211
NSE: Script Post-scanning.
Read data files from: F:\Progs\Nmap
OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 180.90 seconds
           Raw packets sent: 2030 (74.829KB) | Rcvd: 2921 (149.377KB)
+++++++++++++++++++++++++++++++++++++++++++++++++++++===
Full TCP port scan without UDP scanning of all ports, showing up as open... * designates open and active.
192.168.223.1Discovered open port 25/tcp on
*192.168.223.1Discovered open port 80/tcp on
*192.168.223.1Discovered open port 110/tcp on
*192.168.223.1Discovered open port 119/tcp on
*192.168.223.1Discovered open port 139/tcp on
192.168.223.1Discovered open port 143/tcp on
*192.168.223.1Discovered open port 443/tcp on
*192.168.223.1Discovered open port 445/tcp on
192.168.223.1Discovered open port 465/tcp on
192.168.223.1Discovered open port 563/tcp on
192.168.223.1Discovered open port 587/tcp on
*192.168.223.1Discovered open port 631/tcp on
192.168.223.1Discovered open port 993/tcp on
192.168.223.1Discovered open port 995/tcp on
*192.168.223.1Discovered open port 7435/tcp on
*192.168.223.1Discovered open port 6839/tcp on
*192.168.223.1Discovered open port 8080/tcp on
192.168.223.1Discovered open port 8089/tcp on
*192.168.223.1Discovered open port 9100/tcp on
*192.168.223.1Discovered open port 9220/tcp on

Error when print out SAP Crystal Report in SAP B1

Dear all,
I have encountered the following message when I tried to print out SAP Crystal Report at client pc:
Could not load file or assembly 'CrystalDecision.Windows.Forms, Version = 12.0.2000.0, Culture=neutral, Publickey Token=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
On the other hand, there's no error when I print out the SAP Crystal Report on server.
Can anyone advice on the error message as above?
Thanks alot.

Hi All,
I have SAP 2007 B,Visual Studio 2008 and Crystal report 2008 Add-on. I am facing the same problem,
"Could not load file or assembly 'CrystalDecision.Windows.form,Version=12.0.2000.0, Culture=neutral,Publickey Token =692fbea5521e1304' or one of its dependencies. The system can not find the file specified."
I have uninstalled SAP B1 and Crystal report 2008. Still I am getting the same Error message. Kindly give me your suggestions.
Regards,
Tom.

Crystal Report 8.5 failed to do direct printing, but can preview and print

Our application is utilizing Crystal Report 8.5
When we try to print a financial report that compares 2 periods (np for single period), it would fail to do direct printing and our application hanged with CPU 100% loading.
However, if we do a preview and press the print button, there will be no problem.
Does anyone know how to solve this problem?

Any info as to what the app is doing when it's printing directly rather than via the viewer?
SDK used, what functionality, etc?
Sincerely,
Ted Ueda

Forms-Reports Web : Direct print a file to a local printer

<p>For those people who are searching a solution to print their PDF Reports from the AS to a chosen local printer, let see this great Direct Print Java Bean from Casey Bowden.</p>
Francois

Hello,
If anyone is using DirectPrint java bean, maybe you can help us with this problem.
The issue we are facing is when we are printing Oracle reports that have non-standard colors.
For example, if field has light gray background it prints black instead. If field has black background and white text it prints black only, no text.
If field or frame line color is specified as anything but “No Line” (even as white), it prints black line color.
So even though report displayed on screen as PDF looks completely normal, when sent to the printer unfortunately does not.
Any advice would be greatly appreciated.
Thank you

Direct print in SAP

Similar Messages

Maybe you are looking for