Direct Satellite Service radio frequency leakage

I am adding an Airport Extreme Base Station to my system. I recieve internet service via DSS and am cautioned in manual about radio frequency leakage, presumably from satellite cable or the DSS modem. How can this anticipated problem be solved or prevented?

You made me look.. I have never in my life heard of interference on a free license band from communications that is presumably paid service..they are always required to run in a licensed band and pay big money for it to the government.
Looking at the list .. what things should you be worried about..
Microwave ovens.. yes, they do produce interference if the door seals are not good.. stop using it now.. it can hurt you.. wifi cannot.. but I have yet to see this as a major issue.. how much of the day do you have the microwave running.
power lines, railroad tracks, and power stations
You have to be joking.. if you have 250KV line outside your house and it starts to arc.. run for cover. If you run old fashioned CRT monitors.. you will probably go crazy with wavy lines due to the magnetic fields.. but I used to work in an office that ran next to main electrical conduit for a large city.. no problem with wireless.
Railroads.. arcing of lines again..
Power stations.. arcing but do people in those places use wireless.. I suspect so without too much trouble.
Cordless telephones that operate in the 2.4GHz or 5GHz range. Yes, these are real problem.
But it is other people using wifi and all the other stuff in your house using it that is the problem.
I would classify DSS radio along with railway lines and power stations.. in other words if you have problems our lawyers were smart enough to have made sure it isn't our fault.
http://en.wikipedia.org/wiki/Electromagnetic_interference_at_2.4_GHz
This is more the kind of stuff I would expect.. and I see no reference to DSS satellite services. Or broken coax fittings.
This is the quote from Apple doco. To others who are interested.
Avoiding Interference
The farther away the interference source, the less likely it is to cause a problem. The following can interfere with AirPort communication:
Â Microwave ovens Â Direct Satellite Service (DSS) radio frequency leakage Â The original coaxial cable that might have come with a satellite dish. Contact the device
manufacturer and get newer cables. Â Certain electrical devices such as power lines, railroad tracks, and power stations Â Cordless telephones that operate in the 2.4GHz or 5GHz range. If you have problems with
your phone or AirPort communication, change the channel your AirPort Extreme uses, or
change the channel your phone uses. Â Nearby base stations using adjacent channels. For example, if device A is set to channel 1,
base station B should be set to channel 6 or 11.

Similar Messages

Direct TV Service in Area

was wondering if the direct tv service is not working right now in Stratford NJ

Hey if the satellite dish is covered with snow or it turned out of alignment with the satellite in orbit you won't be able to a signal to get service.
Ron
Verizon Telecom
Fiber Solution Center
Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan. Follow us on Twitter™!

2630 FM Radio frequency setting

I recently bought a Nokia 2630 and the Set frequency feature in the FM radio is either very unintuitive to use or simply buggy.
It starts off by looking OK, like "108.0". No matter how I try, with the navigation button or direct numbers, there seems to be little correlation between the input and what get's shown on the display. e.g., no hope of simply entering "9" "9" "9" or "9" "9" "." "9" to get frequency 99.9.
Is this a known problem or am I just missing something? Any fix to SW coming soon?
Otherwise I think it's a very usable phone with a good set of features considering the price and a very nice and slim form factor.

I have the same problem. The FM radio frequency selector doesn't really seem to work.
Anyone knows if this can be fixed? This is really annoying.

Connecting Time Capsule with WildBlue Satellite Service

HELP! Please...
I am trying to set up Time Capsule to work with my satellite service, WildBlue, and I can't get it working properly.
Before WildBlue was installed, I connected my iMac and my wife's iMac (it's on Mac OS 10.5.0), one at a time, with Time Capsule directly via Ethernet and back-up each iMac.
WildBlue satellite service was installed yesterday and the installer had no idea how to hook everything up. It was his first install. I was able to connect the WildBlue modem via Ethernet directly to my wife's Mac and made it work. When I try to add the Time Capsule, that's where I run into problems.
I ran the Ethernet cable from the WildBlue modem to the Internet WAN port on Time Capsule and I could not get it to work at all via AirPort. I tried using AirPort Utility and System Preferences - Network and could not get anything to work. I then ran an Ethernet cable from one of the four Ethernet plugs on the back of Time Capsule to the Ethernet plug on the back of my wife's iMac and was able to connect to the internet and get email on her Mac. I tried to run Time Machine, but it can't find Time Capsule! The only way it seems that I can get her iMac to do anything is to either connect it directly to the modem without Time Capsule or run the Ethernet cable thru Time Capsule to the iMac and not be able to connect to Time Machine. I still could not connect my iMac (it's on Mac OS 10.5.4) via Airport no matter what I did.
Can someone help me so that I can get Time Capsule connected and working the way it should?
My understanding is that I should be able to connect Time Capsule to the WildBlue modem via Ethernet and then connect my wife's iMac directly to Time Capsule via Ethernet and still be able to run Time Machine to back-up her iMac. Her iMac and the WildBlue modem sit in the same room together and my iMac is on the other side of the house where I want to use AirPort to connect to Time Capsule so that I can back-up my iMac and have access to the internet. If this isn't the way it is going to work can someone explain it to me on how it should and how I should set everything up to work correctly?
Thank you in advance for any help you can provide me.
Rod

You can, but devices connected to the D-Link switch will drop to a maximum of 100 Mbps speeds. The Time Capsule supports 1,000 Mbps or Gigabit speeds.
If you plan to transfer a lot of files using Ethernet, the numbers speak for themselves.

IMac 24 radio frequency interferance during sleep mode

I have noticed that my iMac 24 produces radio frequency interference which I can hear on the AM broadcast band when I am listening to 1370 AM while using my computer.
When I am using the computer there is no noticeable interference on the AM tuner which is about 10 feet away from the iMac but as soon as the computer enters sleep mode, I can hear a constant tone on the radio about 1760 HZ along with the rest of the audio content normally broadcast. The tone is not overwhelming but is noticeable enough and annoying.
This 1760 HZ tone was determined as my closest approximation by comparing it with a piano key note when I play various notes for comparison purposes and it appears to closely correspond to key number 73 on a standard piano keyboard which is A6 or 1760 HZ.
I would like to know if this is a commonly observed problem and how to avoid it if possible. The iMac 24 I am using is a model A1225, part number MB418LL/A, serial number W89243Y00TG.
As far as I can recall, this has been true since I began using this iMac and did not happen after having the computer for a period of time and then appear suddenly. I just failed to connect the annoying tone to the sleep mode of the computer until recently when it was clear that as soon as the computer came out of sleep mode that the tone on the radio disappeared until sleep returned.

First - you aren't disconnecting any device while your computer is asleep are you? This can cause your problem.
Assuming this isn't the cause, let's do an SMC reset. Shut down the computer. Unplug all cables from the computer, including the power cord and any display cables. Wait at least 15 seconds. Plug the power cord back in, making sure the power button is not being pressed at the time. Then reconnect your keyboard and mouse to the computer. Press the power button on the back to start up your computer. Does it now sleep and awake?
If not srojtas is right that one of your peripherals may be the culprit but rather than disconnecting one at a time I recommend that you disconnect everything but your ethernet cable (assuming you have one) and your USB mouse and keyboard. Create a new account and set the computer so that you have to choose which account to log into.
Restart and log in directly into the new account. If it sleeps and wakes up now you know that the issue is your account or one of your devices. One at a time, connect (and install support software for) a device. Does the computer wake and sleep? Move on to the next. You may find the culprit along the way. Removing it may or may not let the computer sleep depending on whether it is the device itself or the software.
BTW - the device at fault could be a USB or FireWire hub.

Radio Frequency-confirmation OT on an outbound delivery with HU

Hello Every Body,
I have a problem using standard transaction for the Radio Frequency.
I explain my problem.
I would like to make a Good Issue with an outbound delivery by RF.
I create my outbound delivery with transaction MB1A.
And then I want to do the following steps with RF transaction LM61:
Creation OT - Confirmation OT - Good issue.
These steps are ok exepted the case partial consommation on a HU (which is on HU).
For example:
I have HU1 (palet) with 2 HU: HU2 and HU3 (bag) and I need only HU2.
In this case I have a problem for the TO confirmation.
Because I don't find where 'saying' I take this HU of this HU.
Thanks by advance for your help!

Hello Stephen,
The issue here is that in the case of delivery created automaticaly via transaction MB1B the HU need to be precised at the moment of picking. However the company would like it to be working like in case of picking for a normal outbound delivery created in reference to a sales order (delivery type YLF) - while picking only a "technical" HU is taken and the righ HU are pricised by a user at the moment of picking confirmation.
Could you please propose any solution for that?
Regds
Sumana

Want to De-activate the SERVICE radio button while creating a SC

Hello,
My requirement is while a user create a SC and click on 'Describe Requirement' then the SERVICE radio button will deactivate.
I'm using BADI BBP_UI_CONTROL_BADI and method BBP_SC_UI_CTRL, but it is not working....
It will be great if anyone help me regarding this

your badi is valid since it is a field control
My question is however he selects service category it will radio button automaticaly selected.
Disable product type Service
Disable product type Service
Hide button
many people find difficulty in this place. i do agree.
eventually i found a note
SAP Note 1129376 - Disabling Service Button causes change
in Label/header.
Symptom
You have implemented the BADI BBP_SC_UI_CTRL to disable the Service
button in 'Describe Requirement screen'.While creating Shopping cart via
Describe Requirements,the Screen label/header should display
'Describe Requirements' but it displayes 'Add internal Goods / Services'.
More Terms
BBPSC01 BBPSC02 BBPSC03 SAPLBBP_SC_UI_ITS BBP_SC_UI_CTRL Describe
Requirements add internal Goods / Services
Cause and Prerequisites
This is special requirement,where in the Service Button in 'Describe
Requirement screen' is disabled.
The code corrections are not delivered as part of standard and are not
available in the development system, since this is a customer specific
requirement.
Please apply the attached correction instructions
SAP Note 1064560 - Disabling Service Button causes change
in Label/header
br
muthu

Error: starting satellite services

Hi all,
When I install Ops Center on Linux CentOS 5.10 for management Sun Oracle Server. I have issue with last step of installation script ". I have error messsage below :
                                               Ops Center Enterprise Controller Installer
                                                     (version 11.1.0.1536 on Linux)
1. Check for installation prerequisites.                                                                                    [Completed]
2. Check that required RPM packages are present.                                                                            [Completed]
3. Configure file systems.                                                                                                  [Completed]
4. Install Agent components.                                                                                                [Completed]
5. Create Deployable Proxy Bundles.                                                                                         [Completed]
6. Add users.                                                                                                               [Completed]
7. Install prerequisite packages.                                                                                           [Completed]
8. Install application packages.                                                                                            [Completed]
9. Run postinstall tasks.                                                                                                   [Completed]
10. Install IPMI tool.                                                                                                       [Completed]
11. Initialize database.                                                                                                     [Completed]
12. Install Service container components.                                                                                    [Completed]
13. Install Core Channel components.                                                                                         [Completed]
14. Install Proxy Core components.                                                                                           [Completed]
15. Install Enterprise Controller components.                                                                                [Completed]
16. Install Update Connection - Enterprise.                                                                                  [Completed]
17. Install Ops Center BUI components.                                                                                       [Completed]
18. Install OS provisioning components.                                                                                      [Completed]
19. Initialize and start services.                                                                                       [Not Completed]
Failed Step: Initialize and start services.
The following is a portion of the installer
log which may indicate the cause of the error.
If this does not indicate the cause of the
error, you will need to view the full log
file. More information on how to do that is
available below.
INFO: Converting satellite SMF manifest file (/opt/sun/xvmoc/lib/svc/satellite-ajaxterm-svc.xml)
INFO: Converting satellite SMF manifest file (/opt/sun/xvmoc/lib/svc/proxy-base-svc.xml)
INFO: Converting satellite SMF manifest file (/opt/sun/xvmoc/lib/svc/satellite-xvmoc-svc.xml)
INFO: Converting satellite SMF manifest file (/opt/sun/xvmoc/lib/svc/proxy-xvmoc-svc.xml)
INFO: starting new satellite SMF services
Can't exec "/opt/sun/xvmoc/bin/satadm": No such file or directory at /root/xvmoc_full_bundle/Linux_i686/Product//installer/Modules/util.pm line 1619.
Use of uninitialized value in concatenation (.) or string at /root/xvmoc_full_bundle/Linux_i686/Product//installer/Modules/util.pm line 1631.
Error: starting satellite services
Command: /opt/sun/xvmoc/bin/satadm start -v -w
Exit code: 72057594037927935
Signal: 255
Output:
Please fix the problem and then try this step again.
For a full log of the failed install see the file: /var/tmp/installer.log.21123.
t. Try this step again (correct the failure before proceeding)
x. Exit
Enter selection: (t/x)
How do I fix this issue, thanks for any help!
Regards,.

Hi
Go to deploy service in visual administrator and start your application.
instance--serverservices--
deploy.
Or
In visual administrator
instance--serverservices--
web service container and start the application.
Reward points if useful

Import Direct Binding Service WSDL in OSB

I was wondering how to import direct binding service wsdl in OEPL. I tried the below but getting an error. Any help is greatly appreciated.
File - Import - File System. .... After importing the WSDL, I'm getting an error. So I was not sure if I'm on the right track or not.
Thanks
NC

If you have brought in the whole directory structure then you can simply drag the WSDL into the corrct directory that relates to your imports.
Then you can delete the unwanted directories using the delete key.
If you don't want the directory structory to import you need to be conscience every time that you need to uncheck a check box that is checked by default. Can't remember the exact name but basiclly something like import directory structure.
Once the WSDL in correct folder and still having issues, open up and view the source. Make sure all references are correct for the project directory structure.
cheers
James

Is there a way to use my iPod Nano to listen to a radio frequency with wireless headphones. It tells me that I have to plug in my headphones to receive the stations and when I do, the wireless headphones don't work!

Is there a way to use my iPod Nano to listen to a radio frequency with wireless headphones. It tells me that I have to plug in my headphones to receive the stations and when I do, the wireless headphones don't work!

No. I'm sorry. But, i think it uses the headphones as an antenna so it has to be plugged in to headphones in order to make it work. but, it burns the battery down so i don't use the radio function that much.

Error while Deploying 2 Bi-directional dependent services

Hi,
I have 2 BPEL flows which intern call each other after their execution. At the development time with some hack we could deploy these bi-directional dependent services while at the deployment time how to deploy these services, as at the time of deployment it verifies the end-point deployed or not!
Other way to look at this, is there is a way we could suppress end-point deployed verification while deploying a BPEL process?
TIA
regards
Joy

Thanks for the pointer, mark!.
is there is a way to suppress the compiler validation of endpoints? is this Question sane? :)
regards
Joy

Tecra M6-EZ6612: Bluetooth and WLan run at the same range of radio frequency

Hi all
I've a laptop that's Tecra M6-EZ6612 ...
i've got a problem that when i setup the bluetooth i've got a massege that says a conflict between the wireless and bluetooth ...
Both of them are working in same range of radio frequency !!!
So, i wonder how can i change the frequency range of the bluetooth device???!!!

Do not care about it. Bluetooth hardware v1.2 or v2.0 have a technology included called AFH="Adaptive Frequency Hopping" which tries to avoid any conflict with WLAN. It may only be a problem if you have a very old BT hardware (before 2004).

Radio Frequency - Error handling

Hello ,
I have a problem with the error handling in a radio frequency program, because here is not allowed to
show the error messages as a popup or in the status line.
I make a function call of 'L_TO_CREATE_TR'. The raised errors i get back in the exceptions are not a problem to handle. But in this function call, they put normal
success or error messages in,
for example
Programm: SAPLL03A
Include: LL03AF8C
Line : 65 - 76
These messages I can t catch.
Is there any way to cut off the output of the messages??
I would appreciate a feedback very much!!!
Jasmin Söllner

Hi,
We are using the function module in one of our RF developments and here is how it is called:
CALL FUNCTION 'L_TO_CREATE_TR'
    EXPORTING
      i_lgnum                              = p_lgnum
      i_tbnum                              = p_tbnum
      i_squit                              = p_l_squit
      i_tbeli                              = p_l_squit
      i_commit_work                        = c_x
      i_bname                              = sy-uname
      it_trite                             = it_trite
IMPORTING
      e_tanum                              = p_v_tanum
   EXCEPTIONS
     foreign_lock                         = 1
     qm_relevant                          = 2
     tr_completed                         = 3
     xfeld_wrong                          = 4
     ldest_wrong                          = 5
     drukz_wrong                          = 6
     tr_wrong                             = 7
     squit_forbidden                      = 8
     no_to_created                        = 9
     update_without_commit                = 10
     no_authority                         = 11
     preallocated_stock                   = 12
     partial_transfer_req_forbidden       = 13
     input_error                          = 14
     OTHERS                               = 15
We have not faced any issues with the development yet.
regards
Aveek

Lenovo A6000 Plus FM Radio Frequency

How do you set the FM Radio Frequency to even values such as 104.0 MHz or 107.8 Mhz?
The stock FM Radio app does have a drop down which appears if one long presses the MHz value on screen but sadly the drop down contains only odd numbers (I really don't get the possible logic behind this!!) So you can set the frequency to 103.9 and then 104.1 but never 104.0!!!
I would really appreciate if I can set the FM radio frequency to any value between 88 to 108 MHz

Hi Team, Please tell me, how to go FM setting in lenovo A6000 and change the region to US.. Please assist ..

Your Direct Entitlement Service Exception

Dear All,
I have the problem with Entitlement Server.
i was read the tutorial : Your Direct Entitlement Service | Adobe Developer Connection and test it with : Digital Publishing Suite Help | Test your Direct Entitlement API V2
This is the result :
https://www.anakku.id/V2/api/entitlements?uuid=postman&appId=net.anakku.majalah&appVersion =0.1&authToken=54196d77d45c10b…
<result httpResponseCode="200">
<entitlements>
<productId>net.anakku.majalah.mediakit1</productId><productId>net.anakku.dps_retail</productId>
<productId>net.anakku.majalah.perdana.iphone</productId>
<productId>net.anakku.majalah.mediakit</productId>
</entitlements>
</result>
And if i test wiht verifyEntitlement :
 
Fatal error: Uncaught exception 'Exception' with message 'String could not be parsed as XML' in /home/anakku/public_html/V2/api/verifyEntitlement.php:62
Stack trace:
#0 /home/anakku/public_html/V2/api/verifyEntitlement.php(62): SimpleXMLElement->__construct('')
#1 {main}
thrown in
/home/anakku/public_html/V2/api/verifyEntitlement.php on line
62
 
Fatal error: Uncaught exception 'Exception' with message 'String could not be parsed as XML' in /home/anakku/public_html/V2/api/verifyEntitlement.php:62 Stack trace: #0 /home/anakku/public_html/V2/api/verifyEntitlement.php(62): SimpleXMLElement->__construct('') #1 {main} thrown in/home/anakku/public_html/V2/api/verifyEntitlement.php on line 62
verifyEntitlement
(Method:GET)
https://anakku.id/V2/api/verifyEntitlement?uuid=postman&appId=net.anakku.majalah&appVersio n=0.1&authToken=54196d77d45c10…
Result:
 
Fatal error: Uncaught exception 'Exception' with message 'String could not be parsed as XML' in /home/anakku/public_html/V2/api/verifyEntitlement.php:62
Stack trace:
#0 /home/anakku/public_html/V2/api/verifyEntitlement.php(62): SimpleXMLElement->__construct('')
#1 {main}
thrown in /home/anakku/public_html/V2/api/verifyEntitlement.php on line 62 
Whats wrong in this framework or configuration ?
Thanks
Message was edited by: HARDIONO PUSPONEGORO

When you did the test call for verifyEntitlement did you correctly include proper XML? That exception is saying the XML you sent wasn't valid.
Neil

Direct Satellite Service radio frequency leakage

Similar Messages

Maybe you are looking for