Direct Select for Multiple Objects?

Trying to fit a 3D box with a 2D skin that I made, and losing miserably.
I know that using direct select I can move anchor points to fit the DIMs
of my box, I cannot get Illustrator to use the entire layer, or group in its
direct select though (Probably why it's called 'Direct' select, right? lol).
Anyway, anyone know how I can adjust an entire layer of objects? I
wish Illustrators Transform capability was the same as Photoshops,
would make this a snap.
-jd

Do you know how to use Photoshops Transform feature? It is really a whole
lot easier to explain it like that. In Photoshop, you can select multiple layers
(in our case, the layers are really objects ). Transform, and hold down
CTRL (or whatever the MAC equiv) to Skew and Distort your layer by grabbing
the corners, or the center of the object and moving. This will allow you to have
your base |_| all of a sudden turn into a diagonal /_ / .....? Get it?
Okay I have a 3D box, at a 35* angle or so. I have a layer that is pretty much
a rectangle. What I am trying to do is, skew one end, to fit that 35* slope. It
would essentially make that 90* by 90* recangle diagonal, 90* by 35* grade.
If that doesn't make sense I will screencap but I think I'm explaining it fairly
well.

Similar Messages

Setting property for multiple objects?

Adobe Pro X; ES2
I need to set the access property for multiple objects based on the selection of a radio button group. I assume I have to use resolveNodes(), but cannot for the life of me get it to work. Here's what I've played with :
if (this.rawValue == "1") {
xfa.resolveNodes("OtherCase_gp.[*]").access = "open";
} else {
xfa.resolveNodes("OtherCase_gp.[*]").access = "readOnly";
If I use Action Builder, I get endless lines of "oTargetField = this.resolveNode("OtherCase_gp.OtherCaseOther_cb"); oTargetField.access = "readOnly";" There must be a better, more efficient way to do this!

Hi,
Here's another way to try;
var fields = xfa.resolveNodes("OtherCase_gp.#field.(name.substring(0,9) == 'OtherCase')");
for (var i = 0; i < fields.length; i++)
    fields.item(0).access = (this.rawValue == "1") ? "open" : "readOnly";
This approach will only work if your fields are all under OtherCase_gp, Radzmar's solution is more general if your form has a more complicated hierarchy.
Regards
Bruce

Is it possible to specify width in pixels for multiple objects at the same time in Illustrator CS5?

Illustrator has the 'Transform Each' dialog, but it only allows you to scale multiple objects by specifying a percentage. Is there any way to specify the size in pixels?
More specifically, imagine I have 10 rectangles on my canvas, and I want them all to be of a specific height. The rectangle position on the canvas matters, so I can't do the 'vertical align to top and then resize group height' trick - they need to be resized in place.

@Mike: Thank you very much for the quick reply.
Your suggestion does help, but there is still a gap. To be more specific, my rectangles are actually a bar chart, so the heigh of the ractangles is different and should remain unchanged. What I want to do is make each bar narrower to a specific pixel width. The Shape Options feature allows you to specify absolute dimensions, but it seems like you have to specify this for both the Width and Height - can't just do one unless I'm missing something. You can specify relative increase/decrease in pixels (which mostly solves my problem), but I have to calculate the pixel difference, usually fine unless I'm dealing with decimal pixels which I'd like to clean up and turn to clean pixels.
A bit confused about your last point. What does 'select individually' mean? Is Ctrl Enter do anything different from just Enter?

Simple Script for Multiple Objects?

Someone recently helped me with setting an opacity level for an object using this one line script and binding a keyboard shortcut to it: app.selection[0].transparencySettings.blendingSettings.opacity=50; (Pressing "5" sets the object's opacity to 50%)
Although the script works perfectly for one object, when mutiple objects are selected it only affects the first selected object. Can someone show me how to get this script to affect multiple objects at once?
Thanks in advance!

Thanks for the help man, but what's with the snarky comment? lol. Yeah I use my "5" key daily as well. But in ID it does nothing while in the default context, so why not put it, and the other digits to use to quickly set object opacity? (this function is similar to setting opacity for Photoshop layers by the way).
Have a nice day, and cheer up. Spring's almost here.

Direct Select Align to Object in Group

As it is, when you direct select an object and align to it, they both move even if you click one to align to. If this behavior could be made consistent with the normal select where you can click one of the objects again to target the "align to" it would help.

This "Feature" needs to go! I can't cntrl+click shapes to edit them anymore. WHY would adobe remove this / change this???
Answered my own question: Photoshop CC - Cannot control + click to select a different shape while using the pen tool?

Critical :MIRO TRANSACTION-POP UP SELECTION FOR MULTIPLE VENDOR SELECTION

Hi experts ,
I have a requirement in my project in which AP ( accounts payable ) requires pop up selection box in MIRO when there are multiple remit to address exist for the same vendor.Currently AP does not have the ability to see when mulitple remit accounts exist for a vendor.   This is causing payment to be sent to the wrong place.so the requirement is 1.Modify the MIRO transaction to determine if a multiple remit-to vendor scenario exists and issue an info message to the user so that he/she can perform a vendor search.
Modify MIRO to Issue Info Message for Multiple Remit-to Scenario
If possible, find an appropriate BAdi or user exit where an info message can be issued. The message must be issued after entry of the purchase order number.
Determination of a multiple remit-to case is as follows:
-     User in transaction MIRO enters a value in the purchase order number field and presses enter or other function key
-     In exit code:
o     the vendor number is determined from the purchase order entered
o     the vendor master is then searched and the following vendor records are returned as matches:
     ADBR remit-to vendors defined as partners to the purchase order vendor number
     Vendor records with the same tax ID number as the purchase order vendor number
     ADVN vendor records with the same value in LFA1-ZZMCOD2 in the first 12 characters only
     Include the vendor number defined to the purchase order number entered
o     If the search returns more than one vendor record, then issue the info message u201CMultiple remit-to vendors may exist. Please validate vendor on PO with vendor on the invoice.u201D
can anybody provide any inputs in this.
regards
Prasun

I have wondered about this for a while. I was trying something tonight and it seemed to do what you need. I suggest you save your document before trying it.
Select one of your popups.
Copy Style
Select all the popups
Paste Style
With all selected, go to the Inspector and add another item to the list.
All popups should now have the new item. The selected values should not have changed. Copy/paste style is required to make this work.
Please let me know if this works for you. I've tried it a few times and it seems to do the trick.

Need same logical path for multiple objects in a Single project

Dear All,
I have a requirement where I wish to ensure that whenever an object is created in the LSMW transaction (In a Single Project), that object has to be created always under the same logical path name.
This logical path I want to define under the transaction FILE.
Is it possible to get this done?
Please help,
Regards,

Nimish,
Please tell me how to ensue that for every object created we get the same logical path without entering any value.
The path i mean is the one defined in the transaction FILE
Thanks for your input.
Regards,

Select * for multiple tables in cfquery does not work anymore as it used to with CF5

I am migrating from CF5. the following code used to work:
SELECT *
FROM tablea a, tableb b
where a.id =b.id
now I get an error when getting the value of ID (error:
queryname.ID undefined). I suspect the * is the problem and is not
permitted in that format with CF 7.
Any help will be appreciated
Thanks

cfdump is, for the most part, a debugging tool which allows
you to look at varialbes and their values at various points of the
template. Rarely would you want to let real users see that sort of
output.
I'd be suspicious if adding cfdump, and nothing else solved
the problem. I also wouldn't rely on it as a permanent solution.
Using select * for a query against more than one table is still
"sloppy" code and cold fusion tends be less forgiving of sloppy
code with each upgrade.
In case you were wondering, it's "sloppy" because it brings
back more data than you need. You will never need the joining
fields twice.

Keep switch channel selected for multiple steps in a scan list

Hi,
I have 3 switches (PXI-2575), one to apply a source to a given line, one to apply a sink, a one to apply a DMM. I have all three switches triggering off each other as well as a DMM (PXI-4070). I apply a source to any given line with the source switch and then cycle through other lines using the DMM switch. Problem is i want to keep the wear on the relays of the source switch to a minimum (for each cycle through the DMM lines I'm selecting same source pin multiple times!). Is there a command for scan lists or some way of setting up the switches so that this can be done?
I thought it might be possible to use the debounce command ';' on its own to signify that i don't want to change the channel selection but this does not appear to work, the DMM times out whilst waiting for a trigger on the second reading. Simplified example scan list that i currently have:
Break Mode: No Action
Source Switch: ch0->com;;;;~ch0->com & ch1->com...
DMM Switch: ch100->com;~ch100->com & ch101->com;~ch101->com & ch102->com;~ch102->com & ch103->com;~ch103->com & ch100->com...
I've also tried selecting the same channel in subsquent scan list entries which flags up error saying explicit connection already exists between the channels.
So is the only possibility just to needlessly wear out the relays?!

Hi leon007,
I can understand your desire to keep the wear on the relays of the Source switch to a minimum. I have a few questions, but we should be able to get the application working without needlessly wearing out the relays.
1. Can I assume you are using NI-SWITCH to program this application? If you are using the NI-DAQmx Switch API, please let me know.
2. When you state "I have all three switches triggering off each other as well as a DMM", can I assume (leaving out the Sink switch for now) the scan advanced output of the Source switch (TTL0) is sent to the trigger input of the DMM switch (TTL0), the scan advanced output of the DMM switch (TTL1) is sent to the trigger source of the DMM (TTL1), and the measurement complete destination of the DMM (TTL2) is sent to the trigger input of the Source switch (TTL2)?
3. If you are still having troubles after this post, I would like to know the following so I can assist in testing the issue: What versions of NI-DAQmx and NI-SWITCH do you have installed?
OK, that's it for my questions. Now for yours. Unfortunately, the debounce command ';' didn't work because it is simply a dummy entry - without creating a connection no scan advanced signal will be sent. I've noticed this is not documented well in our help file, and I apologize for that. However, attempting to create a connection where one already exists should be an error. Either the user is attempting to redundantly connect channels (which shouldn't happen if niSwitch Get Relay Position is used), or there is a driver issue.
To keep the relay wear to a minimum, I want to suggest a couple of ideas.
1. Use only one trigger line for the DMM's measurement complete and one trigger line for all the switches scan advanced outputs. To use this option, it cannot matter in your application which switch operates first, and which operates last. The switch that always makes a connection (the DMM switch) will send a scan advanced output trigger with a set scan delay (configured in niSwitch Configure Scan Trigger) that should accommodate for all the switches. This option may add delay in your application, but you will save relay life.
2. Use the DAQmx Switch API and the '&&' command between seperate switch connections. In the DAQmx Switch API, you use just one scan list for all switch modules. For example, we would perform the example scan list entries you provided with the following scan list:
/Source/ch0->com && /DMM Switch/ch100->com; ~/DMM Switch/ch100->com & /DMM Switch/ch101->com; ~/DMM Switch/ch101->com & /DMM Switch/ch102->com; ~/DMM Switch/ch102->com & /DMM Switch/ch103->com; ~/Source/ch0->com & /Source/ch1->com && ~/DMM Switch/ch103->com & /DMM Switch/ch100->com...
The above connects the Source switch CH0 to COM, waits for the relays to settle, connects the DMM switch CH100 to COM, sends the scan advanced output signal, and waits for the trigger input before executing the next scan list entry. This method will keep an order to the madness, as you will have the power to decide which switch operates first, and which operates last.
Let me know if I assumed anything incorrectly or if neither option works for you!
Chad Erickson
Switch Product Support Engineer
NI - USA

Powershell Unique Selections for Multiple Combo Boxes

I am currently working on a powershell script that will use 4 combo box controls. I would like for them to all use the same data source whether it be an array or just a .txt file. I would like for each selection to be unique so that no 2 combo boxes can
have the same item selected. Is there a way to hide the item selected in the data source so the other combo boxes do not even have the option to select it and then when the user changes the item in one of the combo boxes the item is available again?

What I am looking do do is have a list of values (T1111,T1112,T1113,T1114) to be selected from by 4 combo boxes. Each value can only be selected once so if one combo box picks T1111 the other 3 do not have that option in its selection. So far I reload the
combo boxes ever time a selection is made and remove the option from the array, but I was looking to see if there is a better way. As it currently stands, getting distinct values isn't working.
Code snippet to remove item from array:
function Get-DataSource
$array = @("T1111", "T1112", "T1113", "T1114")
$combo1 = $combobox1.SelectedItem.ToString()
$combo2 = $combobox2.SelectedItem.ToString()
$array = $array | Where-Object -FilterScript { $_ -ne $combo1 }
$array = $array | Where-Object -FilterScript { $_ -ne $combo2 }
return $array
I apologize for not uploading my code.
function OnApplicationLoad {
#Note: This function is not called in Projects
#Note: This function runs before the form is created
#Note: To get the script directory in the Packager use: Split-Path $hostinvocation.MyCommand.path
#Note: To get the console output in the Packager (Windows Mode) use: $ConsoleOutput (Type: System.Collections.ArrayList)
#Important: Form controls cannot be accessed in this function
#TODO: Add modules and custom code to validate the application load
return $true #return true for success or false for failure
function OnApplicationExit {
#Note: This function is not called in Projects
#Note: This function runs after the form is closed
#TODO: Add custom code to clean up and unload modules when the application exits
$script:ExitCode = 0 #Set the exit code for the Packager
#endregion Application Functions;2
# Generated Form Function
function Call-tenet_psf {
#region Import the Assemblies
[void][reflection.assembly]::Load('mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089')
[void][reflection.assembly]::Load('System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089')
[void][reflection.assembly]::Load('System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089')
[void][reflection.assembly]::Load('System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089')
[void][reflection.assembly]::Load('System.Drawing, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a')
[void][reflection.assembly]::Load('System.Xml, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089')
[void][reflection.assembly]::Load('System.DirectoryServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a')
[void][reflection.assembly]::Load('System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089')
[void][reflection.assembly]::Load('System.ServiceProcess, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a')
#endregion Import Assemblies
#region Generated Form Objects
[System.Windows.Forms.Application]::EnableVisualStyles()
$form1 = New-Object 'System.Windows.Forms.Form'
$combobox2 = New-Object 'System.Windows.Forms.ComboBox'
$combobox1 = New-Object 'System.Windows.Forms.ComboBox'
$buttonOK = New-Object 'System.Windows.Forms.Button'
$InitialFormWindowState = New-Object 'System.Windows.Forms.FormWindowState'
#endregion Generated Form Objects
# User Generated Script
function OnApplicationLoad {
#Note: This function is not called in Projects
#Note: This function runs before the form is created
#Note: To get the script directory in the Packager use: Split-Path $hostinvocation.MyCommand.path
#Note: To get the console output in the Packager (Windows Mode) use: $ConsoleOutput (Type: System.Collections.ArrayList)
#Important: Form controls cannot be accessed in this function
#TODO: Add modules and custom code to validate the application load
return $true #return true for success or false for failure
function OnApplicationExit {
#Note: This function is not called in Projects
#Note: This function runs after the form is closed
#TODO: Add custom code to clean up and unload modules when the application exits
$script:ExitCode = 0 #Set the exit code for the Packager
$FormEvent_Load={
#TODO: Initialize Form Controls here
Load-ComboBox $combobox1 (Get-DataSource)
Load-ComboBox $combobox2 (Get-DataSource)
function Get-DataSource
$array = @("T1111", "T1112", "T1113", "T1114")
$combo1 = $combobox1.SelectedItem.ToString()
$combo2 = $combobox2.SelectedItem.ToString()
$array = $array | Where-Object -FilterScript { $_ -ne $combo1 }
$array = $array | Where-Object -FilterScript { $_ -ne $combo2 }
return $array
#region Control Helper Functions
function Load-ComboBox
<#
.SYNOPSIS
This functions helps you load items into a ComboBox.
.DESCRIPTION
Use this function to dynamically load items into the ComboBox control.
.PARAMETER ComboBox
The ComboBox control you want to add items to.
.PARAMETER Items
The object or objects you wish to load into the ComboBox's Items collection.
.PARAMETER DisplayMember
Indicates the property to display for the items in this control.
.PARAMETER Append
Adds the item(s) to the ComboBox without clearing the Items collection.
.EXAMPLE
Load-ComboBox $combobox1 "Red", "White", "Blue"
.EXAMPLE
Load-ComboBox $combobox1 "Red" -Append
Load-ComboBox $combobox1 "White" -Append
Load-ComboBox $combobox1 "Blue" -Append
.EXAMPLE
Load-ComboBox $combobox1 (Get-Process) "ProcessName"
#>
Param (
[ValidateNotNull()]
[Parameter(Mandatory=$true)]
[System.Windows.Forms.ComboBox]$ComboBox,
[ValidateNotNull()]
[Parameter(Mandatory=$true)]
$Items,
[Parameter(Mandatory=$false)]
[string]$DisplayMember,
[switch]$Append
if(-not $Append)
$ComboBox.Items.Clear()
if($Items -is [Object[]])
$ComboBox.Items.AddRange($Items)
elseif ($Items -is [Array])
$ComboBox.BeginUpdate()
foreach($obj in $Items)
$ComboBox.Items.Add($obj)
$ComboBox.EndUpdate()
else
$ComboBox.Items.Add($Items)
$ComboBox.DisplayMember = $DisplayMember
$combobox1_SelectedIndexChanged={
#TODO: Place custom script here
Load-ComboBox $combobox2 -Items (Get-DataSource)
$combobox2_SelectedIndexChanged={
#TODO: Place custom script here
Load-ComboBox $combobox1 -Items (Get-DataSource)
# --End User Generated Script--
#region Generated Events
$Form_StateCorrection_Load=
#Correct the initial state of the form to prevent the .Net maximized form issue
$form1.WindowState = $InitialFormWindowState
$Form_Cleanup_FormClosed=
#Remove all event handlers from the controls
try
$combobox2.remove_SelectedIndexChanged($combobox2_SelectedIndexChanged)
$combobox1.remove_SelectedIndexChanged($combobox1_SelectedIndexChanged)
$form1.remove_Load($FormEvent_Load)
$form1.remove_Load($Form_StateCorrection_Load)
$form1.remove_FormClosed($Form_Cleanup_FormClosed)
catch [Exception]
#endregion Generated Events
#region Generated Form Code
$form1.SuspendLayout()
# form1
$form1.Controls.Add($combobox2)
$form1.Controls.Add($combobox1)
$form1.Controls.Add($buttonOK)
$form1.AcceptButton = $buttonOK
$form1.ClientSize = '614, 289'
$form1.FormBorderStyle = 'FixedDialog'
$form1.MaximizeBox = $False
$form1.MinimizeBox = $False
$form1.Name = "form1"
$form1.StartPosition = 'CenterScreen'
$form1.Text = "Form"
$form1.add_Load($FormEvent_Load)
# combobox2
$combobox2.FormattingEnabled = $True
$combobox2.Location = '123, 92'
$combobox2.Name = "combobox2"
$combobox2.Size = '121, 21'
$combobox2.TabIndex = 2
$combobox2.add_SelectedIndexChanged($combobox2_SelectedIndexChanged)
# combobox1
$combobox1.FormattingEnabled = $True
$combobox1.Location = '123, 64'
$combobox1.Name = "combobox1"
$combobox1.Size = '121, 21'
$combobox1.TabIndex = 1
$combobox1.add_SelectedIndexChanged($combobox1_SelectedIndexChanged)
# buttonOK
$buttonOK.Anchor = 'Bottom, Right'
$buttonOK.DialogResult = 'OK'
$buttonOK.Location = '140, 254'
$buttonOK.Name = "buttonOK"
$buttonOK.Size = '75, 23'
$buttonOK.TabIndex = 0
$buttonOK.Text = "&OK"
$buttonOK.UseVisualStyleBackColor = $True
$form1.ResumeLayout()
#endregion Generated Form Code
#Save the initial state of the form
$InitialFormWindowState = $form1.WindowState
#Init the OnLoad event to correct the initial state of the form
$form1.add_Load($Form_StateCorrection_Load)
#Clean up the control events
$form1.add_FormClosed($Form_Cleanup_FormClosed)
#Show the Form
return $form1.ShowDialog()
} #End Function
#Call OnApplicationLoad to initialize
if((OnApplicationLoad) -eq $true)
#Call the form
Call-tenet_psf | Out-Null
#Perform cleanup
OnApplicationExit

Dynamic select for multiple tables

Hi Thanks for your reply.Can you please help me in this issue.
I have a requirement like how to select data from multiple tables using dynamic select. How do we maintain dynamic where condition.
Manohar.

[How to write dynamic where clause|How to write a Dynamic Where clause]

ECR/ECO Workflow not working for multiple Objects

Hello all,
We have implemented ECR/ECO workflow by customizing the SAP standard one. We are facing a problem when entering multiple ECO objects such as mutiple Documents, materials, BOMs etc. When we create the ECR, two parralel workflow start (one for ECM and other for ECO) and depending on how many ECO objects we have included, multiple instances of ECO workflows will trigger (I think this is the standard behaviour as well but not sure)
In our workflow, we have a wait step in ECO workflow that waits until ECM has been converted into ECO (ECOP status) and starts the ECO workflow. Also, we have created a Wait step in ECM workflow and that waits until the ECO workflows have reached the CONFIRMATED Step when the processing of the objects are finished.
When we enter one object, both workflows start and ECO waits until ECM has been converted into ECO and then start the processing the Objects. when the ECO workflow is done (Status confirmated), it switches back to ECM workflow and then goes on with Close/Release steps of the Objects/ECO etc.
But, when we have multiple ECO objects, both start well as ECR converts to ECO and the ECO starts and then work items are processed but then stops just before the CONRIMATED steps even though all objects are changed/maintained properly and ECO workflows are completed. As a result, the control doesn't refer back to ECM and we never get the ECO close and Release step work items.
I have checked SWETYPV, SWEL, business objects ECM and ECO but nothing gives a result..
Any help would be appreciated..
Thanks

Can you please update on what is the status in the workflow log. You can check this from SWIA tcode.
If it is in process step please check for ST22 dump if any.
Thanks
Arghadip

Full repair senario for multiple objects?

Hi experts,
I did a full repair in first level ODS. know their is second level ODS and a infocube on the top of it. the cube is a daily full load. Do I have to delete the records from second level ODS and the Cube too?
Thanks in advance.
Sharat.

Kalpana,
We are not using DTP here. but it is a BU 7.0 version. Yes I am using IP to load from first level DSO to five different objects (3 cubes and 2 DSO).
So like you said I will delete the particular record from DSO's and the cubes and do a full repair request.
1.What I understood is it is mandatory to selectively delete the reocord from DSO and the cube before I do the full repair request right?
2.otherwise the load will fail becasue the exact record already is in the DSO? but it have the overwite functionality does it just overwrite it even if the exact record appers in the DSO?
3. How this work in the cube? I think the cube have the addition functionality, does it double the quantity for the identical record already exist in the infocube?
I will assign you the full points. Please help me understand the process.
Thanks in advance.
Sharat.

Set reference point for multiple objects in the middle of the document

Hello Community,
I want to mirror a layout.
So I:
1. Select all the objekts
2. Set the reference point to the middle
3. Mirror the objects
BUT
The reference point is the middle of all the OBJECTS. That leads to several objects crossing the border of my document because the layout isn't spread out evenly.
I want to middle of the DOCUMENT to be the reference point. How can I do that?
Thanks
Christian

Have you fiugured this out on your own?
I just played around a bit and found a method, but it's not exactly intuitive. Select the object(s), then switch to the Rotate tool. The center of rotation will be defined as one of the transformation handles, but you can drag it to anywhere you like, so move it to the point that you want as the center of your mirror. Hold down the Alt/Opt key, and click the reflect button to make a mirrored copy. Without the modifier key the original objects will mirror their position around the repositioned reference.

Selection for Multiple Hierarchy

Hi,
I am having query which uses Profit Center Hierarchy ( A ) to display results.
we have two Profit Center hierarchies created suppose ( A) & (B) . There is one requirment of selection of any one hierarchy for reporting. means user can select either (A) or (B) from input variable.
I hv tried with restriction to Profit center with two hierarchy nodes but system gives error <b>' Different Hierarchies are used for characteristic Profit Center'</b>
To acheive this I dont want to create another query.
Is there any solution available ?
thanks,
Manish

HI Manish,
Don't select any hierarchy ,select hierarchy variable to display all hierarchies.
In variable entry screen (in Analzyer or WEB) it will display all the hierarchies which you want.
Then select ur desired(two hierarchies) Hierarchy.
OR
Try to restrict the two desired hierarchies in QD it self, then it wil display only two hierarchies in Analyzer.
Hope it will solve your problem.
regards,
Shailaja

Direct Select for Multiple Objects?

Similar Messages

Maybe you are looking for