Direct Select issue - just me or a bug?

I've encountered an issue with Illustrator's Direct Select tool: I'm using Illustrator 5.1 on a Macbook Air (bought this last year), and whenever I use option+click with the direct selection tool, the program stalls while it's making the selection. Even if it's a simple path with only two points, option-clicking makes the program stall for three seconds, then the cursor spins for another three seconds, before finally selecting the entire path. 6 seconds to select two anchor points and a path does not seem reasonable, and especially on this computer, delays like that really stand out.
Is there something going on with my computer, or is this some Mac/Macbook Air + AI5.1 bug? I'd love to be able to fix this...
Thanks,
Eric

I know that it won't cure your issue, but I cannot reproduce the problem on a (probably) comparable machine …

Similar Messages

Direct Selection Issues- CS5

When using the direct selection tool, even though objects are selected it isn't showing as selected. It wont show me the anchor points or handles either, making manipulating objects very hard. I must have just hit something, but I'm not sure what it was, any help out here would be greatly appreciated.

The toggle for Show/Hide Edges (which also affects anchor points) is Cmd(Ctrl)-H.

Why is my direct selection tool not responding?

I have Creative suit 5.5 upgraded last year but cannot use ID as a couple of the application tools including direct selection tool just dfont respond. Any ideas?

Thank you. Please see InDesign tools and panels don't respond to mouse clicks (Windows 7/Vista)
If you have large fonts enabled in Windows 7 interface customization you cannot run an Aero theme with ID. You can leave the large fonts and use a classic theme, or return the font size to normal and keep the Aero theme.
The symptoms of this problem are not always restricted to the article description.

Direct Selection Tool - Shape Layers in Photoshop CC Issue

I just upgraded to CC and the first major road block is the new way the direct selection tool works. In my CS6 work flow I would use the direct selection tool to jump between shape layers within the document layer. Then once the correct shape was selected I would click drag select the anchor points I want to adjust. This seems to be impossible now in CC. You can still jump between shape layers but you have to be in "All-Layers" which really hurts when I want to click drag to select specific anchor points because it selects all shapes below it. And with Active-layer selected you can't jump between shape layers with the tool but you can click drag select anchors with out selecting and shapes below the layer. The basically cut functionality right down the middle…
Below I made a very simple video showing the issue (CS6 = first PSD and CC = 2nd PSD)
https://www.dropbox.com/s/pjlvwzmli9ihczd/CCProblemBroadband.m4v
As you can see in CS6 I could fly between layers and adjust everything with out ever changing to another tool or jumping to the layers window… I can no longer do that in CC with out having the dumb issue of also selecting the layers below it, which I don't find useful 99% of the time. Is there a setting to make this work like it did in CS4-CS6???? In my line of work, we work a lot with shape layers and this is causing more time to my work day.
Thanks

1000x this. My designs are 100% vector shapes, so if Adobe have changed this core behavior intentionally, they’ve just made my life a lot more difficult.
We should be able to use the Direct Selection Tool to select a shape layer (similar to how the Move Tool has done) by clicking on any visible pixel. But then we should be able to freely drag-select points on that shape (starting from any neutral area) without selecting other shape layers. This is how it’s worked since before I can remember.
Here’s why the two new selection modes don’t work:
Active Layers - I can no longer freely select any visible shape. Instead I’m forced to make a time-consuming roundabout to the layer palette, where I have to squint to find my shape layer, and activate it manually before continuing. (Hitting “V” to select a layer, then “A” to get back to the D.S. Tool is nearly as cumbersome. Plus, I leave off the Move Tool's auto-select mode.)
All Layers - Treats all my shapes as if they’re on one layer. Overlapping shapes are therefore impossible to work with -- mainly drag-selecting and deselecting points -- in situ.
We either need a “legacy” setting, or some way to constrain selection on drag, via a key modifier or something. This “all or nothing" thing doesn’t work for me... and apparently for others. Why would they change such a thing?
Or maybe there’s something I’m missing. Please let that be the case!

Direct Selection Tool don't works cause points dissapear in shapes

Good evening,
I'm using Photoshop CC under a Macbook Pro Retina Display (15 inches), I've noticed that since lasts updates, when I use the direct selection tool for chaning a shape trace the points that should appear for selecting each anchor dissapears, and there's no way to get them back (sometimes by closing the program and restarting fixes this issue).
The tool is working because when I clic somewhere over a shape it gets highlighted on layers panel, but I can't see the points and so, can't modify the shape.
Does this belongs to any option? (I know in Illustrator there's an option to see or hide the points, but don't know if in Photoshop goes the same way or not) or it's a bug from the last updates? (I would say that it didn't happen at the beggining). But as I use a lot shorcuts, sometimes I can make a misstake and press cmd + wrong key, so I think it could be the reason for this... but I'm not quite sure.
Thanks in advice!
EDIT:
I've seen that if I hide the "extras" (cmd + H) it hides the guides but also the points from shapes (that shouldn't be this way, right?) and even I can see them when I turn them on, I can't pick just one as I did in CS6 by using direct selection tool and pressing on just one point (at the beggining all of them are highlighted cause you've got selected the whole shape layer, but when you press one, it should get this highlighted and turn off the rest of them), and the only way to get just one point is to pan with the cursor and make a selection, passing over the points you want to highlight, but this is annoying cause if you've got any other shape below, it will select it as well.

1000x this. My designs are 100% vector shapes, so if Adobe have changed this core behavior intentionally, they’ve just made my life a lot more difficult.
We should be able to use the Direct Selection Tool to select a shape layer (similar to how the Move Tool has done) by clicking on any visible pixel. But then we should be able to freely drag-select points on that shape (starting from any neutral area) without selecting other shape layers. This is how it’s worked since before I can remember.
Here’s why the two new selection modes don’t work:
Active Layers - I can no longer freely select any visible shape. Instead I’m forced to make a time-consuming roundabout to the layer palette, where I have to squint to find my shape layer, and activate it manually before continuing. (Hitting “V” to select a layer, then “A” to get back to the D.S. Tool is nearly as cumbersome. Plus, I leave off the Move Tool's auto-select mode.)
All Layers - Treats all my shapes as if they’re on one layer. Overlapping shapes are therefore impossible to work with -- mainly drag-selecting and deselecting points -- in situ.
We either need a “legacy” setting, or some way to constrain selection on drag, via a key modifier or something. This “all or nothing" thing doesn’t work for me... and apparently for others. Why would they change such a thing?
Or maybe there’s something I’m missing. Please let that be the case!

Direct Selection Tools Randomly Stops Functioning

Hello, I'm having some issues with Adobe Illustrator. For some reason, the direct selection tool will randomly stop allowing me to edit my anchor points. Instead of directly selecting a specific point on a path and giving me the option to move it/ adjust the curve, it just selects the entire path and simply moves it. This is very frustrating, because it forces my to make my paths perfect the first time I make them with the pen tool and doesn't allow me to edit them later. Before you ask, I am indeed using the plain white arrow (not the black one or the white arrow w/ the + sign) and I do not have any conflicting layers above the path or any strange groups that would cause this weird effect. The white arrow also makes the white box when I hover over an anchor point, but clicking doesn't do anything but select the entire path. Please help!

Christopher,
>This is very frustrating, because it forces my to make my paths perfect the first time I make them with the pen tool and doesn't allow me to edit them later.
Obviously, Illy is trying to help you get perfect.
If you want to cheat, you could try following the instructions in FAQ #2.

Please fix the direct selection tool that you broke

When you create a curved path with at least four anchor points that is not a complete circuit, clicking on that path with the direct selection tool only selects a portion of the path, whereas before, it would select the entire path. This odd new behavior, whether intentional or not, is a result of the new Path Segment Reshaping functionality.
The problem is, it is very annoying to have only a portion of the path selected because it makes it look like the path is non-contiguous. (Selecting with the regular selection tool isn’t necessarily a solution if your paths are grouped, since it will always select the entire group, and not just the one path you’re interested in.)
This does not happen with closed paths, and it does not impede the Path Segment Reshaping functionality at all. Therefore, there is no reason why open paths shouldn’t/couldn’t behave the same way — the way they previously did before this update.

Thanks for thoroughly explaining the problem. I can reproduce the issue. I blamed it on improper screen redraw. I've noticed other screen redraw issues in 17.1.

Can only select items with direct selection tool

I have been working on a design: one layer, with multiple groupings, nothing is locked. I'm trying to select the items with the selection tool, but can only select items with the direct selection tool (which is very inconvenient in this case). I can select the text with the text tool, but that really serves no purpose in my case. Anyone have any ideas as to what's going on? When I was working on it yesterday, everything was fine with all the tools. Thanks in advance.

Imcookin,
It may be a corruption of preferences, or an issue outside Illy.
You may try to close down and just restart, or close down and restart pressing Ctrl+Alt+Shift/Cme+Option+Shift, or close down and use the suggestions in Move the folder or, if none of those suggestions help, have a look at the list in Other options

Gradients gets cropped with the Direct selection tool

I discovered another strange thing with gradients in InDesign.
I could see this problem in both CS6 and CC.
1. Make a gradient fill and apply it to a square object
2. Use the Direct selection tool and select two corners
3. Move the corners and you will see the gradient fill being cropped away
4. Change to the Selection tool and make the object wider. It does not reveal any more colors. They are cropped away for good now.
According to the color palettes this is still a gradient fill but it looks like one color now more or less. I couldn't find any way to release the cropping. I suppose it would have to be reveresed with the Direct selection tool.
The gradients in Illustrator stay inside the object when using the Direct selection so both selection tools works the same way. I also tried with vector objects in Photoshop and the gradient fill effect. Both selection tools in Photoshop works the same way as Illustrator. Gradient stays inside the object.
So is it a bug or feature?

Adobe has provided a very large tool box. Why not just do this in
Illustrator and place or copy/paste the frame. You obviously don't like
InDesign's way of doing things and you have at your disposal a tool that
does work the way you like.
I like InDesigns way of doing things very much. It's easily my all time favorite software after 25 years in this business.
And I can understand different behavior between the Adobe apps. This app can only do a little bit of what the other app can do.
But it don't like when three apps have the exact same tools, and one app is programmed to do something else with these tools, when it just as easily could have been programmed to do the same thing.

Direct Select in Groups

Before CS5, I was able to select one object in a group of objects by using the Direct Selection tool. This doesn't seem to work anymore. Is there a new method?

The direct select tool works just as it always has for selecting a grouped object, as far as I can tell. I have no issues selecting an object or rule in a group with it as long as the thing I'm trying to select is not actually behind another object at the point where I'm trying to click, and that's not new.
What is new in CS5 is that double-clicking with either the selection tool or the direct select tool gives the functionality of having switched to the other tool, but does not actually switch in the toolbox, which means you don't have to constantly switch back and forth, which I find to be a real timesaver. The other new thing is that if you select an object behind another, it stays selected so you can move it without having to find the center dot.
I find no need to bring the grouped rules to the front or select the group as a whole first using either tool as long as there is a spot on the rule that is not covered by the text frame.

How to use direct select and insert or load to speedup the process instead of cursur

Hi friends,
I have stored procedure .In SP i am using cursur to load data from Parent to several child table.
I have attached the script with this message.
And my problem is how to use direct select and insert or load to speedup the process instead of cursur.
Can any one please suggest me how to change this scripts pls.
USE [IconicMarketing]
GO
/****** Object: StoredProcedure [dbo].[SP_DMS_INVENTORY] Script Date: 3/6/2015 3:34:03 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: <ARUN,NAGARAJ>
-- Create date: <11/21/2014>
-- Description: <STORED PROCEDURE FOR DMS_INVENTORY>
-- =============================================
ALTER PROCEDURE [dbo].[SP_DMS_INVENTORY]
@Specific_Date varchar(20) ,
@DealerNum Varchar(6),
@Date_Daily varchar(50)
AS
BEGIN
SET NOCOUNT ON;
--==========================================================================
-- INVENTORY_CURSUR
--==========================================================================
DECLARE
@FileType varchar(50),
@ACDealerID varchar(50),
@ClientDealerID varchar(50),
@DMSType varchar(50),
@StockNumber varchar(50),
@InventoryDate datetime ,
@StockType varchar(100),
@DMSStatus varchar(50),
@InvoicePrice numeric(18, 2),
@CostPack varchar(50),
@SalesCost numeric(18, 2),
@HoldbackAmount numeric(18, 2),
@ListPrice numeric(18, 2),
@MSRP varchar(max),
@LotLocation varchar(50),
@TagLine varchar(max),
@Certification varchar(max),
@CertificationNumber varchar(max),
@VehicleVIN varchar(50),
@VehicleYear bigint ,
@VehicleMake varchar(50),
@VehicleModel varchar(50),
@VehicleModelCode varchar(50),
@VehicleTrim varchar(50),
@VehicleSubTrimLevel varchar(max),
@Classification varchar(max),
@TypeCode varchar(100),
@VehicleMileage bigint ,
@EngineCylinderCount varchar(10) ,
@TransmissionType varchar(50),
@VehicleExteriorColor varchar(50),
@VehicleInteriorColor varchar(50),
@CreatedDate datetime ,
@LastModifiedDate datetime ,
@ModifiedFlag varchar(max),
@InteriorColorCode varchar(50),
@ExteriorColorCode varchar(50),
@PackageCode varchar(50),
@CodedCost varchar(50),
@Air varchar(100),
@OrderType varchar(max),
@AgeDays bigint ,
@OutstandingRO varchar(50),
@DlrAccessoryRetail varchar(50),
@DlrAccessoryCost varchar(max),
@DlrAccessoryDesc varchar(max),
@ModelDesc varchar(50),
@Memo1 varchar(1000),
@Memo2 varchar(max),
@Weight varchar(max),
@FloorPlan numeric(18, 2),
@Purchaser varchar(max),
@PurchasedFrom varchar(max),
@InternetPrice varchar(50),
@InventoryAcctDollar numeric(18, 2),
@VehicleType varchar(50),
@DealerAccessoryCode varchar(50),
@AllInventoryAcctDollar numeric(18, 2),
@BestPrice varchar(50),
@InStock bigint ,
@AccountingMake varchar(50),
@GasDiesel varchar(max),
@BookValue varchar(10),
@FactoryAccessoryDescription varchar(max),
@TotalReturn varchar(10),
@TotalCost varchar(10),
@SS varchar(max),
@VehicleBody varchar(max),
@StandardEquipment varchar(max),
@Account varchar(max),
@CalculatedPrice varchar(10),
@OriginalCost varchar(10),
@AccessoryCore varchar(10),
@OtherDollar varchar(10),
@PrimaryBookValue varchar(10),
@AmountDue varchar(10),
@LicenseFee varchar(10),
@ICompany varchar(max),
@InvenAcct varchar(max),
@Field23 varchar(max),
@Field24 varchar(max),
@SalesCode bigint,
@BaseRetail varchar(10),
@BaseInvAmt varchar(10),
@CommPrice varchar(10),
@Price1 varchar(10),
@Price2 varchar(10),
@StickerPrice varchar(10),
@TotInvAmt varchar(10),
@OptRetail varchar(max),
@OptInvAmt varchar(10),
@OptCost varchar(10),
@Options1 varchar(max),
@Category varchar(max),
@Description varchar(max),
@Engine varchar(max),
@ModelType varchar(max),
@FTCode varchar(max),
@Wholesale varchar(max),
@Retail varchar(max),
@Draft varchar(max),
@myerror varchar(500),
@Inventoryid int,
@errornumber int,
@errorseverity varchar(500),
@errortable varchar(50),
@errorstate int,
@errorprocedure varchar(500),
@errorline varchar(50),
@errormessage varchar(1000),
@Invt_Id int,
@flatfile_createddate datetime,
@FtpDate date,
@Inv_cur varchar(1000),
@S_Year varchar(4),
@S_Month varchar(2),
@S_Date varchar(2),
@Date_Specfic varchar(50),
@Param_list nvarchar(max),
@Daily_Date Varchar(50);
--====================================================================================
--DECLARE CURSUR FOR SPECIFIC DATE (OR) DEALER-ID WITH SPECIFIC DATE (OR) CURRENT DATE
--====================================================================================
set @Date_Specfic = Substring(@Specific_Date,1,4) +'-'+Substring(@Specific_Date,5,2)+'-'+Substring(@Specific_Date,7,2);
set @Daily_Date = SUBSTRING(@Date_Daily,14,4) + '-' + SUBSTRING(@Date_Daily,18,2)+ '-' + SUBSTRING(@date_Daily,20,2)
IF @Daily_Date IS NOT NULL
BEGIN
Delete From [dbo].[DMS_INVENTORY_DETAILS]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
Delete From [dbo].[DMS_INVENTORY_AMOUNT]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
Delete From [dbo].[ICONIC_INVENTORY_VEHICLE]
Where DMSInventoryVehicleID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
Delete From [dbo].[DMS_INVENTORY_VEHICLE]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
Delete From [dbo].[ICONIC_EQUITY_INVENTORY_COMPARE]
Where InventoryVehicleId in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
Delete From [dbo].[DMS_INVENTORY]
Where ID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
DECLARE Inventory_Cursor CURSOR FOR
SELECT * from [dbo].[FLATFILE_INVENTORY] where
CONVERT (date,flatfile_createddate) = CONVERT (date,GETDATE()) order by flatfile_createddate;
END
Else
BEGIN
if (@Date_Specfic IS NOT NULL AND @DealerNum != '?????')
BEGIN
Delete From [dbo].[DMS_INVENTORY_DETAILS]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
Delete From [dbo].[DMS_INVENTORY_AMOUNT]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
Delete From [dbo].[ICONIC_INVENTORY_VEHICLE]
Where DMSInventoryVehicleID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
Delete From [dbo].[DMS_INVENTORY_VEHICLE]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
Delete From [dbo].[ICONIC_EQUITY_INVENTORY_COMPARE]
Where InventoryVehicleId in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
Delete From [dbo].[DMS_INVENTORY]
Where ID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
DECLARE Inventory_Cursor CURSOR FOR
SELECT * from [dbo].[FLATFILE_INVENTORY] where FtpDate=@Date_Specfic AND ACDealerID='ACTEST' + @DealerNum;
END
ELSE
BEGIN
Delete From [dbo].[DMS_INVENTORY_DETAILS]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
Delete From [dbo].[DMS_INVENTORY_AMOUNT]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
Delete From [dbo].[ICONIC_INVENTORY_VEHICLE]
Where DMSInventoryVehicleID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
Delete From [dbo].[DMS_INVENTORY_VEHICLE]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
Delete From [dbo].[ICONIC_EQUITY_INVENTORY_COMPARE]
Where InventoryVehicleId in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
Delete From [dbo].[DMS_INVENTORY]
Where ID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
DECLARE Inventory_Cursor CURSOR FOR
SELECT * from [dbo].[FLATFILE_INVENTORY] where FtpDate=@Date_Specfic;
END
END
OPEN Inventory_Cursor
FETCH NEXT FROM Inventory_Cursor
INTO
@FileType ,
@ACDealerID ,
@ClientDealerID ,
@DMSType ,
@StockNumber ,
@InventoryDate ,
@StockType ,
@DMSStatus ,
@InvoicePrice ,
@CostPack ,
@SalesCost ,
@HoldbackAmount ,
@ListPrice ,
@MSRP ,
@LotLocation ,
@TagLine ,
@Certification ,
@CertificationNumber ,
@VehicleVIN ,
@VehicleYear ,
@VehicleMake ,
@VehicleModel ,
@VehicleModelCode ,
@VehicleTrim ,
@VehicleSubTrimLevel ,
@Classification ,
@TypeCode ,
@VehicleMileage ,
@EngineCylinderCount ,
@TransmissionType ,
@VehicleExteriorColor ,
@VehicleInteriorColor ,
@CreatedDate ,
@LastModifiedDate ,
@ModifiedFlag ,
@InteriorColorCode ,
@ExteriorColorCode ,
@PackageCode ,
@CodedCost ,
@Air ,
@OrderType ,
@AgeDays ,
@OutstandingRO ,
@DlrAccessoryRetail ,
@DlrAccessoryCost ,
@DlrAccessoryDesc ,
@ModelDesc ,
@Memo1 ,
@Memo2 ,
@Weight ,
@FloorPlan ,
@Purchaser ,
@PurchasedFrom ,
@InternetPrice ,
@InventoryAcctDollar ,
@VehicleType ,
@DealerAccessoryCode ,
@AllInventoryAcctDollar ,
@BestPrice ,
@InStock ,
@AccountingMake ,
@GasDiesel ,
@BookValue ,
@FactoryAccessoryDescription ,
@TotalReturn ,
@TotalCost ,
@SS ,
@VehicleBody ,
@StandardEquipment ,
@Account ,
@CalculatedPrice ,
@OriginalCost ,
@AccessoryCore ,
@OtherDollar ,
@PrimaryBookValue ,
@AmountDue ,
@LicenseFee ,
@ICompany ,
@InvenAcct ,
@Field23 ,
@Field24 ,
@SalesCode ,
@BaseRetail ,
@BaseInvAmt ,
@CommPrice ,
@Price1 ,
@Price2 ,
@StickerPrice ,
@TotInvAmt ,
@OptRetail ,
@OptInvAmt ,
@OptCost ,
@Options1 ,
@Category ,
@Description ,
@Engine ,
@ModelType ,
@FTCode ,
@Wholesale ,
@Retail ,
@Draft ,
@flatfile_createddate,
@FtpDate;
WHILE @@FETCH_STATUS = 0
BEGIN
--==========================================================================
-- INSERT INTO INVENTORY (PARENT TABLE)
--==========================================================================
BEGIN TRY
INSERT INTO [dbo].[DMS_INVENTORY]
DMSDealerID,
StockNumber,
DMSType,
InventoryDate,
FtpDate
VALUES (@ClientDealerID,@StockNumber,@DMSType,@InventoryDate,@FtpDate);
END TRY
BEGIN CATCH
SELECT
@errornumber = ERROR_NUMBER(),
@errorseverity = ERROR_SEVERITY(),
@errortable = 'DMS_INVENTORY',
@errorstate = ERROR_STATE(),
@errorprocedure = ERROR_PROCEDURE(),
@errorline = ERROR_LINE(),
@errormessage = ERROR_MESSAGE();
--==========================================================================
-- INSERT ERRORS INTO DMSLOG_INVENTORY_ERROR
--==========================================================================
EXEC [SP_DMS_INVENTORY_ERROR] @FileType,@ACDealerID,@ClientDealerID,@DMSType,@StockNumber,@InventoryDate,@StockType,@DMSStatus,@InvoicePrice,@CostPack,
@SalesCost,@HoldbackAmount,@ListPrice,@MSRP,@LotLocation,@TagLine,@Certification,@CertificationNumber,@VehicleVIN,@VehicleYear,@VehicleMake,@VehicleModel,@VehicleModelCode,
@VehicleTrim,@VehicleSubTrimLevel,@Classification,@TypeCode,@VehicleMileage,@EngineCylinderCount,@TransmissionType,@VehicleExteriorColor,@VehicleInteriorColor,
@CreatedDate,@LastModifiedDate,@ModifiedFlag,@InteriorColorCode,@ExteriorColorCode,@PackageCode,@CodedCost,@Air,@OrderType,@AgeDays,@OutstandingRO,
@DlrAccessoryRetail,@DlrAccessoryCost,@DlrAccessoryDesc,@ModelDesc,@Memo1,@Memo2,@Weight,@FloorPlan,@Purchaser,@PurchasedFrom,@InternetPrice,
@InventoryAcctDollar,@VehicleType,@DealerAccessoryCode,@AllInventoryAcctDollar,@BestPrice,@InStock,@AccountingMake,@GasDiesel,@BookValue,
@FactoryAccessoryDescription,@TotalReturn,@TotalCost,@SS,@VehicleBody,@StandardEquipment,@Account,@CalculatedPrice,@OriginalCost,@AccessoryCore,
@OtherDollar,@PrimaryBookValue,@AmountDue,@LicenseFee,@ICompany,@InvenAcct,@Field23,@Field24,@SalesCode,@BaseRetail,@BaseInvAmt,@CommPrice,@Price1,
@Price2,@StickerPrice,@TotInvAmt,@OptRetail,@OptInvAmt,@OptCost,@Options1,@Category,@Description,@Engine,@ModelType,@FTCode,@Wholesale,@Retail,@Draft,
@ERRORNUMBER,@ERRORSEVERITY,@ERRORTABLE,@ERRORSTATE,@ERRORPROCEDURE,@ERRORLINE,@errormessage,@FtpDate
END CATCH
-- PRINT @errornumber;
-- PRINT @errorseverity;
-- PRINT @errortable;
-- PRINT @errorprocedure;
-- PRINT @errorline;
-- PRINT @errormessage;
-- PRINT @errorstate;
set @myerror = @@ERROR;
-- This -- PRINT statement -- PRINTs 'Error = 0' because
-- @@ERROR is reset in the IF statement above.
-- PRINT N'Error = ' + @myerror;
set @Inventoryid = scope_identity();
-- PRINT @Inventoryid;
--==========================================================================
-- INSERT INTO DMS_INVENTORY_DETAILS (CHILD TABLE)
--==========================================================================
BEGIN TRY
INSERT INTO [dbo].[DMS_INVENTORY_DETAILS]
DMSInventoryID,
StockType,
DMSStatus,
LotLocation,
TagLine,
Certification,
CertificationNumber,
CreatedDate,
LastModifiedDate,
ModifiedFlag,
PackageCode,
OrderType,
AgeDays,
OutstandingRO,
Memo1,
Memo2,
Purchaser,
PurchasedFrom,
DealerAccessoryCode,
InStock,
AccountingMake,
SS,
Account,
AccessoryCore,
ICompany,
InvenAcct,
Field23,
Field24,
SalesCode,
Draft,
FTCode,
FtpDate
VALUES (
@InventoryID,
@StockType,
@DMSStatus,
@LotLocation,
@TagLine,
@Certification,
@CertificationNumber,
@CreatedDate,
@LastModifiedDate,
@ModifiedFlag,
@PackageCode,
@OrderType,
@AgeDays,
@OutstandingRO,
@Memo1,
@Memo2,
@Purchaser,
@PurchasedFrom,
@DealerAccessoryCode,
@InStock,
@AccountingMake,
@SS,
@Account,
@AccessoryCore,
@ICompany,
@InvenAcct,
@Field23,
@Field24,
@SalesCode,
@Draft,
@FTCode,
@FtpDate
END TRY
BEGIN CATCH
SELECT
@errornumber = ERROR_NUMBER(),
@errorseverity = ERROR_SEVERITY(),
@errorstate = ERROR_STATE(),
@errortable = 'DMS_INVENTORY_DETAILS',
@errorprocedure = ERROR_PROCEDURE(),
@errorline = ERROR_LINE(),
@errormessage = ERROR_MESSAGE();
--==========================================================================
-- INSERT ERRORS INTO DMSLOG_INVENTORY_ERROR
--==========================================================================
EXECUTE [SP_DMS_INVENTORY_ERROR] @FileType,@ACDealerID,@ClientDealerID,@DMSType,@StockNumber,@InventoryDate,@StockType,@DMSStatus,@InvoicePrice,@CostPack,
@SalesCost,@HoldbackAmount,@ListPrice,@MSRP,@LotLocation,@TagLine,@Certification,@CertificationNumber,@VehicleVIN,@VehicleYear,@VehicleMake,@VehicleModel,@VehicleModelCode,
@VehicleTrim,@VehicleSubTrimLevel,@Classification,@TypeCode,@VehicleMileage,@EngineCylinderCount,@TransmissionType,@VehicleExteriorColor,@VehicleInteriorColor,
@CreatedDate,@LastModifiedDate,@ModifiedFlag,@InteriorColorCode,@ExteriorColorCode,@PackageCode,@CodedCost,@Air,@OrderType,@AgeDays,@OutstandingRO,
@DlrAccessoryRetail,@DlrAccessoryCost,@DlrAccessoryDesc,@ModelDesc,@Memo1,@Memo2,@Weight,@FloorPlan,@Purchaser,@PurchasedFrom,@InternetPrice,
@InventoryAcctDollar,@VehicleType,@DealerAccessoryCode,@AllInventoryAcctDollar,@BestPrice,@InStock,@AccountingMake,@GasDiesel,@BookValue,
@FactoryAccessoryDescription,@TotalReturn,@TotalCost,@SS,@VehicleBody,@StandardEquipment,@Account,@CalculatedPrice,@OriginalCost,@AccessoryCore,
@OtherDollar,@PrimaryBookValue,@AmountDue,@LicenseFee,@ICompany,@InvenAcct,@Field23,@Field24,@SalesCode,@BaseRetail,@BaseInvAmt,@CommPrice,@Price1,
@Price2,@StickerPrice,@TotInvAmt,@OptRetail,@OptInvAmt,@OptCost,@Options1,@Category,@Description,@Engine,@ModelType,@FTCode,@Wholesale,@Retail,@Draft,
@ERRORNUMBER,@ERRORSEVERITY,@ERRORTABLE,@ERRORSTATE,@ERRORPROCEDURE,@ERRORLINE,@errormessage,@FtpDate
END CATCH
--==========================================================================
-- INSERT INTO DMS_INVENTORY_AMOUNT (CHILD TABLE)
--==========================================================================
BEGIN TRY
INSERT INTO [dbo].[DMS_INVENTORY_AMOUNT]
DMSInventoryID,
AllInventoryAcctDollar,
OtherDollar,
PrimaryBookValue,
AmountDue,
LicenseFee,
CalculatedPrice,
OriginalCost,
BookValue,
TotalReturn,
TotalCost,
DlrAccessoryRetail,
DlrAccessoryCost,
DlrAccessoryDesc,
InternetPrice,
InventoryAcctDollar,
BestPrice,
Weight,
FloorPlan,
CodedCost,
InvoicePrice,
CostPack,
SalesCost,
HoldbackAmount,
ListPrice,
MSRP,
BaseRetail,
BaseInvAmt,
CommPrice,
Price1,
Price2,
StickerPrice,
TotInvAmt,
OptRetail,
OptInvAmt,
OptCost,
Wholesale,
Retail,
FtpDate
VALUES (
@InventoryID,
@AllInventoryAcctDollar,
@OtherDollar,
@PrimaryBookValue,
@AmountDue,
@LicenseFee,
@CalculatedPrice,
@OriginalCost,
@BookValue,
@TotalReturn,
@TotalCost,
@DlrAccessoryRetail,
@DlrAccessoryCost,
@DlrAccessoryDesc,
@InternetPrice,
@InventoryAcctDollar,
@BestPrice,
@Weight,
@FloorPlan,
@CodedCost,
@InvoicePrice,
@CostPack,
@SalesCost,
@HoldbackAmount,
@ListPrice,
@MSRP,
@BaseRetail,
@BaseInvAmt,
@CommPrice,
@Price1,
@Price2,
@StickerPrice,
@TotInvAmt,
@OptRetail,
@OptInvAmt,
@OptCost,
@Wholesale,
@Retail,
@FtpDate
END TRY
BEGIN CATCH
SELECT
@errornumber = ERROR_NUMBER(),
@errorseverity = ERROR_SEVERITY(),
@errortable = 'DMS_INVENTORY_AMOUNT',
@errorstate = ERROR_STATE(),
@errorprocedure = ERROR_PROCEDURE(),
@errorline = ERROR_LINE(),
@errormessage = ERROR_MESSAGE();
--==========================================================================
-- INSERT ERRORS INTO DMSLOG_INVENTORY_ERROR
--==========================================================================
EXEC [SP_DMS_INVENTORY_ERROR] @FileType,@ACDealerID,@ClientDealerID,@DMSType,@StockNumber,@InventoryDate,@StockType,@DMSStatus,@InvoicePrice,@CostPack,
@SalesCost,@HoldbackAmount,@ListPrice,@MSRP,@LotLocation,@TagLine,@Certification,@CertificationNumber,@VehicleVIN,@VehicleYear,@VehicleMake,@VehicleModel,@VehicleModelCode,
@VehicleTrim,@VehicleSubTrimLevel,@Classification,@TypeCode,@VehicleMileage,@EngineCylinderCount,@TransmissionType,@VehicleExteriorColor,@VehicleInteriorColor,
@CreatedDate,@LastModifiedDate,@ModifiedFlag,@InteriorColorCode,@ExteriorColorCode,@PackageCode,@CodedCost,@Air,@OrderType,@AgeDays,@OutstandingRO,
@DlrAccessoryRetail,@DlrAccessoryCost,@DlrAccessoryDesc,@ModelDesc,@Memo1,@Memo2,@Weight,@FloorPlan,@Purchaser,@PurchasedFrom,@InternetPrice,
@InventoryAcctDollar,@VehicleType,@DealerAccessoryCode,@AllInventoryAcctDollar,@BestPrice,@InStock,@AccountingMake,@GasDiesel,@BookValue,
@FactoryAccessoryDescription,@TotalReturn,@TotalCost,@SS,@VehicleBody,@StandardEquipment,@Account,@CalculatedPrice,@OriginalCost,@AccessoryCore,
@OtherDollar,@PrimaryBookValue,@AmountDue,@LicenseFee,@ICompany,@InvenAcct,@Field23,@Field24,@SalesCode,@BaseRetail,@BaseInvAmt,@CommPrice,@Price1,
@Price2,@StickerPrice,@TotInvAmt,@OptRetail,@OptInvAmt,@OptCost,@Options1,@Category,@Description,@Engine,@ModelType,@FTCode,@Wholesale,@Retail,@Draft,
@ERRORNUMBER,@ERRORSEVERITY,@ERRORTABLE,@ERRORSTATE,@ERRORPROCEDURE,@ERRORLINE,@errormessage,@FtpDate
END CATCH
--==========================================================================
-- INSERT INTO DMS_INVENTORY_VEHICLE (CHILD TABLE)
--==========================================================================
BEGIN TRY
INSERT INTO [dbo].[DMS_INVENTORY_VEHICLE]
DMSInventoryID,
InteriorColorCode,
ExteriorColorCode,
Air,
ModelDesc,
VehicleType,
VehicleVIN,
VehicleYear,
VehicleMake,
VehicleModel,
VehicleModelCode,
VehicleTrim,
VehicleSubTrimLevel,
Classification,
TypeCode,
VehicleMileage,
FtpDate,
EngineCylinderCount
VALUES (
@InventoryID,
@InteriorColorCode,
@ExteriorColorCode,
@Air,
@ModelDesc,
@VehicleType,
@VehicleVIN,
@VehicleYear,
@VehicleMake,
@VehicleModel,
@VehicleModelCode,
@VehicleTrim,
@VehicleSubTrimLevel,
@Classification,
@TypeCode,
@VehicleMileage,
@FtpDate,
@EngineCylinderCount
END TRY
BEGIN CATCH
SELECT
@errornumber = ERROR_NUMBER(),
@errorseverity = ERROR_SEVERITY(),
@errortable = 'DMS_INVENTORY_VEHICLE',
@errorstate = ERROR_STATE(),
@errorprocedure = ERROR_PROCEDURE(),
@errorline = ERROR_LINE(),
@errormessage = ERROR_MESSAGE();
--==========================================================================
-- INSERT ERRORS INTO DMSLOG_INVENTORY_ERROR
--==========================================================================
EXEC [SP_DMS_INVENTORY_ERROR] @FileType,@ACDealerID,@ClientDealerID,@DMSType,@StockNumber,@InventoryDate,@StockType,@DMSStatus,@InvoicePrice,@CostPack,
@SalesCost,@HoldbackAmount,@ListPrice,@MSRP,@LotLocation,@TagLine,@Certification,@CertificationNumber,@VehicleVIN,@VehicleYear,@VehicleMake,@VehicleModel,@VehicleModelCode,
@VehicleTrim,@VehicleSubTrimLevel,@Classification,@TypeCode,@VehicleMileage,@EngineCylinderCount,@TransmissionType,@VehicleExteriorColor,@VehicleInteriorColor,
@CreatedDate,@LastModifiedDate,@ModifiedFlag,@InteriorColorCode,@ExteriorColorCode,@PackageCode,@CodedCost,@Air,@OrderType,@AgeDays,@OutstandingRO,
@DlrAccessoryRetail,@DlrAccessoryCost,@DlrAccessoryDesc,@ModelDesc,@Memo1,@Memo2,@Weight,@FloorPlan,@Purchaser,@PurchasedFrom,@InternetPrice,
@InventoryAcctDollar,@VehicleType,@DealerAccessoryCode,@AllInventoryAcctDollar,@BestPrice,@InStock,@AccountingMake,@GasDiesel,@BookValue,
@FactoryAccessoryDescription,@TotalReturn,@TotalCost,@SS,@VehicleBody,@StandardEquipment,@Account,@CalculatedPrice,@OriginalCost,@AccessoryCore,
@OtherDollar,@PrimaryBookValue,@AmountDue,@LicenseFee,@ICompany,@InvenAcct,@Field23,@Field24,@SalesCode,@BaseRetail,@BaseInvAmt,@CommPrice,@Price1,
@Price2,@StickerPrice,@TotInvAmt,@OptRetail,@OptInvAmt,@OptCost,@Options1,@Category,@Description,@Engine,@ModelType,@FTCode,@Wholesale,@Retail,@Draft,
@ERRORNUMBER,@ERRORSEVERITY,@ERRORTABLE,@ERRORSTATE,@ERRORPROCEDURE,@ERRORLINE,@errormessage,@FtpDate
END CATCH
--==========================================================================
-- MOVE CURSUR TO NEXT RECORD
--==========================================================================
FETCH NEXT FROM Inventory_Cursor
INTO @FileType ,
@ACDealerID ,
@ClientDealerID ,
@DMSType ,
@StockNumber ,
@InventoryDate ,
@StockType ,
@DMSStatus ,
@InvoicePrice ,
@CostPack ,
@SalesCost ,
@HoldbackAmount ,
@ListPrice ,
@MSRP ,
@LotLocation ,
@TagLine ,
@Certification ,
@CertificationNumber ,
@VehicleVIN ,
@VehicleYear ,
@VehicleMake ,
@VehicleModel ,
@VehicleModelCode ,
@VehicleTrim ,
@VehicleSubTrimLevel ,
@Classification ,
@TypeCode ,
@VehicleMileage ,
@EngineCylinderCount ,
@TransmissionType ,
@VehicleExteriorColor ,
@VehicleInteriorColor ,
@CreatedDate ,
@LastModifiedDate ,
@ModifiedFlag ,
@InteriorColorCode ,
@ExteriorColorCode ,
@PackageCode ,
@CodedCost ,
@Air ,
@OrderType ,
@AgeDays ,
@OutstandingRO ,
@DlrAccessoryRetail ,
@DlrAccessoryCost ,
@DlrAccessoryDesc ,
@ModelDesc ,
@Memo1 ,
@Memo2 ,
@Weight ,
@FloorPlan ,
@Purchaser ,
@PurchasedFrom ,
@InternetPrice ,
@InventoryAcctDollar ,
@VehicleType ,
@DealerAccessoryCode ,
@AllInventoryAcctDollar ,
@BestPrice ,
@InStock ,
@AccountingMake ,
@GasDiesel ,
@BookValue ,
@FactoryAccessoryDescription ,
@TotalReturn ,
@TotalCost ,
@SS ,
@VehicleBody ,
@StandardEquipment ,
@Account ,
@CalculatedPrice ,
@OriginalCost ,
@AccessoryCore ,
@OtherDollar ,
@PrimaryBookValue ,
@AmountDue ,
@LicenseFee ,
@ICompany ,
@InvenAcct ,
@Field23 ,
@Field24 ,
@SalesCode ,
@BaseRetail ,
@BaseInvAmt ,
@CommPrice ,
@Price1 ,
@Price2 ,
@StickerPrice ,
@TotInvAmt ,
@OptRetail ,
@OptInvAmt ,
@OptCost ,
@Options1 ,
@Category ,
@Description ,
@Engine ,
@ModelType ,
@FTCode ,
@Wholesale ,
@Retail ,
@Draft ,
@flatfile_createddate,
@FtpDate;
END
CLOSE Inventory_Cursor;
DEALLOCATE Inventory_Cursor;
SET ANSI_PADDING OFF
END
Arunraj Kumar

Thank you.
And another question if the data is already there in the child table if i try to load alone it must delete the old data in the child tablee and need to get load the new data and
How to do this ?
Arunraj Kumar
You can do that with an IF EXISTS condition
IF EXISTS (SELECT 1
FROM YourChildTable c
INNER JOIn @temptable t
ON c.Bkey1 = t.Bkey1
AND c.Bkey2 = t.Bkey2
DELETE t
FROM YourChildTable c
INNER JOIn @temptable t
ON c.Bkey1 = t.Bkey1
AND c.Bkey2 = t.Bkey2
INSERT INTO YourChildTable
where Bkey1,Bkey2 etc forms the business key of the table
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

I can no longer send emails from my mac yahoo business account, but can send them directly from yahoo. just not from mac mail. I've been able to send emails perfectly fine until today. Help!

I can no longer send emails from my mac yahoo business account, but can send them directly from yahoo. just not from mac mail. I've been able to send emails perfectly fine until today. I've been on the phone with yahoo mail and they've verified that my account settings are correct and I can send email from yahoo. I can receive emails via Mac mail, but just can't send them. An error message appears that says:
"Sending the message content to the server failed." I can't send emails from my Mac desktop, iphone or ipad. Any suggestions! Help! I'm a Mac rookie and so frustrated! Thanks.

Please read and begin using Can receive email, but not send email. I had a similar issue with Comcast mail (could receive by not send) and found my answer in this letter. For me it took resetting the outgoing mail and telling the system to use a password when sending outgoing mail. If you need help with that please advise and I'll tell you where to look.

Direct selection path tool deletes entire path

Need to delete part of a path, but when I select the points I want to delete (or a line between two points) with the Direct Selection tool (not Path Selection) and hit "delete" the entire path deletes!
This appears to be a new CS5 default on my copy.
Any thoughts?

Thanks, layer needed to be selected. Don't recall this being an issue in CS3.
Is this a new "feature" ;-)

Direct selection tool won't show the handles when clicking the path.

When I draw a line, no matter if it's done with pen, pencil or brush tool, and try to select a point with the direct selection tool, it won't make a selection, I can't get the handles activated. They don't show at all. It only shows the line transform handle. This happens only in one certain file. When I open a different file or create a new one, the problem doesn't exist.

Acca,
Ctrl/Cmd+H.
It toggles View>Show/Hide Edges.
The key combination Ctrl/Cmd+H is the most vulnerable one, completely surrounded by other key combinations all only waiting to wreck things when you look the other way. Or you may have tried to use one of them, then just (thought you) repeated it when it (seemingly) failed to work the first time.

Direct Selection Tool will not choose individual "path" anchor points

Photohsop CS4, 11.0.1
Mac OSX 10.4.11, MacPro, Dual-Core Intel Xeon, 2.66 GHz, 9GB RAM, NVIDIA GeForce 7300 GT-256 MB VRAM, 500GB Startup HD, 500GB HD (wlhere file resides and scratch disk), OpenGL enabled
I am unable to select individual anchor points and line segments of a path, although the anchor points appear to be individually highlighted, copying them copies the entire path, not just the selected points, and deleting them deletes the entire path, not just the selected points. In effect the "hollow arrow" direct selection tool is working like the "solid arrow path selection" tool.
I ran Disk Warrior, repaired disk permissions. I deleted old preferences by renaming file with Photoshop closed, and then restarted photoshop.
After calling Adobe Tech Support, they are recommending I reinstall the entire CS4 suite, which I am hesitant to do. At the least I will lose all of my menu preferences in all programs. Should I just follow their advice and reinstall CS4?
Thanks.

When you click on it with path selection tool (black arrow) which option is enabled in options bar at top - add, subtract, intersect, or exclude?
Can you combine paths?
Have you tried drawing a new path and selecting points on it?
Can you still add and subtract points?
Edit: Can you pull on the bezier handles?
Edit: is it a vector mask or a standalone path?
I'm trying to simulate your problem – in the meantime I'm brainstorming, not sure how else to help. It seems like something restarting the program would fix.
What about quitting the app. Then going to User: Library: Prefs: Adobe Photoshop CS4 paths, trash it then restart?
Message was edited by: Printer_Rick: Added Edit: Can you pull on the bezier handles?

Direct Select issue - just me or a bug?

Similar Messages

Maybe you are looking for