Direct Transfere between 2 Calls each on a different DN

Dears,
I have this client that used to have a PBX and now switched to IP telephony with CUCM 9.x
The operator used to have a feature that allowed him to do a direct transfere between 2 external calls while he himself steps out of the call (No Conferance).
I Need something similar to this other than starting a call with a Meet-Me number and transfering both call to that number. ( The Operators a Dum and found this proceedure very complicated and hard).
I Need a 1 button step solution like a Direct Transfere.
Thanks for your Help

Reply From Cisco TAC:
You need to enable this option “Join Across Lines” under phone configuration page >> change its value to ON >> save >> Reset the phone.
Once you enable that feature, and you have 2 active calls on the same phone, press on the JOIN softkey for the first call, then press on the second line, this will make a conference call.
Please make sure this parameter “Drop Ad Hoc Conference” is set to “never”.
Form CUCM webpage >> system >> Service Parameter >> select any server >> select “Call Manager” service >> Change this parameter Drop Ad Hoc Conference to “never” >> save.
When the conference start, the user can leave without any problem. (I have tested that in the lab and it is working fine).

Similar Messages

My ipod touch 4 stops playing and re starts itself while playing one tune from the 2011 Manheim Steamroller Christmas album. It also will not work with Tony Bennett Duets II. It calls each tune a different album giving it a different place in the play l

My ipod touch 4 stops and restarts itself while playing one tune from the Manheim Steamroller Christmas album. It will not work with Tony Bennett's Duets II. It calls each tune a different album. All other music appears to work fine. Both of the mentioned albums were loaded from CD not from Itunes. Any ideas?

My ipod touch 4 stops and restarts itself while playing one tune from the Manheim Steamroller Christmas album. It will not work with Tony Bennett's Duets II. It calls each tune a different album. All other music appears to work fine. Both of the mentioned albums were loaded from CD not from Itunes. Any ideas?

PSTN call transferring between sites

We are planning on having 2 sites
Site A: Main Lync server with mediation/frontend roles. Edge server. SIP trunk
Site B: SBA with PRI
Sites are to be connected with a VPN
We will have users at Site A that will take a call on the PSTN and need to be able to transfer that call to users at Site B. Site B has no receptionist, their receptionist is at Site A.
My initial plan was to have every users line uri set up with the phone number and extension, no DIDs. Site A could be tel:+19997654321;ext=1000 and Site B could be tel:+19991234567;ext=2000.
My question is what is the call path for transferring when a call comes in on Site A PSTN -> Site A User -> Site B User?
Will this call flow through the VPN to Site B from Site A and be using up one of the SIP trunks for the duration?
What happens if I make users at Site B have DIDs instead of extensions for their line uri? Could the call be transferred to the PRI and not have to flow through the VPN?

Hi kuptzlocher,
Have a look at the following picture.
Based on my understanding, if the number was already in a globally unique format (E.164), then Reverse number lookup will query it :
Is this number assigned to anything in Lync? If it is, then Lync will be able to translate the number to a SIP URI and route the call directly to inbound routing based on said URI where the process will then end.(In other words, it
will through the VPN)
Best regards,
Eric

Define Shipping Data for Stock Transfers Between Storage Locations

Hi Guru,
Can i know what is the purpose to maintain Customer, SHipping data for each storage location for the STO between storage location?
Purchasing --> Purchase Order -->
Set up Stock Transport Order-->
Set Up Stock Transfer Between Storage Locations-->
Define Shipping Data for Stock Transfers Between Storage Locations

The Sales org, Distribution channel, Shipping point, Vendor and Customer are maintained to created the delivery.
It is for the transfer of stock between storage locations with any movement type.
Eg: When you do a 311 movement type from Sloc A to Sloc B, then it will create a inbound delivery with the Vendor specified for Sloc A and an outbound delivery from Sloc B with the Customer specified assuming the customer and the vendor as the Plant.
You have to create a internal Vendor and Customer.
Hope it helps.

Direct connection between 2 clients without any configuration!

I wan to make a system act like hamachi or logmein (websever & clients).
I have a webserver on the internet and two client from different networks connected to this webserver, now i want to make directly connection between these clients without any configuration on router. I think it is possible because all infomation about clients network could be got from http request which they send to server. But i don't know what exact fields in the header of http request that i need and how to set them to create connection between clients. I need some ideas about this issue.
Edited by: tulous on Nov 20, 2008 7:40 PM
Edited by: tulous on Nov 20, 2008 7:41 PM

tulous wrote:
I know, so if you want to use a remote control tool such as: VNC, remote desktop you must config on router or server. But even if you had a proxy(permit port 80) when you type www.sun.com you will get data from it, this data was sent from Sun to your proxy and in some way the data was return to your browser. So i think if we have enough information(it come from the webserver) we could init a connection between 2 client. An example of this is Hamachi.
At first 2 hamachi clients connect to a server of hamachi, when they have their id, a tunnel between 2 clients was established without any configuration on proxy(certainly that server did not deny port of hamachi). From now 2 clients can exchange data not through the server. The same in logmein, you can remote desktop any where with zero configuration, but the speed is guarantee because they contact to server for query information, but the data was transmited directly. Sorry if i make mistake.It doesn't work the way you think.
There is a proxy or you have to have one side listening with a ServerSocket and have ports opened as needed. You can't create a Socket connection on server A between clients B and C and then pass it off to clients B and C and magically they just talk to each other.
It does not work that way. It is impossible to do it that way.

Does Siri give turn by turn directions while on a call?

Does Siri give turn by turn directions while on a call?

If the iPad is cellular 4G.... Yes it does.
iOS 6 features and capabilities vary between devices, with some features available only with certain devices and models.
iPhone
iPad
iPod touch
iOS 6 feature
3GS
4
4S
5
2nd
generation
3rd
generation
4th
generation
iPad
mini
4th
generation
5th
generation
Maps: Flyover
✓
✓
✓
✓
✓
✓
✓
Maps: Turn-by-turn1
✓
✓
✓4
✓4
✓4
✓4
Siri2
✓
✓
✓
✓
✓
✓
Facebook integration
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Shared Photo Streams
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Passbook
✓
✓
✓
✓
✓
✓
Camera: Panorama
✓
✓
✓
Camera: Snap stills while recording
✓
FaceTime over cellular3
✓
✓
✓
✓
✓

File transfers between two 10.9 Macs over FRITZ!Box AVM 7270 painfully slow, any ideas?

I am using a FRITZ!Box AVM 7270 as my WLAN Router and Internet access point.
Internet download rates are excellent (6 MB/sec), e.g. iTunes HD trailer playback starts immediately. However, local WiFi file transfers between my two Macs (2011 MB Air, 2012 Mac Mini Server) are embarrassingly slow. I typically see 60 kbit per second (even when no other transfers, up- or downloads occur). Copying just one 50 MB PDF from one Mac to another takes ten minutes.
The FRITZ interface shows that both Macs are connected using 802.11n (104 Mbit/s), signal strength is good.
I first suspected a problem with Apple's AFP protocol that was mentioned in several forums. But in the meantime, I have upgraded both Macs to Mavericks, which uses SMB as default. But even connecting via SMB "smb://mac1.local" has the same results: Dead-slow transfers. Activity Monitor shows some peaks at 150 kb/s when transferring files, but it's almost dead in between.
The problem occurs when copying in both directions (Mac Mini <> MB Air).
Any ideas?

I think you're right!
Thanks for the tip!:-)
Intelligent Devices will drive us Crazy yet... o wait... too late! :-D

Direct link between planned/production order & Stock transport order

Hello,
We have the following situation.
Plant A = ordering/receiving plant
Plant B = producing/selling plant
Material is stock material in plant A (reorder point planning). If required, plant A creates intercompany purchase order with plant B as vendor.
Standard SAP behaviour: MRP run will create planned order in plant B but there is no direct link between the intercompany purchase order and the planned order. It can as well be that this planned order combines several requirements.
Our requirement: Have a 1 to 1 relationship (and a direct link) between the intercompany purchase order and the planned order (and also with the production order which will be generated afterwards). The solution we think about: After creation of the purchase order, create firmed planned order (or immediately production order) by means of a bapi.
My question is whether there are standard SAP solutions for this?
Best regards
Kurt

When customer give order and then it creates sales order.
depends on material - I mean Finshed good or Comapny own product ,
If it is outside material ,it creates Purchase req and then Purchase order.
if it is company material ,it creates Planned order and then production order.
Check the transaction you will get better idea.
MD04
MD02
MDBT
LS24
LS26
MMBE
CO01
CO02
CO03
CS03
ME51N
ME52N
ME21N
ME22N
VA01
VA02
VA03
Reward Points if it is helpful
Thanks
Seshu

Direct link between SES to activity in tables?

hello all
is there a way to have a direct link between a Service entry sheet and its activities in tables?
so far, the only link we found is the following:
table ESSR enter SES number: get package number and enter it in table ESLL. this will give me a sub package which I can enter in the package number by running a search on table ESLL again.
can i get this process by making only one link instead of twice?
thanks
Alisa

lets see: service entry sheets have activity lines.
the SES is in table ESSR while the activity lines are in table ESLL.
in order to make the link between the SES and its own activity lines, I use the package number from table ESSR but, this package number, is NOT a direct link.
meaning: the steps I follow are like this:
1) enter SES number in table ESSR and get Package number
2) enter package number in table ESLL and get SUB package number
3) enter SUB package number in field package number in table ESLL: this will give me finally the activities related to the SES.
what I want, is a direct link: SES, package number, activity (or any direct link is fine)

Calling each sheet in an excel sheet as csv file in a model

Hi All,
I have an excel sheet as an source having 5 sheets.
So I need to call each sheet in the excel sheet in different models as an csv file.
Thank you in advance.
Regards,
tvmk

Using the normal reverse engineering you should be able to get at the data in the sheets. In the definition of the data model for Excel you can put the "table name" - this might be the Named Range - or it can be the (Excel) "system table" called the same as the Sheet. In English Excel, you get one system table called Sheet1$, Sheet2$...
If you make your resource name a variable, then populate the variable with teh appropriate value before accessing the "table", you should be able to access it dynamically. Then all you need do is write a procedure which reads the Excel system tables to query for the sheet names, and then to iterate through them.

Material transfers between plants and storage locations report

Hello experts.
I´m looking for some help.
Actually i am looking for a report that show information about material transfers between plants and storage locations. Is there any report that shows the source of the material (plant, storage location) and also shows the target (plant, storage location).
Thanks for your help.

Hi,
Though you may not get report for the same , but you can narrow down the check by using the table MSEG or MB51 using the moment types like 311 643 (sd delivery moments )which are for stock transfers .
or if you want storage location stock many reports are available like MMBE, or MB53 etc.
Regards

Doubt : retaining the value between the calls

hi,
Which statement would you use to declare a variable, within a Function Module/Form-routine, so as it will retain the value between the calls?"
Gaurav

Dear Gaurav,
To retain the same value outside a function module, you can define a variable with the same name as the exporting parameter in a function module. However in case of Subroutines you can pass the value by reference as any change in the formal parameters will be reflected in the actual parameters.
Check the following links for further clarification:
http://help.sap.com/saphelp_nw70/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db975c35c111d1829f0000e829fbfe/content.htm
Regards,
Rajesh K Soman
<b>Please reward points if found helpful.</b>

I ordered Office 2011 with my MBA, but only the trial version came installed - and no product key was ever emailed to me or included in the shipment. Three calls each to Apple and Microsoft have not solved this.

I ordered Microsoft Office 2011 with my Macbook Air, but only the trial version came installed - and no product key for the full version was ever emailed to me or included in the shipment. Three calls each to Apple and Microsoft have not solved this and I am at wit's end. Each company blames it on the other - I don't care whose fault it is, I just want the product key so I can use Microsoft Office! Please help.

You should have received a DVD in the box (with the MBA).
See: https://discussions.apple.com/message/12805337#12805337
Call AppleCare (they need to send you a DVD, which has the Product Key printed on the sleeve).

My phones unable to call each other internally.what 's missing in my configuration? please help me

hi everyone!
I did not really know in TOIP . Can someone look at my configuration attached and tell me what 's missing?
For now , I'm just at the stage where my phones must call each other internally.
That is to say, the user who has the number 100 , should be able to call the one with the number 101 .
My phones are recorded correctly, there has intonnation , but they do not casually refer to them internally
please what is wrong with my setup ?
CME: cisco 3925
ip phone types: 7841 and 9971
here is the status of the message that appears on the IP phone: File Not Found: Ringlist-wb.xml

Hi, Sreekanth,
Thank you for your Help,
Nothing happens when I order these tapes and when I initiate a call.
i've somes errors messages on my 9971:
Error Updating Local
File Not Found: United_States/g4-tones.xml
Upgrade Reject: HW comptat faillure. Must use 9.3(2) or later release on this phone
VPN Error: VPN is not Configured.
No trust List installed
Updating Trust List
CUCM closed TCP connection
Is this that prevents calls ? I can not find the firmware
United_States/g4-tones.xml
Kind regards

Direct Connection between clients using sockets

Hi, I'm a new user and i have a problem with sockets:
The question is how can i directly connect two users that are already connected to a server in other machine???
I mean
user1 is connected to server
user2 is connected to server
user1 tries to communicate with user1 but don't want to use the server, and the server only provides the client1's ip
I first thought to do this:
user2 asks to server for the info of a client1-server waiting for connections, and i think it could work fine, but only if the ports are not closed by firewall, because client-server will be running in a transparent mode for user and user may not know anything about servers, sockets, ports, etc. the user only will work with a gui or something else and that's all
Does anybody know what can i do to make this possible???
PD
Sorry for my bad English

It can be implemented like you said. Make one of the clients open a serversocket and pass the ip and port number through the server to the other client with information on where to connect.
If you're going to use direct connection between clients a lot then I would recommend that every client open a default serversocket at startup and register that information with the server and then every other client can ask the server for the ip and port to whatever client they wish to open a direct connection to.
Be aware that clients often are behind NATs and firewalls, so if need to deal with those issues you got to use hole punching (http://en.wikipedia.org/wiki/hole_punching) - pref on a known port like 80 - and to deal with the less frequently used application firewalls you can use http encapsulation in addition.

Direct Transfere between 2 Calls each on a different DN

Similar Messages

Maybe you are looking for